Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Linear-time encoding and decoding of low-density parity-check codes

Mikael Simberg

Published Jan 20, 2015• 0 citations
OpenAlex

Abstract

Low-density parity-check (LDPC) codes had a renaissance when they were rediscovered in the 1990’s. Since then LDPC codes have been an important part of the field of error-correcting codes, and have been shown to be able to approach the Shannon capacity, the limit at which we can reliably transmit information over noisy channels. Following this, many modern communications standards have adopted LDPC codes. Error-correction is equally important in protecting data from corruption on a hard-drive as it is in deep-space communications. It is most commonly used for example for reliable wireless transmission of data to mobile devices. For practical purposes, both encoding and decoding need to be of low complexity to achieve high throughput and low power consumption. This thesis provides a literature review of the current state-of-the-art in encoding and decoding of LDPC codes. Message- passing decoders are still capable of achieving the best error-correcting performance, while more recently considered bit-flipping decoders are providing a low-complexity alternative, albeit with some loss in error-correcting performance. An implementation of a low-complexity stochastic bit-flipping decoder is also presented. It is implemented for Graphics Processing Units (GPUs) in a parallel fashion, providing a peak throughput of 1.2 Gb/s, which is significantly higher than previous decoder implementations on GPUs. The error-correcting performance of a range of decoders has also been tested, showing that the stochastic bit-flipping decoder provides relatively good error-correcting performance with low complexity. Finally, a brief comparison of encoding complexities for two code ensembles is also presented.

Related papers

Efficient algorithms for stochastic decoding of LDPC codes

Kuo-Lun Huang

The expanding demand for high-speed communications has resulted in development of high-throughput error-correcting techniques required by emerging communication standards. Low-Density Parity-Check (LDPC) codes are a class of linear block codes that achieve near-capacity performance and have been selected as part of many digital communication standards. Stochastic computation has been proposed as a hardware efficient approach for decoding LDPC codes. Using stochastic computation, all messages in the iterative decoding process are represented by Bernoulli sequences. Computations on these sequences are performed bit-by-bit using simple logic operations. Furthermore, serial messages used in stochastic decoders help alleviate routing congestion in hardware implementation of decoder. These factors make stochastic decoding a low complexity alternative to implement LDPC decoders. In this dissertation, we analyze the characteristics of stochastic decoding and propose reduced-latency designs for stochastic LDPC decoders to achieve improved performance on various channel models.

•Jan 1, 2016•2 citations

A Survey on High-Throughput Non-Binary LDPC Decoders: ASIC, FPGA, and GPU Architectures

Oscar Ferraz, Srinivasan Subramaniyan, Chinthala Ramesh +7 more

Non-binary low-density parity-check (NB-LDPC) codes show higher error-correcting performance than binary low-density parity-check (LDPC) codes when the codeword length is moderate and/or the channel has bursts of errors. The need for high-speed decoders for future digital communications led to the investigation of optimized NB-LDPC decoding algorithms and efficient implementations that target high throughput and low energy consumption levels. We carried out a comprehensive survey of existing NB-LDPC decoding hardware that targets the optimization of these parameters. Even though existing NB-LDPC decoders are optimized with respect to computational complexity and memory requirements, they still lag behind their binary counterparts in terms of throughput, power and area optimization. This study contributes to an overall understanding of the state-of-the-art on application-specific integrated-circuit (ASIC), field-programmable gate array (FPGA) and graphics processing units (GPU) based systems, and highlights the current challenges that still have to be overcome on the path to more efficient NB-LDPC decoder architectures.

