Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Oxford University Press eBooks

The renormalization group

Julia M. Yeomans

Published May 7, 1992• 0 citations
Publisher

Abstract

Abstract The approaches described so far in this book have given a broad phenomenological understanding of critical phenomena. However, although a substantial framework of results and connections has been built up, we have, as yet, no explanations for the following: What is needed is a theory, based on the physics of what is happening at the critical point. we argued in Chapter 1 that the special feature of criticality is that the correlation length is infinite and that the critical system is invariant on all length scales. The aim is to write down a (hopefully short, elegant, and comprehensible) mathematical theory which embodies this physics and explains all the observations listed above. A useful theory will also allow the calculation of critical exponents and transition temperatures, if not exactly, then within an accurate and well-controlled approximation scheme.

DOI
10.1093/oso/9780198517290.003.0008

Related papers

The Theory of Critical Phenomena: An Introduction to the Renormalization Group

James Jeffrey Binney, N J Dowrick, Andrew J. Fisher +1 more

Abstract The successful calculation of critical exponents for continuous phase transitions is one of the main achievements of theoretical physics over the last quarter-century. This was achieved through the use of scaling and field-theoretic techniques which have since become standard equipment in many areas of physics, especially quantum field theory. This book provides a thorough introduction to these techniques. Continuous phase transitions are introduced, then the necessary statistical mechanics is summarized, followed by standard models, some exact solutions and techniques for numerical simulations. The real-space renormalization group and mean-field theory are then explained and illustrated. The final chapters cover the Landau-Ginzburg model, from physical motivation, through diagrammatic perturbation theory and renormalization to the renormalization group and the calculation of critical exponents above and below the critical temperature.

Oxford University Press eBooks•Jun 11, 1992•1,577 citations

Phase Transitions and Renormalization Group

Jean Zinn‐Justin

This book provides an elementary introduction to the notions of continuum limit and universality in statistical systems with a large number of degrees of freedom. The existence of a continuum limit requires the appearance of correlations at large distance, a situation that is encountered in second order phase transitions, near the critical temperature. In this context, the book emphasizes the role of gaussian distributions and their relations with the mean field approximation and Landau′s theory of critical phenomena. The book shows that quasi-gaussian or mean-field approximations cannot describe correctly phase transitions in three space dimensions. The book assigns this difficulty to the coupling of very different physical length scales, even though the systems we will consider have only local, that is, short range, interactions. To analyze the unusual situation, a new concept is required: the renormalization group, whose fixed points allow understanding the universality of physical properties at large distance, beyond mean-field theory. In the continuum limit, critical phenomena can be described by quantum field theories. In this framework, the renormalization group is directly related to the renormalization process; that is, the necessity to cancel the infinities that arise in straightforward formulations of the theory. The book discusses the renormalization group in the context of various relevant field theories. This leads to proofs of universality and to efficient tools for calculating universal quantities in a perturbative framework. Finally, the book constructs a general functional renormalization group, which can be used when perturbative methods are inadequate.

Oxford University Press eBooks•Jul 5, 2007•223 citations

Critical Phenomena II: The Renormalization Group

In this chapter we introduce the renormalization group approach to critical phenomena. In contrast to Chapter 5, we do not proceed historically, but begin in Section 6.1 with a renormalization treatment of a simple exactly solvable model, the familiar Ising chain (Section 3.6). We proceed in Section 6.2 to discuss properties of fixed points, the relation to scaling, and the notion of universality. Section 6.3 continues with the cumulant approximation in the context of the position space renormalization group, and the critical exponents are calculated approximately, but in a nontrivial fashion, for a two-dimensional model. In Section 6.4 we describe the application of other position space renormalization methods to phase transitions . The “phenomenological renormalization group”, based on the finite-size scaling ideas introduced in Section 5.4, is the subject of Section 6.5. We conclude this chapter with Section 6.6 in which the momentum space approach and the ɛ expansion are developed.

WORLD SCIENTIFIC eBooks•Dec 1, 1994•0 citations

Renormalization group and scaling

Hidetoshi Nishimori, Gerardo Ortíz

Abstract Mean-field theory is usually taken as a first step toward understanding critical phenomena, providing an overview that reveals qualitative behaviour of physical quantities. However, it is necessary to proceed beyond the mean-field theory to better understand the situation, both qualitatively and quantitatively, when fluctuations play vital roles leading to exponents that cannot be explained by dimensional analysis, thus introducing anomalous dimensions. The present chapter explains the basic concepts of the renormalization group and scaling theory, which allow us to analyze critical phenomena with fluctuations systematically taken into account. The essential step in a renormalization group calculation consists of establishing recursion relations between the parameters defining the Hamiltonian of the system. These recursion or renormalization group equations define a flow with well-defined fixed points. Details other than the values of the relevant operators have no influence on the critical exponents and this represents universality.

