Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optica Quantum

Low-noise short-wavelength pumped frequency downconversion for quantum frequency converters

Jan Fabian Geus, Florian Elsen, Sebastian Nyga, Arian Stolk, Kian L. van der Enden, E.J. van Zwet, C. Haefner, Ronald Hanson, Bernd Jungbluth

Published May 13, 2024• 17 citations
Publisher

Abstract

We present a highly efficient low-noise quantum frequency converter from the visible range to telecom wavelengths, combining a pump laser at intermediate frequency resonantly enhanced in an actively stabilized cavity with a monocrystalline bulk crystal. A demonstrator for photons emitted by nitrogen-vacancy-center qubits achieves 43% external efficiency with a noise photon rate per wavelength (frequency) band of 2 s −1 /pm(17 s −1 /GHz) – reducing the noise by two orders of magnitude compared with current devices based on periodically poled crystals with waveguides. With its tunable output wavelength, this device enables the generation of indistinguishable telecom photons from different network nodes and is, as such, a crucial component for a future quantum internet based on optical fiber.

DOI
10.1364/opticaq.515769

Related papers

Low-noise quantum frequency conversion in a monolithic cavity with bulk periodically poled potassium titanyl phosphate

Felix Mann, Helen M. Chrzanowski, Felipe Lucas Gewers +2 more

Interfacing the different building blocks of a future large-scale quantum network will require efficient and noiseless frequency conversion of quantum light. Nitrogen-vacancy centers in diamond are a leading candidate to form the nodes of such a network. However, the performance of a suitable converter remains a bottleneck, with existing demonstrations severely limited by parasitic noise arising at the target telecommunication wavelength. Here we demonstrate a platform for efficient low-noise quantum frequency conversion based on a monolithic bulk periodically poled potassium titanyl phosphate cavity and show its suitability for the conversion of 637-nm single photons from nitrogen-vacancy centers in diamond to telecommunication wavelengths. By resonantly enhancing the power of an off-the-shelf pump laser, we achieve an internal conversion efficiency of $(72.3\ifmmode\pm\else\textpm\fi{}0.4)\mathrm{%}$ while generating noise of only $(110\ifmmode\pm\else\textpm\fi{}4)\phantom{\rule{0.2em}{0ex}}\mathrm{kHz}/\mathrm{nm}$ at the target wavelength without the need for any active stabilization. This constitutes a fivefold reduction in noise over existing state-of-the-art single-step converters at these wavelengths. We verify the almost-ideal preservation of nonclassical correlations by converting photons from a spontaneous-parametric-down-conversion source and moreover show the preservation of time-energy entanglement via Franson interferometry.

arXiv:2304.13459•Physical Review Applied•Nov 3, 2023•30 citations

Two-stage, low noise quantum frequency conversion of single photons from silicon-vacancy centers in diamond to the telecom C-band

Marlon Schäfer, Benjamin Kambs, Dennis Herrmann +2 more

The silicon-vacancy center in diamond holds great promise as a qubit for quantum communication networks. However, since the optical transitions are located within the visible red spectral region, quantum frequency conversion to low-loss telecommunication wavelengths becomes a necessity for its use in long-range, fiber-linked networks. This work presents a highly efficient, low-noise quantum frequency conversion device for photons emitted by a silicon-vacancy (SiV) center in diamond to the telecom C-band. By using a two-stage difference-frequency mixing scheme SPDC noise is circumvented and Raman noise is minimized, resulting in a very low noise rate of $10.4 \pm 0.7$ photons per second as well as an overall device efficiency of $35.6\, \%$. By converting single photons from SiV centers we demonstrate the preservation of photon statistics upon conversion.

arXiv:2307.11389•Jul 21, 2023•0 citations

Frequency down-conversion for efficient, low-noise quantum frequency converters

Jan Fabian Geus, Florian Elsen, Sebastian Nyga +3 more

We present a novel device for the efficient, low-noise down-conversion of low-power light from the red visible spectrum. It can be applied to interface electronic spin-qubits in nitrogen-vacancy centers in diamond to the telecommunication wavelengths and thus offers the possibility to implement large-scale quantum networks in existing fiber infrastructure. In comparison to state-of-the-art frequency converters for this application, the device presented here generates an overall noise rate, which is one order of magnitude better than current record values. Simultaneously, an internal conversion efficiency of 50 % was measured. Furthermore, the converter serves as a feasibility demonstration of a general concept for the down-conversion of light from the sub-micron spectral range to telecommunication wavelengths.

