Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scientific Reports

Simulation of laser-induced tunnel ionization based on a curved waveguide

Arnon Ben levy, Amir Hen, Merav Kahn, Yoad Aharon, Tamar Levin, Noa Mazurski, Uriel Levy, Gilad Marcus

Published Aug 3, 2023• 3 citations
Publisher

Abstract

The problem of tunneling ionization and the associated questions of how long it takes for an electron to tunnel through the barrier, and what the tunneling rate has fascinated scientists for almost a century. In strong field physics, tunnel ionization plays an important role, and accurate knowledge of the time-dependent tunnel rate is of paramount importance. The Keldysh theory and other more advanced related theories are often used, but their accuracy is still controversial. In previous work, we suggested using a curved waveguide as a quantum simulator to simulate the tunnel ionization process. Here we implemented for the first time such a curved waveguide and observed the simulated tunneling ionization process. We compare our results with the theory.

DOI
10.1038/s41598-023-39142-1

Related papers

Tunneling Time, Exit Time and Exit Momentum in Strong Field Tunnel Ionization

Nicolas Teeny

Tunnel ionization belongs to the fundamental processes of atomic physics. It is still an open question when does the electron tunnel ionize and how long is the duration of tunneling. In this work we solve the time-dependent Schr{\\"o}dinger equation in one and two dimensions and use \\textit{ab initio} quantum calculations in order to answer these questions. Additionally, we determine the exit momentum of the tunnel ionized electron from first principles. We find out results that are different from the assumptions of the commonly employed two-step model, which assumes that the electron ionizes at the instant of electric field maximum with a zero momentum. After determining the quantum final momentum distribution of tunnel ionized electrons we show that the two-step model fails to predict the correct final momentum. Accordingly we suggest how to correct the two-step model. Furthermore, we determine the instant at which tunnel ionization starts, which turns out to be different from the instant usually assumed. From determining the instant at which it is most probable for the electron to enter the tunneling barrier and the instant at which it exits we determine the most probable time spent under the barrier. Moreover, we apply a quantum clock approach in order to determine the duration of tunnel ionization. From the quantum clock we determine an average tunneling time which is different in magnitude and origin with respect to the most probable tunneling time. By defining a probability distribution of tunneling times using virtual detectors we relate both methods and explain the apparent discrepancy. The results found have in general an effect on the interpretation of experiments that measure the spectra of tunnel ionized electrons, and specifically on the calibration of the so called attoclock experiments, because models with imprecise assumptions are usually employed in order to interpret experimental results.

•Jan 1, 2016•1 citation

Tunneling time in attosecond experiment for hydrogen atom

Ossama Kullie

Tunneling and tunneling time are hot debated and very interesting issues because of their fundamental role in the quantum mechanics. The measurement of the tunneling time in today's attosecond and strong field (low-frequency) experiments, despite its controversial discussion offers a fruitful opportunity to understand the time measurement and the role of time in quantum mechanics. In previous work Kullie (2015 Phys. Rev. A 92 , 052118), we suggested a model and derived a simple relation to calculate the tunneling time, which showed a good agreement with the experimental result for He-atom. In the present work we analyze and discuss our model considering the experimental result for H-atom, which is obtained recently by Satya Sainadh et al (2017 arXiv: 1707.05445 ). In the tunneling region, we find that our model shows a good agreement with their experimental result (similar to the He-atom in our previous work), and with the accompanied time-dependent Schrödiger equation simulations. However, Sainadh et al use a different picture of the tunneling, in which tunneling time becomes an imaginary quantity. Whereas our model represents a real tunneling time picture, precisely a delay time with respect to the ionization time at the atomic field strength. Moreover, even though the above-threshold-ionization is beyond the tunneling regime, we still see that the actual ionization time is related to our model. However, crucial points arise and keep some questions open especially on the experimental side.

Journal of Physics Communications•May 24, 2018•6 citations

Quantum tunnelling time at long wavelengths

Zheng Shu, Da-Wei Tian, Jing-Yu Zhang +3 more

Abstract Quantum tunnelling is a fundamental phenomenon in quantum physics, yet the question of how long it takes for a particle to tunnel through a barrier remains a topic of ongoing debate. Recent advances in attoclock experimental techniques in strong-field physics have renewed interest in this topic. While various definitions of tunneling time have been proposed, a consensus has yet to be reached. In this study, we adopt a definition of tunnelling time based on the ratio of the barrier width to the expected value of the velocity operator within the barrier. This approach reduces to the Büttiker-Landauer time ($\tau_{BL}$) in the case of an opaque barrier and offers a clear physical interpretation for very thin barriers, where $\tau_{BL}$ may not be well-defined. Additionally, by utilizing a virtual detector at the tunnel exit, we calculate the time delay between the peak of the electric field and the moment of ionization for long wavelengths ($\geq$6 $\mu$m). Our findings indicate that the time delay stabilizes around 190 as, remaining independent of the laser wavelength. Furthermore, through our quantum tunnelling time definition, this time delay can be interpreted as the time required for the electron to tunnel from a point within the barrier to the exit.

