Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2304.13459 · Physical Review Applied

Low-noise quantum frequency conversion in a monolithic cavity with bulk periodically poled potassium titanyl phosphate

Felix Mann, Helen M. Chrzanowski, Felipe Lucas Gewers, Marlon Placke, Sven Ramelow

Published Nov 3, 2023• 30 citations
arXivHTMLPDF

Abstract

Interfacing the different building blocks of a future large-scale quantum network will require efficient and noiseless frequency conversion of quantum light. Nitrogen-vacancy centers in diamond are a leading candidate to form the nodes of such a network. However, the performance of a suitable converter remains a bottleneck, with existing demonstrations severely limited by parasitic noise arising at the target telecommunication wavelength. Here we demonstrate a platform for efficient low-noise quantum frequency conversion based on a monolithic bulk periodically poled potassium titanyl phosphate cavity and show its suitability for the conversion of 637-nm single photons from nitrogen-vacancy centers in diamond to telecommunication wavelengths. By resonantly enhancing the power of an off-the-shelf pump laser, we achieve an internal conversion efficiency of $(72.3\ifmmode\pm\else\textpm\fi{}0.4)\mathrm{%}$ while generating noise of only $(110\ifmmode\pm\else\textpm\fi{}4)\phantom{\rule{0.2em}{0ex}}\mathrm{kHz}/\mathrm{nm}$ at the target wavelength without the need for any active stabilization. This constitutes a fivefold reduction in noise over existing state-of-the-art single-step converters at these wavelengths. We verify the almost-ideal preservation of nonclassical correlations by converting photons from a spontaneous-parametric-down-conversion source and moreover show the preservation of time-energy entanglement via Franson interferometry.

DOI
10.1103/physrevapplied.20.054010

Related papers

Quantum frequency conversion of single photons from a tin-vacancy center in diamond

Julia M. Brevoord, Jan Fabian Geus, Tim Turan +7 more

Diamond tin-vacancy (SnV) centers are promising candidates for building quantum network nodes. However, their native photon emission at 619 nm is incompatible with metropolitan-scale networks operating at low-loss telecom wavelengths. To address this, we demonstrate highly efficient, low-noise quantum frequency conversion (QFC) of 619 nm photons to the telecom S-band at 1480 nm. The conversion process combines 619 nm photons with 1064 nm pump light in an actively stabilized cavity containing a bulk monocrystalline potassium titanyl arsenate (KTA) crystal. We achieve an internal (external) conversion efficiency of (48 ± 3) % ((28 ± 2) %) and a noise photon rate per wavelength of (2.2 ± 0.9) cts/s/pm, which is spectrally flat in the investigated frequency range of 40 GHz. Furthermore, we demonstrate that the efficiency remains above 80% of its maximum over a frequency range of 70 GHz. Finally, we generate a string of photons from a single waveguide-embedded SnV − center using a train of excitation pulses and send these through the QFC. After the QFC, we observe telecom light displaying the SnV lifetime, confirming successful conversion. These results represent a critical step towards metropolitan-scale fiber-based quantum networks using SnV − centers.

arXiv:2509.01661•Optica Quantum•Dec 10, 2025•6 citations

A monolithic bulk ppKTP cavity for quantum frequency conversion from 637 nm to telecom wavelength

Felix Mann, Felipe Lucas Gewers, Helen M. Chrzanowski +1 more

We demonstrate an efficient low-noise quantum f requency c onverter based on a thermally self-stabilizing monolithic bulk ppKTP cavity for the conversion of single photons from nitrogen-vacancy centers in diamond to telecommunication wavelength.

Conference on Lasers and Electro-Optics•Jan 1, 2023•0 citations

Low-noise short-wavelength pumped frequency downconversion for quantum frequency converters

Jan Fabian Geus, Florian Elsen, Sebastian Nyga +6 more

We present a highly efficient low-noise quantum frequency converter from the visible range to telecom wavelengths, combining a pump laser at intermediate frequency resonantly enhanced in an actively stabilized cavity with a monocrystalline bulk crystal. A demonstrator for photons emitted by nitrogen-vacancy-center qubits achieves 43% external efficiency with a noise photon rate per wavelength (frequency) band of 2 s −1 /pm(17 s −1 /GHz) – reducing the noise by two orders of magnitude compared with current devices based on periodically poled crystals with waveguides. With its tunable output wavelength, this device enables the generation of indistinguishable telecom photons from different network nodes and is, as such, a crucial component for a future quantum internet based on optical fiber.

