Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Computational and Mathematical Modeling of Coupled Superconducting Quantum Interference Devices

Susan A. E. Berggren

Published Jan 1, 2012• 13 citations
OpenAlex

Abstract

This research focuses on conducting an extensive computational investigation and mathematical analysis into the average voltage response of arrays of Superconducting Quantum Interference Devices (SQUIDs). These arrays will serve as the basis for the development of a sensitive, low noise, signifcantly lower Size, Weight and Power (SWaP) antenna integrated with Low-Noise Amplifier (LNA) using the SQUID technology. The goal for this antenna is to be capable of meeting all requirements for Guided Missile Destroyers (DDG) 1000 class ships for Information Operations/Signals Intelligence (IO/SIGINT) applications in Very High Frequency/Ultra High Frequency (V/UHF) bands. The device will increase the listening capability of receivers by moving technology into a new regime of energy detection allowing wider band, smaller size, more sensitive, stealthier systems. The smaller size and greater sensitivity will allow for ships to be "de-cluttered" of their current large dishes and devices, replacing everything with fewer and smaller SQUID antenna devices. The fewer devices present on the deck of a ship, the more invisible the ship will be to enemy forces. We invent new arrays of SQUIDs, optimized for signal detection with very high dynamic range and excellent spur-free dynamic range, while maintaining extreme small size (and low radar cross section), wide bandwidth, and environmentally noise limited sensitivity, effectively shifting the bottle neck of receiver systems forever away from the antenna itself deeper into the receiver chain. To accomplish these goals we develop and validate mathematical models for different designs of SQUID arrays and use them to invent a new device and systems design. This design is capable of significantly exceeding, per size weight and power, state-of-the-art receiver system measures of performance, such as bandwidth, sensitivity, dynamic range, and spurious-free dynamic range.

Related papers

The 3 kHz SQUID receiver development

M. B. Simmonds, W. A. Fertig, R. P. Giffard

We have designed and tested a model for a 3 kHz receiver using a superconducting antenna circuit and a SQUID (Superconducting QUantum Interference Device) amplifier. Q factors as high as 6400 have been demonstrated for the resonant antenna, giving it an extremely low intrinsic noise voltage. We have anlayzed and solved various problems of matching between antenna and SQUID, as well as measuring noise, contributed by materials in the surrounding cryostat. We have been able to use feedback from the SQUID amplifier into the antenna to effectively broaden the 3 dB bandwidth to 1200 Hz without raising the noise level of the system significantly. By scaling the results obtained with our model receiver to an antenna volume of .022 M-cubed we have been able to estimate that a noise level of 2.4 x 10 to the -17th power T/(sq.rt. Hz) could be obtained in a 100 Hz bandwidth. (Author)

Final Report•May 1, 1978•0 citations

Novel Coupling Scheme for the Dynamics of Non-Uniform Coupled SQUID

Patrick Longhini, Anna Leese de Escobar, F. Escobar +2 more

Recently, there is a growing interest in non-uniform coupled SQUID devices in the science community. Similar to how antenna array technology has moved from uniform arrays to non-uniform, sparsely populated arrays, the traditional uniform SQUID arrays evolves to an unconventional structure making these mesoscopic quantum devices (for RF reception) a feasible concept. The focus of this work covers theoretical and numerical computations which exploits well-designed coupling schemes to modeling the dynamics of the device where the behavior of the non-periodic voltage response related to the external flux exhibits an anti-peak which is present only around the zero applied magnetic field. It is know that many nonlinear dynamical systems are highly sensitive to small external perturbations, especially when they are near the onset of a bifurcation. Exploring parameter variations, such as; inductive coupling between neighboring elements, unconventional grating and fabrication parameters may lead to a significant performance enhancement. There are theoretical indications that variations in coupling could provide very high dynamic range. Application of these devices with the ability to detect and amplify will result in a new generation of electrically small antennas.

