Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.08030

Amplification and Detection of Single Itinerant Microwave Photons

Lukas Danner, M. Hofheinz, Nicolas Bourlet, Ciprian Padurariu, Joachim Ankerhold, Björn Kubala

Published Oct 9, 2025• 1 citation
arXivHTMLPDF

Abstract

Single-photon detectors are an essential part of the toolbox of modern quantum optics for implementing quantum technologies and enabling tests of fundamental physics. The low energy of microwave photons, the natural signal path for superconducting quantum devices, makes their detection much harder than for visible light. Despite impressive progress in recent years and the proposal and realization of a number of different detector architectures, the reliable detection of a single itinerant microwave photon remains an open topic. Here, we investigate and simulate a detailed protocol for single-photon multiplication and subsequent amplification and detection. At its heart lies a Josephson-photonics device which uses inelastic Cooper-pair tunneling driven by a dc bias in combination with the energy of an incoming photon to create multiple photons, thus compensating for the low-energy problem. Our analysis provides clear design guidelines for utilizing such devices, which have previously been operated in an amplifier mode with a continuous wave input, for counting photons. Combining a formalism recently developed by Mølmer to describe the full quantum state of in- and outgoing photon pulses with stochastic Schrödinger equations, we can describe the full multiplication and detection protocol and calculate performance parameters, such as detection probabilities and dark count rates. With optimized parameters, a high population of a single output mode can be achieved that can then be easily distinguished from vacuum noise in heterodyne measurements of quadratures with a conventional linear amplifier. Realistic devices with two multiplication stages with multiplication of $16$ reach for an impinging Gaussian pulse of length $T$ a detection probability of $84.5\%$ with a dark count rate of $10^{-3}/T$, and promise to outperform competing schemes.

DOI
10.48550/arxiv.2510.08030

Related papers

Josephson-photonics devices as stable sources and detectors for microwave photons

Lukas Danner

At its heart, a Josephson-photonics device combines macroscopic superconducting electronics and microscopic quantum optics. It consists of a dc-voltage biased Josephson junction that is connected in series to one or a few microwave cavities. Cooper pairs can tunnel incoherently across the junction by depositing their energy 2eVdc in the microwave cavities, creating photonic excitations in them. Many parameters, such as the eigenfrequencies ∝ (LC)^(−1/2) or zero-point fluctuations ∝ (L/C)^(1/4) of the microwave cavities, can be experimentally designed; other parameters, such as the strength of the Josephson nonlinearity and the dc voltage are easily modified in situ. In this way, Josephson-photonics devices constitute a versatile source of microwave photons with a wide variety of features extending from the classical to the deep quantum regime. To make them of use for quantum technological applications that rely on a well-defined phase of the microwave light, a crucial drawback must be overcome. The dc voltage does not provide a stable reference phase to Josephson-photonics devices, as it is subject to experimental noise, such that all phase information is lost. In this thesis, we develop the field of Josephson photonics in two directions: As first main result, we resolve the issue of phase instability in Josephson photonics. The phase can be stabilized either by injection locking to a small external signal with a stable and well-defined reference phase or by mutual synchronization to a second device. An alternative approach mitigates the issue for some use cases by optimizing an ansatz to reconstruct the undiffused stationary quantum state from experiments with phase diffusion. Secondly, we show how Josephson-photonics devices can be used for the challenging task of reliably detecting single itinerant microwave photons. The “Inelastic Cooper Pair Tunneling Photon Multiplier” exploits a resonance condition, where the energy provided by the dc voltage enables a multiplication process from one incoming to n outgoing photons. This process can be staged to reach a large number of outgoing photons. Here, we model itinerant Gaussian single-photon pulses of length T with Mølmer’s approach. Further, we define a detection scheme based on heterodyne quadrature measurement of the output signal. Most importantly, we show that realistic devices can achieve a detection efficiency of 84.5% with a small dark-count rate of 10^(−3)/T, promising to outperform competing schemes.

