Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Ions on a needle's tip - Traps with enhanced optical and physical access

Robert Maiwald, Dietrich G. Leibfried, J. Britton, Jonas Bergquist, Gerd Leuchs, David J. Wineland

Published Jun 1, 2009• 0 citations
Publisher

Abstract

The properties of single atomic ions allow them to be used as sensitive probes to measure a multitude of physical effects, ranging from light field distributions to weak force fields, for example electric or magnetic fields. However trapping and controlling ions reliably calls for a more or less encompassing electrode configuration, that depending on the realization can block a substantial amount of access to the ion. Here we present a novel radio-frequency (rf) ion trap geometry that reduces the solid angle obstructed by trap electrodes to a minimum. Since access and proper ion confinement are inherently opposing goals, we realized three different traps with access ranging from 71% to 96% of 4π to characterize the trade-offs. Fabrication, characterization, as well as promising applications of similar traps in quantum optics and field sensing are discussed.

DOI
10.1109/cleoe-eqec.2009.5192303

Related papers

Integration of fiber-tip cavities in single-ion traps for quantum sensing

Péter Horák, Nina Podoliak, Hiroki Takahashi +1 more

We investigate geometries for efficient coupling of single ions to fiber-coupled light fields for applications in quantum sensing, quantum metrology, and quantum information processing. Specifically, we discuss the integration of fiber-tip microcavities into radio-frequency ion traps. The distortions of the trapping fields induced by the presence of the optical fibers are simulated for a range of ion trap geometries and the most promising arrangements are identified. Finally, we investigate the use of fiber-tip microcavities with non-spherical mirrors for enhanced ion-light coupling at the center of the trap by appropriate shaping of the cavity modes.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 23, 2017•0 citations

A radio-frequency ion trap with string electrodes

Daisuke Kanai, Taro Hasegawa

A radio-frequency (rf) ion trap with string electrodes is introduced. In this trap configuration, the rf electrodes are made of narrow metal strings, by which a negligibly small portion of light-induced fluorescence (LIF) is blocked. Then the LIF collection solid angle can be maximized. In the demonstration, barium ions are trapped and laser-cooled in the rf trap with string electrodes successfully, and the crystallization is confirmed by the LIF spectrum.

Review of Scientific Instruments•Feb 1, 2018•1 citation

Twisted radio frequency ion traps for all-metal string ion traps

Taro Hasegawa

Twisted radio frequency (rf) ion traps, which have electrode configurations that are twisted variants of conventional linear rf ion traps, have been proposed and successfully demonstrated using charged alumina dust particles. When constructed from thin metal wire electrodes, the twisted traps offer excellent optical accessibility to the trapped ions, making them suitable for applications in quantum information technology. In the experimental demonstration, 14 μm-diameter alumina dust particles were charged via discharge and successfully confined in the twisted trap. A linear chain of trapped particles was observed within the trap.

Review of Scientific Instruments•Oct 1, 2025•0 citations

Motional-mode analysis of trapped ions

Henning Kalis, Frederick Hakelberg, Matthias Wittemer +3 more

We present two methods for characterization of motional-mode configurations that are generally applicable to the weak- and strong-binding limit of single or multiple trapped atomic ions. Our methods are essential to realize control of the individual as well as the common motional degrees of freedom. In particular, when implementing scalable radio-frequency trap architectures with decreasing ion-electrode distances, local curvatures of electric potentials need to be measured and adjusted precisely, e.g., to tune phonon tunneling and control effective spin-spin interaction. We demonstrate both methods using single $^{25}\text{Mg}^{+}$ ions that are individually confined $40\phantom{\rule{0.16em}{0ex}}\ensuremath{\mu}\mathrm{m}$ above a surface-electrode trap array and prepared close to the ground state of motion in three dimensions.

arXiv:1605.01272•Physical Review A•Aug 1, 2016•13 citations

Novel Ion Trap Design for Strong Ion-Cavity Coupling

Alejandro Márquez Seco, Hiroki Takahashi, Matthias Keller

We present a novel ion trap design which facilitates the integration of an optical fiber cavity into the trap structure. The optical fibers are confined inside hollow electrodes in such a way that tight shielding and free movement of the fibers are simultaneously achievable. The latter enables in situ optimization of the overlap between the trapped ions and the cavity field. Through numerical simulations, we systematically analyze the effects of the electrode geometry on the trapping characteristics such as trap depths, secular frequencies and the optical access angle. Additionally, we simulate the effects of the presence of the fibers and confirm the robustness of the trapping potential. Based on these simulations and other technical considerations, we devise a practical trap configuration that isviable to achieve strong coupling of a single ion.

