Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Operation With Terahertz Mixer Based on YBaCuO Josephson Junction: Analysis and Numerical Simulation

Ekaterina A. Matrozova, L. S. Revin

Published Jun 4, 2024• 3 citations
Publisher

Abstract

This paper presents theoretical analysis and modeling of YBaCuO superconducting Josephson mixer for terahertz frequency band. The study was carried out both for the mixing at the first harmonic and for the case of high harmonic mixing. The numerical solution based on resistively shunted junction model was obtained for the YBaCuO junction with typical experimental parameters. Optimizing mixer performance included choosing the proper operating point and the local oscillator power. A study on the effect of RF input power, frequency and the harmonic number on conversion efficiency was carried out. The theoretical predictions presented in the work provide a simple method for optimal control of the Josephson mixer and demonstrate good qualitative agreement with direct modeling. For the first time, the optimum of the conversion efficiency versus signal frequency was analytically obtained.

DOI
10.1109/tasc.2024.3409064

Related papers

Simulations and Analysis of a High Harmonic Monolithic YBCO HTS Josephson Mixer

Ekaterina A. Matrozova, L. S. Revin, Alexander V. Chiginev

This paper presents an electromagnetic simulation of YBaCuO superconducting Josephson mixer for terahertz frequency band coupled with a log-periodic antenna. The proposed mixer design includes an on-chip diplexer and bias-tee. This approach reduces signal transmission losses, improves circuit isolation and makes the device very compact. The theoretical approach to the description of high-harmonic mixing proposed by the authors allows us to estimate the mixer conversion efficiency for experimentally obtained parameters of Josephson junctions. Comparison of experimental data with the theory showed the applicability of the suggested approach for a qualitative description of the mixer operation and allowed to estimate the efficiency of the simulated monolithic mixer.

IEEE All-Russian Microwave Conference (RMC)•Nov 25, 2024•0 citations

A wideband terahertz high- T c superconducting Josephson-junction mixer: electromagnetic design, analysis and characterization

Xiang Gao, Ting Zhang, Jia Du +3 more

Abstract This paper presents a wideband terahertz (THz) mixer based on a thin-film antenna-coupled high-temperature superconducting (HTS) YBa 2 Cu 3 O 7−x (YBCO) step-edge Josephson junction. The HTS mixer enables the flexible harmonic mixing operation at multiple THz bands with the same microwave local oscillator (LO) source, and features very wide intermediate-frequency or instantaneous bandwidth. In order to optimize the frequency down-conversion performance of the mixer, systematic electromagnetic design and analysis have been carried out to improve the power coupling of THz radiation as well as wideband transmission of microwave signals. Experimental characterization of a fabricated device prototype has demonstrated that the mixer exhibits good performance at both the 200 GHz and 600 GHz bands. Detailed measurement results including the DC characteristics, LO pumping requirement, frequency response, mixing linearity and conversion gain are presented in this paper.

Superconductor Science and Technology•Jun 30, 2017•43 citations

Noise and Conversion Analyses for High-T c Superconducting Harmonic Mixers: Theoretical Modeling and Experimental Verification

Huanxin Li, Xiang Gao, Jianping An +2 more

High-Tcsuperconducting (HTS) harmonic mixers are attractive frontends for terahertz wireless communication and sensing applications. However, the investigation of HTS harmonic mixers has long been hindered by the lack of effective theoretical method in device modeling. This article presents a modeling approach for analyzing the noise and conversion properties of HTS harmonic mixers. By quantitively analyzing the contribution of the parasitic components to frequency conversion, a parasitics-selection based equivalent circuit model is built with the architecture complexity reduced to a six-port network. Besides, a fast hybrid-solution method that combines the single-tone current excitation and perturbation-derivation processing techniques, is developed for efficiently calculating the conversion impedance matrix for harmonic mixing. Detailed derivations are then carried out to acquire the semianalytic expressions of noise temperature and conversion gain after solving the noise correlation matrix for harmonic mixing. The presented modeling method has been verified by the fourth harmonic mixing experiments for a dual-band antenna-coupled HTS Josephson-junction mixer module. The measured and simulated results are in good agreement in terms of the noise temperature and conversion gain as well as their dependance on dc biasing, local oscillator pumping, and operating temperatures. The results have validated the effectiveness of the presented modeling method for analyzing the properties of HTS Josephson junction mixers.

