Quantum errors are primarily detected and corrected using the measurement of syndrome information which itself is an unreliable step in practical error correction implementations. Typically, such faulty or noisy syndrome measurements are modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this "soft" or analog information without the conventional discretization step to benefit the iterative decoders for decoding quantum low-density parity-check (QLDPC) codes. Syndrome-based iterative belief propagation decoders are modified to utilize the syndrome-soft information to successfully correct both data and syndrome errors simultaneously, without repeated measurements. We demonstrate the advantages of extracting the soft information from the syndrome in our improved decoders, not only in terms of comparison of thresholds and logical error rates for quasi-cyclic lifted-product QLDPC code families, but also for faster convergence of iterative decoders. In particular, the new BP decoder with noisy syndrome performs as good as the standard BP decoder under ideal syndrome.
Quantum errors are primarily detected and corrected using the measurement of syndrome information which itself is an unreliable step in practical error correction implementations. Typically, such faulty or noisy syndrome measurements are modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this "soft" or analog information without the conventional discretization step to benefit the iterative decoders for decoding quantum low-density parity-check (QLDPC) codes. Syndrome-based iterative belief propagation decoders are modified to utilize the syndrome-soft information to successfully correct both data and syndrome errors simultaneously, without repeated measurements. We demonstrate the advantages of extracting the soft information from the syndrome in our improved decoders, not only in terms of comparison of thresholds and logical error rates for quasi-cyclic lifted-product QLDPC code families, but also for faster convergence of iterative decoders. In particular, the new BP decoder with noisy syndrome performs as good as the standard BP decoder under ideal syndrome.
Abstract In practical quantum error correction implementations, the measurement of syndrome information is an unreliable step—typically modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this “soft” or analog information to benefit iterative decoders for decoding quantum low-density parity-check (QLDPC) codes. Syndrome-based iterative belief propagation decoders are modified to utilize the soft syndrome to correct both data and syndrome errors simultaneously. We demonstrate the advantages of the proposed scheme not only in terms of comparison of thresholds and logical error rates for quasi-cyclic lifted-product QLDPC code families but also with faster convergence of iterative decoders. Additionally, we derive hardware (FPGA) architectures of these soft syndrome decoders and obtain similar performance in terms of error correction to the ideal models even with reduced precision in the soft information. The total latency of the hardware architectures is about 600 ns (for the QLDPC codes considered) in a 20 nm CMOS process FPGA device, and the area overhead is almost constant—less than 50% compared to min-sum decoders with noisy syndromes.
Erasure decoding of quantum low-density paritycheck (QLDPC) codes has recently received a lot of interest as qubit erasures occur in many physical systems such as neutralatom systems, trapped-ion systems etc. However, decoding of QLDPC codes heavily relies on syndrome information, which may be unreliable as syndrome extraction circuits are prone to errors in practice. While syndrome errors are usually modeled as flipping of a binary syndrome bit, typically, measurement outcomes yield analog voltage/current values, which are then discretized to obtain the binary syndrome. Prior work on correcting qubit errors in the presence of syndrome noise shows that this soft (i.e., analog) information can be exploited to achieve performance improvement. In this paper, we consider the case of qubit erasures and present an iterative decoding algorithm, based on the hardware-friendly min-sum algorithm, that incorporates this soft information to perform check node updates. We show via simulations on hypergraph product codes and lifted product codes that our decoder achieves performance very close to that in the case of noiseless syndrome for a certain noise regime.
Due to the high error rate of qubits, detecting and correcting errors is essential for achieving fault-tolerant quantum computing (FTQC). Quantum low-density parity-check (QLDPC) codes are one of the most promising quantum error correction (QEC) methods due to their high encoding rates. BP (Belief Propagation)-based decoders are widely used and highly competitive for QLDPC codes because BP offers inherent parallelism and strong scalability. However, BP-based decoders still suffer from high decoding latency, a large portion of which is spent in the iterative BP stage. In this paper, we propose a lightweight preprocessing step that utilizes local patterns in the syndrome to detect likely trivial error events and provide them as hints to BP-based decoders. These hints accelerate BP convergence and thereby reduce the overall decoding time. The proposed preprocessing step offers a broadly compatible approach to reducing the latency of BP-based QLDPC decodes. On the bivariate bicycle code [[144,12,12]] at low physical error rates, our method achieves a 10× speedup in decoding time for BP-OSD, and more than 2× speedup for both BP-LSD and Relay-BP. Our method maintains the logical error rate when combined with BP-OSD and Relay-BP, while further achieving a significant reduction in logical error rate when combined with BP-LSD.
