In this work we numerical model series and parallel non‐uniform superconducting quantum interference device (SQUID) array. Previous work has shown that series SQUID array constructed with a random distribution of loop sizes, (i.e. different areas for each SQUID loop) there exists a unique ‘anti‐peak’ at the zero magnetic field for the voltage versus applied magnetic field (V‐B). Similar results extend to a parallel SQUID array where the difference lies in the arrangement of the Josephson junctions. Other system parameter such as bias current, the number of loops, and mutual inductances are varied to demonstrate the change in dynamic range and linearity of the V‐B response. Application of the SQUID array as a low noise amplifier (LNA) would increase link margins and affect the entire communication system. For unmanned aerial vehicles (UAVs), size, weight and power are limited, the SQUID array would allow use of practical ‘electrically small’ antennas that provide acceptable gain.
In this work we numerical model series and parallel non‐uniform superconducting quantum interference device (SQUID) array. Previous work has shown that series SQUID array constructed with a random distribution of loop sizes, (i.e. different areas for each SQUID loop) there exists a unique ‘anti‐peak’ at the zero magnetic field for the voltage versus applied magnetic field (V‐B). Similar results extend to a parallel SQUID array where the difference lies in the arrangement of the Josephson junctions. Other system parameter such as bias current, the number of loops, and mutual inductances are varied to demonstrate the change in dynamic range and linearity of the V‐B response. Application of the SQUID array as a low noise amplifier (LNA) would increase link margins and affect the entire communication system. For unmanned aerial vehicles (UAVs), size, weight and power are limited, the SQUID array would allow use of practical ‘electrically small’ antennas that provide acceptable gain.
Recently, there is a growing interest in non-uniform coupled SQUID devices in the science community. Similar to how antenna array technology has moved from uniform arrays to non-uniform, sparsely populated arrays, the traditional uniform SQUID arrays evolves to an unconventional structure making these mesoscopic quantum devices (for RF reception) a feasible concept. The focus of this work covers theoretical and numerical computations which exploits well-designed coupling schemes to modeling the dynamics of the device where the behavior of the non-periodic voltage response related to the external flux exhibits an anti-peak which is present only around the zero applied magnetic field. It is know that many nonlinear dynamical systems are highly sensitive to small external perturbations, especially when they are near the onset of a bifurcation. Exploring parameter variations, such as; inductive coupling between neighboring elements, unconventional grating and fabrication parameters may lead to a significant performance enhancement. There are theoretical indications that variations in coupling could provide very high dynamic range. Application of these devices with the ability to detect and amplify will result in a new generation of electrically small antennas.
Abstract Designing superconducting electronic devices involves a careful study of all the elements in the circuit, including the superconducting bias leads. In this work, we introduce a theoretical model for two-dimensional (2D) superconducting quantum interference device (SQUID) arrays capable of simulating the voltage-to-magnetic flux response of devices with different bias current configurations. First, we compare uniformly biased and centre biased SQUID arrays by investigating the voltage versus magnetic flux response, maximum transfer function and voltage modulation depth. Then, we calculate the time-averaged fluxoid distributions for one-dimensional (1D) and 2D centre biased arrays. Finally, we study the performance of the two bias current configurations depending on array size, screening parameter, thermal noise strength and kinetic self-inductance fraction. Our calculations reveal: (i) centre biased 1D parallel SQUID arrays present an unusual voltage response caused by the asymmetric fluxoid distribution; (ii) the optimal transfer function of centre biased arrays strongly depends on the number of junctions in parallel; (iii) the performance of centre biased arrays approaches the uniform biased ones when the number of junctions in series exceeds those in parallel; (iv) while the screening parameter and the thermal noise strength clearly affect the device performance, the kinetic to self-inductance fraction seems to play only a secondary role.
