Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Systems of Signals Generating and Processing in the Field of on Board Communications

Development of a Metrological System for Measuring the Characteristics of Single Photon Detectors Based on an Educational Platform EMQOS 1.0

Joscelin Rabenandrasana, A. V. Bachus, T. V. Kazieva, N. S. Trofimov, M. V. Boltanskii

Published Mar 14, 2023• 9 citations
Publisher

Abstract

The article considers a system for measuring the parameters of single photon detectors implemented on the EMQOS 1.0 platform. A description of the experimental setup and its main parameters is presented. The possibility of using the assembled experimental stand for the metrology of photodetectors in the field of telecommunication wavelengths is shown. The results of testing a single photon detector designed for operation in quantum communication systems are presented.

DOI
10.1109/ieeeconf56737.2023.10092001

Related papers

Evaluation of the Operational Parameters of Single-Photon Detectors in Quantum Key Distribution Devices

Vladimir Zavodilenko, Anton Losev, Alexandr A. Filyaev +1 more

Abstract Automated measuring stand (AMS) for evaluation of the operational parameters of single-photon detectors (SPD) has been developed together with the software that implements the method of evaluating SPD efficiency parameters from the experimental data measured with AMS. We present graphical interface of the software, which allows generating recommendations for configuring operation mode of the detector and its subsequent integration into the quantum key distribution (QKD) system. Successful tests of the results of our work enable their implementation in the SPD production process.

Optoelectronics Instrumentation and Data Processing•Feb 1, 2023•0 citations

Software for measuring parameters of single photon detectors at a modular research quantum key distribution setup

D. E. Kashirskiĭ, Meerimai Mazhitova

Abstract This article considers the issue of developing software for automated measurement of single photon detectors parameters at a modular research quantum key distribution setup. Using the developed software, a technique for measuring single photon detector parameters was tested. The dependences of the parameters on the pulse repetition rate, the degree of attenuation of laser radiation, and the duration of one measurement are analyzed.

Journal of Physics Conference Series•Dec 1, 2020•0 citations

Quantum Efficiency of a Single Photon Detector Experimental Estimation

G. S. Grishkin, Ya. A. Ryvkina, Vasily I. Kazakov +1 more

The dependence of the quantum efficiency of the single photon detector as a function of the average number of photons in the laser pulse is investigated. A method of estimation of quantum efficiency of a single photon detector in the operating mode of a quantum key distribution system operating according to the BB84 protocol is proposed. On the basis of an academic installation of the key quantum distribution system EMQOS 1.0 of the company QRate the experimental researches are executed and dependences of quantum efficiency of the detector of single photons from an average number of photons falling on the detector at various lengths of pulse sequences are received. Practical recommendations are given for the use of the proposed technique to estimate the quantum efficiency of single photon detectors.

Wave Electronics and its Application in Information and Telecommunication Systems (WECONF)•May 29, 2023•0 citations

Key parameters of single photon receivers and sources for fi ber-optic quantum cryptography systems: parameter analysis and measurement methods

Stepan B. Bychkov, Ivan S. Korolev, С. В. Тихомиров

The development of fi ber-optic communication and data transmission systems gives rise to a number of new challenges, among which information protection against unauthorized access is of particular relevance. In response to this need, quantum cryptography has emerged – optical cryptographic systems with quantum key distribution. Such systems protect communication channels by encrypting data with a one-time secret key. The theoretical foundation guaranteeing secure key transmission relies on the Heisenberg uncertainty principle and the no-cloning theorem for quantum states of elementary particles. However, real-world quantum cryptography systems exhibit vulnerabilities stemming from imperfections in their components. Single photon detectors and single photon sources are critical elements of quantum key distribution systems. This work analyses the main types of attacks on quantum cryptography equipment and identifi es the key parameters of single photon sources and single photon detectors. Knowledge of their actual values can be crucial for proving a system’s resilience against attacks. Additionally, the paper describes the equipment and methods used to study single-photon sources. The study also describes the method and results of investigating the quantum effi ciency and false trigger probabilities of gated single-photon detectors with fi ber input. The described measurement methods are harmonized with the recommendations of the European Telecommunications Standards Institute. Together, the described measurement techniques and setups enable the assessment of single photon source and detector parameters during expert evaluation of quantum cryptography system vulnerabilities. The paper concludes with a call for the establishment of a reference database to support metrological assurance of key parameters for single photon sources and receivers, in order to advance quantum cryptography systems