Oxford University Press eBooks•Dec 2, 2010•0 citations

Critical Phenomena: Universality, Scaling, and Renormalization Group

Biman Bagchi

Overview As discussed in Chapter 16 , when we approach the critical temperature of a phase coexistence line, several fascinating things start to happen which together have come to be known as “critical phenomena.” It is observed that the spatial correlation between relevant order parameters like density, magnetization, etc. becomes infinitely large. This is reflected in the divergence of inverse susceptibility of the respective order parameters. Landau’s theory explains this in terms of the flattening of the free energy surface but fails to unravel many of the other mysteries of critical phenomena that have kept scientists engaged now for about a century. Critical phenomena are characterized by certain singular properties, like the universality of the critical exponents. Several aspects of the critical phenomena are discussed in this chapter with an aim to maintain continuity with earlier chapters. A simple theory (like that of Landau) cannot explain many of the observed features and this problem remained unsolved for a long time until K. G. Wilson could develop a sophisticated theory that explained almost everything. At the core of Wilson’s method is the renormalization group technique. Physically, this technique employs the expected invariance of the Hamiltonian due to a transformation that removes local interactions and replaces them by effective longer range interactions. Because of the existence of long range correlations, the transformation is expected to converge to a fixed point. The procedure is quite mathematical and is the only robust method to obtain the critical exponents. Here we discuss the method briefly, as an introduction to the subject.

CRC Press eBooks•Jul 6, 2018•0 citations

The Renormalization-Group Method

Eldred H. Chimowitz

The renormalization-group (RG) method discussed in this chapter has assumed a pivotal role in the modern theory of critical phenomena. It attempts to relate the partition function of a given system to that of a “similar system” with decreased degrees of freedom through a process referred to as renormalization. Exactly how these degrees of freedom are removed from the system, what we mean by a “similar” system, and how successive systems are coupled to one another are essentially the questions we take up in the introductory treatment given in this chapter. The RG method is a topic with large scope and found widely disseminated in an extensive physics literature on the topic; however, it is seldom found in engineering journals. Our purpose here is to try and make sense of some basic ideas with the RG approach so that it is more accessible to this wider community. For this we often rely upon some prior exposes of the subject in more specialized settings [1, 2, 3, 5]. In its complete sense, the RG method has only been made to work, at least analytically, for a few simple statistical-mechanical models. But aside from these numerical results, many important and quite general insights about critical phenomena can be developed from studying this approach to the problem, especially the central role played by length scale as a factor in describing the phenomenology. These ideas have significantly enhanced our understanding of ideas like scale invariance, universality classes, relevant scaling fields (as opposed to irrelevant ones), Hamiltonian renormalization, and so on; these and related concepts lie at the center of modern discourse on the subject. The essential concepts of the approach can be well illustrated using the Ising system since, with this model, lattice spins are fixed in space, which makes the analytical work quite transparent. This approach, called real space renormalization, is the RG method studied in this chapter.

