Cold trapped ions can be excellent sensors for ultra-precision detection of physical quantities, which strongly depends on the measurement situation at hand. The stylus ion trap, formed by two concentric cylinders over a ground plane, holds the promise of relatively simple structure and larger solid angle for optical access and fluorescence collection in comparison with the conventional ion traps. Here we report our fabrication and characterization of the first stylus ion trap constructed in China, aiming for studying quantum optics and sensing weak electric fields in the future. We have observed the stable confinement of the ion in the trapping potential for more than two hours and measured the heating rate of the trap to be dε/dt = 7.10 ± 0.13 meV/s by the Doppler recooling method. Our work starts a way to building practical quantum sensors with high efficiency of optical collection and with ultimate goal for contributing to future quantum information technology.
Cold trapped ions can be excellent sensors for ultra-precision detection of physical quantities, which strongly depends on the measurement situation at hand. The stylus ion trap, formed by two concentric cylinders over a ground plane, holds the promise of relatively simple structure and larger solid angle for optical access and fluorescence collection in comparison with the conventional ion traps. Here we report our fabrication and characterization of the first stylus ion trap constructed in China, aiming for studying quantum optics and sensing weak electric fields in the future. We have observed the stable confinement of the ion in the trapping potential for more than two hours and measured the heating rate of the trap to be dε/dt = 7.10 ± 0.13 meV/s by the Doppler recooling method. Our work starts a way to building practical quantum sensors with high efficiency of optical collection and with ultimate goal for contributing to future quantum information technology.
An electroformed, three-dimensional stylus Paul trap was designed to confine a single atomic ion for use as a sensor to probe the electric-field noise of proximate surfaces. The trap was microfabricated with the UV-LIGA technique to reduce the distance of the ion from the surface of interest. We detail the fabrication process used to produce a 150 μm tall stylus trap with feature sizes of 40 μm. We confined single, laser-cooled, (25)Mg(+) ions with lifetimes greater than 2 h above the stylus trap in an ultra-high-vacuum environment. After cooling a motional mode of the ion at 4 MHz close to its ground state (<n> = 0.34 ± 0.07), the heating rate of the trap was measured with Raman sideband spectroscopy to be 387 ± 15 quanta/s at an ion height of 62 μm above the stylus electrodes.
Trapped, laser-cooled atoms and ions produce intense fluorescence of the order 107~108 photons per second. Detection of this fluorescence enables efficient measurement of the quantum state of qubits based on trapped atoms. It is desirable to collect a large fraction of the photons to make the detection faster and more reliable. Additionally, efficient fluorescence collection can improve the speed and fidelity of remote ion entanglement and quantum gates. Refractive and reflective optics, and optical cavities have all been used to collect the trapped ion fluorescence with up to about 10% efficiency. Here we show a novel ion trap design that incorporates a metallic spherical mirror as the integral part of the trap itself, being its RF electrode. The mirror geometry enables up to 35% solid angle collection of trapped ion fluorescence. The movable central pin electrode of this trap allows precise placement of the ion at the focus of the reflector. We characterize the performance of the mirror, and measure 25% collection efficiency, likely limited by the imperfections of the mirror surface. We also study the properties of the images of single ions formed by the spherical mirror and apply aberration correction with an aspherical element placed outside the vacuum system. Owing to the simplicity of its design, this trap structure can be adapted for microfabrication and integration into more complex trap architectures.
With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.
The electromagnetic manipulation of isolated ions has led to many advances in atomic physics, from laser cooling to precision metrology and quantum control. As technical capability in this area has grown, so has interest in building miniature electromagnetic traps for the development of large-scale quantum information processors. This thesis will primarily focus on using microfabrication techniques to build arrays of miniature ion traps, similar to techniques used in fabricating high component density microprocessors. A specific focus will be on research using a gallium arsenide/aluminum gallium arsenide heterostructure as a trap architecture, as well as the recent testing of different ion traps fabricated at outside foundries. The construction and characterization of a conventional ceramic trap capable of shuttling an ion through a junction will also be detailed, and reveal the need for moving towards lithographically fabricated traps. Combined, these serve as a set of proof-of-principle experiments pointing to methods for designing and building large scale arrays of ion traps capable of constituting a quantum information processor. As traps become smaller, electrical potentials on the electrodes have greater influence on the ion. This not only pertains to intentionally applied voltages, but also to deleterious noise sources, such as thermal Johnson noise and the more significant ``patch potential" noise, which both cause motional heating of the ion. These problematic noise sources dovetail with my thesis research into trap miniaturization since their effects become more pronounced and impossible to ignore for small trap sizes. Therefore characterizing them and investigating ways to suppress them have become an important component of my research. I will describe an experiment using a pair of movable needle electrodes to measure the ion heating rate corresponding to the harmonic frequency of the trap, the ion-electrode distance, and the electrode temperature. This information is used for characterizing the fluctuating potentials and exploring the possibility of suppressing motional heating by cooling the trap electrodes. This source of noise is also observed in other systems, and its characterization could potentially improve other precision experiments, such as those measuring deviations in the gravitational inverse square law with proximate masses.
Measuring physical quantities with unprecedented precision is one of the most important paradigms to extend our fundamental understanding of nature. With the development of new quantum techniques, quantum systems have become a promising platform along the path to pursue higher accuracy and stability of measurement, while the classical methods are approaching their own limitation. Owing to its high stability, long coherence time and good controllability of quantum states, the trapped ion system has attracted much attention as a promising platform for quantum metrology. Recent progress on quantum control of trapped ions in both the scientific and technological aspects greatly advance the potential applications in precision measurement of various physical quantities. The invention of optical comb with ultra-stable laser brings us a new approach to develop a clock working on optical frequency, and features a much higher precision than microwave. This achievement has the potential reform the definition of the basic unit of the international system of units in the near future. New methods of dynamic decoupling or preparing special dressed states significantly extend the coherence time, such that an ultra-sensitive detection of magnetic field can be achieved. By introducing a spin-dependent kick in the phase space, one may also realize rotation measurement with trapped ions and obtain high accuracy with a chip-size apparatus. In this short review, we introduce the principles and designs of optical clock, magnetometer and gyroscope based on trapped ion systems. Owing to its unique features, this platform presents many advantages which can help improving sensitivity and stability, as well as building transportable devices.
The properties of single atomic ions allow them to be used as sensitive probes to measure a multitude of physical effects, ranging from light field distributions to weak force fields, for example electric or magnetic fields. However trapping and controlling ions reliably calls for a more or less encompassing electrode configuration, that depending on the realization can block a substantial amount of access to the ion. Here we present a novel radio-frequency (rf) ion trap geometry that reduces the solid angle obstructed by trap electrodes to a minimum. Since access and proper ion confinement are inherently opposing goals, we realized three different traps with access ranging from 71% to 96% of 4π to characterize the trade-offs. Fabrication, characterization, as well as promising applications of similar traps in quantum optics and field sensing are discussed.