Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Wiley eBooks

QND

Hans‐A. Bachor, Timothy C. Ralph

Published Jul 5, 2019• 0 citations
Publisher

Abstract

In this chapter, the authors discuss techniques that allow non-destructive optical measurements with a quality better than possible with coherent light and conventional optics. A true quantum non-demolition (QND) experiment can be performed on one signal beam several times in a row, without introducing noise or affecting the quality of the quadrature under investigation. The characterization of a QND device can be carried out by comparing the four variances of the signal and meter beams before and after the interaction. Alternatively, one can perform correlation measurements between the fluctuations of the two beams. The standard for any comparison should always be the ideal lossless beamsplitter, a device that introduces only the absolutely minimal amount of noise. The fundamental difficulties in QND measurements are very similar to those of squeezing experiments. The authors require strong non-linear effects that couple the quadratures of the signal and meter modes, no losses or noise, and very efficient detectors.

DOI
10.1002/9783527695805.ch11

Related papers

Optical quantum non-demolition measurements

Philippe Grangier, J.-Ph. Poizat, Jean-François Roch

We discuss some theoretical and experimental aspects of quantum non-demolition (QND) measurements in the optical domain. The efficiency of a QND measurement can be characterized using three criteria, which describe respectively the quality of the quantum measurement, the non-destruction of the signal, and the conditional variance of the output signal beam, given the output meter beam (quantum-state-preparation criterion). Quantitative limits can be defined with respect to these criteria, delimiting "classical" and "quantum" domains of operation. We describe the implementation of two experiments which fulfill these criteria, using either three-level atoms inside a doubly-resonant optical cavity, or semiconductors emitters and receivers.

Physica Scripta•Jan 1, 1994•3 citations

Characterization of quantum non-demolition measurements in optics

J.-Ph. Poizat, Jean-François Roch, Philippe Grangier

We present a review of the criteria developped to characterize the efficiency of quantum non-demolition measurement devices for travelling electromagnetic waves. These criteria describe respectively the quality of the measurement, the non-destruction of the signal, and the quantum correlations between the meter read-out and the signal output. Quantitative limits can be defined with respect to these criteria, delimiting classicad and quantum domains of operation. Moreover, some questions related to the gain on the signal channel, and to repeated QND measurements, will be also discussed.

Annales de Physique•Jan 1, 1994•65 citations

Enhancement of quantum nondemolition measurements with an electro-optic feed-forward amplifier

B. C. Buchler, Ping Koy Lam, Timothy C. Ralph

Methods for the enhancement of optical quantum nondemolition (QND) measurements are discussed. We review the use of meter squeezing as a QND enhancement tool and present a method of QND enhancement using an electro-optic feed-forward amplifier. By applying a linearized theory it is shown that these techniques work very well together. The combined effect of these enhancement methods is modeled for two QND systems, a squeezed light beam splitter and an optical parametric amplifier. We also discuss the conflict between the normal QND criteria and QND systems that involve noiseless amplification. We use an additional parameter to quantify the problem. A method for correcting the effects of noiseless amplification is discussed and modeled. We also discuss a special case of QND that eliminates the optical interaction between the meter and signal input beams. This system is shown to be a very effective QND device.

Physical Review A•Dec 1, 1999•14 citations

Certified quantum non-demolition measurement of material systems

Morgan W. Mitchell, Marco Koschorreck, Marcin Kubasik +2 more

An extensive debate on quantum non-demolition (QND) measurement, reviewed in Grangier et al (1998 Nature 396 537), finds that true QND measurements must have both non-classical state-preparation capability and non-classical information-damage tradeoff. Existing figures of merit for these non-classicality criteria require direct measurement of the signal variable and are thus difficult to apply to optically-probed material systems. Here we describe a method to demonstrate both criteria without need for to direct signal measurements. Using a covariance matrix formalism and a general noise model, we compute meter observables for QND measurement triples, which suffice to compute all QND figures of merit. The result will allow certified QND measurement of atomic spin ensembles using existing techniques.

