Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Novel characterization of an optical cavity with small mode volume

Moonjoo Lee, Myunghun Kim, Jungsoo Hong, JunWoo Kim, Sungsam Kang, Youngwoon Choi, Kyungwon An

Published Feb 11, 2021• 1 citation
OpenAlex

Abstract

We characterize a high-finesse Fabry-Perot resonator for coupling with single neutral atoms. Our cavity consists of two mirrors with different reflectivities: One has minimal optical loss, and the other high transmission loss where more than 90% of the intracavity photons would be emitted. Cavity finesse, birefringent effects, and mechanical resonances are measured using the lasers at 780, 782, and 795 nm. In order to obtain cavity geometric parameters, we drive the adjacent longitudinal or transverse modes with two lasers simultaneously, and measure those frequencies using a precision wavelength meter (WLM). A major novelty of this method is that the parameters' uncertainty is solely determined by the resolution of the WLM, eliminating all of the temporal environment fluctuations. Moreover, the technique with two lasers consists of a vital approach for determining geometric parameters of a short cavity, with a free spectral range on the order of THz. Our system operates in the strong atom-cavity coupling regime that allows us to explore fundamental quantum optics and implement quantum network protocols.

Related papers

Precise and extensive characterization of an optical resonator for cavity-based quantum networks

Dowon Lee, Myunghun Kim, Jungsoo Hong +6 more

Cavity-based quantum node is a competitive platform for distributed quantum networks. Here, we characterize a high-finesse Fabry-Pérot optical resonator for coupling single or few atomic quantum registers. Our cavity consists of two mirrors with different reflectivities: One has minimal optical loss, and the other high transmission loss where more than 90% of the intracavity photons would be emitted. Cavity finesse, birefringent effects, and mechanical resonances are measured using the lasers at 780, 782, and 795 nm. In order to obtain cavity geometric parameters, we drive the adjacent longitudinal or transverse modes with two lasers simultaneously, and measure those frequencies using a precision wavelength meter (WLM). A major novelty of this method is that the parameters’ uncertainties are solely determined by the resolution of the WLM, eliminating all of the temporal environment fluctuations. Our scheme makes it possible to quantify the atom-cavity coupling constant up to four significant figures, the most precise and accurate estimation so far, which would become a key ingredient for benchmarking a cavity-based quantum node. Furthermore, the distortion of polarized photonic qubits would be minimized owing to the small birefringent splitting, below 4.9% of the cavity linewidth. Our system should operate in the intermediate atom-cavity coupling regime that would allow us to implement various quantum network protocols.

arXiv:2102.05853•Optics Continuum•Mar 7, 2022•2 citations

Optical characterization of a fiber Fabry-Perot cavity: precision measurement of intra-cavity loss, transmittance, and reflectance

Qin Chen, Xiqing Guo, Jing Zhou +6 more

We propose and demonstrate a method for characterizing the individual mirror parameters of a fiber Fabry-Perot cavity (FFPC). By measuring the reflection and transmission spectra of the FFPC with an incident laser propagating from the two mirrors of the FFPC and considering several normal or unique losses, the transmittance, reflectance, and intra-cavity loss of the individual mirrors can be determined. Due to the intrinsic limitation of cavity length, traditional powerful methods, such as the cavity ring-down technique, are not applicable to FFPCs for characterizing the parameters of individual mirrors. This scheme provides a dependable method for assessing FFPC mirrors and provides a significant capability for the implementation of strong-coupling cavity quantum electrodynamics based on FFPCs.

Optics Express•Mar 22, 2024•7 citations

A fiber Fabry-Perot cavity with high finesse

D. Hunger, T. Steinmetz, Yves Colombe +3 more

Abstract. We have realized a fiber-based Fabry-Perot cavity with CO2 laser-machined mirrors. It combines very small size, high finesse F ≥ 130000, small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose-Einstein condensates enabled by this cavity [Y. Colombe et al., Nature 450, 272 (2007)]. It should also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle level, fiber-coupled single-photon sources and high-resolution optical filters with large stopband. PACS numbers: 07.60.Vg, 42.50.Ex, 42.50.Pq, 42.81.Wg 1.

•Jun 28, 2010•389 citations

A fiber Fabry–Perot cavity with high finesse

D Hunger, T. Steinmetz, Yves Colombe +3 more

We have realized a fiber-based Fabry–Perot cavity with CO 2 laser-machined mirrors. It combines very small size, high finesse , small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose–Einstein condensates enabled by this cavity (Colombe Y et al 2007 Nature 450 272). It will also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle level, fiber-coupled single-photon sources and high-resolution optical filters with large stopband.

