Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)

Cryogenic Signal Processing based on Single-Flux-Quantum Circuit for Advanced Superconducting Nanostrip Single-Photon Detector Systems

Shigeyuki Miyajima, Hirotaka Terai, Masahiro Yabuno, Fumihiro China, Shigehito Miki

Published Mar 19, 2024• 0 citations
Publisher

Abstract

A single-flux-quantum circuit is a promising device for a cryogenic signal processor for a superconducting nanostrip single photon detector (SNSPD) due to its high-speed operation, low power dissipation, and low timing jitter. The cryogenic signal processor based on the SFQ circuits can sense the output signals of multi-pixel SNSPDs with low timing jitter in a low temperature stage, which provides an advanced SNSPD system such as a high-count rate system, a two-photon coincidence system, a single-photon imaging system, and so forth. We have developed and demonstrated some SNSPD systems using an SFQ signal processor in a 0.1-W Gifford-McMahon (GM) cryocooler. In this review, we introduce a cryogenic signal processor based on SFQ circuits for advanced SNSPD systems.

DOI
10.2221/jcsj.59.88

Related papers

Cryogenic Signal Processing Using Single-flux-quantum Circuit for High Performance Multi-pixel Superconducting Nanowire Single-photon Detectors

Hirotaka Terai, Shigehito Miki, Taro Yamashita +2 more

Superconducting nanowire single-photon detectors (SSPDs) with a system detection efficiency (SDE) of over 80% are now commercially available and being used in compact Gifford-McMahon refrigerators. However, not only high SDE, but also total performance including a low dark count rate, high maximum count rate and/or low timing jitter are important for many applications. A multi-pixel SSPD combined with signal processing using a single-flux-quantum (SFQ) circuit is a very promising approach to improve the system performance of SSPDs. In this review, we introduce our recent activities on cryogenic signal processing using SFQ circuits to realize high-performance multi-pixel SSPDs.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2017•0 citations

Single-flux-quantum signal processors monolithically integrated with a superconducting nanostrip single-photon detector array

Shigeyuki Miyajima, Masahiro Yabuno, Shigehito Miki +3 more

We developed a monolithic integration process for a superconducting nanostrip single-photon detector (SNSPD) and a cryogenic signal processor based on a single-flux-quantum (SFQ) circuit. Sixteen-pixel SNSPDs consisting of a 10-nm-thick and 100-nm-wide NbTiN nanowire were fabricated on a 3-in. Si wafer with an SFQ merger fabricated by the National Institute of Advanced Industrial Science and Technology Nb 2.5 kA/cm2 standard process 2. Subsequently, we illuminated the photons on the 16-pixel SNSPD array through an optical fiber and obtained a similar bias-current dependence of the detection efficiency with a single-pixel SNSPD without the SFQ merger. This indicates that the SFQ merger works correctly, and that the power dissipation of the SFQ circuit, which is estimated to be 200 μW, does not deteriorate the photon detection of SNSPD fabricated on the same chip with a size of 5 × 5 mm2. Furthermore, we measured timing jitter using a pulsed laser as the photon source. Owing to the careful tuning of the wiring length between each pixel of the 16-pixel SNSPD and each input port of the SFQ merger, the obtained timing jitter was 41.4 ps, which is approximately equal to or less than that of the single-pixel SNSPD.

Applied Physics Letters•May 1, 2023•13 citations

Demonstration of digital readout circuit for superconducting nanowire single photon detector

Thomas Ortlepp, M. Hofherr, Ludwig Fritzsch +6 more

We demonstrate the transfer of single photon triggered electrical pulses from a superconducting nanowire single photon detector (SNSPD) to a single flux quantum (SFQ) pulse. We describe design and test of a digital SFQ based SNSPD readout circuit and demonstrate its correct operation. Both circuits (SNSPD and SFQ) operate under the same cryogenic conditions and are directly connected by wire bonds. A future integration of the present multi-chip configuration seems feasible because both fabrication process and materials are very similar. In contrast to commonly used semiconductor amplifiers, SFQ circuits combine very low power dissipation (a few microwatts) with very high operation speed, thus enabling count-rates of several gigahertz. The SFQ interface circuit simplifies the SNSPD readout and enables large numbers of detectors for future compact multi-pixel systems with single photon counting resolution. The demonstrated circuit has great potential for scaling the present interface solution to 1,000 detectors by using a single SFQ chip.