arXiv:1203.6584•New Journal of Physics•Aug 24, 2012•12 citations

Återverkansfri kvantmätning med frekvensdubbling

Linus Ekberg

Quantum non-demolition (QND) measurements allow information about a quantum state to be extracted without adding significant back-action, and is a building block for noise suppression, noiseless amplification and photonic quantum information processing. Conventional non-QND schemes based on beamsplitters are fundamentally limited by vacuum noise entering through the unused port. This thesis investigates experimentally, to our knowledge for the first time, a feedforward scheme in which second-harmonic generation (SHG) replacesthe beamsplitter, so that a copy of the field is created without coupling in additional vacuum modes. The scheme is compared to an equivalent beamsplitter (BS) feedforward setup, usingcommercially available fiber-coupled components and a continuous-wave laser at 1545 nm. The theoretical model of previous work is extended to include losses in the signal and meter arms. The model predicts that SHG outperforms the beamsplitter in both noise suppression and QND performance, and that amplitude squeezing is possible provided that the conversionefficiency exceeds roughly 40%, even with losses of up to 50% in each arm and noise 10 dB above the quantum limit. Experimentally, intensity noise of the laser was suppressed by up to 7 dB at approximately 100kHz, at a level comparable to the beamsplitter setups despite the low conversion efficiencyranging from less than 1% to 11%. The noise suppression band width is likely limited bythe time delay between the feedforward arms. The measured transfer coefficients of thebeamsplitters were close to the theoretical values, while the SHG setup gave no measurable meter signal, owing to the low conversion efficiency. High losses of 10.2 dB in the signal arm impacted the QND performance. Due to these limitations, the experiment did not manage to achieve true QND. Despite this,the high noise suppression and low conditional variance of the second harmonic shows great promise and motivates further experiments to work towards realizing the theoretical results shown in this thesis.

•Jan 1, 2026•0 citations

Towards the ideal quantum measurement

Matthew Colleti

According to the Heisenberg uncertainty principle, if we measure one variable describing a physical system, we inevitably introduce noise into some other variable describing the same system. In practice, the situation is worse than that: measuring one variable usually introduces random noise into the very quantity we are measuring. It is possible in principle to make measurements, known as quantum non-demolition (or QND) measurements, which do not have this latter effect. A QND measurement may approach the ideal quantum measurement commonly encountered in quantum mechanics textbooks. Philippe Grangier and his co-workers at the Université Paris-Sud, at Orsay in France, have recently attempted to measure the intensity of a beam of light in this way (Phys. Rev. Len. (1991) 66 1418). Their experiment has shown that it is indeed possible to make a measurement which at least partially preserves the quantum mechanical state of the detected beam.