Quantum Computing, Communication, and Simulation•Mar 2, 2022•1 citation

Low-noise quantum frequency down-conversion of indistinguishable photons (Conference Presentation)

Benjamin Kambs, Jan Kettler, Matthias Bock +5 more

Single-photon sources based on quantum dots have been shown to exhibit almost ideal properties such as high brightness and purity in terms of clear anti-bunching as well as high two-photon interference visibilities of the emitted photons, making them promising candidates for different quantum information applications such as quantum computing, quantum communication and quantum teleportation. However, as most single-photon sources also quantum dots typically emit light at wavelengths of electronic transitions within the visible or the near infrared range. In order to establish quantum networks with remote building blocks, low-loss single photons at telecom wavelengths are preferable, though. Despite recent progress on emitters of telecom-photons, the most efficient single-photon sources still work at shorter wavelengths. On that matter, quantum frequency down-conversion, being a nonlinear optical process, has been used in recent years to alter the wavelength of single photons to the telecom wavelength range while conserving their nonclassical properties. Characteristics such as lifetime, first-order coherence, anti-bunching and entanglement have been shown to be conserved or even improved due to background suppression during the conversion process, while the conservation of indistinguishability was yet to be shown. Here we present our experimental results on quantum frequency down-conversion of single photons emitted by an InAs/GaAs quantum dot at 903.6 nm following a pulsed excitation of a p-shell exciton at 884 nm. The emitted fluorescence photons are mixed with a strong pump-field at 2155 nm inside a periodically poled lithium niobate ridge waveguide and converted to 1557 nm. Common issues of a large background due to Raman-scattered pump-light photons spectrally overlapping with the converted single photons could largely be avoided, as the pump-wavelength was chosen to be fairly longer than the target wavelength. Additional narrowband spectral filtering at the telecom regime as a result of the small conversion bandwidth and using a high-performance fiber-Bragg-grating solely left the detector dark counts as the only noise source in our setup. Therefore, we could achieve conversion efficiencies of more than 20 %. In order to test the indistinguishability, sequentially emitted photons were fed into a Mach-Zehnder interferometer and spatially as well as temporally overlapped at the output beam splitter. Cross-correlation measurements between both output-ports of the beam splitter exhibit two-photon interference contrasts of more than 40 % prior to and after the down-conversion step. Accordingly, we demonstrate that the process of quantum frequency conversion preserves photon indistinguishability and can be used to establish a versatile source of indistinguishable single photons at the telecom C-Band. Furthermore our scheme allows for converting photons in a wavelength band from 900 nm to 910 nm to the same telecom target wavelength. This enables us to test indistinguishability of frequency-converted photons, originally stemming from different sources with dinstinguishable wavelengths.

•Aug 3, 2016•0 citations

Fiber-integrated Quantum Frequency Conversion for Long-distance Quantum Networking

Zhichuan Liao, Ao Shen, Lai Zhou +2 more

Signal photons emitted by quantum nodes typically fall outside the low-loss telecom window of optical fibers, leading to severe transmission losses. Quantum frequency conversion (QFC) offers an effective optical interface that bridges quantum nodes with telecom-band channels, enabling long-distance quantum communication. In this work, we demonstrate a compact, fiber-integrated QFC system with low noise and a high signal-to-noise ratio (SNR). Using a periodically poled lithium niobate (PPLN) waveguide, input photons at 637.2 nm are down-converted to telecom photons at 1588.3 nm. Our system achieves a total conversion efficiency of approximately 9%, with pump-induced noise suppressed to 154 Hz. For input photon rates of 32.7, 118.0, and 327.7 kHz, the corresponding SNRs are 12.3, 43.9, and 117.8, respectively. We further develop a theoretical model to simulate the entanglement fidelity between nitrogen-vacancy (NV) center spins and the frequency-converted telecom photons. At the emission rate of an NV center, our QFC system maintains an expected fidelity exceeding 52% over a transmission distance of 100 km. These findings highlight the potential of our QFC system for scalable, long-distance quantum networking.

quant-pharXiv:2604.23444•npj Quantum Information•Apr 28, 2026•0 citations

Quantum frequency conversion of single photons from a tin-vacancy center in diamond