The typical model for measurement noise in quantum error correction is to randomly flip the binary measurement outcome. In experiments, measurements yield much richer information - e.g., continuous current values, discrete photon counts - which is then mapped into binary outcomes by discarding some of this information. In this work, we consider methods to incorporate all of this richer information, typically called soft information, into the decoding of quantum error correction codes, and in particular the surface code. We describe how to modify both the Minimum Weight Perfect Matching and Union-Find decoders to leverage soft information, and demonstrate these soft decoders outperform the standard (hard) decoders that can only access the binary measurement outcomes. Moreover, we observe that the soft decoder achieves a threshold 25\% higher than any hard decoder for phenomenological noise with Gaussian soft measurement outcomes. We also introduce a soft measurement error model with amplitude damping, in which measurement time leads to a trade-off between measurement resolution and additional disturbance of the qubits. Under this model we observe that the performance of the surface code is very sensitive to the choice of the measurement time - for a distance-19 surface code, a five-fold increase in measurement time can lead to a thousand-fold increase in logical error rate. Moreover, the measurement time that minimizes the physical error rate is distinct from the one that minimizes the logical performance, pointing to the benefits of jointly optimizing the physical and quantum error correction layers.
Accurate decoding of quantum low-density parity-check (qLDPC) codes often relies on expensive post-processing search, although decoding difficulty varies strongly between syndromes. We find that the benefit of deeper post-processing search is highly concentrated in a small subset of decoding instances, and that these instances can be identified directly from the decoder itself. To this end, we introduce an adaptive decoder based on belief propagation (BP) and ordered-statistics decoding (OSD), using the disagreement between the BP hard decision and the syndrome-consistent order-zero OSD solution as an internal risk signal to determine where deeper search is required. On a [[144,12,12]] bivariate bicycle code under circuit-level depolarising noise, encoding 12 logical qubits in 144 data qubits with distance 12, escalating only the highest-risk 20% of instances recovers 85% to 92% of the improvement in logical error rate available from a full one-free-variable sweep, while reducing the mean serial decoding cost by a factor of 3.6 relative to applying the same truncated search to every instance. At matched budget, disagreement-guided routing also outperforms routing based on the BP syndrome residual, syndrome weight and random selection. The same behaviour reappears on a structurally distinct radial qLDPC code obtained from a lifted-product construction, where escalating 20% of instances recovers 87% to 94% of the available gain. A Z-memory experiment on the Quantinuum H2 trapped-ion processor, implementing both X-type and Z-type checks, further shows that the signal remains predictive under device noise. These results show that decoder-internal disagreement can expose where additional decoding effort is valuable, allowing classical computation to be concentrated on the instances most likely to benefit from it.
Quantum low-density parity-check (QLDPC) codes represent a promising approach for error correction in quantum computing. The recently proposed Tesseract decoder uses the A* search algorithm that guarantees finding the most likely error pattern. However, practical implementations of Tesseract often involve an extremely large graph, and the inherently sequential nature of the search results in high computational overhead and long runtime. To improve decoding efficiency, we propose a two-stage decoding framework. First, a belief propagation (BP) decoder efficiently processes the syndrome. This step generates hard decisions (a binary error vector) and soft information (per-qubit confidence levels). In non-convergent BP cases, a gating mechanism examines the BP decoder's output to identify and filter out qubits with oscillating confidence values. In these cases, the refined output serves as input to Tesseract, which then attempts to identify and correct any residual errors. This hybrid approach leverages the high speed of BP decoding and delegates the more challenging decoding instances to Tesseract. Numerical results demonstrate a substantial reduction in overall decoding complexity while maintaining the logical error rate (LER) of the stand-alone Tesseract. Across all tested physical error rates, the proposed method achieves at least 5x reduction in the number of expanded nodes in the Tesseract, with a peak reduction of nearly 15x at a physical error rate of p = 0.05 for the [[126, 12, d < 11]] T1 code, and approximately 8.8x at p = 0.05 for the [[72, 12, 6]] bicycle bivariate (BB) code.