The renormalization-group (RG) method discussed in this chapter has assumed a pivotal role in the modern theory of critical phenomena. It attempts to relate the partition function of a given system to that of a “similar system” with decreased degrees of freedom through a process referred to as renormalization. Exactly how these degrees of freedom are removed from the system, what we mean by a “similar” system, and how successive systems are coupled to one another are essentially the questions we take up in the introductory treatment given in this chapter. The RG method is a topic with large scope and found widely disseminated in an extensive physics literature on the topic; however, it is seldom found in engineering journals. Our purpose here is to try and make sense of some basic ideas with the RG approach so that it is more accessible to this wider community. For this we often rely upon some prior exposes of the subject in more specialized settings [1, 2, 3, 5]. In its complete sense, the RG method has only been made to work, at least analytically, for a few simple statistical-mechanical models. But aside from these numerical results, many important and quite general insights about critical phenomena can be developed from studying this approach to the problem, especially the central role played by length scale as a factor in describing the phenomenology. These ideas have significantly enhanced our understanding of ideas like scale invariance, universality classes, relevant scaling fields (as opposed to irrelevant ones), Hamiltonian renormalization, and so on; these and related concepts lie at the center of modern discourse on the subject. The essential concepts of the approach can be well illustrated using the Ising system since, with this model, lattice spins are fixed in space, which makes the analytical work quite transparent. This approach, called real space renormalization, is the RG method studied in this chapter.
The renormalization-group (RG) method discussed in this chapter has assumed a pivotal role in the modern theory of critical phenomena. It attempts to relate the partition function of a given system to that of a “similar system” with decreased degrees of freedom through a process referred to as renormalization. Exactly how these degrees of freedom are removed from the system, what we mean by a “similar” system, and how successive systems are coupled to one another are essentially the questions we take up in the introductory treatment given in this chapter. The RG method is a topic with large scope and found widely disseminated in an extensive physics literature on the topic; however, it is seldom found in engineering journals. Our purpose here is to try and make sense of some basic ideas with the RG approach so that it is more accessible to this wider community. For this we often rely upon some prior exposes of the subject in more specialized settings [1, 2, 3, 5]. In its complete sense, the RG method has only been made to work, at least analytically, for a few simple statistical-mechanical models. But aside from these numerical results, many important and quite general insights about critical phenomena can be developed from studying this approach to the problem, especially the central role played by length scale as a factor in describing the phenomenology. These ideas have significantly enhanced our understanding of ideas like scale invariance, universality classes, relevant scaling fields (as opposed to irrelevant ones), Hamiltonian renormalization, and so on; these and related concepts lie at the center of modern discourse on the subject. The essential concepts of the approach can be well illustrated using the Ising system since, with this model, lattice spins are fixed in space, which makes the analytical work quite transparent. This approach, called real space renormalization, is the RG method studied in this chapter.
Abstract Chapter 8 introduces the key ideas of the renormalization group, including how they provide a theoretical scheme and a proper language to face critical phenomena. It covers the scaling transformations of a system and their implementations in the space of the coupling constants and reducing the degrees of freedom. From this analysis, the reader is led to the important notion of relevant, irrelevant and marginal operators and then to the universality of the critical phenomena. Furthermore, the chapter also covers (as regards the RG) transformation laws, effective Hamiltonians, the Gaussian model, the Ising model, operators of quantum field theory, universal ratios, critical exponents and β-functions.
In this chapter we introduce the renormalization group approach to critical phenomena. In contrast to Chapter 5, we do not proceed historically, but begin in Section 6.1 with a renormalization treatment of a simple exactly solvable model, the familiar Ising chain (Section 3.6). We proceed in Section 6.2 to discuss properties of fixed points, the relation to scaling, and the notion of universality. Section 6.3 continues with the cumulant approximation in the context of the position space renormalization group, and the critical exponents are calculated approximately, but in a nontrivial fashion, for a two-dimensional model. In Section 6.4 we describe the application of other position space renormalization methods to phase transitions . The “phenomenological renormalization group”, based on the finite-size scaling ideas introduced in Section 5.4, is the subject of Section 6.5. We conclude this chapter with Section 6.6 in which the momentum space approach and the ɛ expansion are developed.