Atoms•Apr 26, 2016•4 citations

Demonstration of a micro-fabricated Penning trap for quantum computing

Tobias Sägesser, Shreyans Jain, Pavel Hrmo +2 more

Trapped-ion quantum information processors are among the leading candidates to realise large-scale quantum computing. In trying to scale the number of confined ions in radio-frequency (rf) traps, several challenges arise due to the use of the rf fields. Ion placement is restricted to the vicinity of the rf null in order to minimise excess micromotion. Miniaturisation of trap geometries is desirable for increased ion density, but is at odds with the need to deliver high-voltage rf and tolerate the resulting power dissipation. We demonstrate a platform based on Penning traps, where ions are radially confined using a strong magnetic field. Static electric fields are then sufficient to provide confinement along the axis. We confine a single9Be + ion in a 3 T magnetic field using a micro-fabricated trap and realise transport to arbitrary positions above the trap chip. Furthermore, we show full quantum control of the spin and motion of the trapped ion. Ground state cooling of all motional modes is achieved and we measure the rate of motional heating due to electric field noise in the absence of an rf drive, obtaining noise levels below those observed in similar rf traps. Since only static fields are required for ion confinement, we can temporarily electrically isolate the trap electrodes from technical noise using switches, further reducing the observed electric field noise.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 17, 2023•0 citations
The properties of single atomic ions allow them to be used as sensitive probes to measure a multitude of physical effects, ranging from light field distributions to weak force fields, for example electric or magnetic fields. However trapping and controlling ions reliably calls for a more or less encompassing electrode configuration, that depending on the realization can block a substantial amount of access to the ion. Here we present a novel radio-frequency (rf) ion trap geometry that reduces the solid angle obstructed by trap electrodes to a minimum. Since access and proper ion confinement are inherently opposing goals, we realized three different traps with access ranging from 71% to 96% of 4π to characterize the trade-offs. Fabrication, characterization, as well as promising applications of similar traps in quantum optics and field sensing are discussed.
We investigate geometries for efficient coupling of single ions to fiber-coupled light fields for applications in quantum sensing, quantum metrology, and quantum information processing. Specifically, we discuss the integration of fiber-tip microcavities into radio-frequency ion traps. The distortions of the trapping fields induced by the presence of the optical fibers are simulated for a range of ion trap geometries and the most promising arrangements are identified. Finally, we investigate the use of fiber-tip microcavities with non-spherical mirrors for enhanced ion-light coupling at the center of the trap by appropriate shaping of the cavity modes.
Twisted radio frequency (rf) ion traps, which have electrode configurations that are twisted variants of conventional linear rf ion traps, have been proposed and successfully demonstrated using charged alumina dust particles. When constructed from thin metal wire electrodes, the twisted traps offer excellent optical accessibility to the trapped ions, making them suitable for applications in quantum information technology. In the experimental demonstration, 14 μm-diameter alumina dust particles were charged via discharge and successfully confined in the twisted trap. A linear chain of trapped particles was observed within the trap.
We present two methods for characterization of motional-mode configurations that are generally applicable to the weak- and strong-binding limit of single or multiple trapped atomic ions. Our methods are essential to realize control of the individual as well as the common motional degrees of freedom. In particular, when implementing scalable radio-frequency trap architectures with decreasing ion-electrode distances, local curvatures of electric potentials need to be measured and adjusted precisely, e.g., to tune phonon tunneling and control effective spin-spin interaction. We demonstrate both methods using single 25Mg+^{25}\text{Mg}^{+}25Mg+ ions that are individually confined $40\phantom{\rule{0.16em}{0ex}}\ensuremath{\mu}\mathrm{m}$ above a surface-electrode trap array and prepared close to the ground state of motion in three dimensions.
We present a novel ion trap design which facilitates the integration of an optical fiber cavity into the trap structure. The optical fibers are confined inside hollow electrodes in such a way that tight shielding and free movement of the fibers are simultaneously achievable. The latter enables in situ optimization of the overlap between the trapped ions and the cavity field. Through numerical simulations, we systematically analyze the effects of the electrode geometry on the trapping characteristics such as trap depths, secular frequencies and the optical access angle. Additionally, we simulate the effects of the presence of the fibers and confirm the robustness of the trapping potential. Based on these simulations and other technical considerations, we devise a practical trap configuration that isviable to achieve strong coupling of a single ion.
Trapped-ion quantum information processors are among the leading candidates to realise large-scale quantum computing. In trying to scale the number of confined ions in radio-frequency (rf) traps, several challenges arise due to the use of the rf fields. Ion placement is restricted to the vicinity of the rf null in order to minimise excess micromotion. Miniaturisation of trap geometries is desirable for increased ion density, but is at odds with the need to deliver high-voltage rf and tolerate the resulting power dissipation. We demonstrate a platform based on Penning traps, where ions are radially confined using a strong magnetic field. Static electric fields are then sufficient to provide confinement along the axis. We confine a single9Be + ion in a 3 T magnetic field using a micro-fabricated trap and realise transport to arbitrary positions above the trap chip. Furthermore, we show full quantum control of the spin and motion of the trapped ion. Ground state cooling of all motional modes is achieved and we measure the rate of motional heating due to electric field noise in the absence of an rf drive, obtaining noise levels below those observed in similar rf traps. Since only static fields are required for ion confinement, we can temporarily electrically isolate the trap electrodes from technical noise using switches, further reducing the observed electric field noise.