Chinese Physics B•Mar 12, 2026•0 citations

Salecker-Wigner-Peres quantum clock applied to strong-field tunnel ionization

Nicolas Teeny, Christoph H. Keitel, Heiko Bauke

The Salecker-Wigner-Peres quantum-clock approach is applied in order to determine the tunneling time of an electron in strong-field tunnel ionization via a time-dependent electric field. Our results show that the ionization of the electron takes a nonvanishing period of time. This tunneling time is of the order of the Keldysh time but strictly larger than the Keldysh time. Comparing the quantum-clock tunneling time to the mean tunneling time as obtained by the virtual-detector approach, one finds that these two complementary methods give very similar results. Due to the asymmetric distribution of the tunneling time, there is a nonnegligible discrepancy between the mean tunneling time and the most probable tunneling time.

arXiv:1608.02854•Aug 9, 2016•2 citations

First passage time of laser-driven tunneling

Aleksei M. Zheltikov

The notion of the first passage time is shown to offer a meaningful extension to quantum tunneling, providing a closed-integral-form analytical unification of the tunneling rate and the tunneling passage time. We demonstrate that, in suitable potential settings, the quantum first passage time, found as a solution to the Fokker-Planck and backward Kolmogorov's equations for the quantum probability density, recovers the hallmark results for the Kramers escape rate, the lifetime of tunneling quasi-stationary wave packets, leads to a classical, distance-over-speed passage time for a free-particle wave function, and offers useful insights into Keldysh's intimation on the electron barrier-traversal time in field-induced ionization.

Optics Letters•Aug 2, 2023•2 citations

Wavelength Dependent Tunneling Delay Time

Xiaolei Hao, Zheng Shu, Weidong Li +1 more

A clear consensus on how long it takes a particle to tunnel through a potential barrier has never been so urgently required, since the electron dynamics in strong-field ionization can be resolved on attosecond time-scale in experiment and the exact nature of the tunneling process is the key to trigger subsequent attosecond techniques. Here a general picture of tunneling time is suggested by introducing a quantum travel time, which is defined as the ratio of the travel distance to the expected value of the velocity operator under the barrier. Specially, if applied to rectangular barrier tunneling, it can retrieve the Büttiker-Landauer time $τ_{BL}$ in the case of an opaque barrier, and has a clear physical meaning in the case of a very thin barrier wherein $τ_{BL}$ can not be well defined. In the case of strong-field tunneling process, with the help of the newly defined time, the tunneling delay time measured by attoclock experiment can be interpreted as a travel time spent by the electron to tunnel from a point under the barrier to the tunnel exit. In addition, a peculiar oscillation structure in the wavelength dependence of tunneling delay time in deep tunneling regime is observed, which is beyond the scope of adiabatic tunneling picture. This oscillation structure can be attributed to the interference between the ground state tunneling channel and the excited states tunneling channels.

