Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Routledge eBooks

A novel Encoding/Decoding scheme with Belief Propagation and LDPC code

Prashnatita Pal, Bikash Chandra Sahana, Jayanta Poray

Published Jun 14, 2022• 0 citations
Publisher

Abstract

Encoding/decoding plays an important role in the reliability and success of modern data communication, as this becomes an integral part of our daily lives. However, by its inherent nature, the data communication systems are most vulnerable to errors. In communication, the errors mainly occur across the channels and its effect is very severe at times. Depending on the type of error, the code word transmitted across the channel can be partially or totally changed. So, the information transmitted can be lost permanently due to error. The concept of error correction is to introduce redundant data in the information during the transfer of data. The receiver can check the redundant data in the received message and can determine the consistency of the sent message. It can also check the redundant data to detect the transmitted errors in the message and can correct the errors if any. In this context, the principle of loopy Belief Propagation has been used by the Low-Density Parity Check (LDPC) codes. This code comes with an excellent error correction performance. The goal of this paper is to set up a framework to describe the LDPC code constraints, compute probabilities in trellises and finally generate transfer vectors for Loopy Belief Propagation model.

DOI
10.1201/9781003340867-22

Related papers

Error-Control Coding Algorithms and Architecture for Modern Applications Powered by LDPC Codes and Belief Propagation

Prashnatita Pal, Bikash Chandra Sahana, Jayanta Poray +1 more

In modern data communication system Error Detection and Correction has great practical importance to maintain the data integrity across the noisy channel. To deal with this challenge, the theory of Error detection and correction need to get one's precise attention. To retrieve the original data, an efficient process is required. A class of error correcting codes which performs iterative decoding inside a graph is considered which can provide a good approximation. In this context Low Density Parity Check (LDPC) code comes with an excellent error correction performance. In this paper architecture and algorithms for Error Detection and Correction method based on LDPC code is proposed. Also, a simulator for the proposed algorithms is designed and tested successfully.

International Conference on Computing for Sustainable Global Development•Mar 23, 2022•2 citations

Decoding LDPC Codes with Probabilistic Local Maximum Likelihood Bit Flipping

Rejoy Roy Mathews

Communication channels are inherently noisy making error correction coding a major topic of research for modern communication systems. Error correction coding is the addition of redundancy to information transmitted over communication channels to enable detection and recovery of erroneous information. Low-density parity-check (LDPC) codes are a class of error correcting codes that have been effective in maintaining reliability of information transmitted over communication channels. Multiple algorithms have been developed to benefit from the LDPC coding scheme to improve recovery of erroneous information. This work develops a matrix construction that stores the information error probability statistics for a communication channel. This combined with the error correcting capability of LDPC codes enabled the development of the Probabilistic Local Maximum Likelihood Bit Flipping (PLMLBF) algorithm, which is the focus of this research work.

International Symposium on Information Theory and its Applications•Mar 9, 2020•1 citation

Linear-time encoding and decoding of low-density parity-check codes

Mikael Simberg

Low-density parity-check (LDPC) codes had a renaissance when they were rediscovered in the 1990’s. Since then LDPC codes have been an important part of the field of error-correcting codes, and have been shown to be able to approach the Shannon capacity, the limit at which we can reliably transmit information over noisy channels. Following this, many modern communications standards have adopted LDPC codes. Error-correction is equally important in protecting data from corruption on a hard-drive as it is in deep-space communications. It is most commonly used for example for reliable wireless transmission of data to mobile devices. For practical purposes, both encoding and decoding need to be of low complexity to achieve high throughput and low power consumption. This thesis provides a literature review of the current state-of-the-art in encoding and decoding of LDPC codes. Message- passing decoders are still capable of achieving the best error-correcting performance, while more recently considered bit-flipping decoders are providing a low-complexity alternative, albeit with some loss in error-correcting performance. An implementation of a low-complexity stochastic bit-flipping decoder is also presented. It is implemented for Graphics Processing Units (GPUs) in a parallel fashion, providing a peak throughput of 1.2 Gb/s, which is significantly higher than previous decoder implementations on GPUs. The error-correcting performance of a range of decoders has also been tested, showing that the stochastic bit-flipping decoder provides relatively good error-correcting performance with low complexity. Finally, a brief comparison of encoding complexities for two code ensembles is also presented.