Julia M. Brevoord, Jan Fabian Geus, Tim Turan +7 more

Diamond tin-vacancy (SnV) centers are promising candidates for building quantum network nodes. However, their native photon emission at 619 nm is incompatible with metropolitan-scale networks operating at low-loss telecom wavelengths. To address this, we demonstrate highly efficient, low-noise quantum frequency conversion (QFC) of 619 nm photons to the telecom S-band at 1480 nm. The conversion process combines 619 nm photons with 1064 nm pump light in an actively stabilized cavity containing a bulk monocrystalline potassium titanyl arsenate (KTA) crystal. We achieve an internal (external) conversion efficiency of (48 ± 3) % ((28 ± 2) %) and a noise photon rate per wavelength of (2.2 ± 0.9) cts/s/pm, which is spectrally flat in the investigated frequency range of 40 GHz. Furthermore, we demonstrate that the efficiency remains above 80% of its maximum over a frequency range of 70 GHz. Finally, we generate a string of photons from a single waveguide-embedded SnV − center using a train of excitation pulses and send these through the QFC. After the QFC, we observe telecom light displaying the SnV lifetime, confirming successful conversion. These results represent a critical step towards metropolitan-scale fiber-based quantum networks using SnV − centers.

arXiv:2509.01661•Optica Quantum•Dec 10, 2025•6 citations
We present a highly efficient low-noise quantum frequency converter from the visible range to telecom wavelengths, combining a pump laser at intermediate frequency resonantly enhanced in an actively stabilized cavity with a monocrystalline bulk crystal. A demonstrator for photons emitted by nitrogen-vacancy-center qubits achieves 43% external efficiency with a noise photon rate per wavelength (frequency) band of 2 s −1 /pm(17 s −1 /GHz) – reducing the noise by two orders of magnitude compared with current devices based on periodically poled crystals with waveguides. With its tunable output wavelength, this device enables the generation of indistinguishable telecom photons from different network nodes and is, as such, a crucial component for a future quantum internet based on optical fiber.
Interfacing the different building blocks of a future large-scale quantum network will require efficient and noiseless frequency conversion of quantum light. Nitrogen-vacancy centers in diamond are a leading candidate to form the nodes of such a network. However, the performance of a suitable converter remains a bottleneck, with existing demonstrations severely limited by parasitic noise arising at the target telecommunication wavelength. Here we demonstrate a platform for efficient low-noise quantum frequency conversion based on a monolithic bulk periodically poled potassium titanyl phosphate cavity and show its suitability for the conversion of 637-nm single photons from nitrogen-vacancy centers in diamond to telecommunication wavelengths. By resonantly enhancing the power of an off-the-shelf pump laser, we achieve an internal conversion efficiency of $(72.3\ifmmode\pm\else\textpm\fi{}0.4)\mathrm{%}$ while generating noise of only $(110\ifmmode\pm\else\textpm\fi{}4)\phantom{\rule{0.2em}{0ex}}\mathrm{kHz}/\mathrm{nm}$ at the target wavelength without the need for any active stabilization. This constitutes a fivefold reduction in noise over existing state-of-the-art single-step converters at these wavelengths. We verify the almost-ideal preservation of nonclassical correlations by converting photons from a spontaneous-parametric-down-conversion source and moreover show the preservation of time-energy entanglement via Franson interferometry.
The silicon-vacancy center in diamond holds great promise as a qubit for quantum communication networks. However, since the optical transitions are located within the visible red spectral region, quantum frequency conversion to low-loss telecommunication wavelengths becomes a necessity for its use in long-range, fiber-linked networks. This work presents a highly efficient, low-noise quantum frequency conversion device for photons emitted by a silicon-vacancy (SiV) center in diamond to the telecom C-band. By using a two-stage difference-frequency mixing scheme SPDC noise is circumvented and Raman noise is minimized, resulting in a very low noise rate of 10.4±0.710.4 \pm 0.710.4±0.7 photons per second as well as an overall device efficiency of 35.6 %35.6\, \%35.6%. By converting single photons from SiV centers we demonstrate the preservation of photon statistics upon conversion.
We present a novel device for the efficient, low-noise down-conversion of low-power light from the red visible spectrum. It can be applied to interface electronic spin-qubits in nitrogen-vacancy centers in diamond to the telecommunication wavelengths and thus offers the possibility to implement large-scale quantum networks in existing fiber infrastructure. In comparison to state-of-the-art frequency converters for this application, the device presented here generates an overall noise rate, which is one order of magnitude better than current record values. Simultaneously, an internal conversion efficiency of 50 % was measured. Furthermore, the converter serves as a feasibility demonstration of a general concept for the down-conversion of light from the sub-micron spectral range to telecommunication wavelengths.
