Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)

Progress on a 171Yb-Based Active Optical Atomic Clock

F. Ponciano-Ojeda, Jana El Badawi, Martin Hauden, Martina Matusko, Marion Delehaye

Published May 15, 2023• 1 citation
Publisher

Abstract

SummaryWe present our progress on the construction of a171Yb-based active optical atomic clock. The ytterbium (Yb) atoms, initially in a collimated thermal beam generated in an oven, are decelerated using a Zeeman slower to the capture velocity (~ 10 ms-1) for a magneto-optical trap on the1S0→3P1transition at 556 nm. This allows us to generate an ensemble of N >106atoms at temperatures below 100 μK, which will be transported using an optical conveyor belt to an ultra-stable (σy~ 10-13) cavity of finesse on the order of 104. Here, the atoms will be prepared in order to generate a superradiant emission which will serve as the frequency reference on the1S0→3P0clock transition in171Yb.

DOI
10.1109/eftf/ifcs57587.2023.10272180

Related papers

Magneto-Optical Trapping of Ytterbium Atoms with a 398.9 nm Laser

Zhao Peng-Yi, Xiong Zhuan-Xian, Jie Liang +2 more

We report the realization of ytterbium magneto-optical trap (MOT) operating on the dipole-allowed 1 S 0 — 1 P 1 transition at 398.9 nm. The MOT is loaded by a slowed atomic beam produced by a Zeeman slower. All seven stable isotopes of Yb atoms could be trapped separately at different laser detuning values. Over 10 7 174 Yb atoms are collected in the MOT, whereas the atom number of fermionic isotope 171 Yb is roughly 2.3 × 10 6 due to a lower abundance. Without the Zeeman slower, the trapped atom numbers are one order of magnitude lower. Both the even and odd isotopes are recognized as excellent candidates of optical clock transition, so the cooling and trapping of ytterbium atoms by the blue MOT is an important step for building an optical clock.

Chinese Physics Letters•Oct 1, 2008•16 citations

Ytterbium optical lattice clock at INRIM

Marco Pizzocaro, Filippo Bregolin, Gianmaria Milani +5 more

We present an optical lattice clock based on ytterbium 171Yb atoms developed in the laboratories of INRIM. In the experiment, we cool and trap ytterbium atoms in a two stage magneto-optical trap (MOT) (at 399nm and 556nm for the first and second stage, respectively). Atoms are then transferred in a horizontal, one-dimensional optical lattice at the magic wavelength (759 nm). Here the clock transition at 578nm is probed by a laser stabilized on an ultra-stable cavity. We describe the generation of all the laser sources, the physic package and the operation of the clock. Lasers at 399 nm, 556nm and 578nm are obtained, with different techniques, using non-linear crystals starting from infrared sources. The clock laser is stabilized using a high finesse notched ULE cavity. The lattice is made with a titanium-sapphire laser. The aluminum vacuum chamber is designed for wide optical access and its temperature is measured by 8 thermistors for blackbody shift evaluation. Our system allows for fast loading of the lattice with 1 × 104atoms trapped in the lattice in 250 ms. We obtained preliminary spectroscopy results and we locked the clock laser to the atomic line. Future perspectives are discussed.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2015•1 citation

Realization of Green MOT for Ytterbium Atoms

Zhao Peng-Yii, Xiong Zhuan-Xian, Yun Long +2 more

We report the experimental realization of a magneto-optical trap (MOT) of 174 Yb atoms operating on the 1 So− 3 P 1 intercombination transition at 555.8 nm. The green MOT is loaded by a Zeeman-slowed atomic beam. In order to increase the capture velocity of the MOT, we use the trapping laser beams consisting of five discrete frequency components obtained by modulating the laser light through an electro-optic modulator. The trapped atomic number of the 174 Yb isotope is about 6.2 × 10 5 , and the temperature of the cold atomic cloud is estimated to be about 100 μK. The success of the green MOT is an important step towards the goal of an ytterbium optical clock.