IEEE Communications Surveys & Tutorials•Nov 8, 2021•86 citations

Resource efficient flexible architectures for low-density parity-check decoders

Vikram Arkalgud Chandrasetty

Digital communication has become part of most applications we use today.It could be for internet access using WLAN/WiMAX technology or satellite based Digital Video Broadcasting (DVB) or even mobile applications.It may be possible to achieve very high communication bandwidth for these applications.But the problem is with the reliability of information received over the communication channel that is often subjected to noise.The obvious solution to this problem is incorporating error correction techniques in the communication system to correct the errors introduced during transit.One of the best performing error correction codes are Low-Density Parity-Check (LDPC) codes discovered by Gallager in 1962, but these codes only gained popularity over the last decade or so.LDPC codes can achieve excellent bit error rate (BER) performance and are very suitable for next-generation communication systems.Studies have shown that large LDPC codes can achieve BER performance very close to the Shannon Limit.Hence these codes are of paramount interest among the research community.However, practical implementation of high performance LDPC decoders with large code lengths is a challenge faced by designers today due to the huge complexity and hardware resources required.This research aims to reduce the complexity of LDPC decoding algorithms and explore resource efficient architectures for hardware implementation.LDPC decoders are primarily based on iterative algorithms and typically consist of large number of computational nodes, with complex interconnections among the nodes.A fully-parallel implementation of LDPC decoder with large code length can provide high throughput, but is costly in terms of hardware resources required.Even today's high-end FPGAs

•Jan 1, 2012•0 citations

Low-density parity-check codes

Sarah J. Johnson

Introduction In this chapter we introduce low-density parity-check (LDPC) codes, a class of error correction codes proposed by Gallager in his 1962 PhD thesis 12 years after error correction codes were first introduced by Hamming (published in 1950). Both Hamming codes and LDPC codes are block codes: the messages are broken up into blocks to be encoded at the transmitter and similarly decoded as separate blocks at the receiver. While Hamming codes are short and very structured with a known, fixed, error correction ability, LDPC codes are the opposite, usually long and often constructed pseudo-randomly with only a probabilistic notion of their expected error correction performance. The chapter begins by presenting parity bits as a means to detect and, when more than one is employed, to correct errors in digital data. Block error correction codes are described as a linear combination of parity-check equations and thus defined by their parity-check matrix representation. The graphical representation of codes by Tanner graphs is presented and the necessary graph theoretic concepts introduced. In Section 2.4 iterative decoding algorithms are introduced using a hard decision algorithm (bit flipping), so that the topic is developed first without reference to probability theory. Subsequently the sum–product decoding algorithm is presented. This chapter serves as a self-contained introduction to LDPC codes and their decoding. It is intended that the material presented here will enable the reader to implement LDPC encoders and iterative decoders.