Single-photon sources based on quantum dots have been shown to exhibit almost ideal properties such as high brightness and purity in terms of clear anti-bunching as well as high two-photon interference visibilities of the emitted photons, making them promising candidates for different quantum information applications such as quantum computing, quantum communication and quantum teleportation. However, as most single-photon sources also quantum dots typically emit light at wavelengths of electronic transitions within the visible or the near infrared range. In order to establish quantum networks with remote building blocks, low-loss single photons at telecom wavelengths are preferable, though. Despite recent progress on emitters of telecom-photons, the most efficient single-photon sources still work at shorter wavelengths. On that matter, quantum frequency down-conversion, being a nonlinear optical process, has been used in recent years to alter the wavelength of single photons to the telecom wavelength range while conserving their nonclassical properties. Characteristics such as lifetime, first-order coherence, anti-bunching and entanglement have been shown to be conserved or even improved due to background suppression during the conversion process, while the conservation of indistinguishability was yet to be shown. Here we present our experimental results on quantum frequency down-conversion of single photons emitted by an InAs/GaAs quantum dot at 903.6 nm following a pulsed excitation of a p-shell exciton at 884 nm. The emitted fluorescence photons are mixed with a strong pump-field at 2155 nm inside a periodically poled lithium niobate ridge waveguide and converted to 1557 nm. Common issues of a large background due to Raman-scattered pump-light photons spectrally overlapping with the converted single photons could largely be avoided, as the pump-wavelength was chosen to be fairly longer than the target wavelength. Additional narrowband spectral filtering at the telecom regime as a result of the small conversion bandwidth and using a high-performance fiber-Bragg-grating solely left the detector dark counts as the only noise source in our setup. Therefore, we could achieve conversion efficiencies of more than 20 %. In order to test the indistinguishability, sequentially emitted photons were fed into a Mach-Zehnder interferometer and spatially as well as temporally overlapped at the output beam splitter. Cross-correlation measurements between both output-ports of the beam splitter exhibit two-photon interference contrasts of more than 40 % prior to and after the down-conversion step. Accordingly, we demonstrate that the process of quantum frequency conversion preserves photon indistinguishability and can be used to establish a versatile source of indistinguishable single photons at the telecom C-Band. Furthermore our scheme allows for converting photons in a wavelength band from 900 nm to 910 nm to the same telecom target wavelength. This enables us to test indistinguishability of frequency-converted photons, originally stemming from different sources with dinstinguishable wavelengths.
Signal photons emitted by quantum nodes typically fall outside the low-loss telecom window of optical fibers, leading to severe transmission losses. Quantum frequency conversion (QFC) offers an effective optical interface that bridges quantum nodes with telecom-band channels, enabling long-distance quantum communication. In this work, we demonstrate a compact, fiber-integrated QFC system with low noise and a high signal-to-noise ratio (SNR). Using a periodically poled lithium niobate (PPLN) waveguide, input photons at 637.2 nm are down-converted to telecom photons at 1588.3 nm. Our system achieves a total conversion efficiency of approximately 9%, with pump-induced noise suppressed to 154 Hz. For input photon rates of 32.7, 118.0, and 327.7 kHz, the corresponding SNRs are 12.3, 43.9, and 117.8, respectively. We further develop a theoretical model to simulate the entanglement fidelity between nitrogen-vacancy (NV) center spins and the frequency-converted telecom photons. At the emission rate of an NV center, our QFC system maintains an expected fidelity exceeding 52% over a transmission distance of 100 km. These findings highlight the potential of our QFC system for scalable, long-distance quantum networking.
Diamond tin-vacancy (SnV) centers are promising candidates for building quantum network nodes. However, their native photon emission at 619 nm is incompatible with metropolitan-scale networks operating at low-loss telecom wavelengths. To address this, we demonstrate highly efficient, low-noise quantum frequency conversion (QFC) of 619 nm photons to the telecom S-band at 1480 nm. The conversion process combines 619 nm photons with 1064 nm pump light in an actively stabilized cavity containing a bulk monocrystalline potassium titanyl arsenate (KTA) crystal. We achieve an internal (external) conversion efficiency of (48 ± 3) % ((28 ± 2) %) and a noise photon rate per wavelength of (2.2 ± 0.9) cts/s/pm, which is spectrally flat in the investigated frequency range of 40 GHz. Furthermore, we demonstrate that the efficiency remains above 80% of its maximum over a frequency range of 70 GHz. Finally, we generate a string of photons from a single waveguide-embedded SnV − center using a train of excitation pulses and send these through the QFC. After the QFC, we observe telecom light displaying the SnV lifetime, confirming successful conversion. These results represent a critical step towards metropolitan-scale fiber-based quantum networks using SnV − centers.