Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Advanced Quantum Technologies

Higher‐Order Spatially Squeezed Beam for Enhanced Spatial Measurements

Li Zhi, Hui Guo, Hongbo Liu, Jiaming Li, Hengxin Sun, Rongguo Yang, Kui Liu, Jiangrui Gao

Published Sep 6, 2022• 19 citations
Publisher

Abstract

Abstract A scheme is proposed to realize high‐precision spatial measurement of laser beams beyond quantum limit using a novel quantum state called the order spatially squeezed state, which is the combination of a bright mode coherent state and squeezed vacuum mode state. An effective technique for the generation of a rectangular shape higher‐order mode squeezed light with a maximum mode order of 5 is experimentally demonstrated using a doubling resonated optical parametric amplifier. Furthermore, the fourth order tilt‐ and displacement‐squeezed beams are constructed and used to perform spatial tilt and displacement measurements, thereby improving the signal‐to‐noise ratio by 10 and 8.6 dB compared to the mode. The results indicate that high‐order spatially squeezed states enhance measurement precision beyond the shot noise limit and are more prominent in back‐action noise reduction. High‐precision spatial measurement has potential practical applications in high‐sensitivity atomic force microscope and super‐resolution quantum imaging.

DOI
10.1002/qute.202200055

Related papers

Precision enhancement in quantum spatial measurement by squeezing-assisted weak-value amplification

ChaoXia Zhang, Yongchao Chen, Gang Chen +5 more

Precision enhancement is demonstrated in an optical spatial measurement based on a weak-value amplification (WVA) system and splitlike detection, by injecting a ${\mathrm{TEM}}_{10}$ squeezed vacuum beam. We have experimentally realized high-precision optical spatial measurement beyond the shot-noise limit by using squeezing-assisted WVA. Based on the WVA technique, which can amplify the signal by increasing the number of photons that are injected into the interferometer, squeezed-beam injection can reduce the noise level and can further improve the signal-to-noise ratio (SNR). As a result, an SNR improvement of 2 dB, i.e., 1.3 times precision enhancement, can be achieved, and the obtained displacement and tilt sensitivity are $4.96\phantom{\rule{0.2em}{0ex}}\mathrm{fm}/\sqrt{\text{Hz}}$ and $0.39\phantom{\rule{0.2em}{0ex}}\mathrm{prad}/\sqrt{\text{Hz}}$, respectively, by using a 2-dB squeezed-beam injection and 2.6% postselection probability in the WVA process. Our work provides an effective method to accomplish higher precision in quantum spatial measurement, which has potential applications in gravitational wave interferometer calibration, super-resolution quantum imaging, etc.

arXiv:2311.16622•Physical Review Applied•Nov 25, 2024•8 citations

Quantum precision measurement based on squeezed light

Sun Heng-Xin, Liu Kui, Junxiang Zhang +1 more

According to the Heisenberg uncertainty principle, the precision of any physical quantity measurement is limited by quantum fluctuation in general, which leads to the so-called standard quantum limit (SQL). The SQL can be beaten by using squeezed light, hence enhancing the measurement accuracy. Squeezed light is a typical nonclassical light, it exhibits reduced noise in one quadrature component. Since Caves proposed the scheme of phase measurement enhancement with squeezing, squeezed light has been used to enhance measurement precision in many areas. This review focuses on the following four kinds of precision measurements based on squeezed light: the measurements of relative phase, small lateral displacement and tilt, magnetic field, and clock synchronization. For all of these measurements, vacuum squeezing has been used to enhance measurement precision, while the types of squeezing (squeezing angle, transverse mode, polarization etc.) are different. For phase measurement, quadrature squeezing is injected into the conventionally unused input port of Mach-Zehnder interferometer (MZI) or Michelson interferometer (MI). For displacement or tilt measurement, a vacuum squeezing beam of a special transverse mode is coupled into an intense coherent beam, yielding a spatial-squeezed light whose transverse position or tilt angle noise is lower than that of a classical light beam. Based on the Faraday effect of polarization rotation, the magnetic field can be detected precisely. The precision can be increased further by using the polarization squeezing. The polarization squeezing can be generated by coupling two orthogonal polarized beams together, a coherent beam and a vacuum squeezed beam. Various polarization squeezing can be illustrated on the Poincaré sphere. Finally, in the clock synchronization based on the optical frequency comb, squeezed light can be used to enhance the time measurement precision. A theoretical scheme with multimode squeezing of supermode (a kind of mode describing the frequency mode of a pulse laser beam) is introduced. The squeezing has extensively been applied into the quantum precision measurements such as gravitational wave detection as well as biological measurement and will play a more important role in the near future.

Acta Physica Sinica•Jan 1, 2015•13 citations

Experimental Demonstration of a Displacement Measurement of an Optical Beam beyond the Quantum Noise Limit

Hengxin Sun, Zunlong Liu, Kui Liu +3 more

We experimentally generate a spatially squeezed light beam and realize a small-displacement measurement beyond the quantum noise limit with this squeezed light. Moreover, we measure about −2.2±0.2 dB spatial squeezing and reduce the minimum measurable displacement from 1.17 Å to 0.99 Å with the signal-to-noise ratio normalized to 1.