IEEE Transactions on Terahertz Science and Technology•Feb 24, 2022•5 citations

High-Tc superconducting Josephson mixers for terahertz heterodyne detection

M. Malnou, C. Feuillet-Palma, C. Ulysse +6 more

We report on an experimental and theoretical study of the high-frequency mixing properties of ion-irradiated YBa2Cu3O7 Josephson junctions embedded in THz antennas. We investigated the influence of the local oscillator power and frequency on the device performances. The experimental data are compared with theoretical predictions of the general three-port model for mixers in which the junction is described by the resistively shunted junction model. A good agreement is obtained for the conversion efficiency in different frequency ranges, spanning above and below the characteristic frequencies fc of the junctions.

arXiv:1405.5998•Journal of Applied Physics•Aug 19, 2014•65 citations

Superconducting Microwave Mixers Utilizing Josephson Junctions

A. DiNardo, E. Sard

Microwave superconducting mixers operating at 10–13 GHz utilizing Josephson junctions have been investigated analytically and experimentally. Measurements on mixer sensitivity were carried out at 13 GHz using waveguide-mounted experimental point-contact Josephson junctions at 4.2 K. Results showed sensitivities of −90 dBm/MHz (10−18 W/Hz) which included mismatch losses encountered in the waveguide structure. The Josephson junction mixing mechanism was analyzed on the basis of small-signal modulation of the staircase like dc I-V characteristics. It was shown that a small-signal microwave excitation results in an ac lateral shift of the regions between steps, such that: (a) Optimum Josephson mixing occurs halfway between steps. (b) Mixing occurs between all steps with maximum conversion efficiency between the zero and first step. (c) Predicted low conversion loss and possibly internal gain for a matched mixer. The analytical model was simulated by a digital computer and the behavior of the Josephson mixer predicted for various conditions of excitation. The model chosen for the analysis and the computer simulation is based on the simplest assumptions concerning bulk-formed Josephson junctions. In the laboratory an external local oscillator set 60 MHz below the signal frequency was used to induce the well-known step structure in the dc I-V characteristic of the point-contact Josephson junction. Mixing of the Lo and signal was found to occur between constant voltage steps in agreement with both analysis and computer simulation. The correctness of the model is demonstrated by the agreement between the theory and experiment.

Journal of Applied Physics•Jan 1, 1971•7 citations

Design and modeling of a single-balanced high-Tc superconducting Josephson-junction terahertz mixer

Xiang Gao, Huanxin Li, Jia Du +5 more

High-Tc superconducting (HTS) receivers are promising candidates for terahertz (THz) communication applications due to their superior sensitivity and the cooling attainability with a miniature cryogenic system. Nevertheless, currently reported HTS mixers are mostly single-junction devices, and a more complicated architecture like the balanced configuration has not been investigated. This paper presents the design of a 600-GHz single-balanced HTS mixer, where detailed electromagnetic simulations are carried out to optimize the coupling efficiency and port isolation, as well as desired amplitude and phase relationship. To predict the noise and conversion performance, we present an innovative multiport network interleaving-based modeling method that enables powerful simulation verifications for single-balanced HTS Josephson mixers. Simulation results show that the presented device exhibits very good HTS mixer performance at the 600-GHz band, which validates the effectiveness of the design and the potential of the mixer for THz communication applications.

