Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review Applied

Cyclically Operated Microwave Single-Photon Counter with Sensitivity of 10−22W/Hz

Léo Balembois, J. Travesedo, L. Pallegoix, A. May, Eric Billaud, Marius Villiers, D. Estève, D. Vion, Patrice Bertet, Emmanuel Flurin

Published Jan 23, 2024• 41 citations
Publisher

Abstract

Single-photon detection played an important role in the development of quantum optics. Its implementation in the microwave domain is challenging because the photon energy is five orders of magnitude smaller. In recent years, significant progress has been made in developing single microwave photon detectors (SMPDs) based on superconducting quantum bits or bolometers. In this paper we present a practical SMPD based on the irreversible transfer of an incoming photon to the excited state of a transmon qubit by a four-wave mixing process. This device achieves a detection efficiency $\ensuremath{\eta}=0.43$ and an operational dark count rate $\ensuremath{\alpha}=85\phantom{\rule{0.2em}{0ex}}{\mathrm{s}}^{\ensuremath{-}1}$, mainly due to the out-of-equilibrium microwave photons in the input line. The corresponding power sensitivity is $\mathcal{S}={10}^{\ensuremath{-}22}\phantom{\rule{0.2em}{0ex}}\mathrm{W}/\sqrt{\mathrm{Hz}}$, one order of magnitude lower than the state of the art. The detector operates continuously over hour time-scales with a duty cycle ${\ensuremath{\eta}}_{D}=0.84$, and offers frequency tunability of at least 50 MHz around 7 GHz.

DOI
10.1103/physrevapplied.21.014043

Related papers

Cyclically operated Single Microwave Photon Counter with $10^\mathrm{-22}$ $\mathrm{W/\sqrt{Hz}}$ sensitivity

Léo Balembois, J. Travesedo, L. Pallegoix +7 more

Single photon detection played an important role in the development of quantum optics. Its implementation in the microwave domain is challenging because the photon energy is 5 orders of magnitude smaller. In recent years, significant progress has been made in developing single microwave photon detectors (SMPDs) based on superconducting quantum bits or bolometers. In this paper we present a practical SMPD based on the irreversible transfer of an incoming photon to the excited state of a transmon qubit by a four-wave mixing process. This device achieves a detection efficiency $η= 0.43$ and an operational dark count rate $α= 85$ $\mathrm{s^{-1}}$, mainly due to the out-of-equilibrium microwave photons in the input line. The corresponding power sensitivity is $\mathcal{S} = 10^{-22}$ $\mathrm{W/\sqrt{Hz}}$, one order of magnitude lower than the state of the art. The detector operates continuously over hour timescales with a duty cycle $η_\mathrm{D}=0.84$, and offers frequency tunability of at least 50 MHz around 7 GHz.

arXiv:2307.03614•Jul 7, 2023•11 citations

Noise Mitigation in Single Microwave Photon Counting by Cascaded Quantum Measurements

Alexandre S. May, Leo Sutevski, Jeanne Solard +8 more

Single-photon detection in the microwave domain has recently emerged as a powerful tool for quantum sensing, offering a path beyond the standard quantum limit of linear amplification since their sensitivity is set by their dark-count rate rather than by the vacuum fluctuations of the detected field. Superconducting qubit-based single microwave photon detectors (SMPDs) encode the absorption of itinerant photons into discrete quantum states via engineered, non-destructive interactions. A previously demonstrated implementation based on four-wave mixing achieved high efficiency, but remained limited by residual qubit excitation and thermal noise at the detector input. Here, we propose and demonstrate a new SMPD that relies on two cascaded four-wave mixing processes. The information on photon detection is encoded on two spatially separated qubits, which mitigates noise due to uncorrelated qubit errors. Furthermore, increasing the detection frequency up to 11.7 GHz reduces input thermal noise. These combined advances lead to a record-low power sensitivity of $2.4 \cdot 10^{-23}\mathrm{W}/\sqrt{\mathrm{Hz}}$ over a bandwidth of $230\ \mathrm{kHz}$.