•Jan 1, 2025•0 citations

Stroboscopic detection of itinerant microwave photons

Hanna Zeller, Lukas Danner, Max Hofheinz +3 more

We present a novel scheme to detect itinerant microwave radiation at the single photon level. Using existing Josephson-photonics devices, where two microwave cavities are coupled by a dc-voltage biased superconducting junction, we theoretically show how to implement a stroboscopically repeated, near-projective measurement of a photon impinging on one of the cavities. Optimizing rate, duration, and strength of the measurement by flux control of the junction and developing a threshold protocol to detect the photon from a homodyne measurement of the radiation output of the other cavity, we achieve highly efficient detection with low dark counts. By cascading the detector with a preamplifier, where a similar two-cavity Josephson-photonics device acts as a photon multiplier, we can further improve the device to reach a detection efficiency of $88.5 \%$ with a dark count rate of $\sim10^{-4} γ_a$, set by the resonance width $γ_a$ of the absorbing cavity. These results for a multiplication factor of two suggest that near-unity efficiencies may be reached for higher multiplication factors.

quant-pharXiv:2603.16522•Physical Review Research•Mar 18, 2026•1 citation

Multiplying and detecting propagating microwave photons using inelastic Cooper-pair tunneling

Juha Leppäkangas, Michael Marthaler, Dibyendu Hazra +5 more

The interaction between propagating microwave fields and Cooper-pair tunneling across a DC-voltage-biased Josephson junction can be highly nonlinear. We show theoretically that this nonlinearity can be used to convert an incoming single microwave photon into an outgoing $n$-photon Fock state in a different mode. In this process, the electrostatic energy released in a Cooper-pair tunneling event is transferred to the outgoing Fock state, providing energy gain. The created multiphoton Fock state is frequency entangled and highly bunched. The conversion can be made reflectionless (impedance matched) so that all incoming photons are converted to $n$-photon states. With realistic parameters, multiplication ratios $n>2$ can be reached. By two consecutive multiplications, the outgoing Fock-state number can get sufficiently large to accurately discriminate it from vacuum with linear postamplification and power measurement. Therefore, this amplification scheme can be used as a single-photon detector without dead time.

arXiv:1612.07098•Physical Review A•Jan 31, 2018•32 citations

Noise Mitigation in Single Microwave Photon Counting by Cascaded Quantum Measurements

Alexandre S. May, Leo Sutevski, Jeanne Solard +8 more

Single-photon detection in the microwave domain has recently emerged as a powerful tool for quantum sensing, offering a path beyond the standard quantum limit of linear amplification since their sensitivity is set by their dark-count rate rather than by the vacuum fluctuations of the detected field. Superconducting qubit-based single microwave photon detectors (SMPDs) encode the absorption of itinerant photons into discrete quantum states via engineered, non-destructive interactions. A previously demonstrated implementation based on four-wave mixing achieved high efficiency, but remained limited by residual qubit excitation and thermal noise at the detector input. Here, we propose and demonstrate a new SMPD that relies on two cascaded four-wave mixing processes. The information on photon detection is encoded on two spatially separated qubits, which mitigates noise due to uncorrelated qubit errors. Furthermore, increasing the detection frequency up to 11.7 GHz reduces input thermal noise. These combined advances lead to a record-low power sensitivity of $2.4 \cdot 10^{-23}\mathrm{W}/\sqrt{\mathrm{Hz}}$ over a bandwidth of $230\ \mathrm{kHz}$.

quant-pharXiv:2502.14804•Feb 21, 2025•7 citations

Microwave Photon-Number Amplification

Romain Albert, J. Griesmar, Florian Blanchet +3 more

We experimentally demonstrate a microwave photon-multiplication scheme which combines the advantages of a single-photon detector and a power meter by multiplying the incoming photon number by an integer factor. Our first experimental implementation achieves an n = 3 -fold multiplication with 0.69 efficiency in a 116 MHz bandwidth up to an input photon rate of 400 MHz. It loses phase information but does not require any dead time or time binning. We expect an optimized device cascading such multipliers to achieve number-resolving measurement of itinerant photons with low dark count, which would offer new possibilities in a wide range of quantum-sensing and quantum-computing applications. Published by the American Physical Society 2024

arXiv:2303.03173•Physical Review X•Feb 5, 2024•15 citations

Perspectives for Single Microwave Photon Detection

S. Pagano

The detection of single microwave photons is becoming a cornerstone of fundamental experiments in circuit quantum electrodynamics and quantum sensing. Experiments in cavity quantum electrodynamics, photon-mediated entanglement, dark-matter axion searches and quantum thermodynamics increasingly rely on single-photon sensitivity. Current technologies exploit superconducting devices, including Josephson parametric detectors, and transmon-based non-demolition counters for dark-matter haloscopes. Hybrid double quantum dot-Josephson systems reach interesting levels of efficiency, while current-biased Josephson junctions show potential for near-quantumlimited resolution. Despite impressive progress, challenges remain in reducing dark counts, improving reset speed, and scaling for multiplexed arrays. Continued advances in superconducting materials, qubit coherence, and hybrid semiconductor-superconductor designs promise to extend detection efficiency and bandwidth. These developments are poised to enable the next generation of quantum-enabled experiments, from foundational tests in quantum optics to searches for new physics.

