The measurement on energy levels suitable for time standards can be made more precise with the use of neutral atom manipulation techniques. We have created a fountain of atoms where the measurement time of atoms in ballistic free-fall can be on the order of a fraction of a second. With these long measurement times, the linewidth of the transition between the ground state hyperfine transition of sodium was measured to be 2 Hz. Transitions in the optical frequency range could then have Q's of 1014 to 1015. In addition to creating high Q resonances, it is desirable to have a continuous, high density fountain of atoms. Towards this end, we have constructed an "atomic funnel" capable of creating a cold, high flux stream of atoms suitable for injection into a continuous atomic fountain. In the first embodiment of the funnel, the brightness of the atomic beam (defined as the number of atoms per second/( ΔvxΔvyΔvz) was increased by a factor of 3 × 103. With more recent improvements for both funneling more atoms from the hot atomic beam and better use of polarization gradient cooling to launch the atoms, we will describe how to improve the brightness enhancement by another four orders of magnitude.
The measurement on energy levels suitable for time standards can be made more precise with the use of neutral atom manipulation techniques. We have created a fountain of atoms where the measurement time of atoms in ballistic free-fall can be on the order of a fraction of a second. With these long measurement times, the linewidth of the transition between the ground state hyperfine transition of sodium was measured to be 2 Hz. Transitions in the optical frequency range could then have Q's of 1014 to 1015. In addition to creating high Q resonances, it is desirable to have a continuous, high density fountain of atoms. Towards this end, we have constructed an "atomic funnel" capable of creating a cold, high flux stream of atoms suitable for injection into a continuous atomic fountain. In the first embodiment of the funnel, the brightness of the atomic beam (defined as the number of atoms per second/( ΔvxΔvyΔvz) was increased by a factor of 3 × 103. With more recent improvements for both funneling more atoms from the hot atomic beam and better use of polarization gradient cooling to launch the atoms, we will describe how to improve the brightness enhancement by another four orders of magnitude.
A number of experimental applications of laser cooling of neutral atoms are described. In an experiment on atomic fountains, laser-cooled atoms pushed up on a vertical trajectory by radiation pressure were observed to turn around due to gravity. A compact cesium fountain that would give three to four orders of magnitude increase in the counting rate over the first experiment can be designed, and the trapping and cooling can be done with diode lasers, suggesting a practical clock. In order to increase the time-averaged flux of such a fountain and also create a continuous fountain, an atomic funnel that can produce an atomic beam of very low velocity ( approximately 270 cm/s) at densities of 10/sup 8/ atoms/cm/sup 2/ has been devised.>
In the absence of other fields, particles fall under gravity, which sets a practical limit on the single-measurement time T. Atomic fountains, where an ensemble of atoms is launched upwards into a ballistic flight region, allow one to increase the measurement time. Since the fractional accuracy of an atomic clock improves with increasing transition frequency, it is natural to consider the use of optical-frequency electronic transitions rather than microwave-frequency hyperfine transitions as the basis for a clock. Clocks operating on optical transitions have already surpassed the much more mature hyperfine-transition atomic-fountain clocks in accuracy, and further improvements are expected. In practice, however, the allowable atom number is severely limited by the onset of collision shifts which, as seen, are the bane of compact trapped-atom clocks. Spin squeezing of superpositions of clock states is an active research area, with several recently demonstrated implementations. Controlled Vocabulary Terms atomic clocks; optical squeezing
Since 1967, the Second has been defined by the CGPM as 9,192,631,770 periods of oscillation corresponding to a transition between two hyperfine levels in a Cesium atom with zero external fields. Key to this definition was the fact that as experimentalists found new and more precise ways to measure this frequency, the definition of the second would become more and more accurate with time. However, in the last 30 years, new technologies based on tunable lasers addressing optical transitions in atoms, ions, and molecules have offered an entirely new approach to defining the Second with significantly higher precision and accuracy. Here, I will show that by trapping thousands of atoms inside a specially engineered optical lattice one can create an extremely accurate frequency standard with 2 orders of magnitude improvement over current Cs standards. Furthermore, I will explain that standards based on this technology are fundamentally more stable than the primary standard by 3 orders of magnitude. Leapfrogging the currently held accuracy records of ion clocks, this work documents the first optical lattice clock to best all other atomic clock implementations, a mere 8 years after the first proof of principle experiments. In this thesis I will describe how we have overcome a number of important systematic uncertainties to achieve these results. This revolution in accuracy and precision opens the door for new experiments utilizing the clock as a probe of quantum many-body physics. To this end, a new apparatus has been designed that combines the unprecedented precision of clock experiments with the amazing progress attained in quantum gas experiments.
