Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)

Chip-Scale Optical Clock Scheme Based on Dual-Wavelength Modulation Transfer Spectroscopy

Jie Miao, Qiaohui Yang, Jiqing Lian, Tianyu Liu, Duo Pan, Jingbiao Chen

Published May 15, 2023• 0 citations
Publisher

Abstract

In this paper we propose a new scheme to realize the chip-scale optical clock by using a dual-wavelength modulation transfer spectroscopy (DWMTS). The electro-optical modulator (EOM) and isolator in conventional modulation transfer spectroscopy which is complicated to be built on chip can thus be avoided. We remove the EOM and isolator at the price of an extra laser, which perform the volume optimization of the entire optical system, making the optical clock based on DWMTS to be a competitive candidate.

DOI
10.1109/eftf/ifcs57587.2023.10272234

Related papers

Chip-scale Optical Clock Based on Modulation Transfer Spectroscopy

Qiaohui Yang, Tianyu Liu, Jie Miao +2 more

SummaryWe propose a scheme for realizing a chip-scale optical clock based on modulation transfer spectroscopy. By using on-chip laser, lithium niobate thin film waveguides and MEMS cells, the laser frequency can be stabilized at the hyperfine transition of rubidium atomic line. In this way, the volume and power consumption of the optical clock can be greatly reduced while the performance is guaranteed.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•0 citations

Dual-Optical-Transition Modulation Transfer Spectroscopy Based on Ladder-Type Energy Structure

Jingming Chen, Jie Miao, Yuanchen Qi +4 more

Modulation transfer spectroscopy (MTS) provides a high-resolution, Doppler-free method for laser frequency stabilization, offering excellent signal-to-noise ratio and robustness, particularly suited for compact thermal atomic clocks. Extending this approach, dual-optical-transition MTS (DOT-MTS) enables the simultaneous stabilization of two optical transitions within a single atomic ensemble, paving the way for multi-wavelength frequency references in integrated systems. Despite its potential, DOT-MTS remains relatively unexplored. In this work, we demonstrate DOT-MTS in a ladder-type configuration using87Rb atoms. Both optical-optical double resonance (OODR) and double-resonance optical pumping (DROP) signals are clearly observed. Through systematic optimization of experimental parameters, the system achieves a self-evaluated short-term frequency stability at the 1E-13 level. These results demonstrate the feasibility of DOT-MTS as a high-performance, compact frequency reference and open a promising avenue toward the development of portable optical clocks.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 12, 2025•0 citations

Modulation transfer spectroscopy on Cs D2 line exposed to a dual-frequency laser field

Pengyuan Chang, Jun Pan, Chunlai Li +3 more

Modulation transfer spectroscopy is a pump-probe technique which can generate dispersive-like lineshapes suitable for laser frequency stabilization. In this study, a new type of modulation transfer spectroscopy is accomplished by utilizing a dual-frequency laser system. The dual frequency laser is obtained using an acousto-optic modulator (AOM). We identified and characterized modulation transfer spectroscopy on the D2 transitions in Cs using an electro-optic modulator (EOM). We show that the amplitude of modulation transfer spectroscopy signals, for the Cs F=4 Ĭ F’=5 and the crossover resonance induced by the dual frequency laser, can be significantly enhanced by addressing more nonzero-velocity groups. The new modulation transfer spectroscopy signal with higher the peak to peak amplitude than original modulation transfer spectroscopy signal is observed. The modulation transfer signal for the crossover resonance induced by the dual frequency laser is also can generate a clear line for laser frequency stabilization, and may be helpful to improve the frequency stability. © 2021 SPIE.

