Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Japanese Journal of Applied Physics

Level assessment of 87Rb in rubidium-filled MEMS vapor cells by X-ray imaging for atomic magnetometers

Minwei Jiang, Jian Wang, Hao Zhai, Chen Chen, Qi Zhang, Dongmin Wu, Baoshun Zhang, Zhongming Zeng, Jie Lin, Yiqun Wang, Chunyu Jiang, Peng Jin

Published Apr 25, 2024• 3 citations
Publisher

Abstract

Abstract Quantitative assessments of the level and lifetime of alkali metal in the atomic vapor cells are essential for improving the stability of atomic magnetometers. In this paper, a fast and non-destructive approach is proposed to directly characterize the level of 87Rb in a hermetic MEMS vapor cell. The MEMS-compatible 87Rb evaporation technique is developed to dispense 87Rb in the vapor cells with high efficiency. The morphology of the metallic 87Rb in the MEMS vapor cell is visualized by the non-destructive X-ray technique, and the measured contact angle is 43° ± 2°. Combined with the image recognition, the quantitative characterization of the 87Rb is achieved, and the consumption rates of 87Rb in MEMS cells are experimentally investigated. The presented approach is beneficial for the fabrication and performance enhancement of vapor cells for atomic magnetometers.

DOI
10.35848/1347-4065/ad43ce

Related papers

Characterization of 87Rb MEMS vapor cells for miniature atomic magnetometers

Minwei Jiang, Hao Zhai, Chunyu Jiang +9 more

Accurate characterization of atomic vapor cells is crucial for enhancing the sensitivity of miniature atomic magnetometers. In this study, a fast and efficient approach is developed to characterize relaxation properties of the inner surface of the 87Rb micro-electro-mechanical systems (MEMS) vapor cell. Based on the zero-field level crossing effect, the transverse relaxation rate was experimentally determined, and the depolarization coefficient of 0.097 for atom-wall collisions in the 87Rb MEMS vapor cell was obtained. The experiments demonstrated that the alkali-wall collision relaxation gradually dominates the depolarization of the 87Rb ensemble as the radius of the vapor cell decreases. This research provides a quantitative method to evaluate the effectiveness of the MEMS vapor cell anti-relaxation coatings and offers the design inspiration for MEMS atomic vapor cells from the perspective of relaxation characterization. It is beneficial for the development of weak magnetic field detections such as biomagnetism detection in ambient environments.

Applied Physics Letters•Aug 7, 2023•12 citations

Non-destructive MEMS atomic vapor cells characterization by Raman spectroscopy and image analysis

Sylvain Karlen, J. Gobet, Thomas Overstolz +1 more

The use of innovative and non-destructive methods to characterize the content of MEMS atomic vapor cells for atomic devices is reported: Raman spectroscopy is used as a fast and quantitative method to estimate the Nitrogen pressure inside the cell cavity and image analysis is used to quantify the amount of metallic Rubidium. These techniques can be used for buffer gas pressure optimization and cell lifetime assessment.

European Frequency and Time Forum•Apr 1, 2016•2 citations

Preparation of microfabricated alkali atomic vapor cells with good hermeticity

Yali Liu, Wei Li

The microfabricated alkali atomic vapor cells are essential for the chip scale quantum sensing instruments which provide a robust, simple platform for precision measurement for a quantum system. In order to solve the problems of difficult quantitative filling of alkali atoms and poor hermeticity in the fabricated process of the cells, the preparation of microfabricated alkali atomic vapor cells with good hermeticity is studied. The cells are fabricated by the microelectromechanical system (MEMS) technology. Rubidium (Rb) atomic vapor cells with nitrogen (N 2 ) as buffer gas are successfully obtained by photolysis of rubidium azide (RbN 3 ), which is confirmed by the presence of Rb vapor in the cells through absorption spectroscopy for the 5S 1/2 → 5P 3/2 and 5S 1/2 → 5P 1/2 transitions in Rb atoms at 780 nm and 795 nm. The influences of filling amount and baking temperature of RbN 3 solution on the hermeticity of the microfabricated atomic vapor cells are demonstrated. Also, the influences of filling amount of Rb atoms and temperature on the absorption spectrum intensities of Rb vapor in the cells are studied through a theoretical analysis. This research provides a reference for the design and preparation of high quality microfabricated alkali atomic vapor cells.