•Jan 20, 2015•0 citations

Novel LDPC coding and decoding strategies : design, analysis, and algorithms

Jingjing Liu

In this digital era, modern communication systems play an essential part in nearly every aspect of life, with examples ranging from mobile networks and satellite communications to Internet and data transfer. Unfortunately, all communication systems in a practical setting are noisy, which indicates that we can either improve the physical characteristics of the channel or find a possible systematical solution, i.e. error control coding. The history of error control coding dates back to 1948 when Claude Shannon published his celebrated work “A Mathematical Theory of Communication”, which built a framework for channel coding, source coding and information theory. For the first time, we saw evidence for the existence of channel codes, which enable reliable communication as long as the information rate of the code does not surpass the so-called channel capacity. Nevertheless, in the following 60 years none of the codes have been proven closely to approach the theoretical bound until the arrival of turbo codes and the renaissance of LDPC codes. As a strong contender of turbo codes, the advantages of LDPC codes include parallel implementation of decoding algorithms and, more crucially, graphical construction of codes. However, there are also some drawbacks to LDPC codes, e.g. significant performance degradation due to the presence of short cycles or very high decoding latency. In this thesis, we will focus on the practical realisation of finite-length LDPC codes and devise algorithms to tackle those issues. \n \nFirstly, rate-compatible (RC) LDPC codes with short/moderate block lengths are investigated on the basis of optimising the graphical structure of the tanner graph (TG), in order to achieve a variety of code rates (0.1 < R < 0.9) by only using a single encoder-decoder pair. As is widely recognised in the literature, the presence of short cycles considerably reduces the overall performance of LDPC codes which significantly limits their application in communication systems. To reduce the impact of short cycles effectively for different code rates, algorithms for counting short cycles and a graph-related metric called Extrinsic Message Degree (EMD) are applied with the development of the proposed puncturing and extension techniques. A complete set of simulations are carried out to demonstrate that the proposed RC designs can largely minimise the performance loss caused by puncturing or extension. \n \nSecondly, at the decoding end, we study novel decoding strategies which compensate for the negative effect of short cycles by reweighting part of the extrinsic messages exchanged between the nodes of a TG. The proposed reweighted belief propagation (BP) algorithms aim to implement efficient decoding, i.e. accurate signal reconstruction and low decoding latency, for LDPC codes via various design methods. A variable factor appearance probability belief propagation (VFAP-BP) algorithm is proposed along with an improved version called a locally-optimized reweighted (LOW)-BP algorithm, both of which can be employed to enhance decoding performance significantly for regular and irregular LDPC codes. More importantly, the optimisation of reweighting parameters only takes place in an offline stage so that no additional computational complexity is required during the real-time decoding process. \n \nLastly, two iterative detection and decoding (IDD) receivers are presented for multiple-input multiple-output (MIMO) systems operating in a spatial multiplexing configuration. QR decomposition (QRD)-type IDD receivers utilise the proposed multiple-feedback (MF)-QRD or variable-M (VM)-QRD detection algorithm with a standard BP decoding algorithm, while knowledge-aided (KA)-type receivers are equipped with a simple soft parallel interference cancellation (PIC) detector and the proposed reweighted BP decoders. In the uncoded scenario, the proposed MF-QRD and VM-QRD algorithms are shown to approach optimal performance, yet require a reduced computational complexity. In the LDPC-coded scenario, simulation results have illustrated that the proposed QRD-type IDD receivers can offer near-optimal performance after a small number of detection/decoding iterations and the proposed KA-type IDD receivers significantly outperform receivers using alternative decoding algorithms, while requiring similar decoding complexity.

•Dec 18, 2012•2 citations

Belief-propagation with information correction: improved near maximum-likelihood decoding of low-density parity-check codes

Nedeljko Varnica, M.P.C. Fossorier

We propose an improved belief-propagation (BP) decoder for low-density parity-check (LDPC) codes based on channel information correction. We show that our algorithm achieves sizeable performance gains (in waterfall and error floor regions) compared to the standard BP decoder. We verify by examples that the proposed decoder almost achieves the maximum-likelihood decoding performance for short LDPC codes

IEEE International Symposium on Information Theory (ISIT)•Dec 23, 2004•18 citations

Computation of Parity Check Matrices for Binary EG-LDPC Codes used in Communication Systems

