As an imperative division of the Internet of Things (IoT), Industrial IoT (IIoT) has also attracted full attention. IIoT networks are equipped with various authenticated key exchange techniques under the cumbersome Diffie–Hellman (DH) problems and certificate management overheads. However, DH-type problems are vulnerable to quantum cryptanalysis. In this article, a novel identity-based authenticated key exchange protocol is designed using the concept of lattice cryptography, which enables the different security features in the IIoT in open wireless communication. Due to the lattice hard assumptions, the proposed protocol can withstand a quantum attack. Rigorous formal security analysis has been made, which shows the ability of the proposed protocol to resist existing as well as quantum attacks. Performance results demonstrate that the proposed protocol exhibits better communication, energy consumption, cryptographic key storage, and computation costs than other similar state of the arts.
As an imperative division of the Internet of Things (IoT), Industrial IoT (IIoT) has also attracted full attention. IIoT networks are equipped with various authenticated key exchange techniques under the cumbersome Diffie–Hellman (DH) problems and certificate management overheads. However, DH-type problems are vulnerable to quantum cryptanalysis. In this article, a novel identity-based authenticated key exchange protocol is designed using the concept of lattice cryptography, which enables the different security features in the IIoT in open wireless communication. Due to the lattice hard assumptions, the proposed protocol can withstand a quantum attack. Rigorous formal security analysis has been made, which shows the ability of the proposed protocol to resist existing as well as quantum attacks. Performance results demonstrate that the proposed protocol exhibits better communication, energy consumption, cryptographic key storage, and computation costs than other similar state of the arts.
The proliferation of Industrial Internet of Things (IIoT) devices, coupled with their computational constraints, has necessitated robust authenticated key exchange mechanisms to secure communications. To address this issue, Gupta recently introduced a lattice-based lightweight authenticated key exchange protocol, PiLike, in the IEEE Systems Journal. Despite rigorous security proofs being provided, our cryptanalysis unveils a critical vulnerability in their scheme which may cause impersonation attacks. Specifically, in the private key extraction phase, an adversary can leverage secret information obtained during registration to impersonate legitimate users, successfully negotiating session keys while evading detection. In addition to the theoretical analysis, a corresponding concrete experiment was also conducted, showing that the adversary has a 100% success rate in breaking the required security claimed in PiLike. Our findings underscore the urgency to address PiLike's vulnerabilities, ensuring its reliability in safeguarding IIoT communications against conventional and quantum threats.
The emergence of Industry 4.0 emphasizes automation, interconnectivity, and data-driven intelligence across industrial infrastructures, with the Industrial Internet of Things (IIoT) serving as a critical enabler. However, the proliferation of connected smart devices and the advent of quantum computing pose significant challenges to security and authentication mechanisms in such environments. To address these challenges, this paper proposes a lightweight, lattice-based authentication protocol for post-quantum IIoT environments. The proposed protocol enables secure mutual authentication and session key establishment between IIoT sensing devices and the gateway node. It integrates Physical Unclonable Functions (PUFs) to provide hardware-level device trust, eliminates the need to store long-term cryptographic keys in device memory, and uses one-time challenge-response pairs to prevent CRP reuse. The security of the proposed protocol is based on the hardness of the Ring LearningWith Errors (RLWE) problem, ensuring resistance against quantum adversaries. The protocol is formally validated under the Real-Or-Random (ROR) model and evaluated for its resistance to impersonation, replay, desynchronization, and device forgery attacks. Performance analysis shows that the proposed scheme reduces computational cost by 43.11% and communication overhead by 12.67% compared to existing lattice-based authentication protocols. These results confirm its suitability as an efficient and quantum-resilient authentication solution for future Industry 4.0-driven IIoT systems.
The rapid expansion of Internet of Things (IoT) ecosystems has introduced significant security challenges due to resource-constrained devices, heterogeneous network architectures, and largescale connectivity. Traditional authentication and key exchange mechanisms, primarily based on classical cryptographic algorithms such as RSA and ECC, are vulnerable to future quantum computing attacks. The emergence of quantum algorithms, particularly Shor’s algorithm, threatens the long-term confidentiality and integrity of IoT communications. This paper proposes a Quantum-Resistant Authentication and Key Exchange Protocol specifically designed for secure IoT architectures. The proposed framework integrates post-quantum cryptographic primitives, including lattice-based key exchange mechanisms and hash-based authentication schemes, optimized for low computational overhead suitable for constrained IoT devices. The protocol ensures mutual authentication, forward secrecy, and resistance against quantum adversaries while maintaining minimal communication latency. Security analysis demonstrates robustness against replay, man-in-the-middle, and key-compromise attacks. Performance evaluation shows that the proposed solution achieves a balance between quantum security strength and resource efficiency, making it suitable for next-generation IoT deployments in smart cities, healthcare systems, and industrial automation.