Chinese Physics Letters•Aug 1, 2014•15 citations

Observation of Squeezed States of Light in Higher-Order Hermite-Gaussian Modes with a Quantum Noise Reduction of up to 10 dB

J. Heinze, B. Willke, H. Vahlbruch

Mirror thermal noise will be a main limitation for the sensitivities of the next-generation ground-based gravitational-wave detectors (Einstein Telescope and Cosmic Explorer) at signal frequencies around 100 Hz. Using a higher-order spatial laser mode instead of the fundamental mode is one proposed method to further mitigate mirror thermal noise. In the current detectors, quantum noise is successfully reduced by the injection of squeezed vacuum states. The operation in a higher-order mode would then require the efficient generation of squeezed vacuum states in this mode to maintain a high quantum noise reduction. In our setup, we generate continuous-wave squeezed states at a wavelength of 1064 nm in the fundamental and three higher-order Hermite-Gaussian modes up to a mode order of 6 using a type-I optical parametric amplifier. We present a significant milestone with a quantum noise reduction of up to 10 dB at a measurement frequency of 4 MHz in the higher-order modes and pave the way for their usage in future gravitational-wave detectors as well as in other quantum noise limited experiments.

Physical Review Letters•Feb 25, 2022•29 citations

Surpassing the Standard Quantum Limit for Optical Imaging Using Nonclassical Multimode Light

Nicolas Treps, Ulrik L. Andersen, B. C. Buchler +4 more

Using continuous wave superposition of spatial modes, we demonstrate experimentally displacement measurement of a light beam below the standard quantum limit. Multimode squeezed light is obtained by mixing a vacuum squeezed beam and a coherent beam that are spatially orthogonal. Although the resultant beam is not squeezed, it is shown to have strong internal spatial correlations. We show that the position of such a light beam can be measured using a split detector with an increased precision compared to a classical beam. This method can be used to improve the sensitivity of small displacement measurements.

arXiv:quant-ph/0204017•Physical Review Letters•May 3, 2002•236 citations

Quantum metrology with parametric amplifier-based photon correlation interferometers

Florian Hudelist, Jia Kong, Cunjin Liu +3 more

Conventional interferometers usually utilize beam splitters for wave splitting and recombination. These interferometers are widely used for precision measurement. Their sensitivity for phase measurement is limited by the shot noise, which can be suppressed with squeezed states of light. Here we study a new type of interferometer in which the beam splitting and recombination elements are parametric amplifiers. We observe an improvement of 4.1±0.3 dB in signal-to-noise ratio compared with a conventional interferometer under the same operating condition, which is a 1.6-fold enhancement in rms phase measurement sensitivity beyond the shot noise limit. The improvement is due to signal enhancement. Combined with the squeezed state technique for shot noise suppression, this interferometer promises further improvement in sensitivity. Furthermore, because nonlinear processes are involved in this interferometer, we can couple a variety of different waves and form new types of hybrid interferometers, opening a door for many applications in metrology. Interferometers play a key role in precision measurements and metrology. Here, the authors demonstrate a new type of interferometer that replaces the standard beam splitter elements with parametric amplifiers, which provides enhanced performance compared with a Mach–Zehnder interferometer.

