Quantum photonics is an emerging field of photonics where single photons are used for applications in quantum computation, quantum communication, and quantum sensing. One of the key enablers of these new technologies is colour centres. Colour centres are isolated defects in crystals that are able to emit single photons and have spin properties that can be exploited for quantum technologies. These properties include high brightness, low photo-bleaching, and room-temperature optically accessible spins. Wide-bandgap semiconductors such as diamond, silicon carbide and gallium nitride, and 2D materials such as h-BN and TMDs are of particular interest as host materials for colour centres. Numerous light emitters have been discovered and documented in these materials. Colour centres typically occur naturally in semiconductors and are often introduced during the growth process. This random distribution of defects is clearly not desirable for making quantum devices as it makes it difficult to process the materials and introduce structures that interact with these defects such as electrical contacts. The key technology that allows for the precise engineering of colour centres and other quantum defects in materials is ion implantation. Ion implantation utilizes energetic ion beams for the modification of electrical, optical, and magnetic properties of materials. It is a key processing step that has been widely used in the semiconductor industry for doping of semiconductors and for creating buried oxides. Ion implanters that are currently used in industry are designed for uniform wafer-level implantation of relatively large fluences of ions with high beam currents. The new quantum technologies, such as quantum computing, require a major paradigm shift in the way in which ion implantation is performed.
Quantum photonics is an emerging field of photonics where single photons are used for applications in quantum computation, quantum communication, and quantum sensing. One of the key enablers of these new technologies is colour centres. Colour centres are isolated defects in crystals that are able to emit single photons and have spin properties that can be exploited for quantum technologies. These properties include high brightness, low photo-bleaching, and room-temperature optically accessible spins. Wide-bandgap semiconductors such as diamond, silicon carbide and gallium nitride, and 2D materials such as h-BN and TMDs are of particular interest as host materials for colour centres. Numerous light emitters have been discovered and documented in these materials. Colour centres typically occur naturally in semiconductors and are often introduced during the growth process. This random distribution of defects is clearly not desirable for making quantum devices as it makes it difficult to process the materials and introduce structures that interact with these defects such as electrical contacts. The key technology that allows for the precise engineering of colour centres and other quantum defects in materials is ion implantation. Ion implantation utilizes energetic ion beams for the modification of electrical, optical, and magnetic properties of materials. It is a key processing step that has been widely used in the semiconductor industry for doping of semiconductors and for creating buried oxides. Ion implanters that are currently used in industry are designed for uniform wafer-level implantation of relatively large fluences of ions with high beam currents. The new quantum technologies, such as quantum computing, require a major paradigm shift in the way in which ion implantation is performed.
To investigate new pathways for numerous quantum technologies it is necessary to efficiently fabricate various interesting materials. Single photon sources that are optically and electrically triggerable are the fundamental building blocks required to push the boundaries of several applications, such as realising secure communication technologies. Accordingly, various platforms are being investigated for generation of single photon emitters (SPEs). Diamond is one platform of great interest, due to its ability to host several photostable, optically active SPE defects that can operate at room temperature. Numerous diamond defects have been studied extensively, including the Nitrogen vacancy (NV), Silicon vacancy (SiV) and, recently, the Germanium vacancy (GeV) colour centres. All were shown to be robust room temperature SPEs. Despite promising reports on quantification and applications of diamond-based defects, the search continues to find an emitter that can excel at most applications. \nAnother important factor for the utility of colour centres is the method of excitation. While optical pumping is common practice, the ability to electrically excite emitters is highly desired for optoelectronic applications. Several reports exist on the fabrication and characterisation of electrical device structures of various materials, including Gallium Nitride, Silicon Carbide, Zinc Oxide and diamond defects. The central part of the thesis delves into the fabrication of high aspect ratio, thin, nanoscale, conductive diamond membranes hosting SiV colour centres, which demonstrate key advantages, such as being easily transferrable to a variety of structures. \nSecondly, I investigate unknown narrowband SPEs in diamond nanocrystals, which are preferable for nanophotonic, quantum communications and bio-imaging applications. The origin of the narrowband emission is determined to be point defects localised at extended morphological defects in individual nanodiamond particles. Furthermore, a highly polarised, narrowband, possessing sub GHz optical linewidths was observed at cryogenic temperatures. \nFinally, I exploit the optimal fluorescent, chemical and biocompatibility properties for multi-colour tagging of CHO-K1 and U937 cell lines using both NV- and, for the first time, SiV diamond colour centres, to investigate their intracellular properties. The non-toxic SiV diamond nanocrystals initially dispersed throughout the cell interior while tagged NV nanocrystals localised close to the nucleus. \nTherefore, this work reports new findings in spectroscopic studies of diamond-based colour centres that can be excited optically and electrically. Furthermore, it provides detailed evidence which forms the building blocks for future investigation into diamond-based devices and SPEs for a wide variety of applications. The results presented in this thesis therefore provide a new and interesting platform for applications using defect based nanophotonics.