Cambridge University Press eBooks•Nov 19, 2009•6 citations

Low-Density Parity-Check Codes: Construction and Implementation

Gabofetswe Malema

Low-density parity-check (LDPC) codes have been shown to have good error correcting performance approaching Shannon’s limit. Good error correcting performance enables efficient and reliable communication. However, a LDPC code decoding algorithm needs to be executed efficiently to meet cost, time, power and bandwidth requirements of target applications. The constructed codes should also meet error rate performance requirements of those applications. Since their rediscovery, there has been much research work on LDPC code construction and implementation. LDPC codes can be designed over a wide space with parameters such as girth, rate and length. There is no unique method of constructing LDPC codes. Existing construction methods are limited in some way in producing good error correcting performing and easily implementable codes for a given rate and length. There is a need to develop methods of constructing codes over a wide range of rates and lengths with good performance and ease of hardware implementability. LDPC code hardware design and implementation depend on the structure of target LDPC code and is also as varied as LDPC matrix designs and constructions. There are several factors to be considered including decoding algorithm computations,processing nodes interconnection network, number of processing nodes, amount of memory, number of quantization bits and decoding delay. All of these issues can be handled in several different ways. \nThis thesis is about construction of LDPC codes and their hardware implementation. LDPC code construction and implementation issues mentioned above are too many to be addressed in one thesis. The main contribution of this thesis is the development of LDPC code construction methods for some classes of structured LDPC codes and techniques for reducing decoding time. We introduce two main methods for constructing structured codes. In the first method, column-weight two LDPC codes are derived from distance graphs. A wide range of girths, rates and lengths are obtained compared to existing methods. The performance and implementation complexity of obtained codes depends on the structure of their corresponding distance graphs. In the second method, a search algorithm based on bit-filing and progressive-edge growth algorithms is introduced for constructing quasi-cyclic LDPC codes. The algorithm can be used to form a distance or Tanner graph of a code. This method could also obtain codes over a wide range of parameters. Cycles of length four are avoided by observing the row-column constraint. \nRow-column connections observing this condition are searched sequentially or randomly. Although the girth conditions are not sufficient beyond six, larger girths codes were easily obtained especially at low rates. The advantage of this algorithm compared to other methods is its flexibility. It could be used to construct codes for a given rate and length with girths of at least six for any sub-matrix configuration or rearrangement. The code size is also easily varied by increasing or decreasing sub-matrix size. Codes obtained using a sequential search criteria show poor performance at low girths (6 and 8) while random searches result in good performing codes. \nQuasi-cyclic codes could be implemented in a variety of decoder architectures. One of the many options is the choice of processing nodes interconnect. We show how quasi-cyclic codes processing could be scheduled through a multistage network. Although these net-works have more delay than other modes of communication, they offer more flexibility at a reasonable cost. Banyan and Benes networks are suggested as the most suitable networks. \nDecoding delay is also one of several issues considered in decoder design and implementation. In this thesis, we overlap check and variable node computations to reduce decoding time. Three techniques are discussed, two of which are introduced in this thesis. The techniques are code matrix permutation, matrix space restriction and sub-matrix row-column scheduling. Matrix permutation rearranges the parity-check matrix such that rows and columns that do not have connections in common are separated. This techniques can be applied to any matrix. Its effectiveness largely depends on the structure of the code. We show that its success also depends on the size of row and column weights. Matrix space restriction is another technique that can be applied to any code and has fixed reduction in time or amount of overlap. Its success depends on the amount of restriction and may be traded with performance loss. The third technique already suggested in literature relies on the internal cyclic structure of sub-matrices to achieve overlapping. The technique is limited to LDPC code matrices in which the number of sub-matrices is equal to row and column weights. We show that it can be applied to other codes with a lager number of sub-matrices than code weights. However, in this case maximum overlap is not guaranteed. We calculate the lower bound on the amount of overlapping. Overlapping could be applied to any sub-matrix configuration of quasi-cyclic codes by arbitrarily choosing \nthe starting rows for processing. Overlapping decoding time depends on inter-iteration waiting times. We show that there are upper bounds on waiting times which depend on the code weights. Waiting times could be further reduced by restricting shifts in identity sub-matrices or using smaller sub-matrices. This overlapping technique can reduce the decoding time by up to 50% compared to conventional message and computation scheduling. \nTechniques of matrix permutation and space restriction results in decoder architectures that are flexible in LDPC code design in terms of code weights and size. This is due to the fact that with these techniques, rows and columns are processed in sequential order to achieve overlapping. However, in the existing technique, all sub-matrices have to be processed in parallel to achieve overlapping. Parallel processing of all code sub-matrices requires the architecture to have the number of processing units at least equal to the number sub-matrices. Processing units and memory space should therefore be distributed among the sub-matrices according to the sub-matrices arrangement. This leads to high complexity or inflexibility in the decoder architecture. We propose a simple, programmable and high throughput decoder architecture based on matrix permutation and space restriction techniques.

•Jan 1, 2007•24 citations

Performance Analysis of LDPC Decoding Techniques

Abdel Halim A. Zikry, Ashraf Yehya Hassan, Wageda I. Shaban +1 more

Low density parity checking codes (LDPC) are one of the most important issues in coding theory at present. LDPC-code are a type of linear-block LDPC-codes. Channel coding might be considered as the finest conversant and most potent components of cellular communications systems, that was employed for transmitting errors corrections imposed by noise, fading and interfering. LDPC-codes are advanced coding gain, i.e., new area in coding. the performances of LDPC-code are similar to the Shannon-limiting, this led to the usage of decoding in several applications in digital communications systems, like DVB-S2 and WLAN802.1..This paper aims to know what is LDPC,what its application and introduce encoding algorithms that gives rise to a linear encoding time and also show that the regular and irregular LDPC performance and also introduce different methods for decoding LDPC. I discuss in detail LDPC decoding algorithm: bit flipping algorithm, as a type from hard decision .belief propagation algorithm, sum product algorithm and minimum sum algorithm as examples from soft decision .I expect that at least some students or researchers involved in researching LDPC codes would find this paper helpful.

