Recent years have witnessed a tremendous amount of interest in wireless sensing, i.e., instead of employing traditional sensors, wireless signal is utilized for sensing purposes. Contact-free wireless sensing has been successfully demonstrated using various RF signals such as WiFi, RFID, LoRa, and mmWave, enabling a large range of applications. However, limited by hardware thermal noise, the granularity of RF sensing is still relatively coarse. In this paper, instead of using the macro signal power/phase for sensing, we propose the first quantum wireless sensing system, which uses the micro energy level of atoms for sensing, improving the sensing granularity by an order of magnitude. The proposed quantum wireless sensing system is capable of utilizing a wide spectrum of frequencies (e.g., 2.4 GHz, 5 GHz and 28 GHz) for sensing. We demonstrate the superior performance of quantum wireless sensing with two widely-used signals, i.e., WiFi and 28 GHz millimeter wave. We show that quantum wireless sensing can push the sensing granularity of WiFi from millimeter level to sub-millimeter level and push the sensing granularity of millimeter wave to micrometer level.
Recent years have witnessed a tremendous amount of interest in wireless sensing, i.e., instead of employing traditional sensors, wireless signal is utilized for sensing purposes. Contact-free wireless sensing has been successfully demonstrated using various RF signals such as WiFi, RFID, LoRa, and mmWave, enabling a large range of applications. However, limited by hardware thermal noise, the granularity of RF sensing is still relatively coarse. In this paper, instead of using the macro signal power/phase for sensing, we propose the first quantum wireless sensing system, which uses the micro energy level of atoms for sensing, improving the sensing granularity by an order of magnitude. The proposed quantum wireless sensing system is capable of utilizing a wide spectrum of frequencies (e.g., 2.4 GHz, 5 GHz and 28 GHz) for sensing. We demonstrate the superior performance of quantum wireless sensing with two widely-used signals, i.e., WiFi and 28 GHz millimeter wave. We show that quantum wireless sensing can push the sensing granularity of WiFi from millimeter level to sub-millimeter level and push the sensing granularity of millimeter wave to micrometer level.
In recent years, wireless sensing has garnered increasing attention from both industry and academia. Despite its promise, it still faces several fundamental challenges that are difficult to overcome, including hardware thermal noise limitation, antenna size constraint, and limited frequency band resources. At the same time, rapid advancements in quantum technology are driving continuous innovations. By thoroughly understanding the principles of both wireless sensing and quantum physics, we propose a novel paradigm: quantum wireless sensing. Although quantum wireless sensing originates from quantum measurement, its focus has shifted toward practical wireless sensing tasks. This evolution calls for a reassessment of parameter estimation, grounded in the fundamental principles of quantum physics. We believe the unique advantages of quantum receivers - specifically, their high sensitivity and wide frequency range - can unlock powerful quantum sensing capabilities across various domains, including terrestrial, aerospace, and maritime applications. This article articulates our vision for this emerging field, highlighting recent advancements in quantum wireless sensing and exploring promising directions for future research.
Recent years have witnessed the use of pervasive wireless signals (e.g., Wi-Fi, RFID, and mmWave) for sensing purposes. Due to its non-intrusive characteristic, wireless sensing plays an important role in various intelligent sensing applications. However, limited by the inherent thermal noise of RF transceivers, the sensing granularity of existing wireless sensing systems are still coarse, limiting their adoption for fine-grained sensing applications. In this paper, we introduce the quantum receiver, which does not contain traditional electronic components such as mixers, amplifiers, and analog-to-digital converters (ADCs) to wireless sensing systems, significantly reducing the source of thermal noise. By taking non-intrusive liquid recognition as an application example, we show the superior performance of quantum wireless sensing. By leveraging the unique property of quantum receiver, we propose a novel double-ratio method to address several well-known challenges in liquid recognition, eliminating the effect of liquid volume, device-target distance and container. We implement the quantum sensing prototype and evaluate the liquid recognition performance comprehensively. The results show that our system is able to recognize 17 commonly seen liquids, including very similar ones~(e.g., Pepsi and Coke) at an accuracy higher than 99.9\%. For milk expiration monitoring, our system is able to achieve an accuracy of 99.0\% for pH value measurements at a granularity of 0.1, which is much finer than that required for expiration monitoring.