Optics Frontier Conference (OFS)•Jun 18, 2021•0 citations

Compact optical frequency standard using a wafer-level MEMS vapor cell

Qiaohui Yang, Zhenyu Hu, Tian Liu +6 more

Atomic clocks represent the most advanced instruments for providing time-frequency standards, with increasing demand for designs that offer high frequency stability while minimizing size. Central to an atomic clock’s function is the atomic vapor cell, which serves as the quantum reference. Compared to traditional cells, wafer-level micro-electro-mechanical systems (MEMS) vapor cells enable cost-effective, scalable production and facilitate integration with silicon-based chips. In this work, we present a wafer-level MEMS vapor cell featuring an innovative silicon-glass-silicon transverse optical path structure. A single wafer is used to fabricate 24 identical atomic vapor cells, each with precise dimensions of 14 mm×14 mm×4.3 mm, ensuring scalability. We demonstrate an optical frequency standard that combines modulation transfer spectroscopy (MTS) with a MEMS vapor cell, featuring a compact design with excellent performance. This frequency standard achieves stability over averaging times of 1–400 s, with short-term stability of 2.6×10 −13 at 1 s and 5.1×10 −14 at 200 s. The laser linewidth is only 3.9 kHz, marking a substantial improvement over existing thermal standards, and opening potential applications in navigation, radar, and precision measurement. This work provides a crucial step toward the development of chip-scale optical clocks.

Photonics Research•Jun 12, 2025•10 citations

The 1529 nm Laser Stabilization Based on Dual-wavelength Modulation Transfer Spectroscopy

Jie Miao, Jingming Chen, Jiqing Lian +4 more

Modulation transfer spectroscopy (MTS) is a widely adopted sub-Doppler spectroscopic technique used for laser stabilization. In conventional MTS, modulation of the pump light is transferred to the probe light within a single atomic transition. A high population of atoms in the ground state is essential for achieving a high signal-to-noise ratio in MTS. Consequently, traditional MTS cannot be effectively applied to atomic transitions between higher energy levels, where the population of atoms is significantly lower. This work proposes a novel approach to stabilize a 1529 nm laser using dual-wavelength MTS. In this scheme, the pump and probe lights are generated by separate lasers, allowing for the modulation transfer process to occur between a 780 nm laser and a 1529 nm laser. Specifically, a prestabilized and modulated 780 nm laser is used as the pump light to interact with atoms, while the 1529 nm laser acts as the probe light to generate the servo signal necessary for locking the 1529 nm laser. This technique is versatile and can be applied to various atomic ensembles, including potassium (K), cesium (Cs), and lithium (Li).

IEEE Ultrasonics, Ferroelectrics, and Frequency Control Joint Symposium (UFFC-JS)•Sep 22, 2024•0 citations

Single-atomic-ensemble dual-wavelength optical frequency standard

Jie Miao, Jingming Chen, Deshui Yu +3 more

We demonstrate a dual-wavelength optical frequency standard based on the dual-optical-transition modulation transfer spectroscopy (DOT-MTS) between different quantum transitions of the rubidium D1 (795 nm) and D2 (780 nm) lines. In a single rubidium atomic ensemble, modulation frequency sidebands from the 780 nm pump beam are simultaneously transferred to both the 780 and 795 nm probe lasers. The DOT-MTS enables the simultaneous stabilization of 780 and 795 nm lasers on a single vapor cell. Both lasers exhibit a frequency instability in the low 10 −14 range at 1 s of averaging, as estimated from the residual error signal. A theoretical model is developed based on the V-type atomic level structure to illustrate the dual-wavelength spectroscopy. This approach can be extended to develop a multi-wavelength optical frequency standard within a single atomic ensemble, broadening its applicability in fields such as precision metrology, Rydberg atoms, wavelength standards, optical networks, and beyond.