Izmeritel`naya Tekhnika•May 11, 2026•0 citations

Assembly and characterization of single-photon detectors for quantum networks

Enric Solé Aznar

The use of quantum technologies has risen drastically in the last decades, offering an enhancement in terms of the technological capabilities available nowadays. Found in this field of research, quantum communications based on the transmission of single photons offer new approaches to redefine the use of protocols and devices for specialised applications. As a final result, this leads to the accomplishment of long-range quantum networks with terrestrial and satellite-based communications set to establish a new scale of Telecommunication applications. Within these kinds of applications, this project focuses on the assembly of a single-photon detector using a photodiode of type Single-Photon Avalanche Diode (SPAD), essential device to define the level of performance of any quantum communication system. To carry this out, the system is assembled around its centre piece, an Excelitas APD operated in Geiger mode above its breakdown voltage. The electronic circuit that drives the photodiode is characterised to work with its adjusted bias voltage, its dedicated temperature management system and its active quenching circuit to detect pulses with certainty and precision. The final version of the project is adjusted to work in the 1300nm and 1500nm operating wavelengths as the photodiode used is formed by an InGaAs/InP semiconductor structure. Working on top of the original circuit provided initially, the experimental measurements obtained in the course of the project prove that the design modifications implemented have improved the functioning of the whole system. The main achievements accomplished encompass the generation of pulses for photon detection at 20kHz, the reduction of electromagnetic interferences by a factor 40, the enhancement of the manipulated signals in the circuit by a factor of tens, and the correct management of the SPAD temperature to maintain a fixed value of dark counts for a long time.

