Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEJ Transactions on Electronics Information and Systems

Effect of Multiple Positions Illumination in Quantum Ghost Imaging

Yuto Takahashi, Tiancheng Wang, Shogo Usami, Tsuyoshi Sasaki Usuda

Published Jul 31, 2022• 0 citations
Publisher

Abstract

Quantum ghost imaging is the protocol that uses entanglement to obtain images of an object, which was realized by T.B. Pittman et al. In quantum ghost imaging, one of the two entangled lights is illuminated to the object, and the other is illuminated directly to the detector. Then, the image of the object is generated by correlating the intensity of these lights. Thus, compared to ordinary cameras, it is less affected by noise. However, it takes a long time to obtain the image of the object because it requires many times of illuminations of light. Therefore, in this study, we consider quantum ghost imaging that illuminates multiple positions simultaneously. We evaluate the effect of reducing the time to obtain the image by multiple positions illumination by the peak signal-to-noise ratio performance of quantum ghost imaging depending on the number of illuminated positions N and transmissivity η. Then we clarify that large N realizes better performance than small N when the attenuation is severe but a value of N that is too large degrades the performance when the attenuation is low.

DOI
10.1541/ieejeiss.142.933

Related papers

Ghost Imaging with Non-Gaussian Quantum Light

Dongyu Liu, Mingsheng Tian, Shuheng Liu +5 more

Nonlocal point-to-point correlations between two photons have been used to produce ``ghost'' images without placing the camera towards the object. Here we theoretically demonstrate and analyze the advantage of non-Gaussian quantum light in improving the image quality of a ghost imaging system over a traditional Gaussian light source. For any squeezing degree, the signal-to-noise ratio (SNR) of the ghost image can be enhanced by the non-Gaussian operations of photon addition and subtraction on a two-mode squeezed light source. We find striking evidence that using non-Gaussian coherent operations, the SNR can be promoted to a high level even within the extremely weak squeezing regime. The resulting insight provides experimental recipes of quantum imaging using non-Gaussian light for illumination.

arXiv:2106.00443•Physical Review Applied•Dec 15, 2021•16 citations

Improvement of the optical image reconstruction based on multiplexed quantum ghost images

Dmitriy A. Balakin, Aleksandr V. Belinsky, A. S. Chirkin

Ghost imaging allows one to obtain information on an object from the spatial correlation function between photons propagating through or reflected from the object and photons of the reference arm. In this case, detection in the object arm is performed over the entire aperture of the beam and, therefore, it does not give information on the object. The reference beam does not interact with the object, but is recorded with a scanning point detector or a CCD array permitting the measurement of the spatial correlation function of photons in two arms. The use of multimode entangled quantum light beams by illuminating the object by one beam and orienting other beams to reference arms makes it possible to obtain simultaneously several ghost images (GIs). Cross correlations of multiplexed GIs (MGIs) are determined by eighth-order field correlation functions. A special algorithm is developed for calculating higher-order correlations of Bose operators. The presence of GI cross correlations is used for improving the quality of the reconstructed object’s image by their processing using the measurement reduction method. An example of the computer simulation of the image reconstruction by MGIs formed in the field of four-frequency entangled quantum states is considered. It is found that in this case the reduced GI has a signal-to-noise ratio several times higher than that of GIs.

Journal of Experimental and Theoretical Physics•Aug 1, 2017•11 citations

Does quantum ghost imaging need a camera to image an object?

Chané Moodley, Andrew Forbes

Pairs of entangled photos are used to reconstruct an image in the application area known as quantum ghost imaging. It is the correlation between the photon pair that allows for the reconstruction of the image, as opposed to single photon detection. The entangled photons are spatially separated into two independent paths, one to illuminate the object and the other which is collected by a spatially resolving detector. Initially, ghost imaging experiments accomplished spatially resolving detectors by moving a single-pixel detector throughout a transverse scanning area. Advancements consisted of using ultra-sensitive cameras to avoid a system consisting of physically moving detectors. Ultra-sensitive cameras are, however, expensive and have limited spectral sensitivity. Here we demonstrate an alternative by utilising a spatial light modulator and a bucket detector to spatially resolve what is detected. Importantly, the masks displayed on the spatial light modulator must constitute a complete basis to acquire a completely reconstructed image. Historically, imaging speeds have been slow and inefficient due to the quadratic increase in the scanning capability for spatially resolved detectors and the low light levels associated with quantum experiments. Here we additionally utilise machine and deep learning algorithms to improve both image reconstruction time and resolution. We demonstrate this with a non-degenerate ghost imaging setup where the physical parameters such as the mask type and resolution are varied and controlled on a spatial light modulator. Thereby answering the question: can we image an object without using a camera?