International Journal of Recent Technology and Engineering (IJRTE)•Jan 30, 2021•7 citations
Low-density parity-check (LDPC) codes had a renaissance when they were rediscovered in the 1990’s. Since then LDPC codes have been an important part of the field of error-correcting codes, and have been shown to be able to approach the Shannon capacity, the limit at which we can reliably transmit information over noisy channels. Following this, many modern communications standards have adopted LDPC codes. Error-correction is equally important in protecting data from corruption on a hard-drive as it is in deep-space communications. It is most commonly used for example for reliable wireless transmission of data to mobile devices. For practical purposes, both encoding and decoding need to be of low complexity to achieve high throughput and low power consumption. This thesis provides a literature review of the current state-of-the-art in encoding and decoding of LDPC codes. Message- passing decoders are still capable of achieving the best error-correcting performance, while more recently considered bit-flipping decoders are providing a low-complexity alternative, albeit with some loss in error-correcting performance. An implementation of a low-complexity stochastic bit-flipping decoder is also presented. It is implemented for Graphics Processing Units (GPUs) in a parallel fashion, providing a peak throughput of 1.2 Gb/s, which is significantly higher than previous decoder implementations on GPUs. The error-correcting performance of a range of decoders has also been tested, showing that the stochastic bit-flipping decoder provides relatively good error-correcting performance with low complexity. Finally, a brief comparison of encoding complexities for two code ensembles is also presented.
The expanding demand for high-speed communications has resulted in development of high-throughput error-correcting techniques required by emerging communication standards. Low-Density Parity-Check (LDPC) codes are a class of linear block codes that achieve near-capacity performance and have been selected as part of many digital communication standards. Stochastic computation has been proposed as a hardware efficient approach for decoding LDPC codes. Using stochastic computation, all messages in the iterative decoding process are represented by Bernoulli sequences. Computations on these sequences are performed bit-by-bit using simple logic operations. Furthermore, serial messages used in stochastic decoders help alleviate routing congestion in hardware implementation of decoder. These factors make stochastic decoding a low complexity alternative to implement LDPC decoders. In this dissertation, we analyze the characteristics of stochastic decoding and propose reduced-latency designs for stochastic LDPC decoders to achieve improved performance on various channel models.
Non-binary low-density parity-check (NB-LDPC) codes show higher error-correcting performance than binary low-density parity-check (LDPC) codes when the codeword length is moderate and/or the channel has bursts of errors. The need for high-speed decoders for future digital communications led to the investigation of optimized NB-LDPC decoding algorithms and efficient implementations that target high throughput and low energy consumption levels. We carried out a comprehensive survey of existing NB-LDPC decoding hardware that targets the optimization of these parameters. Even though existing NB-LDPC decoders are optimized with respect to computational complexity and memory requirements, they still lag behind their binary counterparts in terms of throughput, power and area optimization. This study contributes to an overall understanding of the state-of-the-art on application-specific integrated-circuit (ASIC), field-programmable gate array (FPGA) and graphics processing units (GPU) based systems, and highlights the current challenges that still have to be overcome on the path to more efficient NB-LDPC decoder architectures.
Digital communication has become part of most applications we use today.It could be for internet access using WLAN/WiMAX technology or satellite based Digital Video Broadcasting (DVB) or even mobile applications.It may be possible to achieve very high communication bandwidth for these applications.But the problem is with the reliability of information received over the communication channel that is often subjected to noise.The obvious solution to this problem is incorporating error correction techniques in the communication system to correct the errors introduced during transit.One of the best performing error correction codes are Low-Density Parity-Check (LDPC) codes discovered by Gallager in 1962, but these codes only gained popularity over the last decade or so.LDPC codes can achieve excellent bit error rate (BER) performance and are very suitable for next-generation communication systems.Studies have shown that large LDPC codes can achieve BER performance very close to