•Jul 1, 2026•0 citations

Designing a special light source with predetermined number of photons

Dániel Oszetzky, A. Czitrovszky, Alexander V. Sergienko

We designed a special light source generating a pre-determined number of photons taking advantage of our previous experimental results and calculations that establish a new approach to the calibration of photodetectors and determination of the absolute value of quantum efficiency of photon-counting photomultipliers using a single detector and entangled-photon pairs. This source is capable of generating a known number of photons of specified wavelength, in specified direction, and polarization for high-accuracy optical measurements (optical metrology) at the ultra-low intensities. The design and the modeling have been performed taking into account the main time characteristics of electronics, efficiency of detectors, parameters of the signal, losses, etc. The data evaluation system has been designed and tested; the assembly of the experimental set-up has been performed. Main parts of the optical and electronic system (generation of photon pairs, detectors, Pockels cells, etc.) have been tested. Such light source can be successfully applied in different areas of optical metrology, especially in photometry.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 3, 2004•5 citations
The article considers a system for measuring the parameters of single photon detectors implemented on the EMQOS 1.0 platform. A description of the experimental setup and its main parameters is presented. The possibility of using the assembled experimental stand for the metrology of photodetectors in the field of telecommunication wavelengths is shown. The results of testing a single photon detector designed for operation in quantum communication systems are presented.
Abstract Automated measuring stand (AMS) for evaluation of the operational parameters of single-photon detectors (SPD) has been developed together with the software that implements the method of evaluating SPD efficiency parameters from the experimental data measured with AMS. We present graphical interface of the software, which allows generating recommendations for configuring operation mode of the detector and its subsequent integration into the quantum key distribution (QKD) system. Successful tests of the results of our work enable their implementation in the SPD production process.
The dependence of the quantum efficiency of the single photon detector as a function of the average number of photons in the laser pulse is investigated. A method of estimation of quantum efficiency of a single photon detector in the operating mode of a quantum key distribution system operating according to the BB84 protocol is proposed. On the basis of an academic installation of the key quantum distribution system EMQOS 1.0 of the company QRate the experimental researches are executed and dependences of quantum efficiency of the detector of single photons from an average number of photons falling on the detector at various lengths of pulse sequences are received. Practical recommendations are given for the use of the proposed technique to estimate the quantum efficiency of single photon detectors.
The development of fi ber-optic communication and data transmission systems gives rise to a number of new challenges, among which information protection against unauthorized access is of particular relevance. In response to this need, quantum cryptography has emerged – optical cryptographic systems with quantum key distribution. Such systems protect communication channels by encrypting data with a one-time secret key. The theoretical foundation guaranteeing secure key transmission relies on the Heisenberg uncertainty principle and the no-cloning theorem for quantum states of elementary particles. However, real-world quantum cryptography systems exhibit vulnerabilities stemming from imperfections in their components. Single photon detectors and single photon sources are critical elements of quantum key distribution systems. This work analyses the main types of attacks on quantum cryptography equipment and identifi es the key parameters of single photon sources and single photon detectors. Knowledge of their actual values can be crucial for proving a system’s resilience against attacks. Additionally, the paper describes the equipment and methods used to study single-photon sources. The study also describes the method and results of investigating the quantum effi ciency and false trigger probabilities of gated single-photon detectors with fi ber input. The described measurement methods are harmonized with the recommendations of the European Telecommunications Standards Institute. Together, the described measurement techniques and setups enable the assessment of single photon source and detector parameters during expert evaluation of quantum cryptography system vulnerabilities. The paper concludes with a call for the establishment of a reference database to support metrological assurance of key parameters for single photon sources and receivers, in order to advance quantum cryptography systems
The use of quantum technologies has risen drastically in the last decades, offering an enhancement in terms of the technological capabilities available nowadays. Found in this field of research, quantum communications based on the transmission of single photons offer new approaches to redefine the use of protocols and devices for specialised applications. As a final result, this leads to the accomplishment of long-range quantum networks with terrestrial and satellite-based communications set to establish a new scale of Telecommunication applications. Within these kinds of applications, this project focuses on the assembly of a single-photon detector using a photodiode of type Single-Photon Avalanche Diode (SPAD), essential device to define the level of performance of any quantum communication system. To carry this out, the system is assembled around its centre piece, an Excelitas APD operated in Geiger mode above its breakdown voltage. The electronic circuit that drives the photodiode is characterised to work with its adjusted bias voltage, its dedicated temperature management system and its active quenching circuit to detect pulses with certainty and precision. The final version of the project is adjusted to work in the 1300nm and 1500nm operating wavelengths as the photodiode used is formed by an InGaAs/InP semiconductor structure. Working on top of the original circuit provided initially, the experimental measurements obtained in the course of the project prove that the design modifications implemented have improved the functioning of the whole system. The main achievements accomplished encompass the generation of pulses for photon detection at 20kHz, the reduction of electromagnetic interferences by a factor 40, the enhancement of the manipulated signals in the circuit by a factor of tens, and the correct management of the SPAD temperature to maintain a fixed value of dark counts for a long time.
We designed a special light source generating a pre-determined number of photons taking advantage of our previous experimental results and calculations that establish a new approach to the calibration of photodetectors and determination of the absolute value of quantum efficiency of photon-counting photomultipliers using a single detector and entangled-photon pairs. This source is capable of generating a known number of photons of specified wavelength, in specified direction, and polarization for high-accuracy optical measurements (optical metrology) at the ultra-low intensities. The design and the modeling have been performed taking into account the main time characteristics of electronics, efficiency of detectors, parameters of the signal, losses, etc. The data evaluation system has been designed and tested; the assembly of the experimental set-up has been performed. Main parts of the optical and electronic system (generation of photon pairs, detectors, Pockels cells, etc.) have been tested. Such light source can be successfully applied in different areas of optical metrology, especially in photometry.