These lectures describe the physics of phase transitions and critical phenomena. After introducing the thermodynamics of phase transitions, these general considerations are made explicit by presenting statistical mechanical calculations on a lattice gas model in the mean-field approximation. Then the Landau theory of phase transitions is presented. The form of free energy in the Landau theory is motivated by an explicit mean field calculation for the Ising model. This is followed by a discussion of spatial correlations and the breakdown of the mean field theory due to increase of spatial fluctuations near the critical point. This calculation also brings out the role of dimension of the system for the critical behaviour. The basic ideas of Renormalization Group (RG) are then introduced and illustrated by a simple RG calculation for the one-dimensional Ising model. Real-space RG calculations are then applied to the two-dimensional Ising model on the triangular lattice, which, in fact, brings forth several key features of the RG technique. A discussion of more general aspects of the RG formalism, such as scaling for spatial correlation functions, relevant and irrelevant couplings, universality, upper critical dimension, etc. are introduced.
In this chapter the basic concepts of the modern approach to equilibrium critical behaviour, conventionally grouped under the title ‘renormalization group’, are introduced. This terminology is rather unfortunate. The mathematical structure of the procedure, in the sense that it may be said to have any rigorous underpinnings, is certainly not that of a group. Neither is renormalization in quantum field theory an essential element, although it has an intimate connection with some formulations of the renormalization group. In fact, the renormalization group framework may be applied to problems quite unrelated to field theory. The origins of the name may be traced to the particle physics of the 1960s, when it was optimistically hoped that everything in fundamental physics might be explained in terms of symmetries and group theory, rather than dynamics. One of the earliest applications of renormalization group ideas, in fact, was to the rather esoteric subject of the high energy behaviour of renormalized quantum electrodynamics. It took the vision of K. Wilson to realise that these methods had a far wider field of application in the scaling theory of critical phenomena that was being formulated by Fisher, Kadanoff and others in the latter part of the decade. By then, however, the name had become firmly attached to the subject. Not only are the words ‘renormalization’ and ‘group’ examples of unfortunate terminology, the use of the definite article ‘the’ which usually precedes them is even more confusing.
The real space renormalisation group has a wide application in the study of classical critical phenomena. For quantum systems, several versions of the real space renormalisation group have been proposed (Jullien, 1981; Pfeuty et al., 1982; dos Santos, 1982). The real space RG is the most direct way of implementing the scaling ideas presented in Chapter 1. The operation of elimination of degrees of freedom as the system is reduced to blocks of smaller sizes under a change of length scale is directly and intuitively represented as mathematical equations. In particular, the block method has been used to study different problems of strongly correlated systems (Pfeuty et al., 1982) and spin chains (White, 1992, 1993) with different degrees of sophistication. We show here in detail a simple form of this technique applied to the case of the one-dimensional Ising model in a transverse field. The purpose is to illustrate the ideas introduced earlier in Chapter 1 with a concrete example where a quantum critical point is associated with an unstable fixed point. Also, we show how the stable attractors or fixed points can characterise the different phases and how the critical exponents can be obtained. Although the actual values for the quantum critical point and critical exponents that we obtain using a small block are not exact, a procedure is outlined which can be used to improve these results. In this sense, the block method presented here represents a controlled approximation, which can be systematically improved to yield in the limit of very large blocks essentially the correct results. When compared to the k-space version of the RG (to be presented in the next two chapters), the real space version turns out to be in general more difficult to control, in the sense of producing a systematic improvement of the results. On the other hand, this method yields without much effort the attractive fixed points of the different phases, allowing for their characterisation. This turns out to be useful since the nature of the phase transition, whether first or second order, can be determined by exponents calculated in the attractor of this phase (Nienhuis and Naunberg, 1975).
The basic idea of the renormalization group is introduced and illustrative examples are presented. Emphasis is put on the application to the theory of critical phenomena. This article is prepared for pedagogical purposes. It is written at a level that a second-year graduate student in physical sciences can understand. No previous knowledge of critical phenomena or field theory is needed. We make no attempt to survey the field or cover a wide range of subjects. On the contrary, we limit the scope to the most basic aspects. We choose to elaborate at length to make the basic idea clear and the definitions precise, and to go through the examples very carefully. We feel that once these basic aspect are understood, there will be no difficulty in confronting the rapidly expanding literature on this subject.