the Shannon Limit.Hence these codes are of paramount interest among the research community.However, practical implementation of high performance LDPC decoders with large code lengths is a challenge faced by designers today due to the huge complexity and hardware resources required.This research aims to reduce the complexity of LDPC decoding algorithms and explore resource efficient architectures for hardware implementation.LDPC decoders are primarily based on iterative algorithms and typically consist of large number of computational nodes, with complex interconnections among the nodes.A fully-parallel implementation of LDPC decoder with large code length can provide high throughput, but is costly in terms of hardware resources required.Even today's high-end FPGAs
Introduction In this chapter we introduce low-density parity-check (LDPC) codes, a class of error correction codes proposed by Gallager in his 1962 PhD thesis 12 years after error correction codes were first introduced by Hamming (published in 1950). Both Hamming codes and LDPC codes are block codes: the messages are broken up into blocks to be encoded at the transmitter and similarly decoded as separate blocks at the receiver. While Hamming codes are short and very structured with a known, fixed, error correction ability, LDPC codes are the opposite, usually long and often constructed pseudo-randomly with only a probabilistic notion of their expected error correction performance. The chapter begins by presenting parity bits as a means to detect and, when more than one is employed, to correct errors in digital data. Block error correction codes are described as a linear combination of parity-check equations and thus defined by their parity-check matrix representation. The graphical representation of codes by Tanner graphs is presented and the necessary graph theoretic concepts introduced. In Section 2.4 iterative decoding algorithms are introduced using a hard decision algorithm (bit flipping), so that the topic is developed first without reference to probability theory. Subsequently the sum–product decoding algorithm is presented. This chapter serves as a self-contained introduction to LDPC codes and their decoding. It is intended that the material presented here will enable the reader to implement LDPC encoders and iterative decoders.
Low-density parity-check (LDPC) codes have been shown to have good error correcting performance approaching Shannon’s limit. Good error correcting performance enables efficient and reliable communication. However, a LDPC code decoding algorithm needs to be executed efficiently to meet cost, time, power and bandwidth requirements of target applications. The constructed codes should also meet error rate performance requirements of those applications. Since their rediscovery, there has been much research work on LDPC code construction and implementation. LDPC codes can be designed over a wide space with parameters such as girth, rate and length. There is no unique method of constructing LDPC codes. Existing construction methods are limited in some way in producing good error correcting performing and easily implementable codes for a given rate and length. There is a need to develop methods of constructing codes over a wide range of rates and lengths with good performance and ease of hardware implementability. LDPC code hardware design and implementation depend on the structure of target LDPC code and is also as varied as LDPC matrix designs and constructions. There are several factors to be considered including decoding algorithm computations,processing nodes interconnection network, number of processing nodes, amount of memory, number of quantization bits and decoding delay. All of these issues can be handled in several different ways. \nThis thesis is about construction of LDPC codes and their hardware implementation. LDPC code construction and implementation issues mentioned above are too many to be addressed in one thesis. The main contribution of this thesis is the development of LDPC code construction methods for some classes of structured LDPC codes and techniques for reducing decoding time. We introduce two main methods for constructing structured codes. In the first method, column-weight two LDPC codes are derived from distance graphs. A wide range of girths, rates and lengths are obtained compared to existing methods. The performance and implementation complexity of obtained codes depends on the structure of their corresponding distance graphs. In the second method, a search algorithm based on bit-filing and progressive-edge growth algorithms is introduced for constructing quasi-cyclic LDPC codes. The algorithm can be used to form a distance or Tanner graph of a code. This method could also obtain codes over a wide range of parameters. Cycles of length four are avoided by observing the row-column constraint. \nRow-column connections observing this condition are searched sequentially or randomly. Although the girth conditions