Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Photonics

Tilt Measurement at the Quantum Cramer–Rao Bound Using a Higher-Order Hermite–Gaussian Mode

Li Zhi, Yijian Wang, Hengxin Sun, Kui Liu, Jiangrui Gao

Published May 17, 2023• 6 citations
Publisher

Abstract

The quantum Cramer–Rao bound (QCRB) provides an ultimate precision limit in parameter estimation. The sensitivity of spatial measurements can be improved by using the higher-order Hermite–Gaussian mode. However, to date, the QCRB-saturating tilt measurement has not been realized. Here, we experimentally demonstrate tilt measurements using a higher-order HG40 mode as the probe beam. Using the balanced homodyne detection with an optimal local beam, which involves the superposition of high-order HG30 and HG50 modes, we demonstrate the precision of the tilt measurement approaching the QCRB. The signal-to-noise ratio of the tilt measurement is enhanced by 9.2 dB compared with the traditional method using HG00 as the probe beam. This scheme is more practical and robust to losses, which has potential applications in areas such as laser interferometer gravitational-wave observatories and high-sensitivity atomic force microscopes.

DOI
10.3390/photonics10050584

Related papers

Improving phase sensitivity of a hybrid interferometer with the two-mode squeezed coherent state

Tao Shao, Pengxiang Ruan, Minyang Zhang +4 more

Abstract We investigate the enhancement of phase sensitivity of a nonlinear-linear hybrid interferometer with the input of the two-mode squeezed coherent state (TMSCS). With the TMSCS produced by four-wave mixing, the quantum Cramér-Rao bounds (QCRB) can beat the Heisenberg limit (HL). Under the phase matched conditions, the optimal phase sensitivity with the balanced homodyne detection measurement can beat the HL and approach QCRB. The effects of internal and external losses on the measurement accuracy are also discussed. The results demonstrate that the scheme is robustness against to internal losses and this protocol can resist external detection loss which is up to 39%. Our results improve the performance of hybrid interferometers and this scheme can find important practical applications in quantum metrology.

Physica Scripta•Sep 18, 2024•5 citations

Holevo Cramér−Rao bound for multi-parameter estimation in nonlinear interferometers

Mengyao Zhou, Hongmei Ma, L. Q. Chen +2 more

Due to the potential of quantum advantage to surpass the standard quantum limit (SQL), nonlinear interferometers have garnered significant attention from researchers in the field of precision measurement. However, many practical applications require multiparameter estimation. In this work, we discuss the precision limit of multi-parameter estimation of pure Gaussian states based on nonlinear interferometers, and derive the Holevo Cramér−Rao bound (HCRB) for the case where both modes undergo displacement estimation. Furthermore, we compare our analytical results with the quantum Cramér−Rao bound based on the symmetric logarithmic derivative (SLD-CRB), and with the result of the dual homodyne measurement. Through numerical analysis, we find that the HCRB equals the result of the dual homodyne measurement, whereas SLD-CRB is not saturable at small squeezed parameters. Therefore, this indicates that the HCRB is tight. Additionally, we provide intuitive analysis and visual representation of our numerical results in phase space.

arXiv:2502.02855•Frontiers of Physics•Jan 1, 2025•6 citations

Beyond the Quantum Cramér-Rao Bound

J. R. Hervas, Aaron Z. Goldberg, Ángel S. Sanz +3 more

The quantum Cramér-Rao bound (QCRB) stands as a cornerstone of quantum metrology. Yet, akin to its classical counterpart, it provides only local information and overlooks higher-order details. We leverage the theory of higher-order asymptotics to circumvent these issues, providing corrections to the performance of estimators beyond the QCRB. While the QCRB often yields a whole family of optimal states and several optimal measurements, our approach allows us to identify optimal states and measurements within the family that are otherwise equivalent according to the QCRB alone; these are requisite for optimal metrology before reaching the asymptotic limit. These results are especially pertinent when dealing with unitary processes.