IEEE Transactions on Applied Superconductivity•May 27, 2009•5 citations

Coupled Serial and Parallel Non-uniform SQUIDs

Patrick Longhini, Susan A. E. Berggren, Antonio Palacios +5 more

In this work we numerical model series and parallel non‐uniform superconducting quantum interference device (SQUID) array. Previous work has shown that series SQUID array constructed with a random distribution of loop sizes, (i.e. different areas for each SQUID loop) there exists a unique ‘anti‐peak’ at the zero magnetic field for the voltage versus applied magnetic field (V‐B). Similar results extend to a parallel SQUID array where the difference lies in the arrangement of the Josephson junctions. Other system parameter such as bias current, the number of loops, and mutual inductances are varied to demonstrate the change in dynamic range and linearity of the V‐B response. Application of the SQUID array as a low noise amplifier (LNA) would increase link margins and affect the entire communication system. For unmanned aerial vehicles (UAVs), size, weight and power are limited, the SQUID array would allow use of practical ‘electrically small’ antennas that provide acceptable gain.

AIP conference proceedings•Jan 1, 2011•0 citations

Development of 2-D Bi-SQUID Arrays With High Linearity

Susan A. E. Berggren, G. Prokopenko, Patrick Longhini +11 more

We develop a two-dimensional (2-D) superconducting quantum interference filter (SQIF) array based on the recently introduced high-linearity tri-junction bi-SQUIDs (superconducting quantum interference device). Our bi-SQUID SQIF array design is based on a tight integration of individual bi-SQUID cells sharing inductances with adjacent cells. We provide extensive computer simulations, analysis, and experimental measurements, in which we explore the phase dynamics and linearity of the array voltage response. The nonuniformity in inductances of the bi-SQUIDs produces a pronounced zero-field single antipeak in the voltage response. The antipeak linearity and size can be optimized by varying the critical current of the additional junction of each bi-SQUID. The layout implementation of the tight 2-D array integration leads to a distinct geometrical diamond shape formed by the merged dual bi-SQUID cells. Different-sized 2-D arrays are fabricated using the standard HYPRES niobium 4.5 kA/cm2fabrication process. The measured linearity, power gain, and noise properties will be analyzed for different array sizes and the results will be compared with circuit simulations. We will discuss a design approach for the electrically small magnetic field antenna and low-noise amplifiers with high bandwidth based on these 2-D bi-SQUID SQIF arrays. The results from this work will be used to design chips densely and completely covered in bi-SQUIDs that have optimized parameters such as linearity and power gain.

arXiv:1301.2163•IEEE Transactions on Applied Superconductivity•Jan 29, 2013•44 citations

A low-noise, two-stage DC SQUID amplifier with high bandwidth and dynamic range

R. Cantor, L. P. Lee, Andrei N. Matlashov +1 more

We describe a low-noise, two-stage dc Superconducting QUantum Interference Device (SQUID) amplifier that is designed for applications requiring high bandwidth and dynamic range. The output signal of a low-noise SQUID in the input stage coherently modulates a series array of identical SQUIDs in the output stage via a common modulation line. The input stage is designed so its output signal does not produce multiple modulation periods in the output stage. The output stage is designed to have sufficient gain so the output noise is dominated by the amplified noise of the input SQUID and exceeds the noise of a preamplifier in the room temperature readout electronics. The SQUID amplifier may therefore be operated without flux modulation or any impedance matching network, resulting in a large dynamic range and high bandwidth.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•11 citations

The Microwave SQUID Multiplexer

J. A. B. Mates

This thesis describes a multiplexer of Superconducting Quantum Interference Devices (SQUIDs) with low-noise, ultra-low power dissipation, and great scalability. The multiplexer circuit measures the magnetic flux in a large number of unshunted rf SQUIDs by coupling each SQUID to a superconducting microwave resonator tuned to a unique resonance frequency and driving the resonators from a common feedline. A superposition of microwave tones measures each SQUID simultaneously using only two coaxial cables between the cryogenic device and room temperature. This multiplexer will enable the instrumentation of arrays with hundreds of thousands of low-temperature detectors for new applications in cosmology, materials analysis, and nuclear non-proliferation.\nThe driving application of the Microwave SQUID Multiplexer is the readout of large arrays of superconducting transition-edge sensors, by some figures of merit the most sensitive detectors of electromagnetic signals over a span of more than nine orders of magnitude in energy, from 40 GHz microwaves to 200 keV gamma rays. Modern transition-edge sensors have noise-equivalent power as low as 10-20 W / [square root] Hz and energy resolution as good as 2 eV at 6 keV. These per-pixel sensitivities approach theoretical limits set by the underlying signals, motivating a rapid increase in pixel count to access new science. Compelling applications, like the non-destructive assay of nuclear material for treaty verification or the search for primordial gravity waves from inflation use arrays of these detectors to increase collection area or tile a focal plane.\nWe developed three generations of SQUID multiplexers, optimizing the first for flux noise (0.17 mu Phi0 / [square root] Hz) the second for input current noise (19 pA / [square root] Hz) and the last for practical multiplexing of large arrays of cosmic microwave background polarimeters based on transition-edge sensors. Using the last design we demonstrated multiplexed readout of prototype polarimeters with the performance required for the future development of a large-scale astronomical instrument.