•Sep 30, 2022•0 citations

Cloaking and illusion of quantum imaging with entangled photon pairs

Xin-Bing Song, Jing Bo Zhao, Xiangdong Zhang

Quantum ghost imaging is a nonlocal imaging technique in which the image or diffraction pattern of an object illuminated by photon pairs can be observed through the correlation measurement. This study theoretically demonstrates the cloaking effect of such a quantum imaging. Quantum ghost imaging completely offsets two objects that are placed at proper positions in the interferometer. Furthermore, illusion of quantum imaging, where an object transforms into another object, has also been observed. This phenomenon can be understood by quantum interferences in the correlation measurement.

Journal of Modern Optics•Aug 20, 2014•0 citations

Heralded single-photon ghost imaging

Reuben S. Aspden, D. S. Tasca, Robert W. Boyd +1 more

Correlated-photon imaging, popularly known as ghost imaging, is a technique whereby an image is formed from light that has never interacted with the object. In ghost imaging experiments two correlated light fields are produced. One of these fields illuminates the object, and the other field is measured by a spatially resolving detector. In the quantum regime, these correlated light fields are produced by entangled photons created by spontaneous parametric down-conversion. To date, all correlated-photon ghost-imaging experiments have scanned a single-pixel detector through the field of view to obtain the spatial information. However, scanning leads to a poor sampling efficiency, which scales inversely with the number of pixels, N, in the image. In this work we overcome this limitation by using a time-gated camera to record the single-photon events across the full scene. We obtain high-contrast images, 90%, in either the image plane or the far-field of the photon pair source, taking advantage of the EPR-like correlations in position and momentum of the photon pairs. Our images contain a large number of modes, >500, creating opportunities in low-light-level imaging and in quantum information processing.

•Dec 20, 2012•1 citation

Interaction-free ghost-imaging of structured objects (Conference Presentation)

Yingwen Zhang, Alicia Sit, Frédéric Bouchard +6 more

Correlated light (either classical or quantum) can be employed in various ways to improve resolution and measurement sensitivity. In an “interaction-free” measurement, a single photon can be used to reveal the presence of an object placed within one arm of an interferometer without being absorbed by it. This method has previously been applied to imaging. With a technique known as “ghost imaging”, entangled photon pairs are used for detecting an opaque object with significantly improved signal-to-noise ratio while preventing over-illumination. Here, we integrate these two methods to obtain a new imaging technique which we term “interaction-free ghost-imaging” that possesses the benefits of both techniques. While improving the image quality of conventional ghost-imaging, this new technique is also sensitive to phase and polarization changes in the photons introduced by a structured object. Furthermore, thanks to the “interaction-free” nature of this new technique, it is possible to reduce the number of photons required to produce a clear image of the object (which could be otherwise damaged by the photons) making this technique superior for probing light-sensitive materials and eventually biological tissues. If time allows, I will discuss some follow-up works involving partial measurements and remote erasure/completion of images. The latter techniques can help to suppress various types of noise during the imaging process.

