Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AIAA SciTech Forum

Slow Light Imaging Spectroscopy: Sensitivity of the Instrument Function to Optical Thickness and Gate Delay

Amirhossein Abbasszadehrad, Jason M. Meyers, Kevin A. Brown, Junhwi Bak, James R. Creel, Arthur Dogariu, Richard B. Miles

Published Jan 4, 2024• 1 citation
Publisher

Abstract

In this study, we investigate the effect of the optical thickness of an atomic vapor cell and the delay of the gated camera on the instrument function in Slow Light Imaging Spectroscopy. In an atomic vapor medium, the slow light effect happens at certain frequency windows where there is a large slope of the index of refraction versus frequency. The extent of these windows depends on the important parameters of the vapor cell (i.e., the optical thickness). Furthermore, the gate delay determines the minimum amount of delay that a signal needs to experience before it is detected. These two parameters determine the shape of the instrument function of the spectrometer in slow light imaging spectroscopy. Simulation and experimental results show that when absorption lines of cesium vapor at 852.1 nm are used as a delay medium, the instrument function at low temperature consists of four peaks corresponding to the steep refractive index gradients at either side of the two hyperfine absorption lines. By increasing the temperature, these peaks move away from the absorption lines. When the two peaks between the two absorption lines move away from their corresponding absorption lines, they move closer to each other until they blend, forming a strong peak. By increasing the gate delay, the four peaks of the instrument function reappear.

DOI
10.2514/6.2024-0807

Related papers

Slow Light Imaging Spectroscopy (SLIS): A Comparison of Different Filters

Amirhossein Abbasszadeh Rad, Anuj Rekhy, Arthur Dogariu +1 more

In this study, we model four atomic filters useful in slow light imaging spectroscopy. We calculate delay using the group velocity in rubidium at 780 nm, mercury at 254 nm, and cesium at 852 nm and 387.6 nm at different temperatures and path lengths of the atomic filter. We also calculate the output of a 5 ns pulse by propagating its Fourier components through cells. Then we compare the results of these two numerical models with the ideal limit set only by the natural linewidth of the atomic transition. This ideal limit corresponds to cases where the frequency is right between two equally strong absorption lines. In this case, delay and transmittance are as high as possible. By tuning the frequency to peaks of transmittance, the filter can work close to ideal. Cesium cell at 387.6, though unable to reach the ideal limit at normal temperatures and path lengths, can still separate this frequency at the cost of less than ideal transmittance.

AIAA AVIATION Forum•Jun 8, 2020•7 citations

Slow Light Prism Enhanced Spectroscopy (SLOPES)

Amirhossein Abbasszadehrad, Jason M. Meyers, Arthur Dogariu +1 more

We report a new spectroscopy method achieved by combined refraction and propagation delay of light pulses passing through a prism cell filled with an atomic vapor. The atomic vapor medium has strong refractive index gradients near the atomic resonant absorption features, and these features enable the separation in time and space of different spectral features of a light pulse propagating through the vapor cell. The gradient of the refractive index leads to a slowing of the light pulse, while simultaneously, the magnitude of the refractive index and the prismatic windows or internal prism elements of the atomic vapor cell spatially separate the frequencies due to dispersion. The combination of these two effects leads to high-resolution spectral selectivity and strong suppression of out-of-band light. Applications are achieved for Rayleigh, Raman, and Thomson spectroscopy for which the wavelength of the scattering spectra tracks the wavelength of the excitation laser source. The laser is tuned such that the spectral line of interest falls near the resonance of the atomic vapor. Applications for rotational Raman spectroscopy are of particular interest since specific Raman lines can be selected while other Raman lines as well as background Rayleigh and other scattering are strongly rejected.

AIAA AVIATION Forum•Jul 27, 2024•0 citations

Velocity anisotropy effect in pump-probe spectra of cesium in a micrometric thickness optical cell

Pradip Narayan Ghosh, S. Mitra, Biswajit Ray +4 more

The pump-probe spectra in a cell of micrometric thickness containing cesium vapor are reported. The line shape and nonlinear features observed in the case of fluorescence in the direction parallel to the cell windows and the transmission spectra observed along the propagation direction of the probe beam show considerable differences in the spectral profiles. We observed Electromagnetically Induced Transparency (EIT) and enhanced Velocity Selective Optical Pumping (VSOP) signals. Atoms moving nearly parallel to the windows and perpendicular to the collinear pump and probe beams will see much lower Doppler shift of incident frequencies and hence will lead to considerable narrowing of the Doppler background in the fluorescence spectra. The coherence decay rate is also low for such atoms as they do not meet with the cell walls. A theoretical model based on five level optical Bloch equations is used to simulate the spectra. The Doppler convolution includes all possible orientation of atomic velocities with respect to the laser beam direction. The simulated curves reproduce the observed sharp EIT peaks and enhanced broad VSOP signals for the closed probe transition in the fluorescence and absorption spectra. The observed effect of the light intensity and temperature change on the non-linear features is reproduced by the simulation.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 8, 2015•0 citations

