Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IOP Conference Series Materials Science and Engineering

First cryogenic test results of 3D-printed resonators for quantum bits

Paul R. Carriere, P. Frigola, Ronald Agustsson, M H Chou, Andrew N. Cleland, Tim Horn, Michael Joseph Kelly, Sergey Kutsaev, Rhys G. Povey, A. Smirnov

Published May 1, 2022• 3 citations
Publisher

Abstract

Abstract Quantum computers (QC) have the potential to efficiently solve problems currently unfeasible on even the fastest generation of classical computers. The building block of a QC is a quantum bit (qubit). Encoding and reading qubit states coupled via high-Q resonant cavity modes is a solution to maintaining qubit states; however there is a need for simple, scalable and robust fabrication techniques capable of realizing high density cavity arrays. RadiaBeam is developing a novel approach utilizing metal additive manufacturing(AM) using both laser and electron beam powder bed fusion. Using a 6GHz quarter wave resonator (QWR), we fabricated several niobium and titanium alloy QWR cavities and characterized their superconducting RF performance. In this letter, we provide the details of the first 3D-printed qubit cavities design and fabrication, and compare their Q-factors, measured at dilution fridge temperatures, against the machined Nb resonators.

DOI
10.1088/1757-899x/1241/1/012046

Related papers

Niobium quarter-wave resonator with the optimized shape for quantum information systems

Sergey Kutsaev, Kirill Taletski, Ronald Agustsson +6 more

Abstract Quantum computers (QC), if realized, could disrupt many computationally intense fields of science. The building block element of a QC is a quantum bit (qubit). Qubits enable the use of quantum superposition and multi-state entanglement in QC calculations, allowing a QC to simultaneously perform millions of computations at once. However, quantum states stored in a qubit degrade with decreased quality factors and interactions with the environment. One technical solution to improve qubit lifetimes and network interactions is a circuit comprised of a Josephson junction-based qubit located inside of a high Q-factor superconducting 3D cavity. It is known that niobium resonators can reach $Q_{0}>10^{11}$ Q0>1011 . However, existing cavity geometries are optimized for particle acceleration rather than hosting qubits. RadiaBeam Technologies, in collaboration with Argonne National Laboratory and The University of Chicago, has developed a niobium superconducting radio frequency quarter-wave resonant cavity (QWR) for quantum computation. A 6 GHz QWR was optimized to include tapering of the inner and outer conductors, a toroidal shape for the resonator shorting plane, and an inner conductor tip to reduce parasitic capacitance. In this paper, we present the results of the resonator design optimization, fabrication, processing, and testing.

EPJ Quantum Technology•Apr 17, 2020•23 citations

Enhancing the Q-Factor of a Practical Qubit Niobium Three-Dimensional λ/4-Resonator Through Surface Treatment

Sergey Kutsaev, R. Agustsson, Aurora Cecilia Araujo Martínez +13 more

Quantum computing stands as a revolutionary frontier in information technology, with the potential to solve complex problems far beyond the capacity of classical computers. At the heart of this disruptive innovation are qubits, forming the fundamental backbone of quantum computing. A leading-edge solution for constructing robust, enduring qubits involves embedding a Josephson junction within a high Q-factor, superconducting three-dimensional cavity. Our recent innovation lies in developing a uniquely optimized, quarter-wave resonator-based superconducting cavity, functioning at 6 GHz, specifically tailored for quantum computers. In this work, we elucidate our advancement towards elevating the Q-factor tenfold, an achievement made possible through the enhancement of machining precision, the application of rigorous postprocessing techniques—including mechanical, chemical, and surface treatments—as well as the refinement of our testing methods.

IEEE Transactions on Applied Superconductivity•Jan 16, 2024•3 citations

Design, Simulation, and Experimental Validation of 3D Resonant Cavities for CryoCMOS and Superconducting Qubit Readout

Beatriz Sacramento, Ednilson Lopes, Francisco P. M. Rouxinol

Three-dimensional microwave cavities are key components for superconducting-qubit readout and for the characterization of cryogenic microwave electronics [1]. In this work, we report the design, simulation, fabrication, and experimental validation of a rectangular 3D resonant cavity targeting operation near 5.4 GHz, compatible with the frequency range of CryoCMOS voltage-controlled oscillators (VCO). The cavity dimensions were obtained from analytical mode calculations, corrected for practical machining constraints, and validated using finite-element electromagnetic simulations in ANSYS HFSS. A split-block aluminum cavity was fabricated and characterized at room temperature using vector network analysis. The measured resonances agree with analytical and simulated predictions within sub-1% deviation, confirming the accuracy of the design procedure. Different SMA connector penetration configurations were experimentally investigated to evaluate the trade-off between loaded quality factor and transmission efficiency. The asymmetric $7 \mathrm{~mm} / 8 \mathrm{~mm}$ configuration provided the best compromise, yielding a loaded quality factor of approximately 3200 and improving the transmitted signal by about 20 dB compared with the symmetric $\mathrm{7 ~ m m} / \mathrm{7 ~ m m}$ configuration. These results demonstrate a reproducible design route for 3D cavities intended for CryoCMOS testing and future superconducting-qubit readout experiments.