Measurement Sensors•Feb 17, 2025•1 citation

Lifetime assessment of RbN_3-filled MEMS atomic vapor cells with Al_2O_3 coating

Sylvain Karlen, J. Gobet, Thomas Overstolz +2 more

coated cells is a very promising approach for low-cost wafer-level fabrication. Here we present a detailed lifetime study of such cells. The rubidium consumption being the main identified cell failure mode, it is monitored with an novel image analysis technique and with high temperature long term aging tests.

Optics Express•Jan 26, 2017•71 citations

Optimization of Beam Characteristics for Quantum Magnetometers Based on 3D Mems Alkali Vapor Cells

Wenqi Li, Jintang Shang

This paper reports, for the first time, a systematic optimization of beam characteristics for quantum magnetometers utilizing 3D MEMS rubidium vapor cells. A novel single-beam quantum magnetometer is designed where the beam characteristics can be modified and characterized in situ. The optimized beam diameter exhibits more homogeneous spatial distribution, resulting in an increase of up to 327.3% for the polarization lifetime of the atomic ensemble within 3D MEMS vapor cells. In addition, the optimized beam diameter effectively increases the number of atoms interacting with photons, leading to an improvement of 962.5% in the response slope of the quantum magnetometer. The experimental results provide valuable insights and practical guidelines for the design of high-performance single-beam quantum magnetometers based on 3D MEMS alkali vapor cells.

IEEE International Conference on Micro Electro Mechanical Systems (MEMS)•Jan 25, 2026•0 citations

Determination of atomic number density in MEMS vapor cells via single-pass absorption spectroscopy (SPAS)

Sumit Achar, Sinha, Shivam, M Ezhilarasan +2 more

Micro-electro-mechanical systems (MEMS)-based (chip-scale) alkali vapor cells are key components in emerging quantum technologies, where device performance critically depends on the atomic number density. Thus, it is important to have an accurate estimate of the atomic number density in MEMS-based alkali vapor cells to optimize light-matter interactions and design efficient quantum sensing systems. Here, a quantitatively validated method is presented for determining the rubidium (Rb) atomic number density in warm vapor using Single-Pass Absorption Spectroscopy (SPAS). The absolute transmission spectra are measured and modeled using the 780.24~nm and 420.29~nm transitions in Rb-filled MEMS vapor. The theoretical model employs a density-matrix formalism within the Lindblad framework and incorporates directly measurable experimental parameters, such as laser beam power, diameter, and cell temperature. The model explicitly accounts for optical pumping, Doppler broadening, and transit-time broadening effects and exhibits quantitative agreement ($> 99\%$) with experimental spectra over a broad range of temperatures (293-353~K), laser probe powers of approximately 10~$μ$W-100~$μ$W at the 780.24~nm transition and 8~$μ$W-80~$μ$W at the 420.29~nm transition, and cell lengths (2--100~mm). This method demonstrates a practical and reliable approach for determining the density of alkali vapor cells for quantum sensing, metrology, and quantum communication applications.