We present a theoretical study on the voltage response function 〈V〉 of series arrays of dc superconducting quantum interference devices (SQUIDs) for which the elementary dc SQUID loops vary in size and, possibly, in orientation. If the distribution of the array loop sizes is chosen according to an arithmetic relation, 〈V〉 is not a Φ0-periodic function of the strength of external magnetic field B. For arithmetic arrays the periodicity of 〈V〉 is controlled by the geometry of the array alone and does not depend on spreads in the array junction parameters. If small fluctuations are added to the loop size distribution, 〈V〉 becomes a unique function around a global minimum at B=0 without possessing significant additional minima for finite B. This filter property does not apply for conventional SQUIDs and series arrays of identical or nearly identical SQUID loops. Applications of arithmetic series arrays include the design of current amplifiers and novel quantum interference filters, which possess large voltage swing and low noise level. In particular, quantum interference filters should provide a rather simple and extremely sensitive measurement of the absolute strength of magnetic fields.
This research focuses on conducting an extensive computational investigation and mathematical analysis into the average voltage response of arrays of Superconducting Quantum Interference Devices (SQUIDs). These arrays will serve as the basis for the development of a sensitive, low noise, signifcantly lower Size, Weight and Power (SWaP) antenna integrated with Low-Noise Amplifier (LNA) using the SQUID technology. The goal for this antenna is to be capable of meeting all requirements for Guided Missile Destroyers (DDG) 1000 class ships for Information Operations/Signals Intelligence (IO/SIGINT) applications in Very High Frequency/Ultra High Frequency (V/UHF) bands. The device will increase the listening capability of receivers by moving technology into a new regime of energy detection allowing wider band, smaller size, more sensitive, stealthier systems. The smaller size and greater sensitivity will allow for ships to be "de-cluttered" of their current large dishes and devices, replacing everything with fewer and smaller SQUID antenna devices. The fewer devices present on the deck of a ship, the more invisible the ship will be to enemy forces. We invent new arrays of SQUIDs, optimized for signal detection with very high dynamic range and excellent spur-free dynamic range, while maintaining extreme small size (and low radar cross section), wide bandwidth, and environmentally noise limited sensitivity, effectively shifting the bottle neck of receiver systems forever away from the antenna itself deeper into the receiver chain. To accomplish these goals we develop and validate mathematical models for different designs of SQUID arrays and use them to invent a new device and systems design. This design is capable of significantly exceeding, per size weight and power, state-of-the-art receiver system measures of performance, such as bandwidth, sensitivity, dynamic range, and spurious-free dynamic range.
Arrays of dc-superconducting quantum interference devices (dc-SQUIDs) were investigated, in which each dc-SQUID element has a multiturn input coil. The dependence of flux noise on the number of turns of the input coil was studied for current amplifiers. SQUID arrays were fabricated by a Nb/AlO x /Nb Josephson tunnel junction fabrication process. Results show that the flux noise of the SQUID array amplifier does not depend on the turn number of the input coil. A SQUID array amplifier consisting of 128 dc-SQUID elements was fabricated, in which each element had a 7-turn input coil and a mutual inductance between the input coil and the SQUID loop of 460 pH. This amplifier showed an ultrahigh current resolution of 1 pA/Hz0.5 and a maximum input current of 11 µA for signals of 50 kHz, which is sufficient bandwidth for X-ray detection applications. These values correspond to a large dynamic range of 87 dB. The flux-voltage characteristics of this SQUID array, however, showed asymmetric behavior, which originated from electronic resonance in stray capacitance and the mutual inductance between the SQUID loop and the multiturn input coil.
In this article, an all-NbN superconducting quantum interference device (SQUID) array was developed for future applications by taking advantage of the higher critical temperature of a NbN film compared with Nb. The NbN SQUID array was composed of 100 SQUIDs with equal loop areas connected in series. The array was fabricated on a single-crystal MgO (100) substrate using 3-μm-diameter NbN/AlN/NbN Josephson junctions. The hysteresis and shielding parameters of the SQUID were 0.67 and 0.15, respectively. The SQUIDs in the array were coherently modulated by injecting current in a common flux control line, which resulted in a modulation voltage of 3.54 mV with consistent periodicity and a flux-to-voltage transfer coefficient of 23 mV/Φ0. Using a flux locked loop circuit, the fabricated NbN SQUID array exhibited excellent performance with a low white flux noise of 1.4 μΦ0/√Hz, which included the preamplifier noise.