quant-pharXiv:2502.14804•Feb 21, 2025•7 citations

Always-on, highly efficient microwave photon detector based on a superconducting artificial molecule

Vyom Kulkarni, Mohammed Ali Aamir, Simon Sundelin +1 more

Efficient detection of single microwave photons is a key capability for emerging quantum technologies. Yet, it remains far less developed than its optical domain counterpart. Realizing detectors that simultaneously achieve high efficiency, low dark counts, and continuous operation has proved challenging. Existing detectors operate cyclically, forcing a trade-off between efficiency and duty cycle. Here, we demonstrate a continuously operated microwave single-photon detector based on a superconducting artificial molecule. In our scheme, an incoming photon is captured by a bright state of the molecule and then transferred to a long-lived dark state via a driven-dissipative process. Photon ``clicks'' are revealed as quantum jumps in the continuously monitored dark state. We observe a cyclic detection efficiency of $0.73$, and a continuous detection efficiency of $0.47$ over a $5\,\mathrm{MHz}$ instantaneous bandwidth, with a $1\,μ\mathrm{s}$ temporal resolution and a $15\,μ\mathrm{s}$ dead time. By overcoming the trade-off between efficiency and duty cycle, this approach establishes continuous microwave photon detection for quantum sensing, quantum thermodynamics, and fundamental physics.

quant-pharXiv:2608.12972•Aug 14, 2026•1 citation

Enhancing the sensitivity of single-microwave-photon detection with bandwidth tunability

L. Pallegoix, J. Travesedo, Alexandre S. May +4 more

We report on the characteristics of a microwave photon-counter device based on a superconducting transmon qubit. Its design is similar to that described by Balembois [], which achieved a sensitivity of 10 − 22 W / Hz , but with an additional bandwidth-tuning circuit that permits tuning the detection bandwidth over an order of magnitude to optimize the efficiency and noise level of the device. As a result of this feature and improvements in device fabrication, a power sensitivity of 3 × 10 − 23 W / Hz is reached. We confirm the high performance of the device by measuring single-spin microwave fluorescence.

arXiv:2501.07354•Physical Review Applied•Nov 10, 2025•9 citations

Continuous-Wave Single-Photon Transistor Based on a Superconducting Circuit

Oleksandr Kyriienko, Anders Søndberg Sørensen

We propose a microwave frequency single-photon transistor which can operate under continuous wave probing and represents an efficient single microwave photon detector. It can be realized using an impedance matched system of a three level artificial ladder-type atom coupled to two microwave cavities connected to input-output waveguides. Using a classical drive on the upper transition, we find parameter space where a single photon control pulse incident on one of the cavities can be fully absorbed into hybridized excited states. This subsequently leads to series of quantum jumps in the upper manifold and the appearance of a photon flux leaving the second cavity through a separate input-output port. The proposal does not require time variation of the probe signals, thus corresponding to a passive version of a single-photon transistor. The resulting device is robust to qubit dephasing processes, possesses low dark count rate for large anharmonicity, and can be readily implemented using current technology.

arXiv:1603.06615•Physical Review Letters•Sep 28, 2016•57 citations

Amplification and Detection of Single Itinerant Microwave Photons

Lukas Danner, M. Hofheinz, Nicolas Bourlet +3 more

Single-photon detectors are an essential part of the toolbox of modern quantum optics for implementing quantum technologies and enabling tests of fundamental physics. The low energy of microwave photons, the natural signal path for superconducting quantum devices, makes their detection much harder than for visible light. Despite impressive progress in recent years and the proposal and realization of a number of different detector architectures, the reliable detection of a single itinerant microwave photon remains an open topic. Here, we investigate and simulate a detailed protocol for single-photon multiplication and subsequent amplification and detection. At its heart lies a Josephson-photonics device which uses inelastic Cooper-pair tunneling driven by a dc bias in combination with the energy of an incoming photon to create multiple photons, thus compensating for the low-energy problem. Our analysis provides clear design guidelines for utilizing such devices, which have previously been operated in an amplifier mode with a continuous wave input, for counting photons. Combining a formalism recently developed by Mølmer to describe the full quantum state of in- and outgoing photon pulses with stochastic Schrödinger equations, we can describe the full multiplication and detection protocol and calculate performance parameters, such as detection probabilities and dark count rates. With optimized parameters, a high population of a single output mode can be achieved that can then be easily distinguished from vacuum noise in heterodyne measurements of quadratures with a conventional linear amplifier. Realistic devices with two multiplication stages with multiplication of $16$ reach for an impinging Gaussian pulse of length $T$ a detection probability of $84.5\%$ with a dark count rate of $10^{-3}/T$, and promise to outperform competing schemes.

