Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Antiresonant Fabry-Pérot cavity with ultralow finesse

Tiantian Shi, Jianxiang Miao, Jia Zhang, Jingbiao Chen

Published Feb 22, 2023• 6 citations
Publisher

Abstract

The exact expressions of finesse and full width at half maximum (FWHM) of the Airy distribution of a Fabry-P\'erot (FP) resonator are derived, which solves the breakdown problem at ultralow reflectivity in traditional formulas. We demonstrate that, when the cavity-mirror reflectivity $R\ensuremath{\rightarrow}0$, the FWHM approaches half of the free spectral range rather than infinity; moreover, the cavity finesse $\mathcal{F}$ approaches 2 rather than zero. These expressions are useful for the development of bad-cavity lasers, such as the four-level active optical clock based on the strong atomic transition of cesium. Also, the exact expressions of the FWHM and finesse of the reflection distribution composed of reflected mode profiles are derived, which separately intersect with that of the Airy one at $R=0$. In addition, the characteristics of an antiresonant cavity, the frequency of which is exactly at the center of two adjacent resonant cavity modes, are analyzed. It is demonstrated that at the resonant and antiresonant frequencies the enhancement and inhibition of intracavity light intensity caused by the FP cavity are symmetrical in the logarithmic view. Furthermore, we provide a universal expression of the cavity-enhancement factor rather than the classical representation of ``$\text{2}\mathcal{F}/\phantom{\text{2}\mathcal{F}\ensuremath{\pi}}\phantom{\rule{0.0pt}{0ex}}\ensuremath{\pi}$,'' which is inadequate for the high-loss cavity because the cavity-enhancement factor should naturally reach 1 when $R\ensuremath{\rightarrow}0$. Finally, we extend the application of the antiresonant cavity to an inhibited laser, the frequency of which has a stronger suppression effect on the cavity-length thermal noise than the traditional resonant laser.

DOI
10.1103/physreva.107.023517

Related papers

High-finesse fiber Fabry–Perot cavities: stabilization and mode matching analysis

J. Gallego, S. Ghosh, Seyed Khalil Alavi +4 more

Fiber Fabry–Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry–Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound–Drever–Hall locking technique is compared to a novel rigid cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. Furthermore, we present a general analysis of the mode matching problem in fiber Fabry–Perot cavities, which explains the asymmetry in their reflective line shapes and has important implications for the optimal alignment of the fiber resonators. Finally, we discuss the issue of fiber-generated background photons. We expect that our results contribute toward the integration of high-finesse fiber Fabry–Perot cavities into compact and robust quantum-enabled devices in the future.

arXiv:1508.05289•Applied Physics B•Mar 1, 2016•79 citations

Mirror Reflectivity and Photon Storage Time in a Fabry-Perot Cavity for Single Photons

William Alexander Aldred

A single photon that enters a Fabry-Perot resonator leaves again after a dwell time set by how often it reflects and how much light escapes at each reflection. That dwell time decides whether the photon can be held long enough for a control operation, a heralding check, or a synchronisation delay, and it also sets the spectral width the source must match. This study computes the quantities that follow from stated assumptions for a symmetric two-mirror Fabry-Perot cavity of length 0.05 m, wavelength 780 nm, with a fixed additional round-trip loss of 0.002 in intensity, using the relations set out in the Methods. The headline results are finesse at R 0.99 = 260.7, lifetime at R 0.99 s = 1.384e-08, linewidth at R 0.99 Hz = 1.150e+07, finesse at R 0.9995 = 1.256e+03, lifetime at R 0.9995 s = 6.666e-08. Further computed values are saturation ratio lifetime = 4.817. The central question is stated as follows: How much storage time, spectral width and round-trip loss follow from a stated mirror reflectivity for a five-centimetre resonator at 780 nm, and at what reflectivity does further coating improvement stop buying useful time because other losses dominate? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Laboratory resonators of this size are commonly quoted with finesse values from a few hundred for coated optics to well above one hundred thousand for supermirror coatings, so a sweep across that interval tests both ordinary and demanding coatings. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs.

•Nov 12, 2026•0 citations

Novel characterization of an optical cavity with small mode volume

Moonjoo Lee, Myunghun Kim, Jungsoo Hong +4 more

We characterize a high-finesse Fabry-Perot resonator for coupling with single neutral atoms. Our cavity consists of two mirrors with different reflectivities: One has minimal optical loss, and the other high transmission loss where more than 90% of the intracavity photons would be emitted. Cavity finesse, birefringent effects, and mechanical resonances are measured using the lasers at 780, 782, and 795 nm. In order to obtain cavity geometric parameters, we drive the adjacent longitudinal or transverse modes with two lasers simultaneously, and measure those frequencies using a precision wavelength meter (WLM). A major novelty of this method is that the parameters' uncertainty is solely determined by the resolution of the WLM, eliminating all of the temporal environment fluctuations. Moreover, the technique with two lasers consists of a vital approach for determining geometric parameters of a short cavity, with a free spectral range on the order of THz. Our system operates in the strong atom-cavity coupling regime that allows us to explore fundamental quantum optics and implement quantum network protocols.