Physics World•Jun 1, 1991•1 citation
In this chapter, the authors discuss techniques that allow non-destructive optical measurements with a quality better than possible with coherent light and conventional optics. A true quantum non-demolition (QND) experiment can be performed on one signal beam several times in a row, without introducing noise or affecting the quality of the quadrature under investigation. The characterization of a QND device can be carried out by comparing the four variances of the signal and meter beams before and after the interaction. Alternatively, one can perform correlation measurements between the fluctuations of the two beams. The standard for any comparison should always be the ideal lossless beamsplitter, a device that introduces only the absolutely minimal amount of noise. The fundamental difficulties in QND measurements are very similar to those of squeezing experiments. The authors require strong non-linear effects that couple the quadratures of the signal and meter modes, no losses or noise, and very efficient detectors.
We discuss some theoretical and experimental aspects of quantum non-demolition (QND) measurements in the optical domain. The efficiency of a QND measurement can be characterized using three criteria, which describe respectively the quality of the quantum measurement, the non-destruction of the signal, and the conditional variance of the output signal beam, given the output meter beam (quantum-state-preparation criterion). Quantitative limits can be defined with respect to these criteria, delimiting "classical" and "quantum" domains of operation. We describe the implementation of two experiments which fulfill these criteria, using either three-level atoms inside a doubly-resonant optical cavity, or semiconductors emitters and receivers.
We present a review of the criteria developped to characterize the efficiency of quantum non-demolition measurement devices for travelling electromagnetic waves. These criteria describe respectively the quality of the measurement, the non-destruction of the signal, and the quantum correlations between the meter read-out and the signal output. Quantitative limits can be defined with respect to these criteria, delimiting classicad and quantum domains of operation. Moreover, some questions related to the gain on the signal channel, and to repeated QND measurements, will be also discussed.
Methods for the enhancement of optical quantum nondemolition (QND) measurements are discussed. We review the use of meter squeezing as a QND enhancement tool and present a method of QND enhancement using an electro-optic feed-forward amplifier. By applying a linearized theory it is shown that these techniques work very well together. The combined effect of these enhancement methods is modeled for two QND systems, a squeezed light beam splitter and an optical parametric amplifier. We also discuss the conflict between the normal QND criteria and QND systems that involve noiseless amplification. We use an additional parameter to quantify the problem. A method for correcting the effects of noiseless amplification is discussed and modeled. We also discuss a special case of QND that eliminates the optical interaction between the meter and signal input beams. This system is shown to be a very effective QND device.
An extensive debate on quantum non-demolition (QND) measurement, reviewed in Grangier et al (1998 Nature 396 537), finds that true QND measurements must have both non-classical state-preparation capability and non-classical information-damage tradeoff. Existing figures of merit for these non-classicality criteria require direct measurement of the signal variable and are thus difficult to apply to optically-probed material systems. Here we describe a method to demonstrate both criteria without need for to direct signal measurements. Using a covariance matrix formalism and a general noise model, we compute meter observables for QND measurement triples, which suffice to compute all QND figures of merit. The result will allow certified QND measurement of atomic spin ensembles using existing techniques.
Quantum non-demolition (QND) measurements allow information about a quantum state to be extracted without adding significant back-action, and is a building block for noise suppression, noiseless amplification and photonic quantum information processing. Conventional non-QND schemes based on beamsplitters are fundamentally limited by vacuum noise entering through the unused port. This thesis investigates experimentally, to our knowledge for the first time, a feedforward scheme in which second-harmonic generation (SHG) replacesthe beamsplitter, so that a copy of the field is created without coupling in additional vacuum modes. The scheme is compared to an equivalent beamsplitter (BS) feedforward setup, usingcommercially available fiber-coupled components and a continuous-wave laser at 1545 nm. The theoretical model of previous work is extended to include losses in the signal and meter arms. The model predicts that SHG outperforms the beamsplitter in both noise suppression and QND performance, and that amplitude squeezing is possible provided that the conversionefficiency exceeds roughly 40%, even with losses of up to 50% in each arm and noise 10 dB above the quantum limit. Experimentally, intensity noise of the laser was suppressed by up to 7 dB at approximately 100kHz, at a level comparable to the beamsplitter setups despite the low conversion efficiencyranging from less than 1% to 11%. The noise suppression band width is likely limited bythe time delay between the feedforward arms. The measured transfer coefficients of thebeamsplitters were close to the theoretical values, while the SHG setup gave no measurable meter signal, owing to the low conversion efficiency. High losses of 10.2 dB in the signal arm impacted the QND performance. Due to these limitations, the experiment did not manage to achieve true QND. Despite this,the high noise suppression and low conditional variance of the second harmonic shows great promise and motivates further experiments to work towards realizing the theoretical results shown in this thesis.
According to the Heisenberg uncertainty principle, if we measure one variable describing a physical system, we inevitably introduce noise into some other variable describing the same system. In practice, the situation is worse than that: measuring one variable usually introduces random noise into the very quantity we are measuring. It is possible in principle to make measurements, known as quantum non-demolition (or QND) measurements, which do not have this latter effect. A QND measurement may approach the ideal quantum measurement commonly encountered in quantum mechanics textbooks. Philippe Grangier and his co-workers at the Université Paris-Sud, at Orsay in France, have recently attempted to measure the intensity of a beam of light in this way (Phys. Rev. Len. (1991) 66 1418). Their experiment has shown that it is indeed possible to make a measurement which at least partially preserves the quantum mechanical state of the detected beam.