arXiv:2510.08030•Oct 9, 2025•1 citation
Single-photon detection played an important role in the development of quantum optics. Its implementation in the microwave domain is challenging because the photon energy is five orders of magnitude smaller. In recent years, significant progress has been made in developing single microwave photon detectors (SMPDs) based on superconducting quantum bits or bolometers. In this paper we present a practical SMPD based on the irreversible transfer of an incoming photon to the excited state of a transmon qubit by a four-wave mixing process. This device achieves a detection efficiency \ensuremathη=0.43\ensuremath{\eta}=0.43\ensuremathη=0.43 and an operational dark count rate \ensuremathα=85s\ensuremath−1\ensuremath{\alpha}=85\phantom{\rule{0.2em}{0ex}}{\mathrm{s}}^{\ensuremath{-}1}\ensuremathα=85s\ensuremath−1, mainly due to the out-of-equilibrium microwave photons in the input line. The corresponding power sensitivity is S=10\ensuremath−22W/Hz\mathcal{S}={10}^{\ensuremath{-}22}\phantom{\rule{0.2em}{0ex}}\mathrm{W}/\sqrt{\mathrm{Hz}}S=10\ensuremath−22W/Hz​, one order of magnitude lower than the state of the art. The detector operates continuously over hour time-scales with a duty cycle \ensuremathηD=0.84{\ensuremath{\eta}}_{D}=0.84\ensuremathηD​=0.84, and offers frequency tunability of at least 50 MHz around 7 GHz.
Cyclically operated Single Microwave Photon Counter with 10−2210^\mathrm{-22}10−22 W/Hz\mathrm{W/\sqrt{Hz}}W/Hz​ sensitivity
Single photon detection played an important role in the development of quantum optics. Its implementation in the microwave domain is challenging because the photon energy is 5 orders of magnitude smaller. In recent years, significant progress has been made in developing single microwave photon detectors (SMPDs) based on superconducting quantum bits or bolometers. In this paper we present a practical SMPD based on the irreversible transfer of an incoming photon to the excited state of a transmon qubit by a four-wave mixing process. This device achieves a detection efficiency η=0.43η= 0.43η=0.43 and an operational dark count rate α=85α= 85α=85 s−1\mathrm{s^{-1}}s−1, mainly due to the out-of-equilibrium microwave photons in the input line. The corresponding power sensitivity is S=10−22\mathcal{S} = 10^{-22}S=10−22 W/Hz\mathrm{W/\sqrt{Hz}}W/Hz​, one order of magnitude lower than the state of the art. The detector operates continuously over hour timescales with a duty cycle ηD=0.84η_\mathrm{D}=0.84ηD​=0.84, and offers frequency tunability of at least 50 MHz around 7 GHz.
Single-photon detection in the microwave domain has recently emerged as a powerful tool for quantum sensing, offering a path beyond the standard quantum limit of linear amplification since their sensitivity is set by their dark-count rate rather than by the vacuum fluctuations of the detected field. Superconducting qubit-based single microwave photon detectors (SMPDs) encode the absorption of itinerant photons into discrete quantum states via engineered, non-destructive interactions. A previously demonstrated implementation based on four-wave mixing achieved high efficiency, but remained limited by residual qubit excitation and thermal noise at the detector input. Here, we propose and demonstrate a new SMPD that relies on two cascaded four-wave mixing processes. The information on photon detection is encoded on two spatially separated qubits, which mitigates noise due to uncorrelated qubit errors. Furthermore, increasing the detection frequency up to 11.7 GHz reduces input thermal noise. These combined advances lead to a record-low power sensitivity of 2.4⋅10−23W/Hz2.4 \cdot 10^{-23}\mathrm{W}/\sqrt{\mathrm{Hz}}2.4⋅10−23W/Hz​ over a bandwidth of 230 kHz230\ \mathrm{kHz}230 kHz.
