Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EPJ Quantum Technology

Soft syndrome iterative decoding of quantum LDPC codes and hardware architectures

Nithin Raveendran, Javier Valls, Asit Kumar Pradhan, Narayanan Rengaswamy, Francisco García-Herrero, Bane V. Vasic

Published Oct 19, 2023• 7 citations
Publisher

Abstract

Abstract In practical quantum error correction implementations, the measurement of syndrome information is an unreliable step—typically modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this “soft” or analog information to benefit iterative decoders for decoding quantum low-density parity-check (QLDPC) codes. Syndrome-based iterative belief propagation decoders are modified to utilize the soft syndrome to correct both data and syndrome errors simultaneously. We demonstrate the advantages of the proposed scheme not only in terms of comparison of thresholds and logical error rates for quasi-cyclic lifted-product QLDPC code families but also with faster convergence of iterative decoders. Additionally, we derive hardware (FPGA) architectures of these soft syndrome decoders and obtain similar performance in terms of error correction to the ideal models even with reduced precision in the soft information. The total latency of the hardware architectures is about 600 ns (for the QLDPC codes considered) in a 20 nm CMOS process FPGA device, and the area overhead is almost constant—less than 50% compared to min-sum decoders with noisy syndromes.

DOI
10.1140/epjqt/s40507-023-00201-1

Related papers

Soft Syndrome Decoding of Quantum LDPC Codes for Joint Correction of Data and Syndrome Errors

Nithin Raveendran, Narayanan Rengaswamy, Asit Kumar Pradhan +1 more

Quantum errors are primarily detected and corrected using the measurement of syndrome information which itself is an unreliable step in practical error correction implementations. Typically, such faulty or noisy syndrome measurements are modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this "soft" or analog information without the conventional discretization step to benefit the iterative decoders for decoding quantum low-density parity-check (QLDPC) codes. Syndrome-based iterative belief propagation decoders are modified to utilize the syndrome-soft information to successfully correct both data and syndrome errors simultaneously, without repeated measurements. We demonstrate the advantages of extracting the soft information from the syndrome in our improved decoders, not only in terms of comparison of thresholds and logical error rates for quasi-cyclic lifted-product QLDPC code families, but also for faster convergence of iterative decoders. In particular, the new BP decoder with noisy syndrome performs as good as the standard BP decoder under ideal syndrome.

arXiv:2205.02341•IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 1, 2022•25 citations

High-Throughput Normalized Min-Sum Belief Propagation Decoding for Quantum LDPC Codes with Near-Memory Processing

Jeonggeun Seo, Youngsun Han, Leanghok Hour +1 more

Real-time quantum error correction requires classical decoders to process growing syndrome workloads with low and predictable latency. For quantum low-density parity-check (qLDPC) codes, iterative belief propagation (BP) repeatedly updates messages over sparse Tanner graphs, creating substantial memory-access and data-movement demands. We map normalized Min-Sum BP decoding of the [[144,12,12]] Bivariate Bicycle qLDPC code onto a DPU-based Processing-in-Memory (PIM) architecture. Within each DPU, 11 tasklets cooperatively decode one syndrome, while multiple DPUs process independent syndrome instances in parallel. Using uPIMulator and a data-qubit Pauli error model with ideal syndrome measurements, we compare throughput, per-syndrome processing time, logical error rate (LER), and single-syndrome tail latency against a 16-logical-CPU baseline. At a component-wise physical error probability of p=0.001 and one BP iteration, the projected aggregate kernel throughput of 2,560 DPUs reaches 1.071 x 10^7 decodes/s, compared with 1.22 x 10^6 decodes/s for the CPU, an 8.8x improvement. From two iterations onward, the measured LER remains below the physical error probability for every evaluated value of p. For one to five iterations, the maximum sampled serialized X+Z DPU compute latency remains below the 1 ms decoder-side reference for trapped-ion QEC, reaching approximately 0.873 ms at five iterations. These results show that near-memory processing can provide high aggregate throughput and sub-millisecond compute latency for qLDPC BP decoding under the evaluated conditions.

quant-pharXiv:2608.27901•Aug 31, 2026•0 citations

Noisy Soft Syndrome Decoding of Quantum LDPC Codes for the Quantum Erasure Channel