Photonics & Electromagnetics Research Symposium - Fall (PIERS-Fall)•Nov 4, 2025•0 citations
Single-photon detectors are an essential part of the toolbox of modern quantum optics for implementing quantum technologies and enabling tests of fundamental physics. The low energy of microwave photons, the natural signal path for superconducting quantum devices, makes their detection much harder than for visible light. Despite impressive progress in recent years and the proposal and realization of a number of different detector architectures, the reliable detection of a single itinerant microwave photon remains an open topic. Here, we investigate and simulate a detailed protocol for single-photon multiplication and subsequent amplification and detection. At its heart lies a Josephson-photonics device which uses inelastic Cooper-pair tunneling driven by a dc bias in combination with the energy of an incoming photon to create multiple photons, thus compensating for the low-energy problem. Our analysis provides clear design guidelines for utilizing such devices, which have previously been operated in an amplifier mode with a continuous wave input, for counting photons. Combining a formalism recently developed by Mølmer to describe the full quantum state of in- and outgoing photon pulses with stochastic Schrödinger equations, we can describe the full multiplication and detection protocol and calculate performance parameters, such as detection probabilities and dark count rates. With optimized parameters, a high population of a single output mode can be achieved that can then be easily distinguished from vacuum noise in heterodyne measurements of quadratures with a conventional linear amplifier. Realistic devices with two multiplication stages with multiplication of 161616 reach for an impinging Gaussian pulse of length TTT a detection probability of 84.5%84.5\%84.5% with a dark count rate of 10−3/T10^{-3}/T10−3/T, and promise to outperform competing schemes.
At its heart, a Josephson-photonics device combines macroscopic superconducting electronics and microscopic quantum optics. It consists of a dc-voltage biased Josephson junction that is connected in series to one or a few microwave cavities. Cooper pairs can tunnel incoherently across the junction by depositing their energy 2eVdc in the microwave cavities, creating photonic excitations in them. Many parameters, such as the eigenfrequencies ∝ (LC)^(−1/2) or zero-point fluctuations ∝ (L/C)^(1/4) of the microwave cavities, can be experimentally designed; other parameters, such as the strength of the Josephson nonlinearity and the dc voltage are easily modified in situ. In this way, Josephson-photonics devices constitute a versatile source of microwave photons with a wide variety of features extending from the classical to the deep quantum regime. To make them of use for quantum technological applications that rely on a well-defined phase of the microwave light, a crucial drawback must be overcome. The dc voltage does not provide a stable reference phase to Josephson-photonics devices, as it is subject to experimental noise, such that all phase information is lost. In this thesis, we develop the field of Josephson photonics in two directions: As first main result, we resolve the issue of phase instability in Josephson photonics. The phase can be stabilized either by injection locking to a small external signal with a stable and well-defined reference phase or by mutual synchronization to a second device. An alternative approach mitigates the issue for some use cases by optimizing an ansatz to reconstruct the undiffused stationary quantum state from experiments with phase diffusion. Secondly, we show how Josephson-photonics devices can be used for the challenging task of reliably detecting single itinerant microwave photons. The “Inelastic Cooper Pair Tunneling Photon Multiplier” exploits a resonance condition, where the energy provided by the dc voltage enables a multiplication process from one incoming to n outgoing photons. This process can be staged to reach a large number of outgoing photons. Here, we model itinerant Gaussian single-photon pulses of length T with Mølmer’s approach. Further, we define a detection scheme based on heterodyne quadrature measurement of the output signal. Most importantly, we show that realistic devices can achieve a detection efficiency of 84.5% with a small dark-count rate of 10^(−3)/T, promising to outperform competing schemes.