Color centers in wide bandgap semiconductors are prominent candidates for solid-state quantum technologies due to their attractive properties including optical interfacing, long coherence times, and spin–photon and spin–spin entanglement, as well as the potential for scalability. Silicon carbide color centers integrated into photonic devices span a wide range of applications in quantum information processing in a material platform with quantum-grade wafer availability and advanced processing capabilities. Recent progress in emitter generation and characterization, nanofabrication, device design, and quantum optical studies has amplified the scientific interest in this platform. We provide a conceptual and quantitative analysis of the role of silicon carbide integrated photonics in three key application areas: quantum networking, simulation, and computing.
Abstract Color centers in diamond, silicon carbide, and related materials have recently emerged as one of the most promising platforms for quantum technology applications. These optically active point defects in the crystal lattice demonstrate outstanding optical and spin properties at room and even higher temperatures, which can hardly be achieved using other quantum systems. For a long time, the host material was considered only as a mechanical carrier of color centers, and the fact that it is a semiconductor and, therefore, can contain high densities of electrons and holes, was ignored. However, recent studies have demonstrated that color centers can exchange electrons and holes with the valence or conduction bands of the host material, which enables novel functionalities, ranging from ultrabright electrically driven single‐photon sources to protected quantum memories. This review summarizes recent advances in understanding this interaction.
Very recently, the interest for quantum technologies by the scientific community and industry has strongly increased. Different types of implementations have been proposed as a practical implementation for a quantum bit. In particular, quantum photonics is a strong candidate for such applications. We are interested in using single photons and single spins in diamond as a solid state host matrix (nanodiamonds or membranes). Integration of nanosources of light is currently a major bottleneck preventing the realisation of all-photonic chips for quantum technologies and nanophotonics applications. Ideally, one needs optical circuitry, on-chip photodetection and on-chip generation of quantum states of light (single photons, entangled photons…). Our recent work on a new platform for quantum photonics using integrated optics can offer an easier and robust way to create compact quantum circuits that can be on chip and scalable. In this context, the coupling between waveguides and single photon emitters is critical. The goal of our research is to efficiently couple single photon emitters with a new platform made of optical glass waveguides. These waveguides are based on the so-called ion-exchange glass technology and is know in the photonics industry for quite some time but has never been used in the context of quantum technologies. Efficient light-matter interface is of primordial importance in this system. To achieve this goal, several paths are undertaken such as the use of dielectric and plasmonic structuration in order to increase the light interaction with the waveguide or to develop fabrication techniques to insert the emitters directly inside the guide (for nanodiamonds). We will show what is our current state of the art for placing single emitters at the right place on our optical waveguides made of ion-exchange in glass and in particular what can be done to improve our first promising results in order to get near unity coupling between the optical bus and single photon emitters. We will show first results with semiconductor nanocrystals (NCs) but also using nitrogen-vacancy and silicon-vacancy defects in nanodiamond. The very first step in of our approach consists in the design of the structured waveguide using electromagnetic FDTD. We demonstrated that it is possible to achieve more than 90% coupling. In practice, before using coloured centres in diamond, we started working with CdSe/ZnS semiconductor nanocrystals. So far, we use straight waveguides defined to be single modes at the nominal wavelength of the emission line of the nanoemitters. The positioning of nanoemitters is still a challenge to be achieved. We developed an original technique based on photopolymerisation of light where the nanocrystals are grafted into a light sensitive polymer and can be placed at adequate positions.
Solid-state atomic-sized color centers in wide-bandgap semiconductors, such as diamond, silicon carbide, and hexagonal boron nitride, are important platforms for quantum technologies, specifically for single-photon sources and quantum sensing. One of the emerging applications of these quantum emitters is subdiffraction imaging. This capability is provided by the specific photophysical properties of color centers, such as high dipole moments, photostability, and a variety of spectral ranges of the emitters with associated optical and microwave control of their quantum states. We review applications of color centers in traditional super-resolution microscopy and quantum imaging methods, and compare relative performance. The current state and perspectives of their applications in biomedical, chemistry, and material science imaging are outlined.
Quantum emitters serve as essential on-demand photonic resources, generating quantum states of light such as single photons and entangled photon pairs while serving as interfaces between light and matter. Buried in the solid state, quantum emitters enable a straightforward adoption of advanced nanofabrication techniques, facilitating precise engineering of their photonic environment for scalable quantum technologies. In this review, we introduce the fundamentals of quantum emitters and the key metrics characterising their performance. We highlight three material platforms: quantum dots, defect centres in diamond, and defect centres in silicon carbide. We summarise the recent developments of these platforms and discuss their advancements in quantum applications, including quantum communication, computation, and sensing. Finally, we provide a comparison across the three platforms, along with an outlook on future directions and potential challenges.