R. Gayathri, Shobhit Bhatnagar, P. Vijay Kumar

Erasure decoding of quantum low-density paritycheck (QLDPC) codes has recently received a lot of interest as qubit erasures occur in many physical systems such as neutralatom systems, trapped-ion systems etc. However, decoding of QLDPC codes heavily relies on syndrome information, which may be unreliable as syndrome extraction circuits are prone to errors in practice. While syndrome errors are usually modeled as flipping of a binary syndrome bit, typically, measurement outcomes yield analog voltage/current values, which are then discretized to obtain the binary syndrome. Prior work on correcting qubit errors in the presence of syndrome noise shows that this soft (i.e., analog) information can be exploited to achieve performance improvement. In this paper, we consider the case of qubit erasures and present an iterative decoding algorithm, based on the hardware-friendly min-sum algorithm, that incorporates this soft information to perform check node updates. We show via simulations on hypergraph product codes and lifted product codes that our decoder achieves performance very close to that in the case of noiseless syndrome for a certain noise regime.

National Conference on Communications•Feb 26, 2026•0 citations

Syndrome-Based Min-Sum vs OSD-0 Decoders: FPGA Implementation and Analysis for Quantum LDPC Codes

Javier Valls, Francisco García-Herrero, Nithin Raveendran +1 more

Quantum processors need to improve their reliability to scale up the number of qubits and increase the number of algorithms that can execute. To reduce the logical error rate of the quantum systems, the use of error correction codes and decoders has been established as a low-cost and feasible approach, with good results from a theoretical perspective, for mid and long-term architectures. While most of the authors are focused on the algorithms to improve the correction capability of quantum computers, without taking into account a fundamental implementation aspect for their deployment in a real system, i.e., their latency must be bounded to avoid the qubit decoherence, only a few propose hardware architectures and they just include time estimations of their decoding latency. However, a real implementation has not been shown yet. In this work, we analyze from the point of view of hardware implementation two algorithmic options based on quantum low-density parity-check (QLDPC) codes: a) belief propagation min-sum decoders combined with codes with good error-floor behavior and b) belief propagation min-sum decoders concatenated with ordered statistics decoders (OSDs) for codes with early error-floor. The bounds for the maximum clock frequency required by the decoders to decode within the qubit coherence time are established as a parameter to show if a practical implementation is possible with the present or near future FPGA technology. Furthermore, real implementation results for a Xilinx FPGA device are provided, showing that some solutions can meet the timing constraints set up by the state-of-the-art quantum processors.

IEEE Access•Jan 1, 2021•36 citations

Untangling QLDPC Codes with Biased Noise Ancilla

Runjiang Bi, Kathleen Chang, Shruti Puri

Remarkable technical progress has made high-rate, high-distance, quantum low-density parity-check codes (QLDPC) promising candidates for scalable quantum computing. However, it is hard to design low-depth syndrome extraction circuits that do not spread errors from ancilla qubits to multiple data qubits, also known as hook errors, for general QLDPC codes. Additionally, widely used decoders for these codes based on belief propagation are impaired due to short loops in the Tanner graph. Here, we investigate a hardware-aware approach to avoid these hooks and loops using biased noise ancillas. Using examples of bicycle bivariate codes and a cyclic hypergraph product code, which have been widely considered for practical application, we show that the effective fault-distance of the conventional syndrome extraction circuit can be significantly higher and the number of short loops can be significantly lower when the ancillas are subject to phase-flip errors only, compared to when they are also subject to bit-flip errors. This can result in almost an order of magnitude improvement in the logical error rate at circuit noise of $2\times 10^{-3}$ and when bit-flip errors in the ancilla are 50 times less likely than phase-flip errors. Our work demonstrates a significant and practical quantum error correction advantage with biased noise qubits in which full-bias cannot be maintained.