are not sufficient beyond six, larger girths codes were easily obtained especially at low rates. The advantage of this algorithm compared to other methods is its flexibility. It could be used to construct codes for a given rate and length with girths of at least six for any sub-matrix configuration or rearrangement. The code size is also easily varied by increasing or decreasing sub-matrix size. Codes obtained using a sequential search criteria show poor performance at low girths (6 and 8) while random searches result in good performing codes. \nQuasi-cyclic codes could be implemented in a variety of decoder architectures. One of the many options is the choice of processing nodes interconnect. We show how quasi-cyclic codes processing could be scheduled through a multistage network. Although these net-works have more delay than other modes of communication, they offer more flexibility at a reasonable cost. Banyan and Benes networks are suggested as the most suitable networks. \nDecoding delay is also one of several issues considered in decoder design and implementation. In this thesis, we overlap check and variable node computations to reduce decoding time. Three techniques are discussed, two of which are introduced in this thesis. The techniques are code matrix permutation, matrix space restriction and sub-matrix row-column scheduling. Matrix permutation rearranges the parity-check matrix such that rows and columns that do not have connections in common are separated. This techniques can be applied to any matrix. Its effectiveness largely depends on the structure of the code. We show that its success also depends on the size of row and column weights. Matrix space restriction is another technique that can be applied to any code and has fixed reduction in time or amount of overlap. Its success depends on the amount of restriction and may be traded with performance loss. The third technique already suggested in literature relies on the internal cyclic structure of sub-matrices to achieve overlapping. The technique is limited to LDPC code matrices in which the number of sub-matrices is equal to row and column weights. We show that it can be applied to other codes with a lager number of sub-matrices than code weights. However, in this case maximum overlap is not guaranteed. We calculate the lower bound on the amount of overlapping. Overlapping could be applied to any sub-matrix configuration of quasi-cyclic codes by arbitrarily choosing \nthe starting rows for processing. Overlapping decoding time depends on inter-iteration waiting times. We show that there are upper bounds on waiting times which depend on the code weights. Waiting times could be further reduced by restricting shifts in identity sub-matrices or using smaller sub-matrices. This overlapping technique can reduce the decoding time by up to 50% compared to conventional message and computation scheduling. \nTechniques of matrix permutation and space restriction results in decoder architectures that are flexible in LDPC code design in terms of code weights and size. This is due to the fact that with these techniques, rows and columns are processed in sequential order to achieve overlapping. However, in the existing technique, all sub-matrices have to be processed in parallel to achieve overlapping. Parallel processing of all code sub-matrices requires the architecture to have the number of processing units at least equal to the number sub-matrices. Processing units and memory space should therefore be distributed among the sub-matrices according to the sub-matrices arrangement. This leads to high complexity or inflexibility in the decoder architecture. We propose a simple, programmable and high throughput decoder architecture based on matrix permutation and space restriction techniques.
Low density parity checking codes (LDPC) are one of the most important issues in coding theory at present. LDPC-code are a type of linear-block LDPC-codes. Channel coding might be considered as the finest conversant and most potent components of cellular communications systems, that was employed for transmitting errors corrections imposed by noise, fading and interfering. LDPC-codes are advanced coding gain, i.e., new area in coding. the performances of LDPC-code are similar to the Shannon-limiting, this led to the usage of decoding in several applications in digital communications systems, like DVB-S2 and WLAN802.1..This paper aims to know what is LDPC,what its application and introduce encoding algorithms that gives rise to a linear encoding time and also show that the regular and irregular LDPC performance and also introduce different methods for decoding LDPC. I discuss in detail LDPC decoding algorithm: bit flipping algorithm, as a type from hard decision .belief propagation algorithm, sum product algorithm and minimum sum algorithm as examples from soft decision .I expect that at least some students or researchers involved in researching LDPC codes would find this paper helpful.