Saturation effects in the sub-Doppler spectroscopy of cesium vapor confined in an extremely thin cell

C. Andreeva, S. Cartaleva, L. Petrov +5 more

Saturation effects affecting absorption and fluorescence spectra of an atomic vapor confined in an extremely thin cell (cell thickness $L<1\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{m}$) are investigated experimentally and theoretically. The study is performed on the ${D}_{2}$ line $(\ensuremath{\lambda}=852\phantom{\rule{0.3em}{0ex}}\mathrm{nm})$ of Cs and concentrates on the two situations $L=\ensuremath{\lambda}∕2$ and $L=\ensuremath{\lambda}$, the most contrasted ones with respect to the length dependence of the coherent Dicke narrowing. For $L=\ensuremath{\lambda}∕2$, the Dicke-narrowed absorption profile simply broadens and saturates in amplitude when increasing the light intensity, while for $L=\ensuremath{\lambda}$, sub-Doppler dips of reduced absorption at the line-center appear on the broad absorption profile. For a fluorescence detection at $L=\ensuremath{\lambda}$, saturation induces narrow dips, but only for hyperfine components undergoing a population loss through optical pumping. These experimental results are interpreted with the help of the various existing models and are compared with numerical calculations based upon a two-level modeling that considers both a closed and an open system.

arXiv:0706.0837•Physical Review A•Jul 31, 2007•64 citations

Thermometry of liquid water through slow light imaging spectroscopy

Boris S. Leonov, Robert T. Randolph, Anuj Rekhy +3 more

This work presents the first, to the best of our knowledge, experimental demonstration of slow light imaging spectroscopy for thermometry of liquid water. This novel technique for measuring temperature relies on detecting the spectral shift of Brillouin peaks in water using the temporal delay through a cell containing an atomic vapor. Stand-off sensing capabilities are achieved by time-domain measurements of Brillouin scattering tuned to be near a rubidium atomic resonance and passed through a cell filled with rubidium vapor. An injection seeded optical parametric oscillator (OPO) is demonstrated to be a versatile light source for slow light imaging spectroscopy applications. The narrow OPO pulse spectrum allows for a precise profiling of slow light features of rubidium and accurate tracking of the temperature dependence of Brillouin scattering spectral shift. A comparison between the experimental data and numerical simulation over a temperature range of 20 to 99 degrees Celsius shows a good agreement for both qualitative and quantitative results.

Optics Express•Dec 21, 2022•14 citations

Seeded Optical Parametric Oscillator as a Light Source for Slow-Light Imaging Spectroscopy

Boris S. Leonov, Robert T. Randolph, Anuj Rekhy +5 more

View Video Presentation: https://doi.org/10.2514/6.2023-1861.vid In this article, the authors discuss an experimental demonstration of a seeded Optical Parametric Oscillator as a light source for Slow Light Imaging Spectroscopy applications. An advantage of such a system, namely narrow linewidth of less than 400 MHz, allows for precise profiling of slow light features of atomic rubidium vapor, produced by high refractive index gradients in the vicinity of resonant transitions. Time delays of up to 48 ns were observed with a clear definition of the delayed pulse from the parasitic Mie and Rayleigh scattering. A comparison between the experimental data and numerical simulation over a frequency detuning range from -1 GHz to 4 GHz shows a good agreement for both qualitative and quantitative results.