•Feb 11, 2021•1 citation

High finesse optical fiber cavities: optimal alignment and robust stabilization (Conference Presentation)

Lothar Ratschbacher, Jose Gallego, Sutapa Ghosh +4 more

Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.

•Aug 3, 2016•0 citations

Precise and extensive characterization of an optical resonator for cavity-based quantum networks

Dowon Lee, Myunghun Kim, Jungsoo Hong +6 more

Cavity-based quantum node is a competitive platform for distributed quantum networks. Here, we characterize a high-finesse Fabry-Pérot optical resonator for coupling single or few atomic quantum registers. Our cavity consists of two mirrors with different reflectivities: One has minimal optical loss, and the other high transmission loss where more than 90% of the intracavity photons would be emitted. Cavity finesse, birefringent effects, and mechanical resonances are measured using the lasers at 780, 782, and 795 nm. In order to obtain cavity geometric parameters, we drive the adjacent longitudinal or transverse modes with two lasers simultaneously, and measure those frequencies using a precision wavelength meter (WLM). A major novelty of this method is that the parameters’ uncertainties are solely determined by the resolution of the WLM, eliminating all of the temporal environment fluctuations. Our scheme makes it possible to quantify the atom-cavity coupling constant up to four significant figures, the most precise and accurate estimation so far, which would become a key ingredient for benchmarking a cavity-based quantum node. Furthermore, the distortion of polarized photonic qubits would be minimized owing to the small birefringent splitting, below 4.9% of the cavity linewidth. Our system should operate in the intermediate atom-cavity coupling regime that would allow us to implement various quantum network protocols.

arXiv:2102.05853•Optics Continuum•Mar 7, 2022•2 citations

Ultra-Stable and Tunable Fabry-Perot Cavity for an Ytterbium Based Superradiant Laser