Symposium on Microelectronics Technology and Devices•Aug 1, 2026•0 citations

Development of high quality superconducting resonators for quantum device applications

Dong-Gwang Ha, Seon Hoo Kim, So-Yeon Jun +5 more

We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•0 citations

Demonstration of superconducting micromachined cavities

T. Brecht, Matthew J. Reagor, Yiwen Chu +5 more

Superconducting enclosures will be key components of scalable quantum computing devices based on circuit quantum electrodynamics. Within a densely integrated device, they can protect qubits from noise and serve as quantum memory units. Whether constructed by machining bulk pieces of metal or microfabricating wafers, 3D enclosures are typically assembled from two or more parts. The resulting seams potentially dissipate crossing currents and limit performance. In this letter, we present measured quality factors of superconducting cavity resonators of several materials, dimensions, and seam locations. We observe that superconducting indium can be a low-loss RF conductor and form low-loss seams. Leveraging this, we create a superconducting micromachined resonator with indium that has a quality factor of two million, despite a greatly reduced mode volume. Inter-layer coupling to this type of resonator is achieved by an aperture located under a planar transmission line. The described techniques demonstrate a proof-of-principle for multilayer microwave integrated quantum circuits for scalable quantum computing.

arXiv:1509.01119•Applied Physics Letters•Nov 9, 2015•88 citations

Developing Best Practice Fabrication for Niobium Superconducting Devices

Jadrien T. Paustian

Superconducting qubits are a leading platform for scalable quantum computation. This platform offers high gate speeds and can make use of readily scalable complementary metal-oxide semiconductor (CMOS) fabrication techniques. However, superconducting qubits are susceptible to a variety of losses that arise in systems with superconductors, such as due to ubiquitous two-level systems, quasiparticles, and more. Designing fabrication processes to mitigate and manage these loss sources is critical to achieving scalable quantum computation. However, many of these loss sources are set during fabrication processing, of which there can be many different steps, each with its own parameter space. Exploring this space with qubits would be prohibitively time-consuming. Coplanar waveguide resonators provide a suitable proxy system for minimizing loss while costing less time and money to fabricate and measure. In this thesis, we explore the results of such an optimization performed on niobium resonators. Niobium is a widely used material platform for superconducting qubit circuits. We report highly consistent state-of-the-art resonator quality factors, with clear improvements over the previous fabrication recipe, and correlate the observed improvements to the internal quality factors with microstructural changes induced by hydrofluoric acid treatment, photoresist stripping, and choice of sputter deposition conditions. Additionally, we provide a detailed description of our fab process to ensure reproducibility in other lab facilities. Finally, we address some intriguing anomalies uncovered in temperature-dependent quality factors of the niobium resonators and show a correlation of the quality factors with compressive film stress.