Efficient detection of single microwave photons is a key capability for emerging quantum technologies. Yet, it remains far less developed than its optical domain counterpart. Realizing detectors that simultaneously achieve high efficiency, low dark counts, and continuous operation has proved challenging. Existing detectors operate cyclically, forcing a trade-off between efficiency and duty cycle. Here, we demonstrate a continuously operated microwave single-photon detector based on a superconducting artificial molecule. In our scheme, an incoming photon is captured by a bright state of the molecule and then transferred to a long-lived dark state via a driven-dissipative process. Photon ``clicks'' are revealed as quantum jumps in the continuously monitored dark state. We observe a cyclic detection efficiency of 0.730.730.73, and a continuous detection efficiency of 0.470.470.47 over a 5 MHz5\,\mathrm{MHz}5MHz instantaneous bandwidth, with a 1 μs1\,μ\mathrm{s}1μs temporal resolution and a 15 μs15\,μ\mathrm{s}15μs dead time. By overcoming the trade-off between efficiency and duty cycle, this approach establishes continuous microwave photon detection for quantum sensing, quantum thermodynamics, and fundamental physics.
We report on the characteristics of a microwave photon-counter device based on a superconducting transmon qubit. Its design is similar to that described by Balembois [], which achieved a sensitivity of 10 − 22 W / Hz , but with an additional bandwidth-tuning circuit that permits tuning the detection bandwidth over an order of magnitude to optimize the efficiency and noise level of the device. As a result of this feature and improvements in device fabrication, a power sensitivity of 3 × 10 − 23 W / Hz is reached. We confirm the high performance of the device by measuring single-spin microwave fluorescence.
We propose a microwave frequency single-photon transistor which can operate under continuous wave probing and represents an efficient single microwave photon detector. It can be realized using an impedance matched system of a three level artificial ladder-type atom coupled to two microwave cavities connected to input-output waveguides. Using a classical drive on the upper transition, we find parameter space where a single photon control pulse incident on one of the cavities can be fully absorbed into hybridized excited states. This subsequently leads to series of quantum jumps in the upper manifold and the appearance of a photon flux leaving the second cavity through a separate input-output port. The proposal does not require time variation of the probe signals, thus corresponding to a passive version of a single-photon transistor. The resulting device is robust to qubit dephasing processes, possesses low dark count rate for large anharmonicity, and can be readily implemented using current technology.
Single-photon detectors are an essential part of the toolbox of modern quantum optics for implementing quantum technologies and enabling tests of fundamental physics. The low energy of microwave photons, the natural signal path for superconducting quantum devices, makes their detection much harder than for visible light. Despite impressive progress in recent years and the proposal and realization of a number of different detector architectures, the reliable detection of a single itinerant microwave photon remains an open topic. Here, we investigate and simulate a detailed protocol for single-photon multiplication and subsequent amplification and detection. At its heart lies a Josephson-photonics device which uses inelastic Cooper-pair tunneling driven by a dc bias in combination with the energy of an incoming photon to create multiple photons, thus compensating for the low-energy problem. Our analysis provides clear design guidelines for utilizing such devices, which have previously been operated in an amplifier mode with a continuous wave input, for counting photons. Combining a formalism recently developed by Mølmer to describe the full quantum state of in- and outgoing photon pulses with stochastic Schrödinger equations, we can describe the full multiplication and detection protocol and calculate performance parameters, such as detection probabilities and dark count rates. With optimized parameters, a high population of a single output mode can be achieved that can then be easily distinguished from vacuum noise in heterodyne measurements of quadratures with a conventional linear amplifier. Realistic devices with two multiplication stages with multiplication of 161616 reach for an impinging Gaussian pulse of length TTT a detection probability of 84.5%84.5\%84.5% with a dark count rate of 10−3/T10^{-3}/T10−3/T, and promise to outperform competing schemes.