AIAA SciTech Forum•Jan 19, 2023•1 citation
In this study, we investigate the effect of the optical thickness of an atomic vapor cell and the delay of the gated camera on the instrument function in Slow Light Imaging Spectroscopy. In an atomic vapor medium, the slow light effect happens at certain frequency windows where there is a large slope of the index of refraction versus frequency. The extent of these windows depends on the important parameters of the vapor cell (i.e., the optical thickness). Furthermore, the gate delay determines the minimum amount of delay that a signal needs to experience before it is detected. These two parameters determine the shape of the instrument function of the spectrometer in slow light imaging spectroscopy. Simulation and experimental results show that when absorption lines of cesium vapor at 852.1 nm are used as a delay medium, the instrument function at low temperature consists of four peaks corresponding to the steep refractive index gradients at either side of the two hyperfine absorption lines. By increasing the temperature, these peaks move away from the absorption lines. When the two peaks between the two absorption lines move away from their corresponding absorption lines, they move closer to each other until they blend, forming a strong peak. By increasing the gate delay, the four peaks of the instrument function reappear.
In this study, we model four atomic filters useful in slow light imaging spectroscopy. We calculate delay using the group velocity in rubidium at 780 nm, mercury at 254 nm, and cesium at 852 nm and 387.6 nm at different temperatures and path lengths of the atomic filter. We also calculate the output of a 5 ns pulse by propagating its Fourier components through cells. Then we compare the results of these two numerical models with the ideal limit set only by the natural linewidth of the atomic transition. This ideal limit corresponds to cases where the frequency is right between two equally strong absorption lines. In this case, delay and transmittance are as high as possible. By tuning the frequency to peaks of transmittance, the filter can work close to ideal. Cesium cell at 387.6, though unable to reach the ideal limit at normal temperatures and path lengths, can still separate this frequency at the cost of less than ideal transmittance.
We report a new spectroscopy method achieved by combined refraction and propagation delay of light pulses passing through a prism cell filled with an atomic vapor. The atomic vapor medium has strong refractive index gradients near the atomic resonant absorption features, and these features enable the separation in time and space of different spectral features of a light pulse propagating through the vapor cell. The gradient of the refractive index leads to a slowing of the light pulse, while simultaneously, the magnitude of the refractive index and the prismatic windows or internal prism elements of the atomic vapor cell spatially separate the frequencies due to dispersion. The combination of these two effects leads to high-resolution spectral selectivity and strong suppression of out-of-band light. Applications are achieved for Rayleigh, Raman, and Thomson spectroscopy for which the wavelength of the scattering spectra tracks the wavelength of the excitation laser source. The laser is tuned such that the spectral line of interest falls near the resonance of the atomic vapor. Applications for rotational Raman spectroscopy are of particular interest since specific Raman lines can be selected while other Raman lines as well as background Rayleigh and other scattering are strongly rejected.
The pump-probe spectra in a cell of micrometric thickness containing cesium vapor are reported. The line shape and nonlinear features observed in the case of fluorescence in the direction parallel to the cell windows and the transmission spectra observed along the propagation direction of the probe beam show considerable differences in the spectral profiles. We observed Electromagnetically Induced Transparency (EIT) and enhanced Velocity Selective Optical Pumping (VSOP) signals. Atoms moving nearly parallel to the windows and perpendicular to the collinear pump and probe beams will see much lower Doppler shift of incident frequencies and hence will lead to considerable narrowing of the Doppler background in the fluorescence spectra. The coherence decay rate is also low for such atoms as they do not meet with the cell walls. A theoretical model based on five level optical Bloch equations is used to simulate the spectra. The Doppler convolution includes all possible orientation of atomic velocities with respect to the laser beam direction. The simulated curves reproduce the observed sharp EIT peaks and enhanced broad VSOP signals for the closed probe transition in the fluorescence and absorption spectra. The observed effect of the light intensity and temperature change on the non-linear features is reproduced by the simulation.
Saturation effects affecting absorption and fluorescence spectra of an atomic vapor confined in an extremely thin cell (cell thickness $L<1\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{m}$) are investigated experimentally and theoretically. The study is performed on the D2{D}_{2}D2​ line $(\ensuremath{\lambda}=852\phantom{\rule{0.3em}{0ex}}\mathrm{nm})$ of Cs and concentrates on the two situations $L=\ensuremath{\lambda}∕2$ and $L=\ensuremath{\lambda}$, the most contrasted ones with respect to the length dependence of the coherent Dicke narrowing. For $L=\ensuremath{\lambda}∕2$, the Dicke-narrowed absorption profile simply broadens and saturates in amplitude when increasing the light intensity, while for $L=\ensuremath{\lambda}$, sub-Doppler dips of reduced absorption at the line-center appear on the broad absorption profile. For a fluorescence detection at $L=\ensuremath{\lambda}$, saturation induces narrow dips, but only for hyperfine components undergoing a population loss through optical pumping. These experimental results are interpreted with the help of the various existing models and are compared with numerical calculations based upon a two-level modeling that considers both a closed and an open system.
This work presents the first, to the best of our knowledge, experimental demonstration of slow light imaging spectroscopy for thermometry of liquid water. This novel technique for measuring temperature relies on detecting the spectral shift of Brillouin peaks in water using the temporal delay through a cell containing an atomic vapor. Stand-off sensing capabilities are achieved by time-domain measurements of Brillouin scattering tuned to be near a rubidium atomic resonance and passed through a cell filled with rubidium vapor. An injection seeded optical parametric oscillator (OPO) is demonstrated to be a versatile light source for slow light imaging spectroscopy applications. The narrow OPO pulse spectrum allows for a precise profiling of slow light features of rubidium and accurate tracking of the temperature dependence of Brillouin scattering spectral shift. A comparison between the experimental data and numerical simulation over a temperature range of 20 to 99 degrees Celsius shows a good agreement for both qualitative and quantitative results.
View Video Presentation: https://doi.org/10.2514/6.2023-1861.vid In this article, the authors discuss an experimental demonstration of a seeded Optical Parametric Oscillator as a light source for Slow Light Imaging Spectroscopy applications. An advantage of such a system, namely narrow linewidth of less than 400 MHz, allows for precise profiling of slow light features of atomic rubidium vapor, produced by high refractive index gradients in the vicinity of resonant transitions. Time delays of up to 48 ns were observed with a clear definition of the delayed pulse from the parasitic Mie and Rayleigh scattering. A comparison between the experimental data and numerical simulation over a frequency detuning range from -1 GHz to 4 GHz shows a good agreement for both qualitative and quantitative results.