Physical Review Letters•Jan 10, 2025•18 citations

Higher‐Order Spatially Squeezed Beam for Enhanced Spatial Measurements

Li Zhi, Hui Guo, Hongbo Liu +5 more

Abstract A scheme is proposed to realize high‐precision spatial measurement of laser beams beyond quantum limit using a novel quantum state called the order spatially squeezed state, which is the combination of a bright mode coherent state and squeezed vacuum mode state. An effective technique for the generation of a rectangular shape higher‐order mode squeezed light with a maximum mode order of 5 is experimentally demonstrated using a doubling resonated optical parametric amplifier. Furthermore, the fourth order tilt‐ and displacement‐squeezed beams are constructed and used to perform spatial tilt and displacement measurements, thereby improving the signal‐to‐noise ratio by 10 and 8.6 dB compared to the mode. The results indicate that high‐order spatially squeezed states enhance measurement precision beyond the shot noise limit and are more prominent in back‐action noise reduction. High‐precision spatial measurement has potential practical applications in high‐sensitivity atomic force microscope and super‐resolution quantum imaging.

Advanced Quantum Technologies•Sep 6, 2022•19 citations

Towards the ultimate limit in transmission estimation

Alberto M. Marino

The minimum possible uncertainty when estimating a parameter, in this case transmission, is bounded by the quantum Cramér-Rao bound (QCRB). This bound is independent of the measurement technique and as result can be used to quantify how close a measurement is to the optimal one for a given system and probing state, as an optimal measurement saturates the QCRB. The ability to perform transmission measurements through an optical system at the QCRB can lead to enhancements in the calibration of optimal states for interferometers, the characterization of high efficiency photodetectors, or the sensitivity of sensing devices based on transmission, such as plasmonic sensors or spectroscopy. We show theoretically that the ultimate sensitivity limit per photon in the estimation of transmission, achievable with Fock states or vacuum two-mode squeezed states (vTMSS), can be approached through the use of bright quantum states of light, such as bright single-mode squeezed states (bSMSS) or bright two-mode squeezed states (bTMSS). The use of bright quantum states has the advantage that they can be generated with a significantly larger number of photons, which leads to an absolute sensitivity that can be many orders of magnitude larger than the one achieved with Fock states or vTMSS. We identify a measurement strategy that saturates the QCRB for these bright quantum states and shown experimentally that transmission estimation at the QCRB can be achieved with bTMSS through optimized intensity difference measurements.

Optical and Quantum Sensing and Precision Metrology•Mar 4, 2021•0 citations

Saturating the quantum Cramér–Rao bound using LOCC

Sisi Zhou, Chang-Ling Zou, Liang Jiang

Abstract The quantum Cramér–Rao bound (QCRB) provides an ultimate precision limit allowed by quantum mechanics in parameter estimation. Given any quantum state dependent on a single parameter, there is always a positive-operator valued measurement (POVM) saturating the QCRB. However, the QCRB-saturating POVM cannot always be implemented efficiently, especially in multipartite systems. In this paper, we show that the POVM based on local operations and classical communication is QCRB-saturating for arbitrary pure states or rank-two mixed states with varying probability distributions over fixed eigenbasis. Local measurements without classical communication, however, is not QCRB-saturating in general.