Chinese Physics Letters•Aug 1, 2009•12 citations

Ultra-Stable and Tunable Fabry-Perot Cavity for an Ytterbium Based Superradiant Laser

Martin Hauden, Martina Matusko, Jana El Badawi +3 more

SummaryActive optical atomic clocks are emerging as a new promising tool for time and frequency metrology. Such clocks have the potential to reach a fractional frequency instability in the 10-18range at one second [1]. These references are based on the superradiant emission of an ensemble of atoms coupled to a single mode of the electromagnetic field [2]. For optical references, this coupling is achieved through a resonant high-finesse Fabry-Perot cavity that therefore plays a crucial role to reach superradiant lasing. Specific characteristics are required to permit superradiant emission in a metrologically relevant regime: tunability of the cavity resonant frequency, ability to accommodate atoms and low fractional length fluctuations, in the order of 10-13. This work shows the conception, through simulation, assembly and preliminary characterization of this Fabry Perot cavity.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•1 citation

Towards Polish Optical Clock with Cold Strontium Atoms, present status and performance

Marcin Bober, Jerzy Zachorowski, Wojciech Gawlik +10 more

We report on the status of the work towards cold strontium clock in the Polish National Laboratory of AMO Physics in Torun. The system consists of: (1) a Zeeman slower and magneto-optical traps (at 461 nm and 689 nm), (2) a frequency comb, and (3) a narrow-band laser coupled to an ultra-stable optical cavity. So far, all parts of the experiment are working and the whole system is tested at the1S0-3P1, 689 nm optical transition in88Sr atoms with 7 kHz linewidth.

European Frequency and Time Forum•Apr 1, 2012•0 citations

Towards a strontium based stationary optical lattice clock

Qasim Hassan Ubaid

Optical atomic clocks have proven to be the most stable clocks with the lowest systematic uncertainty which has now reached a record level of (9.4 X10/(^{19}/)). Thus optical clocks now surpass the best fountain Cs atomic clocks by three orders of magnitude which opens the prospect of using optical clocks as frequency standards for timekeeping in the near future. \n \nThis thesis describes the progress that has been made towards a stationary optical lattice clock based on strontium atoms, and reports the results of an ongoing characterization. \n \nAn experimental apparatus was designed and built to efficiently slow, cool, and trap the strontium atoms which represent the heart of the strontium optical lattice clock discussed in this thesis. The novel aspects of the experimental development described in the thesis comprise a frequency doubling cavity for producing 461 nm laser light employed for cooling and trapping the strontium atoms in the first stage cooling. This cavity provided sufficient power for cooling and trapping the strontium atoms for up to 300 mW of 461 nm laser light. Furthermore, a new design of Zeeman slower based on spherical permanent magnets was produced, built and characterized. \n \nThe slower is compact, tunable, easy to assemble and maintain, and cost-effective as the permanent magnets do not require any power supply or water cooling. It is suggested that this kind of Zeeman slower constitutes an ideal solution for portable optical clock systems. A blue magneto-optical trap was realized for the first time with such a Zeeman slower. With about 30 mW of a 461 nm laser, up to 6X10/(^8/) atoms were captured.