arXiv:2411.02107•Photonics Research•Jan 10, 2025•10 citations
In this paper we propose a new scheme to realize the chip-scale optical clock by using a dual-wavelength modulation transfer spectroscopy (DWMTS). The electro-optical modulator (EOM) and isolator in conventional modulation transfer spectroscopy which is complicated to be built on chip can thus be avoided. We remove the EOM and isolator at the price of an extra laser, which perform the volume optimization of the entire optical system, making the optical clock based on DWMTS to be a competitive candidate.
Modulation transfer spectroscopy (MTS) provides a high-resolution, Doppler-free method for laser frequency stabilization, offering excellent signal-to-noise ratio and robustness, particularly suited for compact thermal atomic clocks. Extending this approach, dual-optical-transition MTS (DOT-MTS) enables the simultaneous stabilization of two optical transitions within a single atomic ensemble, paving the way for multi-wavelength frequency references in integrated systems. Despite its potential, DOT-MTS remains relatively unexplored. In this work, we demonstrate DOT-MTS in a ladder-type configuration using87Rb atoms. Both optical-optical double resonance (OODR) and double-resonance optical pumping (DROP) signals are clearly observed. Through systematic optimization of experimental parameters, the system achieves a self-evaluated short-term frequency stability at the 1E-13 level. These results demonstrate the feasibility of DOT-MTS as a high-performance, compact frequency reference and open a promising avenue toward the development of portable optical clocks.
Modulation transfer spectroscopy is a pump-probe technique which can generate dispersive-like lineshapes suitable for laser frequency stabilization. In this study, a new type of modulation transfer spectroscopy is accomplished by utilizing a dual-frequency laser system. The dual frequency laser is obtained using an acousto-optic modulator (AOM). We identified and characterized modulation transfer spectroscopy on the D2 transitions in Cs using an electro-optic modulator (EOM). We show that the amplitude of modulation transfer spectroscopy signals, for the Cs F=4 Ĭ F’=5 and the crossover resonance induced by the dual frequency laser, can be significantly enhanced by addressing more nonzero-velocity groups. The new modulation transfer spectroscopy signal with higher the peak to peak amplitude than original modulation transfer spectroscopy signal is observed. The modulation transfer signal for the crossover resonance induced by the dual frequency laser is also can generate a clear line for laser frequency stabilization, and may be helpful to improve the frequency stability. © 2021 SPIE.
Atomic clocks represent the most advanced instruments for providing time-frequency standards, with increasing demand for designs that offer high frequency stability while minimizing size. Central to an atomic clock’s function is the atomic vapor cell, which serves as the quantum reference. Compared to traditional cells, wafer-level micro-electro-mechanical systems (MEMS) vapor cells enable cost-effective, scalable production and facilitate integration with silicon-based chips. In this work, we present a wafer-level MEMS vapor cell featuring an innovative silicon-glass-silicon transverse optical path structure. A single wafer is used to fabricate 24 identical atomic vapor cells, each with precise dimensions of 14 mm×14 mm×4.3 mm, ensuring scalability. We demonstrate an optical frequency standard that combines modulation transfer spectroscopy (MTS) with a MEMS vapor cell, featuring a compact design with excellent performance. This frequency standard achieves stability over averaging times of 1–400 s, with short-term stability of 2.6×10 −13 at 1 s and 5.1×10 −14 at 200 s. The laser linewidth is only 3.9 kHz, marking a substantial improvement over existing thermal standards, and opening potential applications in navigation, radar, and precision measurement. This work provides a crucial step toward the development of chip-scale optical clocks.
Modulation transfer spectroscopy (MTS) is a widely adopted sub-Doppler spectroscopic technique used for laser stabilization. In conventional MTS, modulation of the pump light is transferred to the probe light within a single atomic transition. A high population of atoms in the ground state is essential for achieving a high signal-to-noise ratio in MTS. Consequently, traditional MTS cannot be effectively applied to atomic transitions between higher energy levels, where the population of atoms is significantly lower. This work proposes a novel approach to stabilize a 1529 nm laser using dual-wavelength MTS. In this scheme, the pump and probe lights are generated by separate lasers, allowing for the modulation transfer process to occur between a 780 nm laser and a 1529 nm laser. Specifically, a prestabilized and modulated 780 nm laser is used as the pump light to interact with atoms, while the 1529 nm laser acts as the probe light to generate the servo signal necessary for locking the 1529 nm laser. This technique is versatile and can be applied to various atomic ensembles, including potassium (K), cesium (Cs), and lithium (Li).
We demonstrate a dual-wavelength optical frequency standard based on the dual-optical-transition modulation transfer spectroscopy (DOT-MTS) between different quantum transitions of the rubidium D1 (795 nm) and D2 (780 nm) lines. In a single rubidium atomic ensemble, modulation frequency sidebands from the 780 nm pump beam are simultaneously transferred to both the 780 and 795 nm probe lasers. The DOT-MTS enables the simultaneous stabilization of 780 and 795 nm lasers on a single vapor cell. Both lasers exhibit a frequency instability in the low 10 −14 range at 1 s of averaging, as estimated from the residual error signal. A theoretical model is developed based on the V-type atomic level structure to illustrate the dual-wavelength spectroscopy. This approach can be extended to develop a multi-wavelength optical frequency standard within a single atomic ensemble, broadening its applicability in fields such as precision metrology, Rydberg atoms, wavelength standards, optical networks, and beyond.