quant-pharXiv:2606.30592•Jun 30, 2026•2 citations

Analog Information Decoding of Bosonic Quantum Low-Density Parity-Check Codes

Lucas Berent, Timo Hillmann, Jens Eisert +2 more

Quantum error correction is crucial for scalable quantum information-processing applications. Traditional discrete-variable quantum codes that use multiple two-level systems to encode logical information can be hardware intensive. An alternative approach is provided by bosonic codes, which use the infinite-dimensional Hilbert space of harmonic oscillators to encode quantum information. Two promising features of bosonic codes are that syndrome measurements are natively analog and that they can be concatenated with discrete-variable codes. In this work, we propose novel decoding methods that explicitly exploit the analog syndrome information obtained from the bosonic qubit readout in a concatenated architecture. Our methods are versatile and can be generally applied to any bosonic code concatenated with a quantum low-density parity-check (QLDPC) code. Furthermore, we introduce the concept of quasi-single shot protocols as a novel approach that significantly reduces the number of repeated syndrome measurements required when decoding under phenomenological noise. To realize the protocol, we present the first implementation of time-domain decoding with the overlapping window method for general QLDPC codes and a novel analog single-shot decoding method. Our results lay the foundation for general decoding algorithms using analog information and demonstrate promising results in the direction of fault-tolerant quantum computation with concatenated bosonic-QLDPC codes. Published by the American Physical Society 2024