arXiv:2511.00526•Nov 1, 2025•1 citation
Abstract Quantitative assessments of the level and lifetime of alkali metal in the atomic vapor cells are essential for improving the stability of atomic magnetometers. In this paper, a fast and non-destructive approach is proposed to directly characterize the level of 87Rb in a hermetic MEMS vapor cell. The MEMS-compatible 87Rb evaporation technique is developed to dispense 87Rb in the vapor cells with high efficiency. The morphology of the metallic 87Rb in the MEMS vapor cell is visualized by the non-destructive X-ray technique, and the measured contact angle is 43° ± 2°. Combined with the image recognition, the quantitative characterization of the 87Rb is achieved, and the consumption rates of 87Rb in MEMS cells are experimentally investigated. The presented approach is beneficial for the fabrication and performance enhancement of vapor cells for atomic magnetometers.
Accurate characterization of atomic vapor cells is crucial for enhancing the sensitivity of miniature atomic magnetometers. In this study, a fast and efficient approach is developed to characterize relaxation properties of the inner surface of the 87Rb micro-electro-mechanical systems (MEMS) vapor cell. Based on the zero-field level crossing effect, the transverse relaxation rate was experimentally determined, and the depolarization coefficient of 0.097 for atom-wall collisions in the 87Rb MEMS vapor cell was obtained. The experiments demonstrated that the alkali-wall collision relaxation gradually dominates the depolarization of the 87Rb ensemble as the radius of the vapor cell decreases. This research provides a quantitative method to evaluate the effectiveness of the MEMS vapor cell anti-relaxation coatings and offers the design inspiration for MEMS atomic vapor cells from the perspective of relaxation characterization. It is beneficial for the development of weak magnetic field detections such as biomagnetism detection in ambient environments.
The microfabricated alkali atomic vapor cells are essential for the chip scale quantum sensing instruments which provide a robust, simple platform for precision measurement for a quantum system. In order to solve the problems of difficult quantitative filling of alkali atoms and poor hermeticity in the fabricated process of the cells, the preparation of microfabricated alkali atomic vapor cells with good hermeticity is studied. The cells are fabricated by the microelectromechanical system (MEMS) technology. Rubidium (Rb) atomic vapor cells with nitrogen (N 2 ) as buffer gas are successfully obtained by photolysis of rubidium azide (RbN 3 ), which is confirmed by the presence of Rb vapor in the cells through absorption spectroscopy for the 5S 1/2 → 5P 3/2 and 5S 1/2 → 5P 1/2 transitions in Rb atoms at 780 nm and 795 nm. The influences of filling amount and baking temperature of RbN 3 solution on the hermeticity of the microfabricated atomic vapor cells are demonstrated. Also, the influences of filling amount of Rb atoms and temperature on the absorption spectrum intensities of Rb vapor in the cells are studied through a theoretical analysis. This research provides a reference for the design and preparation of high quality microfabricated alkali atomic vapor cells.
This paper reports, for the first time, a systematic optimization of beam characteristics for quantum magnetometers utilizing 3D MEMS rubidium vapor cells. A novel single-beam quantum magnetometer is designed where the beam characteristics can be modified and characterized in situ. The optimized beam diameter exhibits more homogeneous spatial distribution, resulting in an increase of up to 327.3% for the polarization lifetime of the atomic ensemble within 3D MEMS vapor cells. In addition, the optimized beam diameter effectively increases the number of atoms interacting with photons, leading to an improvement of 962.5% in the response slope of the quantum magnetometer. The experimental results provide valuable insights and practical guidelines for the design of high-performance single-beam quantum magnetometers based on 3D MEMS alkali vapor cells.
Micro-electro-mechanical systems (MEMS)-based (chip-scale) alkali vapor cells are key components in emerging quantum technologies, where device performance critically depends on the atomic number density. Thus, it is important to have an accurate estimate of the atomic number density in MEMS-based alkali vapor cells to optimize light-matter interactions and design efficient quantum sensing systems. Here, a quantitatively validated method is presented for determining the rubidium (Rb) atomic number density in warm vapor using Single-Pass Absorption Spectroscopy (SPAS). The absolute transmission spectra are measured and modeled using the 780.24~nm and 420.29~nm transitions in Rb-filled MEMS vapor. The theoretical model employs a density-matrix formalism within the Lindblad framework and incorporates directly measurable experimental parameters, such as laser beam power, diameter, and cell temperature. The model explicitly accounts for optical pumping, Doppler broadening, and transit-time broadening effects and exhibits quantitative agreement (>99%> 99\%>99%) with experimental spectra over a broad range of temperatures (293-353~K), laser probe powers of approximately 10~μμμW-100~μμμW at the 780.24~nm transition and 8~μμμW-80~μμμW at the 420.29~nm transition, and cell lengths (2--100~mm). This method demonstrates a practical and reliable approach for determining the density of alkali vapor cells for quantum sensing, metrology, and quantum communication applications.