arXiv:1809.06017•Quantum Science and Technology•Jan 30, 2020•29 citations
The quantum Cramer–Rao bound (QCRB) provides an ultimate precision limit in parameter estimation. The sensitivity of spatial measurements can be improved by using the higher-order Hermite–Gaussian mode. However, to date, the QCRB-saturating tilt measurement has not been realized. Here, we experimentally demonstrate tilt measurements using a higher-order HG40 mode as the probe beam. Using the balanced homodyne detection with an optimal local beam, which involves the superposition of high-order HG30 and HG50 modes, we demonstrate the precision of the tilt measurement approaching the QCRB. The signal-to-noise ratio of the tilt measurement is enhanced by 9.2 dB compared with the traditional method using HG00 as the probe beam. This scheme is more practical and robust to losses, which has potential applications in areas such as laser interferometer gravitational-wave observatories and high-sensitivity atomic force microscopes.
Abstract We investigate the enhancement of phase sensitivity of a nonlinear-linear hybrid interferometer with the input of the two-mode squeezed coherent state (TMSCS). With the TMSCS produced by four-wave mixing, the quantum Cramér-Rao bounds (QCRB) can beat the Heisenberg limit (HL). Under the phase matched conditions, the optimal phase sensitivity with the balanced homodyne detection measurement can beat the HL and approach QCRB. The effects of internal and external losses on the measurement accuracy are also discussed. The results demonstrate that the scheme is robustness against to internal losses and this protocol can resist external detection loss which is up to 39%. Our results improve the performance of hybrid interferometers and this scheme can find important practical applications in quantum metrology.
Due to the potential of quantum advantage to surpass the standard quantum limit (SQL), nonlinear interferometers have garnered significant attention from researchers in the field of precision measurement. However, many practical applications require multiparameter estimation. In this work, we discuss the precision limit of multi-parameter estimation of pure Gaussian states based on nonlinear interferometers, and derive the Holevo Cramér−Rao bound (HCRB) for the case where both modes undergo displacement estimation. Furthermore, we compare our analytical results with the quantum Cramér−Rao bound based on the symmetric logarithmic derivative (SLD-CRB), and with the result of the dual homodyne measurement. Through numerical analysis, we find that the HCRB equals the result of the dual homodyne measurement, whereas SLD-CRB is not saturable at small squeezed parameters. Therefore, this indicates that the HCRB is tight. Additionally, we provide intuitive analysis and visual representation of our numerical results in phase space.
The quantum Cramér-Rao bound (QCRB) stands as a cornerstone of quantum metrology. Yet, akin to its classical counterpart, it provides only local information and overlooks higher-order details. We leverage the theory of higher-order asymptotics to circumvent these issues, providing corrections to the performance of estimators beyond the QCRB. While the QCRB often yields a whole family of optimal states and several optimal measurements, our approach allows us to identify optimal states and measurements within the family that are otherwise equivalent according to the QCRB alone; these are requisite for optimal metrology before reaching the asymptotic limit. These results are especially pertinent when dealing with unitary processes.
Abstract A scheme is proposed to realize high‐precision spatial measurement of laser beams beyond quantum limit using a novel quantum state called the order spatially squeezed state, which is the combination of a bright mode coherent state and squeezed vacuum mode state. An effective technique for the generation of a rectangular shape higher‐order mode squeezed light with a maximum mode order of 5 is experimentally demonstrated using a doubling resonated optical parametric amplifier. Furthermore, the fourth order tilt‐ and displacement‐squeezed beams are constructed and used to perform spatial tilt and displacement measurements, thereby improving the signal‐to‐noise ratio by 10 and 8.6 dB compared to the mode. The results indicate that high‐order spatially squeezed states enhance measurement precision beyond the shot noise limit and are more prominent in back‐action noise reduction. High‐precision spatial measurement has potential practical applications in high‐sensitivity atomic force microscope and super‐resolution quantum imaging.
The minimum possible uncertainty when estimating a parameter, in this case transmission, is bounded by the quantum Cramér-Rao bound (QCRB). This bound is independent of the measurement technique and as result can be used to quantify how close a measurement is to the optimal one for a given system and probing state, as an optimal measurement saturates the QCRB. The ability to perform transmission measurements through an optical system at the QCRB can lead to enhancements in the calibration of optimal states for interferometers, the characterization of high efficiency photodetectors, or the sensitivity of sensing devices based on transmission, such as plasmonic sensors or spectroscopy. We show theoretically that the ultimate sensitivity limit per photon in the estimation of transmission, achievable with Fock states or vacuum two-mode squeezed states (vTMSS), can be approached through the use of bright quantum states of light, such as bright single-mode squeezed states (bSMSS) or bright two-mode squeezed states (bTMSS). The use of bright quantum states has the advantage that they can be generated with a significantly larger number of photons, which leads to an absolute sensitivity that can be many orders of magnitude larger than the one achieved with Fock states or vTMSS. We identify a measurement strategy that saturates the QCRB for these bright quantum states and shown experimentally that transmission estimation at the QCRB can be achieved with bTMSS through optimized intensity difference measurements.
Abstract The quantum Cramér–Rao bound (QCRB) provides an ultimate precision limit allowed by quantum mechanics in parameter estimation. Given any quantum state dependent on a single parameter, there is always a positive-operator valued measurement (POVM) saturating the QCRB. However, the QCRB-saturating POVM cannot always be implemented efficiently, especially in multipartite systems. In this paper, we show that the POVM based on local operations and classical communication is QCRB-saturating for arbitrary pure states or rank-two mixed states with varying probability distributions over fixed eigenbasis. Local measurements without classical communication, however, is not QCRB-saturating in general.