Optica Quantum•May 13, 2024•17 citations

Frequency down-conversion for efficient, low-noise quantum frequency converters

Jan Fabian Geus, Florian Elsen, Sebastian Nyga +3 more

We present a novel device for the efficient, low-noise down-conversion of low-power light from the red visible spectrum. It can be applied to interface electronic spin-qubits in nitrogen-vacancy centers in diamond to the telecommunication wavelengths and thus offers the possibility to implement large-scale quantum networks in existing fiber infrastructure. In comparison to state-of-the-art frequency converters for this application, the device presented here generates an overall noise rate, which is one order of magnitude better than current record values. Simultaneously, an internal conversion efficiency of 50 % was measured. Furthermore, the converter serves as a feasibility demonstration of a general concept for the down-conversion of light from the sub-micron spectral range to telecommunication wavelengths.

Quantum Computing, Communication, and Simulation•Mar 2, 2022•1 citation

Noise analysis of a quasi-phase-matched quantum frequency converter and higher-order counter-propagating SPDC

Felix Mann, Helen M. Chrzanowski, Felipe Lucas Gewers +2 more

Quantum frequency conversion (QFC) will be an indispensable ingredient in future quantum technologies. For example, large-scale fibre-based quantum networks will require QFC to interconnect heterogeneous building blocks like emitters, channels, memories, and detectors. The performance of existing QFC devices – typically realized in periodically poled nonlinear crystals – is often severely limited by parasitic noise that arises when the pump wavelength lies between the inter-converted wavelengths. Here we comprehensively investigate the noise spectrum of a QFC device pumped by a CW 1064 nm laser. The converter was realized as a bulk periodically poled potassium titanyl phosphate (ppKTP) crystal quasi-phase-matched for conversion between 637 nm and 1587 nm, which was also polished and coated to resonantly enhance the pump field by a factor of 50. While Raman scattering dominates the noise background from 1140 nm to 1330 nm, at larger energy shifts (beyond 60 THz), parasitic spontaneous parametric down-conversion (SPDC) is the strongest noise source. Further, the noise spectrum was contaminated by a regular succession of narrow-band peaks, which we attribute to a heretofore unidentified higher-order counter-propagating SPDC processes – with quasi-phase-matching orders up to 44 evident in our measurements. This work provides a comprehensive overview of the limiting noise sources in QFC devices that use quasi-phase-matched crystals and will prove an invaluable resource in guiding their future development.

arXiv:2407.03845•Optics Express•Oct 15, 2024•6 citations

Frequency down-conversion of 637 nm light to the telecommunication band for non-classical light emitted from NV centers in diamond

Rikizo Ikuta, Toshiki Kobayashi, Shuto Yasui +9 more

We demonstrate a low-noise frequency down-conversion of photons at 637 nm to the telecommunication band at 1587 nm by the difference frequency generation in a periodically-poled lithium niobate. An internal conversion efficiency of the converter is estimated to be 0.44 at the maximum which is achieved by a pump power of 0.43 W, whereas a rate of internal background photons caused by the strong cw pump laser is estimated to be 9 kHz/mW within a bandwidth of about 1 nm. By using the experimental values related to the intrinsic property of the converter, and using the intensity correlation and the average photon number of a 637 nm input light pulse, we derive the intensity correlation of a converted telecom light pulse. Then we discuss feasibility of a single-photon frequency conversion to the telecommunication band for a long-distance quantum communication based on NV centers in diamond.