•Jul 20, 2020•0 citations
SummaryWe present our progress on the construction of a171Yb-based active optical atomic clock. The ytterbium (Yb) atoms, initially in a collimated thermal beam generated in an oven, are decelerated using a Zeeman slower to the capture velocity (~ 10 ms-1) for a magneto-optical trap on the1S0→3P1transition at 556 nm. This allows us to generate an ensemble of N >106atoms at temperatures below 100 μK, which will be transported using an optical conveyor belt to an ultra-stable (σy~ 10-13) cavity of finesse on the order of 104. Here, the atoms will be prepared in order to generate a superradiant emission which will serve as the frequency reference on the1S0→3P0clock transition in171Yb.
We report the realization of ytterbium magneto-optical trap (MOT) operating on the dipole-allowed 1 S 0 — 1 P 1 transition at 398.9 nm. The MOT is loaded by a slowed atomic beam produced by a Zeeman slower. All seven stable isotopes of Yb atoms could be trapped separately at different laser detuning values. Over 10 7 174 Yb atoms are collected in the MOT, whereas the atom number of fermionic isotope 171 Yb is roughly 2.3 × 10 6 due to a lower abundance. Without the Zeeman slower, the trapped atom numbers are one order of magnitude lower. Both the even and odd isotopes are recognized as excellent candidates of optical clock transition, so the cooling and trapping of ytterbium atoms by the blue MOT is an important step for building an optical clock.
We present an optical lattice clock based on ytterbium 171Yb atoms developed in the laboratories of INRIM. In the experiment, we cool and trap ytterbium atoms in a two stage magneto-optical trap (MOT) (at 399nm and 556nm for the first and second stage, respectively). Atoms are then transferred in a horizontal, one-dimensional optical lattice at the magic wavelength (759 nm). Here the clock transition at 578nm is probed by a laser stabilized on an ultra-stable cavity. We describe the generation of all the laser sources, the physic package and the operation of the clock. Lasers at 399 nm, 556nm and 578nm are obtained, with different techniques, using non-linear crystals starting from infrared sources. The clock laser is stabilized using a high finesse notched ULE cavity. The lattice is made with a titanium-sapphire laser. The aluminum vacuum chamber is designed for wide optical access and its temperature is measured by 8 thermistors for blackbody shift evaluation. Our system allows for fast loading of the lattice with 1 × 104atoms trapped in the lattice in 250 ms. We obtained preliminary spectroscopy results and we locked the clock laser to the atomic line. Future perspectives are discussed.
We report the experimental realization of a magneto-optical trap (MOT) of 174 Yb atoms operating on the 1 So− 3 P 1 intercombination transition at 555.8 nm. The green MOT is loaded by a Zeeman-slowed atomic beam. In order to increase the capture velocity of the MOT, we use the trapping laser beams consisting of five discrete frequency components obtained by modulating the laser light through an electro-optic modulator. The trapped atomic number of the 174 Yb isotope is about 6.2 × 10 5 , and the temperature of the cold atomic cloud is estimated to be about 100 μK. The success of the green MOT is an important step towards the goal of an ytterbium optical clock.
SummaryActive optical atomic clocks are emerging as a new promising tool for time and frequency metrology. Such clocks have the potential to reach a fractional frequency instability in the 10-18range at one second [1]. These references are based on the superradiant emission of an ensemble of atoms coupled to a single mode of the electromagnetic field [2]. For optical references, this coupling is achieved through a resonant high-finesse Fabry-Perot cavity that therefore plays a crucial role to reach superradiant lasing. Specific characteristics are required to permit superradiant emission in a metrologically relevant regime: tunability of the cavity resonant frequency, ability to accommodate atoms and low fractional length fluctuations, in the order of 10-13. This work shows the conception, through simulation, assembly and preliminary characterization of this Fabry Perot cavity.
Optical atomic clocks have proven to be the most stable clocks with the lowest systematic uncertainty which has now reached a record level of (9.4 X10/(^{19}/)). Thus optical clocks now surpass the best fountain Cs atomic clocks by three orders of magnitude which opens the prospect of using optical clocks as frequency standards for timekeeping in the near future. \n \nThis thesis describes the progress that has been made towards a stationary optical lattice clock based on strontium atoms, and reports the results of an ongoing characterization. \n \nAn experimental apparatus was designed and built to efficiently slow, cool, and trap the strontium atoms which represent the heart of the strontium optical lattice clock discussed in this thesis. The novel aspects of the experimental development described in the thesis comprise a frequency doubling cavity for producing 461 nm laser light employed for cooling and trapping the strontium atoms in the first stage cooling. This cavity provided sufficient power for cooling and trapping the strontium atoms for up to 300 mW of 461 nm laser light. Furthermore, a new design of Zeeman slower based on spherical permanent magnets was produced, built and characterized. \n \nThe slower is compact, tunable, easy to assemble and maintain, and cost-effective as the permanent magnets do not require any power supply or water cooling. It is suggested that this kind of Zeeman slower constitutes an ideal solution for portable optical clock systems. A blue magneto-optical trap was realized for the first time with such a Zeeman slower. With about 30 mW of a 461 nm laser, up to 6X10/(^8/) atoms were captured.