arXiv:2311.01328•PRX Quantum•May 30, 2024•21 citations
Abstract In practical quantum error correction implementations, the measurement of syndrome information is an unreliable step—typically modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this “soft” or analog information to benefit iterative decoders for decoding quantum low-density parity-check (QLDPC) codes. Syndrome-based iterative belief propagation decoders are modified to utilize the soft syndrome to correct both data and syndrome errors simultaneously. We demonstrate the advantages of the proposed scheme not only in terms of comparison of thresholds and logical error rates for quasi-cyclic lifted-product QLDPC code families but also with faster convergence of iterative decoders. Additionally, we derive hardware (FPGA) architectures of these soft syndrome decoders and obtain similar performance in terms of error correction to the ideal models even with reduced precision in the soft information. The total latency of the hardware architectures is about 600 ns (for the QLDPC codes considered) in a 20 nm CMOS process FPGA device, and the area overhead is almost constant—less than 50% compared to min-sum decoders with noisy syndromes.
Quantum errors are primarily detected and corrected using the measurement of syndrome information which itself is an unreliable step in practical error correction implementations. Typically, such faulty or noisy syndrome measurements are modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this "soft" or analog information without the conventional discretization step to benefit the iterative decoders for decoding quantum low-density parity-check (QLDPC) codes. Syndrome-based iterative belief propagation decoders are modified to utilize the syndrome-soft information to successfully correct both data and syndrome errors simultaneously, without repeated measurements. We demonstrate the advantages of extracting the soft information from the syndrome in our improved decoders, not only in terms of comparison of thresholds and logical error rates for quasi-cyclic lifted-product QLDPC code families, but also for faster convergence of iterative decoders. In particular, the new BP decoder with noisy syndrome performs as good as the standard BP decoder under ideal syndrome.
Real-time quantum error correction requires classical decoders to process growing syndrome workloads with low and predictable latency. For quantum low-density parity-check (qLDPC) codes, iterative belief propagation (BP) repeatedly updates messages over sparse Tanner graphs, creating substantial memory-access and data-movement demands. We map normalized Min-Sum BP decoding of the [[144,12,12]] Bivariate Bicycle qLDPC code onto a DPU-based Processing-in-Memory (PIM) architecture. Within each DPU, 11 tasklets cooperatively decode one syndrome, while multiple DPUs process independent syndrome instances in parallel. Using uPIMulator and a data-qubit Pauli error model with ideal syndrome measurements, we compare throughput, per-syndrome processing time, logical error rate (LER), and single-syndrome tail latency against a 16-logical-CPU baseline. At a component-wise physical error probability of p=0.001 and one BP iteration, the projected aggregate kernel throughput of 2,560 DPUs reaches 1.071 x 10^7 decodes/s, compared with 1.22 x 10^6 decodes/s for the CPU, an 8.8x improvement. From two iterations onward, the measured LER remains below the physical error probability for every evaluated value of p. For one to five iterations, the maximum sampled serialized X+Z DPU compute latency remains below the 1 ms decoder-side reference for trapped-ion QEC, reaching approximately 0.873 ms at five iterations. These results show that near-memory processing can provide high aggregate throughput and sub-millisecond compute latency for qLDPC BP decoding under the evaluated conditions.
Erasure decoding of quantum low-density paritycheck (QLDPC) codes has recently received a lot of interest as qubit erasures occur in many physical systems such as neutralatom systems, trapped-ion systems etc. However, decoding of QLDPC codes heavily relies on syndrome information, which may be unreliable as syndrome extraction circuits are prone to errors in practice. While syndrome errors are usually modeled as flipping of a binary syndrome bit, typically, measurement outcomes yield analog voltage/current values, which are then discretized to obtain the binary syndrome. Prior work on correcting qubit errors in the presence of syndrome noise shows that this soft (i.e., analog) information can be exploited to achieve performance improvement. In this paper, we consider the case of qubit erasures and present an iterative decoding algorithm, based on the hardware-friendly min-sum algorithm, that incorporates this soft information to perform check node updates. We show via simulations on hypergraph product codes and lifted product codes that our decoder achieves performance very close to that in the case of noiseless syndrome for a certain noise regime.
Quantum processors need to improve their reliability to scale up the number of qubits and increase the number of algorithms that can execute. To reduce the logical error rate of the quantum systems, the use of error correction codes and decoders has been established as a low-cost and feasible approach, with good results from a theoretical perspective, for mid and long-term architectures. While most of the authors are focused on the algorithms to improve the correction capability of quantum computers, without taking into account a fundamental implementation aspect for their deployment in a real system, i.e., their latency must be bounded to avoid the qubit decoherence, only a few propose hardware architectures and they just include time estimations of their decoding latency. However, a real implementation has not been shown yet. In this work, we analyze from the point of view of hardware implementation two algorithmic options based on quantum low-density parity-check (QLDPC) codes: a) belief propagation min-sum decoders combined with codes with good error-floor behavior and b) belief propagation min-sum decoders concatenated with ordered statistics decoders (OSDs) for codes with early error-floor. The bounds for the maximum clock frequency required by the decoders to decode within the qubit coherence time are established as a parameter to show if a practical implementation is possible with the present or near future FPGA technology. Furthermore, real implementation results for a Xilinx FPGA device are provided, showing that some solutions can meet the timing constraints set up by the state-of-the-art quantum processors.
Remarkable technical progress has made high-rate, high-distance, quantum low-density parity-check codes (QLDPC) promising candidates for scalable quantum computing. However, it is hard to design low-depth syndrome extraction circuits that do not spread errors from ancilla qubits to multiple data qubits, also known as hook errors, for general QLDPC codes. Additionally, widely used decoders for these codes based on belief propagation are impaired due to short loops in the Tanner graph. Here, we investigate a hardware-aware approach to avoid these hooks and loops using biased noise ancillas. Using examples of bicycle bivariate codes and a cyclic hypergraph product code, which have been widely considered for practical application, we show that the effective fault-distance of the conventional syndrome extraction circuit can be significantly higher and the number of short loops can be significantly lower when the ancillas are subject to phase-flip errors only, compared to when they are also subject to bit-flip errors. This can result in almost an order of magnitude improvement in the logical error rate at circuit noise of 2×10−32\times 10^{-3}2×10−3 and when bit-flip errors in the ancilla are 50 times less likely than phase-flip errors. Our work demonstrates a significant and practical quantum error correction advantage with biased noise qubits in which full-bias cannot be maintained.
Quantum error correction is crucial for scalable quantum information-processing applications. Traditional discrete-variable quantum codes that use multiple two-level systems to encode logical information can be hardware intensive. An alternative approach is provided by bosonic codes, which use the infinite-dimensional Hilbert space of harmonic oscillators to encode quantum information. Two promising features of bosonic codes are that syndrome measurements are natively analog and that they can be concatenated with discrete-variable codes. In this work, we propose novel decoding methods that explicitly exploit the analog syndrome information obtained from the bosonic qubit readout in a concatenated architecture. Our methods are versatile and can be generally applied to any bosonic code concatenated with a quantum low-density parity-check (QLDPC) code. Furthermore, we introduce the concept of quasi-single shot protocols as a novel approach that significantly reduces the number of repeated syndrome measurements required when decoding under phenomenological noise. To realize the protocol, we present the first implementation of time-domain decoding with the overlapping window method for general QLDPC codes and a novel analog single-shot decoding method. Our results lay the foundation for general decoding algorithms using analog information and demonstrate promising results in the direction of fault-tolerant quantum computation with concatenated bosonic-QLDPC codes. Published by the American Physical Society 2024