A multiterminal superconducting device with the S1IS2FIS3 structure (where S, I, and F denote a superconductor, an insulator, and a ferromagnetic material) is fabricated and characterized. Introducing a thin ferromagnetic layer into the middle electrode dramatically reduces parasitic back action of the acceptor junction (S1IS2) bias current on the injector junction (S2FIS3) current-voltage characteristic as compared with that for the formerly reported quiteron, a device exploiting similar operation principle.
We describe a low-noise, two-stage dc Superconducting QUantum Interference Device (SQUID) amplifier that is designed for applications requiring high bandwidth and dynamic range. The output signal of a low-noise SQUID in the input stage coherently modulates a series array of identical SQUIDs in the output stage via a common modulation line. The input stage is designed so its output signal does not produce multiple modulation periods in the output stage. The output stage is designed to have sufficient gain so the output noise is dominated by the amplified noise of the input SQUID and exceeds the noise of a preamplifier in the room temperature readout electronics. The SQUID amplifier may therefore be operated without flux modulation or any impedance matching network, resulting in a large dynamic range and high bandwidth.
Superconducting travelling-wave parametric amplifiers (TWPAs) provide broadband gain, low added noise, and high dynamic range, making them attractive for applications requiring wide instantaneous bandwidth. This is crucial for amplifying multiplexed narrow band signals spread over a wide frequency range, such as qubit resonator arrays, or amplifying inherently wide band signals, such as in spectrometers or radiometers. In many cases, however, the useful bandwidth of a TWPA is limited by the production of the idler tone at an image frequency. For three-wave-mixing (3WM) TWPAs, for example, an input signal at
fs is indistinguishable from one at
fp−fs, which can produce spectral ambiguity when the input spectrum is broadband or not known in advance. We experimentally demonstrate a balanced architecture that doubles the instantaneous image-rejected bandwidth available to a 3WM TWPA by spatially separating the amplified signal from the output pump and generated idler, which resolves the sideband degeneracy. The architecture consists of two amplifiers connected between a pair of 180
∘ hybrid couplers, with the signal and pump injected and output through the sum and difference ports, respectively. Using two kinetic-inductance TWPAs, we demonstrate approximately 20 dB of signal gain across nearly an octave of bandwidth, together with pump rejection below --20 dB and an average image rejection of approximately --15 dB over the operating band. These results establish balanced TWPAs as a practical approach to broadband parametric amplification, enabling improved contamination free bandwidth and eliminating the need for complex filtering.
High Resolution Image Download MS PowerPoint Slide Wilkinson power dividers (WPDs) are a popular element in RF and microwave technologies known for providing isolation capabilities. However, the benefits that WPDs could offer to integrated photonic systems are far less studied. Here, we investigate the thermal emission from and the noise performance of silicon-on-insulator (SOI) WPDs. We find that WPDs exhibit a noiseless port, with important implications for receiving systems and absorption-based quantum state transformations. At the same time, the thermal signals exiting noisy ports exhibit nontrivial correlations, opening the possibility for noise cancellation. We analyze passive and active networks containing WPDs showing how such nontrivial correlations can prevent the amplification of the thermal noise introduced by WPDs while benefiting from their isolation capabilities. Using this insight, we propose a modified ring-resonator amplifier that improves by N times the SNR in comparison with conventional traveling wave and ring-resonator amplifiers, with N being the number of inputs/outputs of the WPD. We believe that our results represent an important step forward in the implementation of SOI-WPDs and their integration in complex photonic networks, particularly for mid-IR and quantum photonics applications.