Journal of Applied Physics•Jan 20, 2022•8 citations
This paper presents theoretical analysis and modeling of YBaCuO superconducting Josephson mixer for terahertz frequency band. The study was carried out both for the mixing at the first harmonic and for the case of high harmonic mixing. The numerical solution based on resistively shunted junction model was obtained for the YBaCuO junction with typical experimental parameters. Optimizing mixer performance included choosing the proper operating point and the local oscillator power. A study on the effect of RF input power, frequency and the harmonic number on conversion efficiency was carried out. The theoretical predictions presented in the work provide a simple method for optimal control of the Josephson mixer and demonstrate good qualitative agreement with direct modeling. For the first time, the optimum of the conversion efficiency versus signal frequency was analytically obtained.
This paper presents an electromagnetic simulation of YBaCuO superconducting Josephson mixer for terahertz frequency band coupled with a log-periodic antenna. The proposed mixer design includes an on-chip diplexer and bias-tee. This approach reduces signal transmission losses, improves circuit isolation and makes the device very compact. The theoretical approach to the description of high-harmonic mixing proposed by the authors allows us to estimate the mixer conversion efficiency for experimentally obtained parameters of Josephson junctions. Comparison of experimental data with the theory showed the applicability of the suggested approach for a qualitative description of the mixer operation and allowed to estimate the efficiency of the simulated monolithic mixer.
Abstract This paper presents a wideband terahertz (THz) mixer based on a thin-film antenna-coupled high-temperature superconducting (HTS) YBa 2 Cu 3 O 7−x (YBCO) step-edge Josephson junction. The HTS mixer enables the flexible harmonic mixing operation at multiple THz bands with the same microwave local oscillator (LO) source, and features very wide intermediate-frequency or instantaneous bandwidth. In order to optimize the frequency down-conversion performance of the mixer, systematic electromagnetic design and analysis have been carried out to improve the power coupling of THz radiation as well as wideband transmission of microwave signals. Experimental characterization of a fabricated device prototype has demonstrated that the mixer exhibits good performance at both the 200 GHz and 600 GHz bands. Detailed measurement results including the DC characteristics, LO pumping requirement, frequency response, mixing linearity and conversion gain are presented in this paper.
High-Tcsuperconducting (HTS) harmonic mixers are attractive frontends for terahertz wireless communication and sensing applications. However, the investigation of HTS harmonic mixers has long been hindered by the lack of effective theoretical method in device modeling. This article presents a modeling approach for analyzing the noise and conversion properties of HTS harmonic mixers. By quantitively analyzing the contribution of the parasitic components to frequency conversion, a parasitics-selection based equivalent circuit model is built with the architecture complexity reduced to a six-port network. Besides, a fast hybrid-solution method that combines the single-tone current excitation and perturbation-derivation processing techniques, is developed for efficiently calculating the conversion impedance matrix for harmonic mixing. Detailed derivations are then carried out to acquire the semianalytic expressions of noise temperature and conversion gain after solving the noise correlation matrix for harmonic mixing. The presented modeling method has been verified by the fourth harmonic mixing experiments for a dual-band antenna-coupled HTS Josephson-junction mixer module. The measured and simulated results are in good agreement in terms of the noise temperature and conversion gain as well as their dependance on dc biasing, local oscillator pumping, and operating temperatures. The results have validated the effectiveness of the presented modeling method for analyzing the properties of HTS Josephson junction mixers.
We report on an experimental and theoretical study of the high-frequency mixing properties of ion-irradiated YBa2Cu3O7 Josephson junctions embedded in THz antennas. We investigated the influence of the local oscillator power and frequency on the device performances. The experimental data are compared with theoretical predictions of the general three-port model for mixers in which the junction is described by the resistively shunted junction model. A good agreement is obtained for the conversion efficiency in different frequency ranges, spanning above and below the characteristic frequencies fc of the junctions.
Microwave superconducting mixers operating at 10–13 GHz utilizing Josephson junctions have been investigated analytically and experimentally. Measurements on mixer sensitivity were carried out at 13 GHz using waveguide-mounted experimental point-contact Josephson junctions at 4.2 K. Results showed sensitivities of −90 dBm/MHz (10−18 W/Hz) which included mismatch losses encountered in the waveguide structure. The Josephson junction mixing mechanism was analyzed on the basis of small-signal modulation of the staircase like dc I-V characteristics. It was shown that a small-signal microwave excitation results in an ac lateral shift of the regions between steps, such that: (a) Optimum Josephson mixing occurs halfway between steps. (b) Mixing occurs between all steps with maximum conversion efficiency between the zero and first step. (c) Predicted low conversion loss and possibly internal gain for a matched mixer. The analytical model was simulated by a digital computer and the behavior of the Josephson mixer predicted for various conditions of excitation. The model chosen for the analysis and the computer simulation is based on the simplest assumptions concerning bulk-formed Josephson junctions. In the laboratory an external local oscillator set 60 MHz below the signal frequency was used to induce the well-known step structure in the dc I-V characteristic of the point-contact Josephson junction. Mixing of the Lo and signal was found to occur between constant voltage steps in agreement with both analysis and computer simulation. The correctness of the model is demonstrated by the agreement between the theory and experiment.
High-Tc superconducting (HTS) receivers are promising candidates for terahertz (THz) communication applications due to their superior sensitivity and the cooling attainability with a miniature cryogenic system. Nevertheless, currently reported HTS mixers are mostly single-junction devices, and a more complicated architecture like the balanced configuration has not been investigated. This paper presents the design of a 600-GHz single-balanced HTS mixer, where detailed electromagnetic simulations are carried out to optimize the coupling efficiency and port isolation, as well as desired amplitude and phase relationship. To predict the noise and conversion performance, we present an innovative multiport network interleaving-based modeling method that enables powerful simulation verifications for single-balanced HTS Josephson mixers. Simulation results show that the presented device exhibits very good HTS mixer performance at the 600-GHz band, which validates the effectiveness of the design and the potential of the mixer for THz communication applications.