We present a novel scheme to detect itinerant microwave radiation at the single photon level. Using existing Josephson-photonics devices, where two microwave cavities are coupled by a dc-voltage biased superconducting junction, we theoretically show how to implement a stroboscopically repeated, near-projective measurement of a photon impinging on one of the cavities. Optimizing rate, duration, and strength of the measurement by flux control of the junction and developing a threshold protocol to detect the photon from a homodyne measurement of the radiation output of the other cavity, we achieve highly efficient detection with low dark counts. By cascading the detector with a preamplifier, where a similar two-cavity Josephson-photonics device acts as a photon multiplier, we can further improve the device to reach a detection efficiency of 88.5%88.5 \%88.5% with a dark count rate of ∼10−4γa\sim10^{-4} γ_a∼10−4γa​, set by the resonance width γaγ_aγa​ of the absorbing cavity. These results for a multiplication factor of two suggest that near-unity efficiencies may be reached for higher multiplication factors.
The interaction between propagating microwave fields and Cooper-pair tunneling across a DC-voltage-biased Josephson junction can be highly nonlinear. We show theoretically that this nonlinearity can be used to convert an incoming single microwave photon into an outgoing nnn-photon Fock state in a different mode. In this process, the electrostatic energy released in a Cooper-pair tunneling event is transferred to the outgoing Fock state, providing energy gain. The created multiphoton Fock state is frequency entangled and highly bunched. The conversion can be made reflectionless (impedance matched) so that all incoming photons are converted to nnn-photon states. With realistic parameters, multiplication ratios n>2n>2n>2 can be reached. By two consecutive multiplications, the outgoing Fock-state number can get sufficiently large to accurately discriminate it from vacuum with linear postamplification and power measurement. Therefore, this amplification scheme can be used as a single-photon detector without dead time.
Single-photon detection in the microwave domain has recently emerged as a powerful tool for quantum sensing, offering a path beyond the standard quantum limit of linear amplification since their sensitivity is set by their dark-count rate rather than by the vacuum fluctuations of the detected field. Superconducting qubit-based single microwave photon detectors (SMPDs) encode the absorption of itinerant photons into discrete quantum states via engineered, non-destructive interactions. A previously demonstrated implementation based on four-wave mixing achieved high efficiency, but remained limited by residual qubit excitation and thermal noise at the detector input. Here, we propose and demonstrate a new SMPD that relies on two cascaded four-wave mixing processes. The information on photon detection is encoded on two spatially separated qubits, which mitigates noise due to uncorrelated qubit errors. Furthermore, increasing the detection frequency up to 11.7 GHz reduces input thermal noise. These combined advances lead to a record-low power sensitivity of 2.4⋅10−23W/Hz2.4 \cdot 10^{-23}\mathrm{W}/\sqrt{\mathrm{Hz}}2.4⋅10−23W/Hz​ over a bandwidth of 230 kHz230\ \mathrm{kHz}230 kHz.
We experimentally demonstrate a microwave photon-multiplication scheme which combines the advantages of a single-photon detector and a power meter by multiplying the incoming photon number by an integer factor. Our first experimental implementation achieves an n = 3 -fold multiplication with 0.69 efficiency in a 116 MHz bandwidth up to an input photon rate of 400 MHz. It loses phase information but does not require any dead time or time binning. We expect an optimized device cascading such multipliers to achieve number-resolving measurement of itinerant photons with low dark count, which would offer new possibilities in a wide range of quantum-sensing and quantum-computing applications. Published by the American Physical Society 2024
The detection of single microwave photons is becoming a cornerstone of fundamental experiments in circuit quantum electrodynamics and quantum sensing. Experiments in cavity quantum electrodynamics, photon-mediated entanglement, dark-matter axion searches and quantum thermodynamics increasingly rely on single-photon sensitivity. Current technologies exploit superconducting devices, including Josephson parametric detectors, and transmon-based non-demolition counters for dark-matter haloscopes. Hybrid double quantum dot-Josephson systems reach interesting levels of efficiency, while current-biased Josephson junctions show potential for near-quantumlimited resolution. Despite impressive progress, challenges remain in reducing dark counts, improving reset speed, and scaling for multiplexed arrays. Continued advances in superconducting materials, qubit coherence, and hybrid semiconductor-superconductor designs promise to extend detection efficiency and bandwidth. These developments are poised to enable the next generation of quantum-enabled experiments, from foundational tests in quantum optics to searches for new physics.