Martin Hauden, Martina Matusko, Jana El Badawi +3 more

SummaryActive optical atomic clocks are emerging as a new promising tool for time and frequency metrology. Such clocks have the potential to reach a fractional frequency instability in the 10-18range at one second [1]. These references are based on the superradiant emission of an ensemble of atoms coupled to a single mode of the electromagnetic field [2]. For optical references, this coupling is achieved through a resonant high-finesse Fabry-Perot cavity that therefore plays a crucial role to reach superradiant lasing. Specific characteristics are required to permit superradiant emission in a metrologically relevant regime: tunability of the cavity resonant frequency, ability to accommodate atoms and low fractional length fluctuations, in the order of 10-13. This work shows the conception, through simulation, assembly and preliminary characterization of this Fabry Perot cavity.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•1 citation
The exact expressions of finesse and full width at half maximum (FWHM) of the Airy distribution of a Fabry-P'erot (FP) resonator are derived, which solves the breakdown problem at ultralow reflectivity in traditional formulas. We demonstrate that, when the cavity-mirror reflectivity R\ensuremath→0R\ensuremath{\rightarrow}0R\ensuremath→0, the FWHM approaches half of the free spectral range rather than infinity; moreover, the cavity finesse F\mathcal{F}F approaches 2 rather than zero. These expressions are useful for the development of bad-cavity lasers, such as the four-level active optical clock based on the strong atomic transition of cesium. Also, the exact expressions of the FWHM and finesse of the reflection distribution composed of reflected mode profiles are derived, which separately intersect with that of the Airy one at R=0R=0R=0. In addition, the characteristics of an antiresonant cavity, the frequency of which is exactly at the center of two adjacent resonant cavity modes, are analyzed. It is demonstrated that at the resonant and antiresonant frequencies the enhancement and inhibition of intracavity light intensity caused by the FP cavity are symmetrical in the logarithmic view. Furthermore, we provide a universal expression of the cavity-enhancement factor rather than the classical representation of ``2F/2F\ensuremathπ\ensuremathπ\text{2}\mathcal{F}/\phantom{\text{2}\mathcal{F}\ensuremath{\pi}}\phantom{\rule{0.0pt}{0ex}}\ensuremath{\pi}2F/2F\ensuremathπ\ensuremathπ,'' which is inadequate for the high-loss cavity because the cavity-enhancement factor should naturally reach 1 when R\ensuremath→0R\ensuremath{\rightarrow}0R\ensuremath→0. Finally, we extend the application of the antiresonant cavity to an inhibited laser, the frequency of which has a stronger suppression effect on the cavity-length thermal noise than the traditional resonant laser.
Fiber Fabry–Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry–Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound–Drever–Hall locking technique is compared to a novel rigid cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. Furthermore, we present a general analysis of the mode matching problem in fiber Fabry–Perot cavities, which explains the asymmetry in their reflective line shapes and has important implications for the optimal alignment of the fiber resonators. Finally, we discuss the issue of fiber-generated background photons. We expect that our results contribute toward the integration of high-finesse fiber Fabry–Perot cavities into compact and robust quantum-enabled devices in the future.
A single photon that enters a Fabry-Perot resonator leaves again after a dwell time set by how often it reflects and how much light escapes at each reflection. That dwell time decides whether the photon can be held long enough for a control operation, a heralding check, or a synchronisation delay, and it also sets the spectral width the source must match. This study computes the quantities that follow from stated assumptions for a symmetric two-mirror Fabry-Perot cavity of length 0.05 m, wavelength 780 nm, with a fixed additional round-trip loss of 0.002 in intensity, using the relations set out in the Methods. The headline results are finesse at R 0.99 = 260.7, lifetime at R 0.99 s = 1.384e-08, linewidth at R 0.99 Hz = 1.150e+07, finesse at R 0.9995 = 1.256e+03, lifetime at R 0.9995 s = 6.666e-08. Further computed values are saturation ratio lifetime = 4.817. The central question is stated as follows: How much storage time, spectral width and round-trip loss follow from a stated mirror reflectivity for a five-centimetre resonator at 780 nm, and at what reflectivity does further coating improvement stop buying useful time because other losses dominate? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Laboratory resonators of this size are commonly quoted with finesse values from a few hundred for coated optics to well above one hundred thousand for supermirror coatings, so a sweep across that interval tests both ordinary and demanding coatings. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs.
We characterize a high-finesse Fabry-Perot resonator for coupling with single neutral atoms. Our cavity consists of two mirrors with different reflectivities: One has minimal optical loss, and the other high transmission loss where more than 90% of the intracavity photons would be emitted. Cavity finesse, birefringent effects, and mechanical resonances are measured using the lasers at 780, 782, and 795 nm. In order to obtain cavity geometric parameters, we drive the adjacent longitudinal or transverse modes with two lasers simultaneously, and measure those frequencies using a precision wavelength meter (WLM). A major novelty of this method is that the parameters' uncertainty is solely determined by the resolution of the WLM, eliminating all of the temporal environment fluctuations. Moreover, the technique with two lasers consists of a vital approach for determining geometric parameters of a short cavity, with a free spectral range on the order of THz. Our system operates in the strong atom-cavity coupling regime that allows us to explore fundamental quantum optics and implement quantum network protocols.
Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.
Cavity-based quantum node is a competitive platform for distributed quantum networks. Here, we characterize a high-finesse Fabry-Pérot optical resonator for coupling single or few atomic quantum registers. Our cavity consists of two mirrors with different reflectivities: One has minimal optical loss, and the other high transmission loss where more than 90% of the intracavity photons would be emitted. Cavity finesse, birefringent effects, and mechanical resonances are measured using the lasers at 780, 782, and 795 nm. In order to obtain cavity geometric parameters, we drive the adjacent longitudinal or transverse modes with two lasers simultaneously, and measure those frequencies using a precision wavelength meter (WLM). A major novelty of this method is that the parameters’ uncertainties are solely determined by the resolution of the WLM, eliminating all of the temporal environment fluctuations. Our scheme makes it possible to quantify the atom-cavity coupling constant up to four significant figures, the most precise and accurate estimation so far, which would become a key ingredient for benchmarking a cavity-based quantum node. Furthermore, the distortion of polarized photonic qubits would be minimized owing to the small birefringent splitting, below 4.9% of the cavity linewidth. Our system should operate in the intermediate atom-cavity coupling regime that would allow us to implement various quantum network protocols.
SummaryActive optical atomic clocks are emerging as a new promising tool for time and frequency metrology. Such clocks have the potential to reach a fractional frequency instability in the 10-18range at one second [1]. These references are based on the superradiant emission of an ensemble of atoms coupled to a single mode of the electromagnetic field [2]. For optical references, this coupling is achieved through a resonant high-finesse Fabry-Perot cavity that therefore plays a crucial role to reach superradiant lasing. Specific characteristics are required to permit superradiant emission in a metrologically relevant regime: tunability of the cavity resonant frequency, ability to accommodate atoms and low fractional length fluctuations, in the order of 10-13. This work shows the conception, through simulation, assembly and preliminary characterization of this Fabry Perot cavity.