arXiv:1005.0067•New Journal of Physics•Jun 28, 2010•478 citations

Controlling Atom Array in an Ultra-high-cooperativity Optical Cavity

Jilai Ye, Zhihao Chi, Ye Tian +7 more

Neutral-atom array and cavity quantum electrodynamics offer complementary strengths for quantum science: scalable, reconfigurable qubit architectures and strong coherent light-matter coupling. Combining them in a single platform requires an optical cavity with simultaneously high cooperativity, sufficient mode volume to accommodate atom array, and ample side optical access for atom trapping, imaging, cooling, and rearrangement, a combination that is challenging to achieve. Here we realize an atomic array integrated with a millimeter-scale Fabry--Pérot cavity whose optically-characterized single-atom cooperativity reaches $η_{\mathrm{cav}}=125\pm13$. Atom-cavity transmission spectra of trapped atoms yield an effective spectroscopic cooperativity $η_{\mathrm{spec}}=106\pm 3$, providing an in-situ verification of strong coupling in the integrated platform. In this integrated system, we achieve a state-measurement fidelity of $99.925^{+15}_{-18}\%$ for a single atom with a 4-$μ$s readout time. We also demonstrate simultaneous coupling of up to 21 individually trapped atoms to the antinode of the cavity mode. The key technical advance is a two-step mirror-fabrication method combining precision mechanical shaping and carbon-dioxide laser polishing, which produces concave fused-silica mirrors with sub-millimeter radii of curvature and residual roughness below $2~Å$. Our results establish a regime of cavity-integrated atomic array that simultaneously provides high cooperativity, large mode volume, and flexible manipulation of individual atoms, opening opportunities for cavity-assisted quantum state readout and long-range entanglement-engineering in atom-array platforms.

quant-pharXiv:2607.04090•Jul 7, 2026•6 citations

Single atoms on demand for cavity QED experiments

I. Dotsenko

Cavity quantum electrodynamics (cavity QED) describes electromagnetic fields in a confined space and the radiative properties of atoms in such fields. The simplest example of such system is a single atom interacting with one mode of a high-finesse resonator. Besides observation and exploration of fundamental quantum mechanical effects, this system bears a high potential for applications quantum information science such as, e.g., quantum logic gates, quantum communication and quantum teleportation. In this thesis I present an experiment on the deterministic coupling of a single neutral atom to the mode of a high-finesse optical resonator. In Chapter 1 I describe our basic techniques for trapping and observing single cesium atoms. As a source of single atoms we use a high-gradient magneto-optical trap, which captures the atoms from background gas in a vacuum chamber and cools them down to millikelvin temperatures. The atoms are then transferred without loss into a standing-wave dipole trap, which provides a conservative potential required for experiments on atomic coherence such as quantum information processing and metrology on trapped atoms. Moreover, shifting the standing-wave pattern allows us to deterministically transport the atoms (Chapter 2). In combination with non-destructive fluorescence imaging of individual trapped atoms, this enables us to control their position with submicrometer precision over several millimeters along the dipole trap. The cavity QED system can distinctly display quantum behaviour in the so-called strong coupling regime, i.e., when the coherent atom-cavity coupling rate dominates dissipation in the system. This sets the main requirements on the resonator's properties: small mode volume and high finesse. Chapter 3 is devoted to the manufacturing, assembling, and testing of an ultra-high finesse optical Fabry-Perot resonator, stabilized to the atomic transition. In Chapter 4 I present the transportation of single atoms into the cavity and their coupling to the cavity mode. The strong coupling manifests itself in a strong reduction of the cavity transmission probed by a weak external laser. The atoms remain trapped and coupled to the cavity mode for several seconds until we move them out of the cavity for final analysis of their number and position.