Optics Express•Sep 8, 2011•57 citations

Superconducting Single-Flux-Quantum Logic Circuit

Hirotaka Terai, Taro YAMASHITA, Shigehito Miki +2 more

The superconducting single-flux-quantum (SFQ) circuit is the ultimate energy-efficient digital circuit technology. The SFQ circuits are very promising for applications not only to huge systems such as supercomputers and/or high-end routers but also to the signal processing circuit operating with superconducting detectors. We introduce the recent progress in the SFQ circuit technology focusing on the application combined with superconducting single-photon detectors (SSPDs). The four-pixel SSPD array was successfully operated with the SFQ signal processing circuit in the 0.1 W Gifford McMahon refrigerator.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2013•0 citations

Single-Flux-Quantum Based Coincidence Circuits Using Nb/AlOx/Nb Josephson Junctions with Critical Current Density of 10 kA/cm2

Shigeyuki Miyajima, Hirotaka Terai, Shigehito Miki

We demonstrated a coincidence circuit based on single flux quantum (SFQ) circuits with high-time accuracy for a two-photon interferometer using superconducting nanostrip photon detectors (SNSPDs). The coincidence circuit was designed to have 3 different time windows of 30 ps, 100 ps, and 200 ps, which can be selectable on demand. Furthermore, each time window can be fine-tuned by changing the applied bias currents. The circuit was fabricated by the AIST high-speed standard process based on Nb/AlOx/Nb junctions with critical current density of 10 kA/cm2. We experimentally evaluated the time window of the coincidence circuit at temperatures below 2.4 K in a 0.1-W Gifford-McMahon (GM) cryocooler.

IEICE Transactions on Electronics•Nov 27, 2024•0 citations

Readout Electronics Using Single-Flux-Quantum Circuit Technology for Superconducting Single-Photon Detector Array