arXiv:1903.06897•Mar 16, 2019•0 citations
The problem of tunneling ionization and the associated questions of how long it takes for an electron to tunnel through the barrier, and what the tunneling rate has fascinated scientists for almost a century. In strong field physics, tunnel ionization plays an important role, and accurate knowledge of the time-dependent tunnel rate is of paramount importance. The Keldysh theory and other more advanced related theories are often used, but their accuracy is still controversial. In previous work, we suggested using a curved waveguide as a quantum simulator to simulate the tunnel ionization process. Here we implemented for the first time such a curved waveguide and observed the simulated tunneling ionization process. We compare our results with the theory.
Tunnel ionization belongs to the fundamental processes of atomic physics. It is still an open question when does the electron tunnel ionize and how long is the duration of tunneling. In this work we solve the time-dependent Schr{\\"o}dinger equation in one and two dimensions and use \\textit{ab initio} quantum calculations in order to answer these questions. Additionally, we determine the exit momentum of the tunnel ionized electron from first principles. We find out results that are different from the assumptions of the commonly employed two-step model, which assumes that the electron ionizes at the instant of electric field maximum with a zero momentum. After determining the quantum final momentum distribution of tunnel ionized electrons we show that the two-step model fails to predict the correct final momentum. Accordingly we suggest how to correct the two-step model. Furthermore, we determine the instant at which tunnel ionization starts, which turns out to be different from the instant usually assumed. From determining the instant at which it is most probable for the electron to enter the tunneling barrier and the instant at which it exits we determine the most probable time spent under the barrier. Moreover, we apply a quantum clock approach in order to determine the duration of tunnel ionization. From the quantum clock we determine an average tunneling time which is different in magnitude and origin with respect to the most probable tunneling time. By defining a probability distribution of tunneling times using virtual detectors we relate both methods and explain the apparent discrepancy. The results found have in general an effect on the interpretation of experiments that measure the spectra of tunnel ionized electrons, and specifically on the calibration of the so called attoclock experiments, because models with imprecise assumptions are usually employed in order to interpret experimental results.
Tunneling and tunneling time are hot debated and very interesting issues because of their fundamental role in the quantum mechanics. The measurement of the tunneling time in today's attosecond and strong field (low-frequency) experiments, despite its controversial discussion offers a fruitful opportunity to understand the time measurement and the role of time in quantum mechanics. In previous work Kullie (2015 Phys. Rev. A 92 , 052118), we suggested a model and derived a simple relation to calculate the tunneling time, which showed a good agreement with the experimental result for He-atom. In the present work we analyze and discuss our model considering the experimental result for H-atom, which is obtained recently by Satya Sainadh et al (2017 arXiv: 1707.05445 ). In the tunneling region, we find that our model shows a good agreement with their experimental result (similar to the He-atom in our previous work), and with the accompanied time-dependent Schrödiger equation simulations. However, Sainadh et al use a different picture of the tunneling, in which tunneling time becomes an imaginary quantity. Whereas our model represents a real tunneling time picture, precisely a delay time with respect to the ionization time at the atomic field strength. Moreover, even though the above-threshold-ionization is beyond the tunneling regime, we still see that the actual ionization time is related to our model. However, crucial points arise and keep some questions open especially on the experimental side.
Abstract Quantum tunnelling is a fundamental phenomenon in quantum physics, yet the question of how long it takes for a particle to tunnel through a barrier remains a topic of ongoing debate. Recent advances in attoclock experimental techniques in strong-field physics have renewed interest in this topic. While various definitions of tunneling time have been proposed, a consensus has yet to be reached. In this study, we adopt a definition of tunnelling time based on the ratio of the barrier width to the expected value of the velocity operator within the barrier. This approach reduces to the Büttiker-Landauer time (τBL\tau_{BL}τBL​) in the case of an opaque barrier and offers a clear physical interpretation for very thin barriers, where τBL\tau_{BL}τBL​ may not be well-defined. Additionally, by utilizing a virtual detector at the tunnel exit, we calculate the time delay between the peak of the electric field and the moment of ionization for long wavelengths ($\geq$6 μ\muμm). Our findings indicate that the time delay stabilizes around 190 as, remaining independent of the laser wavelength. Furthermore, through our quantum tunnelling time definition, this time delay can be interpreted as the time required for the electron to tunnel from a point within the barrier to the exit.
The Salecker-Wigner-Peres quantum-clock approach is applied in order to determine the tunneling time of an electron in strong-field tunnel ionization via a time-dependent electric field. Our results show that the ionization of the electron takes a nonvanishing period of time. This tunneling time is of the order of the Keldysh time but strictly larger than the Keldysh time. Comparing the quantum-clock tunneling time to the mean tunneling time as obtained by the virtual-detector approach, one finds that these two complementary methods give very similar results. Due to the asymmetric distribution of the tunneling time, there is a nonnegligible discrepancy between the mean tunneling time and the most probable tunneling time.
The notion of the first passage time is shown to offer a meaningful extension to quantum tunneling, providing a closed-integral-form analytical unification of the tunneling rate and the tunneling passage time. We demonstrate that, in suitable potential settings, the quantum first passage time, found as a solution to the Fokker-Planck and backward Kolmogorov's equations for the quantum probability density, recovers the hallmark results for the Kramers escape rate, the lifetime of tunneling quasi-stationary wave packets, leads to a classical, distance-over-speed passage time for a free-particle wave function, and offers useful insights into Keldysh's intimation on the electron barrier-traversal time in field-induced ionization.
A clear consensus on how long it takes a particle to tunnel through a potential barrier has never been so urgently required, since the electron dynamics in strong-field ionization can be resolved on attosecond time-scale in experiment and the exact nature of the tunneling process is the key to trigger subsequent attosecond techniques. Here a general picture of tunneling time is suggested by introducing a quantum travel time, which is defined as the ratio of the travel distance to the expected value of the velocity operator under the barrier. Specially, if applied to rectangular barrier tunneling, it can retrieve the Büttiker-Landauer time τBLτ_{BL}τBL​ in the case of an opaque barrier, and has a clear physical meaning in the case of a very thin barrier wherein τBLτ_{BL}τBL​ can not be well defined. In the case of strong-field tunneling process, with the help of the newly defined time, the tunneling delay time measured by attoclock experiment can be interpreted as a travel time spent by the electron to tunnel from a point under the barrier to the tunnel exit. In addition, a peculiar oscillation structure in the wavelength dependence of tunneling delay time in deep tunneling regime is observed, which is beyond the scope of adiabatic tunneling picture. This oscillation structure can be attributed to the interference between the ground state tunneling channel and the excited states tunneling channels.