arXiv:1402.2944•Optics Express•May 1, 2014•38 citations
Interfacing the different building blocks of a future large-scale quantum network will require efficient and noiseless frequency conversion of quantum light. Nitrogen-vacancy centers in diamond are a leading candidate to form the nodes of such a network. However, the performance of a suitable converter remains a bottleneck, with existing demonstrations severely limited by parasitic noise arising at the target telecommunication wavelength. Here we demonstrate a platform for efficient low-noise quantum frequency conversion based on a monolithic bulk periodically poled potassium titanyl phosphate cavity and show its suitability for the conversion of 637-nm single photons from nitrogen-vacancy centers in diamond to telecommunication wavelengths. By resonantly enhancing the power of an off-the-shelf pump laser, we achieve an internal conversion efficiency of (72.3\ifmmode\pm\else\textpm\fi{}0.4)\mathrm{%} while generating noise of only (110\ifmmode±\else\textpm\fi4)kHz/nm(110\ifmmode\pm\else\textpm\fi{}4)\phantom{\rule{0.2em}{0ex}}\mathrm{kHz}/\mathrm{nm}(110\ifmmode±\else\textpm\fi4)kHz/nm at the target wavelength without the need for any active stabilization. This constitutes a fivefold reduction in noise over existing state-of-the-art single-step converters at these wavelengths. We verify the almost-ideal preservation of nonclassical correlations by converting photons from a spontaneous-parametric-down-conversion source and moreover show the preservation of time-energy entanglement via Franson interferometry.
Diamond tin-vacancy (SnV) centers are promising candidates for building quantum network nodes. However, their native photon emission at 619 nm is incompatible with metropolitan-scale networks operating at low-loss telecom wavelengths. To address this, we demonstrate highly efficient, low-noise quantum frequency conversion (QFC) of 619 nm photons to the telecom S-band at 1480 nm. The conversion process combines 619 nm photons with 1064 nm pump light in an actively stabilized cavity containing a bulk monocrystalline potassium titanyl arsenate (KTA) crystal. We achieve an internal (external) conversion efficiency of (48 ± 3) % ((28 ± 2) %) and a noise photon rate per wavelength of (2.2 ± 0.9) cts/s/pm, which is spectrally flat in the investigated frequency range of 40 GHz. Furthermore, we demonstrate that the efficiency remains above 80% of its maximum over a frequency range of 70 GHz. Finally, we generate a string of photons from a single waveguide-embedded SnV − center using a train of excitation pulses and send these through the QFC. After the QFC, we observe telecom light displaying the SnV lifetime, confirming successful conversion. These results represent a critical step towards metropolitan-scale fiber-based quantum networks using SnV − centers.
We present a highly efficient low-noise quantum frequency converter from the visible range to telecom wavelengths, combining a pump laser at intermediate frequency resonantly enhanced in an actively stabilized cavity with a monocrystalline bulk crystal. A demonstrator for photons emitted by nitrogen-vacancy-center qubits achieves 43% external efficiency with a noise photon rate per wavelength (frequency) band of 2 s −1 /pm(17 s −1 /GHz) – reducing the noise by two orders of magnitude compared with current devices based on periodically poled crystals with waveguides. With its tunable output wavelength, this device enables the generation of indistinguishable telecom photons from different network nodes and is, as such, a crucial component for a future quantum internet based on optical fiber.
We present a novel device for the efficient, low-noise down-conversion of low-power light from the red visible spectrum. It can be applied to interface electronic spin-qubits in nitrogen-vacancy centers in diamond to the telecommunication wavelengths and thus offers the possibility to implement large-scale quantum networks in existing fiber infrastructure. In comparison to state-of-the-art frequency converters for this application, the device presented here generates an overall noise rate, which is one order of magnitude better than current record values. Simultaneously, an internal conversion efficiency of 50 % was measured. Furthermore, the converter serves as a feasibility demonstration of a general concept for the down-conversion of light from the sub-micron spectral range to telecommunication wavelengths.
Quantum frequency conversion (QFC) will be an indispensable ingredient in future quantum technologies. For example, large-scale fibre-based quantum networks will require QFC to interconnect heterogeneous building blocks like emitters, channels, memories, and detectors. The performance of existing QFC devices – typically realized in periodically poled nonlinear crystals – is often severely limited by parasitic noise that arises when the pump wavelength lies between the inter-converted wavelengths. Here we comprehensively investigate the noise spectrum of a QFC device pumped by a CW 1064 nm laser. The converter was realized as a bulk periodically poled potassium titanyl phosphate (ppKTP) crystal quasi-phase-matched for conversion between 637 nm and 1587 nm, which was also polished and coated to resonantly enhance the pump field by a factor of 50. While Raman scattering dominates the noise background from 1140 nm to 1330 nm, at larger energy shifts (beyond 60 THz), parasitic spontaneous parametric down-conversion (SPDC) is the strongest noise source. Further, the noise spectrum was contaminated by a regular succession of narrow-band peaks, which we attribute to a heretofore unidentified higher-order counter-propagating SPDC processes – with quasi-phase-matching orders up to 44 evident in our measurements. This work provides a comprehensive overview of the limiting noise sources in QFC devices that use quasi-phase-matched crystals and will prove an invaluable resource in guiding their future development.
We demonstrate a low-noise frequency down-conversion of photons at 637 nm to the telecommunication band at 1587 nm by the difference frequency generation in a periodically-poled lithium niobate. An internal conversion efficiency of the converter is estimated to be 0.44 at the maximum which is achieved by a pump power of 0.43 W, whereas a rate of internal background photons caused by the strong cw pump laser is estimated to be 9 kHz/mW within a bandwidth of about 1 nm. By using the experimental values related to the intrinsic property of the converter, and using the intensity correlation and the average photon number of a 637 nm input light pulse, we derive the intensity correlation of a converted telecom light pulse. Then we discuss feasibility of a single-photon frequency conversion to the telecommunication band for a long-distance quantum communication based on NV centers in diamond.