Jyothi Chinna Babu, C. Chinnapu Reddy

The Low Density Parity Check (LDPC) are direct codes, which are true block and Shannon Limit codes.These codes are attained least error floors of data bits for data transfer applications used in communication systems.However, the proposed LDPC codes are more beneficial than Turbo codes because of reduction in the decoding complexity and detection of the errors in less cycle time.This results the reduction of decoding time, low decoding latency, complexity and as well as least error floorings in communication, when the transmitted data contains multiple error bits.This paper is proposed to represent the majority logic decoding/detecting of LDPC codes.This paper proposes the Generation of Originator and Parity estimated matrices for the Binary LDPC Codes.Here, the proposed techniques are hard decision decrypting and soft decision decrypting schemes.These schemes uses majority logic decoding based on the data transmission and reception in communication channel.This paper also elaborates the effective calculation of Euclidean distance and algorithm for constructing the LDPC codes.

Helix•Feb 28, 2019•0 citations
Encoding/decoding plays an important role in the reliability and success of modern data communication, as this becomes an integral part of our daily lives. However, by its inherent nature, the data communication systems are most vulnerable to errors. In communication, the errors mainly occur across the channels and its effect is very severe at times. Depending on the type of error, the code word transmitted across the channel can be partially or totally changed. So, the information transmitted can be lost permanently due to error. The concept of error correction is to introduce redundant data in the information during the transfer of data. The receiver can check the redundant data in the received message and can determine the consistency of the sent message. It can also check the redundant data to detect the transmitted errors in the message and can correct the errors if any. In this context, the principle of loopy Belief Propagation has been used by the Low-Density Parity Check (LDPC) codes. This code comes with an excellent error correction performance. The goal of this paper is to set up a framework to describe the LDPC code constraints, compute probabilities in trellises and finally generate transfer vectors for Loopy Belief Propagation model.
In modern data communication system Error Detection and Correction has great practical importance to maintain the data integrity across the noisy channel. To deal with this challenge, the theory of Error detection and correction need to get one's precise attention. To retrieve the original data, an efficient process is required. A class of error correcting codes which performs iterative decoding inside a graph is considered which can provide a good approximation. In this context Low Density Parity Check (LDPC) code comes with an excellent error correction performance. In this paper architecture and algorithms for Error Detection and Correction method based on LDPC code is proposed. Also, a simulator for the proposed algorithms is designed and tested successfully.
Communication channels are inherently noisy making error correction coding a major topic of research for modern communication systems. Error correction coding is the addition of redundancy to information transmitted over communication channels to enable detection and recovery of erroneous information. Low-density parity-check (LDPC) codes are a class of error correcting codes that have been effective in maintaining reliability of information transmitted over communication channels. Multiple algorithms have been developed to benefit from the LDPC coding scheme to improve recovery of erroneous information. This work develops a matrix construction that stores the information error probability statistics for a communication channel. This combined with the error correcting capability of LDPC codes enabled the development of the Probabilistic Local Maximum Likelihood Bit Flipping (PLMLBF) algorithm, which is the focus of this research work.
Low-density parity-check (LDPC) codes had a renaissance when they were rediscovered in the 1990’s. Since then LDPC codes have been an important part of the field of error-correcting codes, and have been shown to be able to approach the Shannon capacity, the limit at which we can reliably transmit information over noisy channels. Following this, many modern communications standards have adopted LDPC codes. Error-correction is equally important in protecting data from corruption on a hard-drive as it is in deep-space communications. It is most commonly used for example for reliable wireless transmission of data to mobile devices. For practical purposes, both encoding and decoding need to be of low complexity to achieve high throughput and low power consumption. This thesis provides a literature review of the current state-of-the-art in encoding and decoding of LDPC codes. Message- passing decoders are still capable of achieving the best error-correcting performance, while more recently considered bit-flipping decoders are providing a low-complexity alternative, albeit with some loss in error-correcting performance. An implementation of a low-complexity stochastic bit-flipping decoder is also presented. It is implemented for Graphics Processing Units (GPUs) in a parallel fashion, providing a peak throughput of 1.2 Gb/s, which is significantly higher than previous decoder implementations on GPUs. The error-correcting performance of a range of decoders has also been tested, showing that the stochastic bit-flipping decoder provides relatively good error-correcting performance with low complexity. Finally, a brief comparison of encoding complexities for two code ensembles is also presented.