•Dec 1, 2011•43 citations
This research focuses on conducting an extensive computational investigation and mathematical analysis into the average voltage response of arrays of Superconducting Quantum Interference Devices (SQUIDs). These arrays will serve as the basis for the development of a sensitive, low noise, signifcantly lower Size, Weight and Power (SWaP) antenna integrated with Low-Noise Amplifier (LNA) using the SQUID technology. The goal for this antenna is to be capable of meeting all requirements for Guided Missile Destroyers (DDG) 1000 class ships for Information Operations/Signals Intelligence (IO/SIGINT) applications in Very High Frequency/Ultra High Frequency (V/UHF) bands. The device will increase the listening capability of receivers by moving technology into a new regime of energy detection allowing wider band, smaller size, more sensitive, stealthier systems. The smaller size and greater sensitivity will allow for ships to be "de-cluttered" of their current large dishes and devices, replacing everything with fewer and smaller SQUID antenna devices. The fewer devices present on the deck of a ship, the more invisible the ship will be to enemy forces. We invent new arrays of SQUIDs, optimized for signal detection with very high dynamic range and excellent spur-free dynamic range, while maintaining extreme small size (and low radar cross section), wide bandwidth, and environmentally noise limited sensitivity, effectively shifting the bottle neck of receiver systems forever away from the antenna itself deeper into the receiver chain. To accomplish these goals we develop and validate mathematical models for different designs of SQUID arrays and use them to invent a new device and systems design. This design is capable of significantly exceeding, per size weight and power, state-of-the-art receiver system measures of performance, such as bandwidth, sensitivity, dynamic range, and spurious-free dynamic range.
We have designed and tested a model for a 3 kHz receiver using a superconducting antenna circuit and a SQUID (Superconducting QUantum Interference Device) amplifier. Q factors as high as 6400 have been demonstrated for the resonant antenna, giving it an extremely low intrinsic noise voltage. We have anlayzed and solved various problems of matching between antenna and SQUID, as well as measuring noise, contributed by materials in the surrounding cryostat. We have been able to use feedback from the SQUID amplifier into the antenna to effectively broaden the 3 dB bandwidth to 1200 Hz without raising the noise level of the system significantly. By scaling the results obtained with our model receiver to an antenna volume of .022 M-cubed we have been able to estimate that a noise level of 2.4 x 10 to the -17th power T/(sq.rt. Hz) could be obtained in a 100 Hz bandwidth. (Author)
Recently, there is a growing interest in non-uniform coupled SQUID devices in the science community. Similar to how antenna array technology has moved from uniform arrays to non-uniform, sparsely populated arrays, the traditional uniform SQUID arrays evolves to an unconventional structure making these mesoscopic quantum devices (for RF reception) a feasible concept. The focus of this work covers theoretical and numerical computations which exploits well-designed coupling schemes to modeling the dynamics of the device where the behavior of the non-periodic voltage response related to the external flux exhibits an anti-peak which is present only around the zero applied magnetic field. It is know that many nonlinear dynamical systems are highly sensitive to small external perturbations, especially when they are near the onset of a bifurcation. Exploring parameter variations, such as; inductive coupling between neighboring elements, unconventional grating and fabrication parameters may lead to a significant performance enhancement. There are theoretical indications that variations in coupling could provide very high dynamic range. Application of these devices with the ability to detect and amplify will result in a new generation of electrically small antennas.
In this work we numerical model series and parallel non‐uniform superconducting quantum interference device (SQUID) array. Previous work has shown that series SQUID array constructed with a random distribution of loop sizes, (i.e. different areas for each SQUID loop) there exists a unique ‘anti‐peak’ at the zero magnetic field for the voltage versus applied magnetic field (V‐B). Similar results extend to a parallel SQUID array where the difference lies in the arrangement of the Josephson junctions. Other system parameter such as bias current, the number of loops, and mutual inductances are varied to demonstrate the change in dynamic range and linearity of the V‐B response. Application of the SQUID array as a low noise amplifier (LNA) would increase link margins and affect the entire communication system. For unmanned aerial vehicles (UAVs), size, weight and power are limited, the SQUID array would allow use of practical ‘electrically small’ antennas that provide acceptable gain.