Oxford University Press eBooks•Jun 23, 2005•0 citations
Abstract The approaches described so far in this book have given a broad phenomenological understanding of critical phenomena. However, although a substantial framework of results and connections has been built up, we have, as yet, no explanations for the following: What is needed is a theory, based on the physics of what is happening at the critical point. we argued in Chapter 1 that the special feature of criticality is that the correlation length is infinite and that the critical system is invariant on all length scales. The aim is to write down a (hopefully short, elegant, and comprehensible) mathematical theory which embodies this physics and explains all the observations listed above. A useful theory will also allow the calculation of critical exponents and transition temperatures, if not exactly, then within an accurate and well-controlled approximation scheme.
Abstract The successful calculation of critical exponents for continuous phase transitions is one of the main achievements of theoretical physics over the last quarter-century. This was achieved through the use of scaling and field-theoretic techniques which have since become standard equipment in many areas of physics, especially quantum field theory. This book provides a thorough introduction to these techniques. Continuous phase transitions are introduced, then the necessary statistical mechanics is summarized, followed by standard models, some exact solutions and techniques for numerical simulations. The real-space renormalization group and mean-field theory are then explained and illustrated. The final chapters cover the Landau-Ginzburg model, from physical motivation, through diagrammatic perturbation theory and renormalization to the renormalization group and the calculation of critical exponents above and below the critical temperature.
This book provides an elementary introduction to the notions of continuum limit and universality in statistical systems with a large number of degrees of freedom. The existence of a continuum limit requires the appearance of correlations at large distance, a situation that is encountered in second order phase transitions, near the critical temperature. In this context, the book emphasizes the role of gaussian distributions and their relations with the mean field approximation and Landau′s theory of critical phenomena. The book shows that quasi-gaussian or mean-field approximations cannot describe correctly phase transitions in three space dimensions. The book assigns this difficulty to the coupling of very different physical length scales, even though the systems we will consider have only local, that is, short range, interactions. To analyze the unusual situation, a new concept is required: the renormalization group, whose fixed points allow understanding the universality of physical properties at large distance, beyond mean-field theory. In the continuum limit, critical phenomena can be described by quantum field theories. In this framework, the renormalization group is directly related to the renormalization process; that is, the necessity to cancel the infinities that arise in straightforward formulations of the theory. The book discusses the renormalization group in the context of various relevant field theories. This leads to proofs of universality and to efficient tools for calculating universal quantities in a perturbative framework. Finally, the book constructs a general functional renormalization group, which can be used when perturbative methods are inadequate.
In this chapter we introduce the renormalization group approach to critical phenomena. In contrast to Chapter 5, we do not proceed historically, but begin in Section 6.1 with a renormalization treatment of a simple exactly solvable model, the familiar Ising chain (Section 3.6). We proceed in Section 6.2 to discuss properties of fixed points, the relation to scaling, and the notion of universality. Section 6.3 continues with the cumulant approximation in the context of the position space renormalization group, and the critical exponents are calculated approximately, but in a nontrivial fashion, for a two-dimensional model. In Section 6.4 we describe the application of other position space renormalization methods to phase transitions . The “phenomenological renormalization group”, based on the finite-size scaling ideas introduced in Section 5.4, is the subject of Section 6.5. We conclude this chapter with Section 6.6 in which the momentum space approach and the ɛ expansion are developed.
Abstract Mean-field theory is usually taken as a first step toward understanding critical phenomena, providing an overview that reveals qualitative behaviour of physical quantities. However, it is necessary to proceed beyond the mean-field theory to better understand the situation, both qualitatively and quantitatively, when fluctuations play vital roles leading to exponents that cannot be explained by dimensional analysis, thus introducing anomalous dimensions. The present chapter explains the basic concepts of the renormalization group and scaling theory, which allow us to analyze critical phenomena with fluctuations systematically taken into account. The essential step in a renormalization group calculation consists of establishing recursion relations between the parameters defining the Hamiltonian of the system. These recursion or renormalization group equations define a flow with well-defined fixed points. Details other than the values of the relevant operators have no influence on the critical exponents and this represents universality.
Overview As discussed in Chapter 16 , when we approach the critical temperature of a phase coexistence line, several fascinating things start to happen which together have come to be known as “critical phenomena.” It is observed that the spatial correlation between relevant order parameters like density, magnetization, etc. becomes infinitely large. This is reflected in the divergence of inverse susceptibility of the respective order parameters. Landau’s theory explains this in terms of the flattening of the free energy surface but fails to unravel many of the other mysteries of critical phenomena that have kept scientists engaged now for about a century. Critical phenomena are characterized by certain singular properties, like the universality of the critical exponents. Several aspects of the critical phenomena are discussed in this chapter with an aim to maintain continuity with earlier chapters. A simple theory (like that of Landau) cannot explain many of the observed features and this problem remained unsolved for a long time until K. G. Wilson could develop a sophisticated theory that explained almost everything. At the core of Wilson’s method is the renormalization group technique. Physically, this technique employs the expected invariance of the Hamiltonian due to a transformation that removes local interactions and replaces them by effective longer range interactions. Because of the existence of long range correlations, the transformation is expected to converge to a fixed point. The procedure is quite mathematical and is the only robust method to obtain the critical exponents. Here we discuss the method briefly, as an introduction to the subject.
The renormalization-group (RG) method discussed in this chapter has assumed a pivotal role in the modern theory of critical phenomena. It attempts to relate the partition function of a given system to that of a “similar system” with decreased degrees of freedom through a process referred to as renormalization. Exactly how these degrees of freedom are removed from the system, what we mean by a “similar” system, and how successive systems are coupled to one another are essentially the questions we take up in the introductory treatment given in this chapter. The RG method is a topic with large scope and found widely disseminated in an extensive physics literature on the topic; however, it is seldom found in engineering journals. Our purpose here is to try and make sense of some basic ideas with the RG approach so that it is more accessible to this wider community. For this we often rely upon some prior exposes of the subject in more specialized settings [1, 2, 3, 5]. In its complete sense, the RG method has only been made to work, at least analytically, for a few simple statistical-mechanical models. But aside from these numerical results, many important and quite general insights about critical phenomena can be developed from studying this approach to the problem, especially the central role played by length scale as a factor in describing the phenomenology. These ideas have significantly enhanced our understanding of ideas like scale invariance, universality classes, relevant scaling fields (as opposed to irrelevant ones), Hamiltonian renormalization, and so on; these and related concepts lie at the center of modern discourse on the subject. The essential concepts of the approach can be well illustrated using the Ising system since, with this model, lattice spins are fixed in space, which makes the analytical work quite transparent. This approach, called real space renormalization, is the RG method studied in this chapter.