Electromagnetic warfare (EW) refers to military operations exploiting the electromagnetic spectrum, and includes transmitting and receiving information encoded in electromagnetic fields. In order to interpret such information, effective sensing systems are of great importance. For EW applications, the radio frequency (RF) spectrum is specifically relevant. Traditional RF receivers and transmitters rely on antennas and associated electronic components, whose performance is fundamentally limited by constraints imposed by the laws of classical physics. Motivated by the fundamental limitations of classical technologies, quantum technology has emerged as a strategic research area in many countries, with applications in computing, communication and sensing, and could therefore be useful in EW applications in the future. This thesis aims to investigate and compare two quantum sensing approaches: Rydberg atombased electric field sensors and nitrogen-vacancy center magnetometers. The goal is to evaluate their sensing principles, fundamental limitations and potential competitiveness compared to classical RF receivers. The work combines a literature review of published research in order to understand the underlying quantum mechanical principles enabling electromagnetic field sensing, with analytical comparisons of sensitivity and detection range. Classical receiver performance was modeled using thermal-noise-limited sensitivity, while quantum sensor performance was estimated using reported sensitivities from literature. Detection range calculations were performed under simplified assumptions to illustrate the differences between conventional and atom-based sensing approaches. The results show that current quantum sensors do not yet surpass state-of-the-art classical receivers in raw sensitivity. However, they offer several unique characteristics, including intrinsic calibration, wide frequency tunability and the possibility of direct field-based measurements without conventional impedance matching. The comparison further highlights the fundamentally different noise mechanisms governing classical and quantum sensing systems. Overall, quantum sensing represents a promising emerging technology for electromagnetic field detection. Although significant technical challenges remain, continued advances may enable future quantum sensors to complement or partially replace conventional RF sensing technologies.
Quantum technology has been exploited to enable a large range of exciting new disciplines including quantum computing, quantum communication and quantum cryptography. Very recently, quantum technology was explored for fine-grained motion sensing and a new concept termed ``quantum wireless sensing'' was proposed. Compared to conventional wireless sensing whose sensing granularity is fundamentally limited by the thermal noise of RF receiver, the thermal noise of a quantum receiver is orders of magnitude smaller. In this article, instead of applying quantum wireless sensing to sense the motion of a target, we apply it to extract the inherent material characteristic of a target to realize fine-grained liquid recognition. By leveraging the unique capability of capturing RF signals in a wide frequency range with a single quantum receiver, we propose a novel double-ratio scheme to address the most critical challenges in liquid recognition, i.e., the measured liquid feature is not just dependent on liquid type but also dependent on other factors such as liquid volume, device-target distance, and container. We further leverage this unique wide frequency range property to hop multiple channels to improve the sensing accuracy and robustness. Comprehensive real-world experiments show that the proposed quantum-based sensing system is able to recognize 17 commonly seen liquids, including very similar ones (e.g., Pepsi and Coke) at an accuracy higher than 99.9%. For milk expiration monitoring, our system can achieve an accuracy of 99.0% for pH value measurements at a granularity of 0.1, which is much finer than that required for expiration monitoring.
The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.
Rydberg atomic quantum receivers (RAQRs) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on the creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on atom-light interactions relying on the so-called electromagnetically induced transparency (EIT) and Autler- Townes splitting (ATS) so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states facilitate an ultra-high sensitivity (~nv⁄cm/√Hz) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the principles and schemes of RAQRs. Then, we overview the state-of-the-art studies from both physics and communication societies. Furthermore, we conceive Rydberg atomic quantum single-input single-output (RAQ-SISO) and multiple-input multiple- output (RAQ-MIMO) schemes to facilitate the integration of RAQRs with classical wireless systems. Finally, we conclude with a set of potent research directions.