We develop a two-dimensional (2-D) superconducting quantum interference filter (SQIF) array based on the recently introduced high-linearity tri-junction bi-SQUIDs (superconducting quantum interference device). Our bi-SQUID SQIF array design is based on a tight integration of individual bi-SQUID cells sharing inductances with adjacent cells. We provide extensive computer simulations, analysis, and experimental measurements, in which we explore the phase dynamics and linearity of the array voltage response. The nonuniformity in inductances of the bi-SQUIDs produces a pronounced zero-field single antipeak in the voltage response. The antipeak linearity and size can be optimized by varying the critical current of the additional junction of each bi-SQUID. The layout implementation of the tight 2-D array integration leads to a distinct geometrical diamond shape formed by the merged dual bi-SQUID cells. Different-sized 2-D arrays are fabricated using the standard HYPRES niobium 4.5 kA/cm2fabrication process. The measured linearity, power gain, and noise properties will be analyzed for different array sizes and the results will be compared with circuit simulations. We will discuss a design approach for the electrically small magnetic field antenna and low-noise amplifiers with high bandwidth based on these 2-D bi-SQUID SQIF arrays. The results from this work will be used to design chips densely and completely covered in bi-SQUIDs that have optimized parameters such as linearity and power gain.
We describe a low-noise, two-stage dc Superconducting QUantum Interference Device (SQUID) amplifier that is designed for applications requiring high bandwidth and dynamic range. The output signal of a low-noise SQUID in the input stage coherently modulates a series array of identical SQUIDs in the output stage via a common modulation line. The input stage is designed so its output signal does not produce multiple modulation periods in the output stage. The output stage is designed to have sufficient gain so the output noise is dominated by the amplified noise of the input SQUID and exceeds the noise of a preamplifier in the room temperature readout electronics. The SQUID amplifier may therefore be operated without flux modulation or any impedance matching network, resulting in a large dynamic range and high bandwidth.
This thesis describes a multiplexer of Superconducting Quantum Interference Devices (SQUIDs) with low-noise, ultra-low power dissipation, and great scalability. The multiplexer circuit measures the magnetic flux in a large number of unshunted rf SQUIDs by coupling each SQUID to a superconducting microwave resonator tuned to a unique resonance frequency and driving the resonators from a common feedline. A superposition of microwave tones measures each SQUID simultaneously using only two coaxial cables between the cryogenic device and room temperature. This multiplexer will enable the instrumentation of arrays with hundreds of thousands of low-temperature detectors for new applications in cosmology, materials analysis, and nuclear non-proliferation.\nThe driving application of the Microwave SQUID Multiplexer is the readout of large arrays of superconducting transition-edge sensors, by some figures of merit the most sensitive detectors of electromagnetic signals over a span of more than nine orders of magnitude in energy, from 40 GHz microwaves to 200 keV gamma rays. Modern transition-edge sensors have noise-equivalent power as low as 10-20 W / [square root] Hz and energy resolution as good as 2 eV at 6 keV. These per-pixel sensitivities approach theoretical limits set by the underlying signals, motivating a rapid increase in pixel count to access new science. Compelling applications, like the non-destructive assay of nuclear material for treaty verification or the search for primordial gravity waves from inflation use arrays of these detectors to increase collection area or tile a focal plane.\nWe developed three generations of SQUID multiplexers, optimizing the first for flux noise (0.17 mu Phi0 / [square root] Hz) the second for input current noise (19 pA / [square root] Hz) and the last for practical multiplexing of large arrays of cosmic microwave background polarimeters based on transition-edge sensors. Using the last design we demonstrated multiplexed readout of prototype polarimeters with the performance required for the future development of a large-scale astronomical instrument.