Hirotaka Terai, Shigehito Miki, Zhen Wang

Superconducting single-photon detectors (SSPDs) based on NbN nanowires possess properties such as high counting rate, low dark count rate and small timing jitter, which are promising characteristics for a quantum key distribution system. An SSPD array has recently attracted attention, because it can provide a higher counting rate, and spatial and photon-number resolutions. We propose readout electronics using single-flux-quantum (SFQ) circuits to process a large number of output signals from an SSPD array. We designed and tested an interface circuit between an SSPD and SFQ circuit, and successfully observed SFQ pulse generation for an input pulse with a current amplitude of 17.4 ~ 36.4 muA , which is comparable with an output current amplitude of the SSPD. The interface circuit was also operational for an input pulse duration of 1.6 ns, which is shorter than the typical recovery time of the SSPD.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•63 citations
A single-flux-quantum circuit is a promising device for a cryogenic signal processor for a superconducting nanostrip single photon detector (SNSPD) due to its high-speed operation, low power dissipation, and low timing jitter. The cryogenic signal processor based on the SFQ circuits can sense the output signals of multi-pixel SNSPDs with low timing jitter in a low temperature stage, which provides an advanced SNSPD system such as a high-count rate system, a two-photon coincidence system, a single-photon imaging system, and so forth. We have developed and demonstrated some SNSPD systems using an SFQ signal processor in a 0.1-W Gifford-McMahon (GM) cryocooler. In this review, we introduce a cryogenic signal processor based on SFQ circuits for advanced SNSPD systems.
Superconducting nanowire single-photon detectors (SSPDs) with a system detection efficiency (SDE) of over 80% are now commercially available and being used in compact Gifford-McMahon refrigerators. However, not only high SDE, but also total performance including a low dark count rate, high maximum count rate and/or low timing jitter are important for many applications. A multi-pixel SSPD combined with signal processing using a single-flux-quantum (SFQ) circuit is a very promising approach to improve the system performance of SSPDs. In this review, we introduce our recent activities on cryogenic signal processing using SFQ circuits to realize high-performance multi-pixel SSPDs.
We developed a monolithic integration process for a superconducting nanostrip single-photon detector (SNSPD) and a cryogenic signal processor based on a single-flux-quantum (SFQ) circuit. Sixteen-pixel SNSPDs consisting of a 10-nm-thick and 100-nm-wide NbTiN nanowire were fabricated on a 3-in. Si wafer with an SFQ merger fabricated by the National Institute of Advanced Industrial Science and Technology Nb 2.5 kA/cm2 standard process 2. Subsequently, we illuminated the photons on the 16-pixel SNSPD array through an optical fiber and obtained a similar bias-current dependence of the detection efficiency with a single-pixel SNSPD without the SFQ merger. This indicates that the SFQ merger works correctly, and that the power dissipation of the SFQ circuit, which is estimated to be 200 μW, does not deteriorate the photon detection of SNSPD fabricated on the same chip with a size of 5 × 5 mm2. Furthermore, we measured timing jitter using a pulsed laser as the photon source. Owing to the careful tuning of the wiring length between each pixel of the 16-pixel SNSPD and each input port of the SFQ merger, the obtained timing jitter was 41.4 ps, which is approximately equal to or less than that of the single-pixel SNSPD.
We demonstrate the transfer of single photon triggered electrical pulses from a superconducting nanowire single photon detector (SNSPD) to a single flux quantum (SFQ) pulse. We describe design and test of a digital SFQ based SNSPD readout circuit and demonstrate its correct operation. Both circuits (SNSPD and SFQ) operate under the same cryogenic conditions and are directly connected by wire bonds. A future integration of the present multi-chip configuration seems feasible because both fabrication process and materials are very similar. In contrast to commonly used semiconductor amplifiers, SFQ circuits combine very low power dissipation (a few microwatts) with very high operation speed, thus enabling count-rates of several gigahertz. The SFQ interface circuit simplifies the SNSPD readout and enables large numbers of detectors for future compact multi-pixel systems with single photon counting resolution. The demonstrated circuit has great potential for scaling the present interface solution to 1,000 detectors by using a single SFQ chip.
The superconducting single-flux-quantum (SFQ) circuit is the ultimate energy-efficient digital circuit technology. The SFQ circuits are very promising for applications not only to huge systems such as supercomputers and/or high-end routers but also to the signal processing circuit operating with superconducting detectors. We introduce the recent progress in the SFQ circuit technology focusing on the application combined with superconducting single-photon detectors (SSPDs). The four-pixel SSPD array was successfully operated with the SFQ signal processing circuit in the 0.1 W Gifford McMahon refrigerator.
We demonstrated a coincidence circuit based on single flux quantum (SFQ) circuits with high-time accuracy for a two-photon interferometer using superconducting nanostrip photon detectors (SNSPDs). The coincidence circuit was designed to have 3 different time windows of 30 ps, 100 ps, and 200 ps, which can be selectable on demand. Furthermore, each time window can be fine-tuned by changing the applied bias currents. The circuit was fabricated by the AIST high-speed standard process based on Nb/AlOx/Nb junctions with critical current density of 10 kA/cm2. We experimentally evaluated the time window of the coincidence circuit at temperatures below 2.4 K in a 0.1-W Gifford-McMahon (GM) cryocooler.
Superconducting single-photon detectors (SSPDs) based on NbN nanowires possess properties such as high counting rate, low dark count rate and small timing jitter, which are promising characteristics for a quantum key distribution system. An SSPD array has recently attracted attention, because it can provide a higher counting rate, and spatial and photon-number resolutions. We propose readout electronics using single-flux-quantum (SFQ) circuits to process a large number of output signals from an SSPD array. We designed and tested an interface circuit between an SSPD and SFQ circuit, and successfully observed SFQ pulse generation for an input pulse with a current amplitude of 17.4 ~ 36.4 muA , which is comparable with an output current amplitude of the SSPD. The interface circuit was also operational for an input pulse duration of 1.6 ns, which is shorter than the typical recovery time of the SSPD.