•Jan 1, 2007•6 citations
We characterize a high-finesse Fabry-Perot resonator for coupling with single neutral atoms. Our cavity consists of two mirrors with different reflectivities: One has minimal optical loss, and the other high transmission loss where more than 90% of the intracavity photons would be emitted. Cavity finesse, birefringent effects, and mechanical resonances are measured using the lasers at 780, 782, and 795 nm. In order to obtain cavity geometric parameters, we drive the adjacent longitudinal or transverse modes with two lasers simultaneously, and measure those frequencies using a precision wavelength meter (WLM). A major novelty of this method is that the parameters' uncertainty is solely determined by the resolution of the WLM, eliminating all of the temporal environment fluctuations. Moreover, the technique with two lasers consists of a vital approach for determining geometric parameters of a short cavity, with a free spectral range on the order of THz. Our system operates in the strong atom-cavity coupling regime that allows us to explore fundamental quantum optics and implement quantum network protocols.
Cavity-based quantum node is a competitive platform for distributed quantum networks. Here, we characterize a high-finesse Fabry-Pérot optical resonator for coupling single or few atomic quantum registers. Our cavity consists of two mirrors with different reflectivities: One has minimal optical loss, and the other high transmission loss where more than 90% of the intracavity photons would be emitted. Cavity finesse, birefringent effects, and mechanical resonances are measured using the lasers at 780, 782, and 795 nm. In order to obtain cavity geometric parameters, we drive the adjacent longitudinal or transverse modes with two lasers simultaneously, and measure those frequencies using a precision wavelength meter (WLM). A major novelty of this method is that the parameters’ uncertainties are solely determined by the resolution of the WLM, eliminating all of the temporal environment fluctuations. Our scheme makes it possible to quantify the atom-cavity coupling constant up to four significant figures, the most precise and accurate estimation so far, which would become a key ingredient for benchmarking a cavity-based quantum node. Furthermore, the distortion of polarized photonic qubits would be minimized owing to the small birefringent splitting, below 4.9% of the cavity linewidth. Our system should operate in the intermediate atom-cavity coupling regime that would allow us to implement various quantum network protocols.
We propose and demonstrate a method for characterizing the individual mirror parameters of a fiber Fabry-Perot cavity (FFPC). By measuring the reflection and transmission spectra of the FFPC with an incident laser propagating from the two mirrors of the FFPC and considering several normal or unique losses, the transmittance, reflectance, and intra-cavity loss of the individual mirrors can be determined. Due to the intrinsic limitation of cavity length, traditional powerful methods, such as the cavity ring-down technique, are not applicable to FFPCs for characterizing the parameters of individual mirrors. This scheme provides a dependable method for assessing FFPC mirrors and provides a significant capability for the implementation of strong-coupling cavity quantum electrodynamics based on FFPCs.
Abstract. We have realized a fiber-based Fabry-Perot cavity with CO2 laser-machined mirrors. It combines very small size, high finesse F ≥ 130000, small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose-Einstein condensates enabled by this cavity [Y. Colombe et al., Nature 450, 272 (2007)]. It should also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle level, fiber-coupled single-photon sources and high-resolution optical filters with large stopband. PACS numbers: 07.60.Vg, 42.50.Ex, 42.50.Pq, 42.81.Wg 1.
We have realized a fiber-based Fabry–Perot cavity with CO 2 laser-machined mirrors. It combines very small size, high finesse , small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose–Einstein condensates enabled by this cavity (Colombe Y et al 2007 Nature 450 272). It will also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle level, fiber-coupled single-photon sources and high-resolution optical filters with large stopband.
Neutral-atom array and cavity quantum electrodynamics offer complementary strengths for quantum science: scalable, reconfigurable qubit architectures and strong coherent light-matter coupling. Combining them in a single platform requires an optical cavity with simultaneously high cooperativity, sufficient mode volume to accommodate atom array, and ample side optical access for atom trapping, imaging, cooling, and rearrangement, a combination that is challenging to achieve. Here we realize an atomic array integrated with a millimeter-scale Fabry--Pérot cavity whose optically-characterized single-atom cooperativity reaches ηcav=125±13η_{\mathrm{cav}}=125\pm13ηcav​=125±13. Atom-cavity transmission spectra of trapped atoms yield an effective spectroscopic cooperativity ηspec=106±3η_{\mathrm{spec}}=106\pm 3ηspec​=106±3, providing an in-situ verification of strong coupling in the integrated platform. In this integrated system, we achieve a state-measurement fidelity of 99.925−18+15%99.925^{+15}_{-18}\%99.925−18+15​% for a single atom with a 4-μμμs readout time. We also demonstrate simultaneous coupling of up to 21 individually trapped atoms to the antinode of the cavity mode. The key technical advance is a two-step mirror-fabrication method combining precision mechanical shaping and carbon-dioxide laser polishing, which produces concave fused-silica mirrors with sub-millimeter radii of curvature and residual roughness below 2 A˚2~Å2 A˚. Our results establish a regime of cavity-integrated atomic array that simultaneously provides high cooperativity, large mode volume, and flexible manipulation of individual atoms, opening opportunities for cavity-assisted quantum state readout and long-range entanglement-engineering in atom-array platforms.
Cavity quantum electrodynamics (cavity QED) describes electromagnetic fields in a confined space and the radiative properties of atoms in such fields. The simplest example of such system is a single atom interacting with one mode of a high-finesse resonator. Besides observation and exploration of fundamental quantum mechanical effects, this system bears a high potential for applications quantum information science such as, e.g., quantum logic gates, quantum communication and quantum teleportation. In this thesis I present an experiment on the deterministic coupling of a single neutral atom to the mode of a high-finesse optical resonator. In Chapter 1 I describe our basic techniques for trapping and observing single cesium atoms. As a source of single atoms we use a high-gradient magneto-optical trap, which captures the atoms from background gas in a vacuum chamber and cools them down to millikelvin temperatures. The atoms are then transferred without loss into a standing-wave dipole trap, which provides a conservative potential required for experiments on atomic coherence such as quantum information processing and metrology on trapped atoms. Moreover, shifting the standing-wave pattern allows us to deterministically transport the atoms (Chapter 2). In combination with non-destructive fluorescence imaging of individual trapped atoms, this enables us to control their position with submicrometer precision over several millimeters along the dipole trap. The cavity QED system can distinctly display quantum behaviour in the so-called strong coupling regime, i.e., when the coherent atom-cavity coupling rate dominates dissipation in the system. This sets the main requirements on the resonator's properties: small mode volume and high finesse. Chapter 3 is devoted to the manufacturing, assembling, and testing of an ultra-high finesse optical Fabry-Perot resonator, stabilized to the atomic transition. In Chapter 4 I present the transportation of single atoms into the cavity and their coupling to the cavity mode. The strong coupling manifests itself in a strong reduction of the cavity transmission probed by a weak external laser. The atoms remain trapped and coupled to the cavity mode for several seconds until we move them out of the cavity for final analysis of their number and position.