The rapid proliferation of Internet of Things (IoT) devices in smart cities, industrial automation, and healthcare systems has significantly increased the demand for secure and efficient communication mechanisms. However, the emergence of quantum computing poses a serious threat to conventional public-key cryptographic schemes, potentially compromising the confidentiality and authenticity of IoT communications. Existing authentication and key agreement protocols primarily rely on classical cryptographic algorithms, which are vulnerable to quantum attacks and often impose considerable computational and communication overhead on resource-constrained IoT devices. Furthermore, many current solutions fail to provide a balanced trade-off between security strength and energy efficiency in edge-enabled IoT environments. To address these challenges, this paper proposes EdgePQ-Auth, a lightweight lattice-based mutual authentication and key agreement framework designed for quantum-resilient Edge-IoT networks. The proposed framework consists of four modules: Device Registration, Mutual Authentication, Post-Quantum Key Agreement (PQKA), and Secure Data Transmission using Symmetric Encryption. By leveraging lattice-based cryptography for authentication and session key establishment while utilizing lightweight symmetric encryption for subsequent communications, the framework minimizes computational burden on IoT devices and delegates intensive operations to the edge gateway. The proposed scheme ensures resistance against replay, impersonation, man-in-the-middle, and quantum-enabled attacks while maintaining low resource consumption. Experimental evaluation demonstrates that EdgePQ-Auth achieves superior performance in terms of authentication latency, communication overhead, and energy consumption compared with existing PQ IoT security protocols. The results indicate that the proposed framework provides an effective and scalable solution for securing next-generation quantum-resilient Edge-IoT deployments.
The Edge-enabled Industrial Internet of Things (Edge-IIoT) has emerged as a fundamental architecture for intelligent manufacturing by enabling low-latency data collection, processing, and communication among distributed industrial devices. However, the open and distributed nature of Edge-IIoT introduces significant challenges to secure data authentication and privacy preservation. Meanwhile, conventional public key infrastructure incurs considerable certificate management overhead and is not well suited for future industrial environments in the presence of quantum computing. To address these challenges, this paper proposes a lattice-based certificateless blind signature scheme for secure and privacy-preserving authentication in Edge-IIoT. The proposed scheme integrates the Dilithium signature algorithm with certificateless public key cryptography and blind signature techniques to simultaneously provide anonymous authentication, data integrity, conditional identity revocation, and post-quantum security while eliminating the certificate management overhead associated with traditional public key infrastructures. Furthermore, the proposed construction improves existing lattice-based certificateless blind signature schemes by addressing identified security weaknesses and strengthening resistance against forgery attacks, while effectively avoiding the key escrow problem inherent in identity-based cryptography. The correctness, blindness, and unforgeability of the proposed scheme are formally proved in the random oracle model based on the hardness of the Module Short Integer Solution (MSIS) problem. In addition, theoretical performance analysis demonstrates that the proposed scheme incurs acceptable computational, communication, and storage overhead while providing comprehensive security properties, including certificateless operation, identity anonymity, no key escrow, conditional revocation, and post-quantum security. Overall, the proposed scheme achieves an effective balance between security, privacy preservation, and efficiency, which exhibits favorable theoretical security-efficiency trade-offs for secure industrial data authentication in resource-constrained Edge-IIoT environments. Practical implementation is left for future investigation.
The Industrial Internet of Things (IIoT) enables smart manufacturing through advanced sensing, monitoring, and control capabilities. However, securing these resource-constrained IIoT devices poses critical challenges due to limited memory and energy resources, while the emergence of quantum computing threatens existing security mechanisms. This study addresses the urgent need for practical quantum-resistant security solutions for deployment in resource-limited industrial environments. It presents QLight-IIoT, a quantum-resistant authentication and key agreement (AKA) scheme established solely on hash-based hardness assumption, demonstrating that lightweight quantum-resistant authentication is achievable without relying on computationally intensive primitives like lattices or codes. The proposed scheme is deployed and tested over Raspberry Pi 4 to demonstrate its practicality in real-world IIoT environments. Experimental validation shows that the scheme ensures mutual authentication with session key establishment with an average key generation time of 0.3200 seconds. The security of the proposed QLight-IIoT scheme is systematically evaluated using the Real-or-Random (ROR) model, the Scyther tool, and the Automated Validation of Internet Security Protocols and Applications (AVISPA) framework. Performance evaluation reveals significant efficiency improvements, achieving 9.29–77.36% reduction in communication cost and 4.41–95.37% reduction in Computational overhead relative to existing schemes. The scheme requires minimal storage of 632 bits per IIoT device, resulting in up to 64.84% reduction in total system storage cost. Comparative security analysis further validates the scheme’s security against various attack vectors. This work provides a practical pathway for industrial organizations to prepare IIoT infrastructure for quantum-resistant security challenges while maintaining compatibility with current resource-constrained hardware.