•Dec 24, 2025•0 citations
Abstract Quantum computers (QC) have the potential to efficiently solve problems currently unfeasible on even the fastest generation of classical computers. The building block of a QC is a quantum bit (qubit). Encoding and reading qubit states coupled via high-Q resonant cavity modes is a solution to maintaining qubit states; however there is a need for simple, scalable and robust fabrication techniques capable of realizing high density cavity arrays. RadiaBeam is developing a novel approach utilizing metal additive manufacturing(AM) using both laser and electron beam powder bed fusion. Using a 6GHz quarter wave resonator (QWR), we fabricated several niobium and titanium alloy QWR cavities and characterized their superconducting RF performance. In this letter, we provide the details of the first 3D-printed qubit cavities design and fabrication, and compare their Q-factors, measured at dilution fridge temperatures, against the machined Nb resonators.
Abstract Quantum computers (QC), if realized, could disrupt many computationally intense fields of science. The building block element of a QC is a quantum bit (qubit). Qubits enable the use of quantum superposition and multi-state entanglement in QC calculations, allowing a QC to simultaneously perform millions of computations at once. However, quantum states stored in a qubit degrade with decreased quality factors and interactions with the environment. One technical solution to improve qubit lifetimes and network interactions is a circuit comprised of a Josephson junction-based qubit located inside of a high Q-factor superconducting 3D cavity. It is known that niobium resonators can reach Q0>1011Q_{0}>10^{11}Q0​>1011 Q0>1011 . However, existing cavity geometries are optimized for particle acceleration rather than hosting qubits. RadiaBeam Technologies, in collaboration with Argonne National Laboratory and The University of Chicago, has developed a niobium superconducting radio frequency quarter-wave resonant cavity (QWR) for quantum computation. A 6 GHz QWR was optimized to include tapering of the inner and outer conductors, a toroidal shape for the resonator shorting plane, and an inner conductor tip to reduce parasitic capacitance. In this paper, we present the results of the resonator design optimization, fabrication, processing, and testing.
Quantum computing stands as a revolutionary frontier in information technology, with the potential to solve complex problems far beyond the capacity of classical computers. At the heart of this disruptive innovation are qubits, forming the fundamental backbone of quantum computing. A leading-edge solution for constructing robust, enduring qubits involves embedding a Josephson junction within a high Q-factor, superconducting three-dimensional cavity. Our recent innovation lies in developing a uniquely optimized, quarter-wave resonator-based superconducting cavity, functioning at 6 GHz, specifically tailored for quantum computers. In this work, we elucidate our advancement towards elevating the Q-factor tenfold, an achievement made possible through the enhancement of machining precision, the application of rigorous postprocessing techniques—including mechanical, chemical, and surface treatments—as well as the refinement of our testing methods.
Three-dimensional microwave cavities are key components for superconducting-qubit readout and for the characterization of cryogenic microwave electronics [1]. In this work, we report the design, simulation, fabrication, and experimental validation of a rectangular 3D resonant cavity targeting operation near 5.4 GHz, compatible with the frequency range of CryoCMOS voltage-controlled oscillators (VCO). The cavity dimensions were obtained from analytical mode calculations, corrected for practical machining constraints, and validated using finite-element electromagnetic simulations in ANSYS HFSS. A split-block aluminum cavity was fabricated and characterized at room temperature using vector network analysis. The measured resonances agree with analytical and simulated predictions within sub-1% deviation, confirming the accuracy of the design procedure. Different SMA connector penetration configurations were experimentally investigated to evaluate the trade-off between loaded quality factor and transmission efficiency. The asymmetric 7 mm/8 mm7 \mathrm{~mm} / 8 \mathrm{~mm}7 mm/8 mm configuration provided the best compromise, yielding a loaded quality factor of approximately 3200 and improving the transmitted signal by about 20 dB compared with the symmetric 7 mm/7 mm\mathrm{7 ~ m m} / \mathrm{7 ~ m m}7 mm/7 mm configuration. These results demonstrate a reproducible design route for 3D cavities intended for CryoCMOS testing and future superconducting-qubit readout experiments.
We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.
Superconducting enclosures will be key components of scalable quantum computing devices based on circuit quantum electrodynamics. Within a densely integrated device, they can protect qubits from noise and serve as quantum memory units. Whether constructed by machining bulk pieces of metal or microfabricating wafers, 3D enclosures are typically assembled from two or more parts. The resulting seams potentially dissipate crossing currents and limit performance. In this letter, we present measured quality factors of superconducting cavity resonators of several materials, dimensions, and seam locations. We observe that superconducting indium can be a low-loss RF conductor and form low-loss seams. Leveraging this, we create a superconducting micromachined resonator with indium that has a quality factor of two million, despite a greatly reduced mode volume. Inter-layer coupling to this type of resonator is achieved by an aperture located under a planar transmission line. The described techniques demonstrate a proof-of-principle for multilayer microwave integrated quantum circuits for scalable quantum computing.
Superconducting qubits are a leading platform for scalable quantum computation. This platform offers high gate speeds and can make use of readily scalable complementary metal-oxide semiconductor (CMOS) fabrication techniques. However, superconducting qubits are susceptible to a variety of losses that arise in systems with superconductors, such as due to ubiquitous two-level systems, quasiparticles, and more. Designing fabrication processes to mitigate and manage these loss sources is critical to achieving scalable quantum computation. However, many of these loss sources are set during fabrication processing, of which there can be many different steps, each with its own parameter space. Exploring this space with qubits would be prohibitively time-consuming. Coplanar waveguide resonators provide a suitable proxy system for minimizing loss while costing less time and money to fabricate and measure. In this thesis, we explore the results of such an optimization performed on niobium resonators. Niobium is a widely used material platform for superconducting qubit circuits. We report highly consistent state-of-the-art resonator quality factors, with clear improvements over the previous fabrication recipe, and correlate the observed improvements to the internal quality factors with microstructural changes induced by hydrofluoric acid treatment, photoresist stripping, and choice of sputter deposition conditions. Additionally, we provide a detailed description of our fab process to ensure reproducibility in other lab facilities. Finally, we address some intriguing anomalies uncovered in temperature-dependent quality factors of the niobium resonators and show a correlation of the quality factors with compressive film stress.