Nature Communications•Jan 29, 2014•432 citations
Abstract A scheme is proposed to realize high‐precision spatial measurement of laser beams beyond quantum limit using a novel quantum state called the order spatially squeezed state, which is the combination of a bright mode coherent state and squeezed vacuum mode state. An effective technique for the generation of a rectangular shape higher‐order mode squeezed light with a maximum mode order of 5 is experimentally demonstrated using a doubling resonated optical parametric amplifier. Furthermore, the fourth order tilt‐ and displacement‐squeezed beams are constructed and used to perform spatial tilt and displacement measurements, thereby improving the signal‐to‐noise ratio by 10 and 8.6 dB compared to the mode. The results indicate that high‐order spatially squeezed states enhance measurement precision beyond the shot noise limit and are more prominent in back‐action noise reduction. High‐precision spatial measurement has potential practical applications in high‐sensitivity atomic force microscope and super‐resolution quantum imaging.
Precision enhancement is demonstrated in an optical spatial measurement based on a weak-value amplification (WVA) system and splitlike detection, by injecting a TEM10{\mathrm{TEM}}_{10}TEM10​ squeezed vacuum beam. We have experimentally realized high-precision optical spatial measurement beyond the shot-noise limit by using squeezing-assisted WVA. Based on the WVA technique, which can amplify the signal by increasing the number of photons that are injected into the interferometer, squeezed-beam injection can reduce the noise level and can further improve the signal-to-noise ratio (SNR). As a result, an SNR improvement of 2 dB, i.e., 1.3 times precision enhancement, can be achieved, and the obtained displacement and tilt sensitivity are 4.96fm/Hz4.96\phantom{\rule{0.2em}{0ex}}\mathrm{fm}/\sqrt{\text{Hz}}4.96fm/Hz​ and 0.39prad/Hz0.39\phantom{\rule{0.2em}{0ex}}\mathrm{prad}/\sqrt{\text{Hz}}0.39prad/Hz​, respectively, by using a 2-dB squeezed-beam injection and 2.6% postselection probability in the WVA process. Our work provides an effective method to accomplish higher precision in quantum spatial measurement, which has potential applications in gravitational wave interferometer calibration, super-resolution quantum imaging, etc.
According to the Heisenberg uncertainty principle, the precision of any physical quantity measurement is limited by quantum fluctuation in general, which leads to the so-called standard quantum limit (SQL). The SQL can be beaten by using squeezed light, hence enhancing the measurement accuracy. Squeezed light is a typical nonclassical light, it exhibits reduced noise in one quadrature component. Since Caves proposed the scheme of phase measurement enhancement with squeezing, squeezed light has been used to enhance measurement precision in many areas. This review focuses on the following four kinds of precision measurements based on squeezed light: the measurements of relative phase, small lateral displacement and tilt, magnetic field, and clock synchronization. For all of these measurements, vacuum squeezing has been used to enhance measurement precision, while the types of squeezing (squeezing angle, transverse mode, polarization etc.) are different. For phase measurement, quadrature squeezing is injected into the conventionally unused input port of Mach-Zehnder interferometer (MZI) or Michelson interferometer (MI). For displacement or tilt measurement, a vacuum squeezing beam of a special transverse mode is coupled into an intense coherent beam, yielding a spatial-squeezed light whose transverse position or tilt angle noise is lower than that of a classical light beam. Based on the Faraday effect of polarization rotation, the magnetic field can be detected precisely. The precision can be increased further by using the polarization squeezing. The polarization squeezing can be generated by coupling two orthogonal polarized beams together, a coherent beam and a vacuum squeezed beam. Various polarization squeezing can be illustrated on the Poincaré sphere. Finally, in the clock synchronization based on the optical frequency comb, squeezed light can be used to enhance the time measurement precision. A theoretical scheme with multimode squeezing of supermode (a kind of mode describing the frequency mode of a pulse laser beam) is introduced. The squeezing has extensively been applied into the quantum precision measurements such as gravitational wave detection as well as biological measurement and will play a more important role in the near future.
Mirror thermal noise will be a main limitation for the sensitivities of the next-generation ground-based gravitational-wave detectors (Einstein Telescope and Cosmic Explorer) at signal frequencies around 100 Hz. Using a higher-order spatial laser mode instead of the fundamental mode is one proposed method to further mitigate mirror thermal noise. In the current detectors, quantum noise is successfully reduced by the injection of squeezed vacuum states. The operation in a higher-order mode would then require the efficient generation of squeezed vacuum states in this mode to maintain a high quantum noise reduction. In our setup, we generate continuous-wave squeezed states at a wavelength of 1064 nm in the fundamental and three higher-order Hermite-Gaussian modes up to a mode order of 6 using a type-I optical parametric amplifier. We present a significant milestone with a quantum noise reduction of up to 10 dB at a measurement frequency of 4 MHz in the higher-order modes and pave the way for their usage in future gravitational-wave detectors as well as in other quantum noise limited experiments.
Using continuous wave superposition of spatial modes, we demonstrate experimentally displacement measurement of a light beam below the standard quantum limit. Multimode squeezed light is obtained by mixing a vacuum squeezed beam and a coherent beam that are spatially orthogonal. Although the resultant beam is not squeezed, it is shown to have strong internal spatial correlations. We show that the position of such a light beam can be measured using a split detector with an increased precision compared to a classical beam. This method can be used to improve the sensitivity of small displacement measurements.
Conventional interferometers usually utilize beam splitters for wave splitting and recombination. These interferometers are widely used for precision measurement. Their sensitivity for phase measurement is limited by the shot noise, which can be suppressed with squeezed states of light. Here we study a new type of interferometer in which the beam splitting and recombination elements are parametric amplifiers. We observe an improvement of 4.1±0.3 dB in signal-to-noise ratio compared with a conventional interferometer under the same operating condition, which is a 1.6-fold enhancement in rms phase measurement sensitivity beyond the shot noise limit. The improvement is due to signal enhancement. Combined with the squeezed state technique for shot noise suppression, this interferometer promises further improvement in sensitivity. Furthermore, because nonlinear processes are involved in this interferometer, we can couple a variety of different waves and form new types of hybrid interferometers, opening a door for many applications in metrology. Interferometers play a key role in precision measurements and metrology. Here, the authors demonstrate a new type of interferometer that replaces the standard beam splitter elements with parametric amplifiers, which provides enhanced performance compared with a Mach–Zehnder interferometer.