•Mar 5, 2019•0 citations
Quantum ghost imaging is the protocol that uses entanglement to obtain images of an object, which was realized by T.B. Pittman et al. In quantum ghost imaging, one of the two entangled lights is illuminated to the object, and the other is illuminated directly to the detector. Then, the image of the object is generated by correlating the intensity of these lights. Thus, compared to ordinary cameras, it is less affected by noise. However, it takes a long time to obtain the image of the object because it requires many times of illuminations of light. Therefore, in this study, we consider quantum ghost imaging that illuminates multiple positions simultaneously. We evaluate the effect of reducing the time to obtain the image by multiple positions illumination by the peak signal-to-noise ratio performance of quantum ghost imaging depending on the number of illuminated positions N and transmissivity η. Then we clarify that large N realizes better performance than small N when the attenuation is severe but a value of N that is too large degrades the performance when the attenuation is low.
Nonlocal point-to-point correlations between two photons have been used to produce ``ghost'' images without placing the camera towards the object. Here we theoretically demonstrate and analyze the advantage of non-Gaussian quantum light in improving the image quality of a ghost imaging system over a traditional Gaussian light source. For any squeezing degree, the signal-to-noise ratio (SNR) of the ghost image can be enhanced by the non-Gaussian operations of photon addition and subtraction on a two-mode squeezed light source. We find striking evidence that using non-Gaussian coherent operations, the SNR can be promoted to a high level even within the extremely weak squeezing regime. The resulting insight provides experimental recipes of quantum imaging using non-Gaussian light for illumination.
Ghost imaging allows one to obtain information on an object from the spatial correlation function between photons propagating through or reflected from the object and photons of the reference arm. In this case, detection in the object arm is performed over the entire aperture of the beam and, therefore, it does not give information on the object. The reference beam does not interact with the object, but is recorded with a scanning point detector or a CCD array permitting the measurement of the spatial correlation function of photons in two arms. The use of multimode entangled quantum light beams by illuminating the object by one beam and orienting other beams to reference arms makes it possible to obtain simultaneously several ghost images (GIs). Cross correlations of multiplexed GIs (MGIs) are determined by eighth-order field correlation functions. A special algorithm is developed for calculating higher-order correlations of Bose operators. The presence of GI cross correlations is used for improving the quality of the reconstructed object’s image by their processing using the measurement reduction method. An example of the computer simulation of the image reconstruction by MGIs formed in the field of four-frequency entangled quantum states is considered. It is found that in this case the reduced GI has a signal-to-noise ratio several times higher than that of GIs.
Pairs of entangled photos are used to reconstruct an image in the application area known as quantum ghost imaging. It is the correlation between the photon pair that allows for the reconstruction of the image, as opposed to single photon detection. The entangled photons are spatially separated into two independent paths, one to illuminate the object and the other which is collected by a spatially resolving detector. Initially, ghost imaging experiments accomplished spatially resolving detectors by moving a single-pixel detector throughout a transverse scanning area. Advancements consisted of using ultra-sensitive cameras to avoid a system consisting of physically moving detectors. Ultra-sensitive cameras are, however, expensive and have limited spectral sensitivity. Here we demonstrate an alternative by utilising a spatial light modulator and a bucket detector to spatially resolve what is detected. Importantly, the masks displayed on the spatial light modulator must constitute a complete basis to acquire a completely reconstructed image. Historically, imaging speeds have been slow and inefficient due to the quadratic increase in the scanning capability for spatially resolved detectors and the low light levels associated with quantum experiments. Here we additionally utilise machine and deep learning algorithms to improve both image reconstruction time and resolution. We demonstrate this with a non-degenerate ghost imaging setup where the physical parameters such as the mask type and resolution are varied and controlled on a spatial light modulator. Thereby answering the question: can we image an object without using a camera?
Quantum ghost imaging is a nonlocal imaging technique in which the image or diffraction pattern of an object illuminated by photon pairs can be observed through the correlation measurement. This study theoretically demonstrates the cloaking effect of such a quantum imaging. Quantum ghost imaging completely offsets two objects that are placed at proper positions in the interferometer. Furthermore, illusion of quantum imaging, where an object transforms into another object, has also been observed. This phenomenon can be understood by quantum interferences in the correlation measurement.
Correlated-photon imaging, popularly known as ghost imaging, is a technique whereby an image is formed from light that has never interacted with the object. In ghost imaging experiments two correlated light fields are produced. One of these fields illuminates the object, and the other field is measured by a spatially resolving detector. In the quantum regime, these correlated light fields are produced by entangled photons created by spontaneous parametric down-conversion. To date, all correlated-photon ghost-imaging experiments have scanned a single-pixel detector through the field of view to obtain the spatial information. However, scanning leads to a poor sampling efficiency, which scales inversely with the number of pixels, N, in the image. In this work we overcome this limitation by using a time-gated camera to record the single-photon events across the full scene. We obtain high-contrast images, 90%, in either the image plane or the far-field of the photon pair source, taking advantage of the EPR-like correlations in position and momentum of the photon pairs. Our images contain a large number of modes, >500, creating opportunities in low-light-level imaging and in quantum information processing.
Correlated light (either classical or quantum) can be employed in various ways to improve resolution and measurement sensitivity. In an “interaction-free” measurement, a single photon can be used to reveal the presence of an object placed within one arm of an interferometer without being absorbed by it. This method has previously been applied to imaging. With a technique known as “ghost imaging”, entangled photon pairs are used for detecting an opaque object with significantly improved signal-to-noise ratio while preventing over-illumination. Here, we integrate these two methods to obtain a new imaging technique which we term “interaction-free ghost-imaging” that possesses the benefits of both techniques. While improving the image quality of conventional ghost-imaging, this new technique is also sensitive to phase and polarization changes in the photons introduced by a structured object. Furthermore, thanks to the “interaction-free” nature of this new technique, it is possible to reduce the number of photons required to produce a clear image of the object (which could be otherwise damaged by the photons) making this technique superior for probing light-sensitive materials and eventually biological tissues. If time allows, I will discuss some follow-up works involving partial measurements and remote erasure/completion of images. The latter techniques can help to suppress various types of noise during the imaging process.