In this digital era, modern communication systems play an essential part in nearly every aspect of life, with examples ranging from mobile networks and satellite communications to Internet and data transfer. Unfortunately, all communication systems in a practical setting are noisy, which indicates that we can either improve the physical characteristics of the channel or find a possible systematical solution, i.e. error control coding. The history of error control coding dates back to 1948 when Claude Shannon published his celebrated work “A Mathematical Theory of Communication”, which built a framework for channel coding, source coding and information theory. For the first time, we saw evidence for the existence of channel codes, which enable reliable communication as long as the information rate of the code does not surpass the so-called channel capacity. Nevertheless, in the following 60 years none of the codes have been proven closely to approach the theoretical bound until the arrival of turbo codes and the renaissance of LDPC codes. As a strong contender of turbo codes, the advantages of LDPC codes include parallel implementation of decoding algorithms and, more crucially, graphical construction of codes. However, there are also some drawbacks to LDPC codes, e.g. significant performance degradation due to the presence of short cycles or very high decoding latency. In this thesis, we will focus on the practical realisation of finite-length LDPC codes and devise algorithms to tackle those issues. \n \nFirstly, rate-compatible (RC) LDPC codes with short/moderate block lengths are investigated on the basis of optimising the graphical structure of the tanner graph (TG), in order to achieve a variety of code rates (0.1 < R < 0.9) by only using a single encoder-decoder pair. As is widely recognised in the literature, the presence of short cycles considerably reduces the overall performance of LDPC codes which significantly limits their application in communication systems. To reduce the impact of short cycles effectively for different code rates, algorithms for counting short cycles and a graph-related metric called Extrinsic Message Degree (EMD) are applied with the development of the proposed puncturing and extension techniques. A complete set of simulations are carried out to demonstrate that the proposed RC designs can largely minimise the performance loss caused by puncturing or extension. \n \nSecondly, at the decoding end, we study novel decoding strategies which compensate for the negative effect of short cycles by reweighting part of the extrinsic messages exchanged between the nodes of a TG. The proposed reweighted belief propagation (BP) algorithms aim to implement efficient decoding, i.e. accurate signal reconstruction and low decoding latency, for LDPC codes via various design methods. A variable factor appearance probability belief propagation (VFAP-BP) algorithm is proposed along with an improved version called a locally-optimized reweighted (LOW)-BP algorithm, both of which can be employed to enhance decoding performance significantly for regular and irregular LDPC codes. More importantly, the optimisation of reweighting parameters only takes place in an offline stage so that no additional computational complexity is required during the real-time decoding process. \n \nLastly, two iterative detection and decoding (IDD) receivers are presented for multiple-input multiple-output (MIMO) systems operating in a spatial multiplexing configuration. QR decomposition (QRD)-type IDD receivers utilise the proposed multiple-feedback (MF)-QRD or variable-M (VM)-QRD detection algorithm with a standard BP decoding algorithm, while knowledge-aided (KA)-type receivers are equipped with a simple soft parallel interference cancellation (PIC) detector and the proposed reweighted BP decoders. In the uncoded scenario, the proposed MF-QRD and VM-QRD algorithms are shown to approach optimal performance, yet require a reduced computational complexity. In the LDPC-coded scenario, simulation results have illustrated that the proposed QRD-type IDD receivers can offer near-optimal performance after a small number of detection/decoding iterations and the proposed KA-type IDD receivers significantly outperform receivers using alternative decoding algorithms, while requiring similar decoding complexity.
The Low Density Parity Check (LDPC) are direct codes, which are true block and Shannon Limit codes.These codes are attained least error floors of data bits for data transfer applications used in communication systems.However, the proposed LDPC codes are more beneficial than Turbo codes because of reduction in the decoding complexity and detection of the errors in less cycle time.This results the reduction of decoding time, low decoding latency, complexity and as well as least error floorings in communication, when the transmitted data contains multiple error bits.This paper is proposed to represent the majority logic decoding/detecting of LDPC codes.This paper proposes the Generation of Originator and Parity estimated matrices for the Binary LDPC Codes.Here, the proposed techniques are hard decision decrypting and soft decision decrypting schemes.These schemes uses majority logic decoding based on the data transmission and reception in communication channel.This paper also elaborates the effective calculation of Euclidean distance and algorithm for constructing the LDPC codes.