Nonlocal point-to-point correlations between two photons have been used to produce ``ghost'' images without placing the camera towards the object. Here we theoretically demonstrate and analyze the advantage of non-Gaussian quantum light in improving the image quality of a ghost imaging system over a traditional Gaussian light source. For any squeezing degree, the signal-to-noise ratio (SNR) of the ghost image can be enhanced by the non-Gaussian operations of photon addition and subtraction on a two-mode squeezed light source. We find striking evidence that using non-Gaussian coherent operations, the SNR can be promoted to a high level even within the extremely weak squeezing regime. The resulting insight provides experimental recipes of quantum imaging using non-Gaussian light for illumination.
Nonlocal point-to-point correlations between two photons have been used to produce ``ghost'' images without placing the camera towards the object. Here we theoretically demonstrate and analyze the advantage of non-Gaussian quantum light in improving the image quality of a ghost imaging system over a traditional Gaussian light source. For any squeezing degree, the signal-to-noise ratio (SNR) of the ghost image can be enhanced by the non-Gaussian operations of photon addition and subtraction on a two-mode squeezed light source. We find striking evidence that using non-Gaussian coherent operations, the SNR can be promoted to a high level even within the extremely weak squeezing regime. The resulting insight provides experimental recipes of quantum imaging using non-Gaussian light for illumination.
We investigate the nature of correlations in Gaussian light sources used for ghost imaging. We adopt methods from quantum information theory to distinguish genuinely quantum from classical correlations. Combining a microscopic analysis of speckle-speckle correlations with an effective coarse-grained description of the beams, we show that quantum correlations exist even in 'classical'-like thermal light sources, and appear relevant for the implementation of ghost imaging in the regime of low illumination. We further demonstrate that the total correlations in the thermal source beams effectively determine the quality of the imaging, as quantified by the signal-to-noise ratio.
Quantum illumination is a quantum sensing protocol primarily used for object detection, which aims to detect the presence of a target with low reflectivity in the free space using quantum light fields. Here we investigate a quantum illumination scheme using an entangled light source by performing non-Gaussian operations on the two-mode squeezed vacuum (TMSV) state in order to reduce the detection error probability and meanwhile improve the signal-to-noise (SNR) ratio. We demonstrate that under the same squeezing parameter, the non-Gaussian operations can significantly reduce the detection error rate compared with the original TMSV state. Under the same average signal photon number, both the TMSV states with and without non-Gaussian operations can provide smaller error rate than that of the coherent state. In addition, we consider the balanced homodyne detection on idler and return signal photons as joint measurement and find that non-Gaussian operations can enhance the SNR of target detection by about 6--9 dB compared with that using TMSV. These results here demonstrate the advantage of the non-Gaussian entangled source in quantum illumination protocol and can find potential applications in target detection in noisy environment.
Enhancing quantum illumination with highly entangled probes remains an active area of research. In this context, non-Gaussian operations provide an effective route for engineering probe states that can surpass the standard two-mode squeezed state (TMSS). In this work, we investigate a specific nonlocal non-Gaussian operation protocol and show that the engineered state using this protocol outperforms previously considered local non-Gaussian scenarios, engineered based on photon catalysis, addition, and subtraction under realistic conditions, including photon loss. Furthermore, by employing a 50:50 beam splitter with photon-number difference detection, we demonstrate a significant enhancement in the signal-to-noise ratio (SNR) for target detection relative to the TMSS. Thus, our protocol exhibits improved performance, highlighting a resource-efficient and experimentally feasible probe for enhanced quantum illumination.
The signal-to-noise ratios (SNRs) of three Gaussian-state ghost-imaging configurations---distinguished by the nature of their light sources---are derived. Two use classical-state light, specifically a joint signal-reference field state that has either the maximum phase-insensitive or the maximum phase-sensitive cross correlation consistent with having a proper P representation. The third uses nonclassical light, in particular an entangled signal-reference field state with the maximum phase-sensitive cross correlation permitted by quantum mechanics. Analytic SNR expressions are developed for the near-field and far-field regimes, within which simple asymptotic approximations are presented for low-brightness and high-brightness sources. A high-brightness thermal-state (classical phase-insensitive state) source will typically achieve a higher SNR than a biphoton-state (low-brightness, low-flux limit of the entangled-state) source, when all other system parameters are equal for the two systems. With high efficiency photon-number-resolving detectors, a low-brightness, high-flux entangled-state source may achieve a higher SNR than that obtained with a high-brightness thermal-state source.
Correlated-photon imaging, popularly known as ghost imaging, is a technique whereby an image is formed from light that has never interacted with the object. In ghost imaging experiments two correlated light fields are produced. One of these fields illuminates the object, and the other field is measured by a spatially resolving detector. In the quantum regime, these correlated light fields are produced by entangled photons created by spontaneous parametric down-conversion. To date, all correlated-photon ghost-imaging experiments have scanned a single-pixel detector through the field of view to obtain the spatial information. However, scanning leads to a poor sampling efficiency, which scales inversely with the number of pixels, N, in the image. In this work we overcome this limitation by using a time-gated camera to record the single-photon events across the full scene. We obtain high-contrast images, 90%, in either the image plane or the far-field of the photon pair source, taking advantage of the EPR-like correlations in position and momentum of the photon pairs. Our images contain a large number of modes, >500, creating opportunities in low-light-level imaging and in quantum information processing.
The theory of partial coherence has a long and storied history in classical statistical optics. The vast majority of this work addresses fields that are statistically stationary in time, hence their complex envelopes only have phase-insensitive correlations. The quantum optics of squeezed-state generation, however, depends on nonlinear interactions producing baseband field operators with phase-insensitive and phase-sensitive correlations. Utilizing quantum light to enhance imaging has been a topic of considerable current interest, much of it involving biphotons, i.e., streams of entangled-photon pairs. Biphotons have been employed for quantum versions of optical coherence tomography, ghost imaging, holography, and lithography. However, their seemingly quantum features have been mimicked with classical-state light, questioning wherein lies the classical-quantum boundary. We have shown, for the case of Gaussian-state light, that this boundary is intimately connected to the theory of phase-sensitive partial coherence. Here we present that theory, contrasting it with the familiar case of phase-insensitive partial coherence, and use it to elucidate the classical-quantum boundary of ghost imaging. We show, both theoretically and experimentally, that classical phase-sensitive light produces ghost images most closely mimicking those obtained with biphotons, and we derive the spatial resolution, image contrast, and signal-to-noise ratio of a standoff-sensing ghost imager, taking into account target-induced speckle.