Experimental techniques of laser cooling and trapping, along with other cooling techniques, have produced gaseous samples of atoms so cold that they are, for many practical purposes, in the quantum ground state of their centre-of-mass motion. Such low velocities have virtually eliminated effects such as Doppler shifts, relativistic time dilation and observation-time broadening that previously limited the performance of atomic frequency standards. Today, the best laser-cooled, caesium atomic fountain, microwave frequency standards realize the International System of Units (SI) definition of the second to a relative accuracy of ≈3×10(-16). Optical frequency standards, which do not realize the SI second, have even better performance: cold neutral atoms trapped in optical lattices now yield relative systematic uncertainties of ≈1×10(-16), whereas cold-trapped ions have systematic uncertainties of 9×10(-18). We will discuss the current limitations in the performance of neutral atom atomic frequency standards and prospects for the future.
8half a century ago and have provided the definition of the second since 1967. The international atomic time (TAI) is currently kept by an ensemble of Cs clocks with a fractional uncertainty of Δν/ν0 ≈ 10 –15 , and some Cs fountain clocks 9,10 operate at even smaller uncertainties. Although Cs atomic clocks operate at the microwave transition of ν0 ≈ 9.2 GHz, using optical transition frequencies of several hundred terahertz should improve the fractional uncertainty Δν/ν0 by 4–5 orders of magnitude, as most measurement uncertainties Δν are independent of ν0 (except the Doppler shift Δ νD = (v/c)ν0, where v is the atomic velocity and c is the speed of light). The invention of the laser and the subsequent improvement of laser frequency stabilities 11 has allowed the realization of optical clocks to become a reality 2,3,12
The realisation of cold and slow atomic beams has opened the way to a series of precision measurements of high scientific interest, as atom interferometry, Bose-Einstein Condensation and atomic fountain clocks. The latter are used since several years as reference clocks, given the high performance that they can reach both in accuracy and stability. The common philosophy in the construction of atomic fountains has been the pulsed technique, where an atoms sample is launched vertically and then falls down under the effect of the gravity. The Observatoire de Neuchâtel had a different approach and has built a fountain clock (FOCS1) operating in a continuous mode. This technique offers two main advantages: the diminution of the undesirable effects due to the atomic density (e.g. collisions between the atoms and cavity pulling) and to the noise of the local oscillator (intermodulation effect). To take full advantage of the continuous fountain approach however, we need to increase the atomic flux. The techniques chosen to reach this goal are an efficient transverse collimation together with more atoms to begin with. Here we report on a study of different transverse collimation techniques performed in a two-dimensional phase stable optical lattice (namely gray molasses and magnetically induced laser cooling) as well as the development and characterisation of a 2D-magneto-optical trap used to load the fountain. Best performances are reached in a 2D+-MOT configuration of such a pre-source, for which we detect an atomic flux 20 times greater than the one measured when the fountain is loaded by a Cs vapour. This gain could improve the atomic clock stability by a factor 6. An even better stability is expected after introducing a pre-cooling stage before performing the transverse collimation. This new configuration is currently under investigation and will be implemented in a second continuous fountain (FOCS2).