Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Enhancement of quantum nondemolition measurements with an electro-optic feed-forward amplifier

B. C. Buchler, Ping Koy Lam, Timothy C. Ralph

Published Dec 1, 1999• 14 citations
Publisher

Abstract

Methods for the enhancement of optical quantum nondemolition (QND) measurements are discussed. We review the use of meter squeezing as a QND enhancement tool and present a method of QND enhancement using an electro-optic feed-forward amplifier. By applying a linearized theory it is shown that these techniques work very well together. The combined effect of these enhancement methods is modeled for two QND systems, a squeezed light beam splitter and an optical parametric amplifier. We also discuss the conflict between the normal QND criteria and QND systems that involve noiseless amplification. We use an additional parameter to quantify the problem. A method for correcting the effects of noiseless amplification is discussed and modeled. We also discuss a special case of QND that eliminates the optical interaction between the meter and signal input beams. This system is shown to be a very effective QND device.

DOI
10.1103/physreva.60.4943

Related papers

Quantum nondemolition measurement with a nonclassical meter input and an electro-optic enhancement

Ulrik L. Andersen, B. C. Buchler, Hans‐A. Bachor +1 more

Optical quantum nondemolition measurements are performed using a beamsplitter with a nonclassical meter input and a electro-optic feedforward loop. The nonclassical meter input is provided by a stable 4.5 dB amplitude squeezed source generated by an optical parametric amplifier. We show that the implementation of a feedforward loop gives a substantial improvement in the signal transfer efficiency. With a 92% reflective beamsplitter we measure a transfer coefficient of Ts+m = 1.81. The quantum state preparation ability of our system is evaluated using two-dimensional correlation plots. This technique allows the direct visualization of the quantum correlations between the outputs of the QND system.

Journal of Optics B Quantum and Semiclassical Optics•Apr 5, 2002•8 citations

Repeated Quantum Nondemolition Measurements of Continuous Optical Waves

Robert Bruckmeier, Hauke Hansen, Stephan Schiller

Repeated quantum nondemolition (QND) measurements for continuous optical waves were performed by combining a degenerate optical parametric amplifier and a squeezed-light beam splitter. Two-step quantum state preparation and three-beam entanglement of the individually squeezed output beams were demonstrated. The experiment is analyzed using a set of generalized criteria for nonideal individual and repeated QND measurements. The system was operated fully stabilized for up to 36 hours.

Physical Review Letters•Aug 25, 1997•27 citations

Quantum Nondemolition Measurements Improved by a Squeezed Meter Input

Robert Bruckmeier, Klaus Schneider, Stephan Schiller +1 more

Continuous quantum nondemolition (QND) measurements of the amplitude quadrature of a 1064 nm wave are performed with a monolithic dual-port degenerate optical parametric amplifier (OPA). The quality of the measurement is limited in part by the quantum fluctuations carried by the vacuum meter input wave. Improved QND measurements are realized by injecting 3.4 dB amplitude-squeezed light into the meter input port of the OPA. This achieves increased squeezing and correlation of the output signal and meter waves, and both improved operation as a quantum optical tap and as a quantum state preparator. The all-solid-state system was operated for 5 h with high stability.

Physical Review Letters•Feb 17, 1997•35 citations

Enhancing Quantum Nondemolition Measurements using Electro-Optic Feedforward

Ulrik L. Andersen, B. C. Buchler, Ping Koy Lam +2 more

Quantum Nondemolition (QND) measurements are carried out using a stable amplitude squeezed beam. The performance of the QND measurement is substantially enhanced by an electro-optic feedforward loop, which improves the signal transfer efficiency.

Optical Fiber Communication Conference•Jan 1, 2001•0 citations

QND

Hans‐A. Bachor, Timothy C. Ralph

In this chapter, the authors discuss techniques that allow non-destructive optical measurements with a quality better than possible with coherent light and conventional optics. A true quantum non-demolition (QND) experiment can be performed on one signal beam several times in a row, without introducing noise or affecting the quality of the quadrature under investigation. The characterization of a QND device can be carried out by comparing the four variances of the signal and meter beams before and after the interaction. Alternatively, one can perform correlation measurements between the fluctuations of the two beams. The standard for any comparison should always be the ideal lossless beamsplitter, a device that introduces only the absolutely minimal amount of noise. The fundamental difficulties in QND measurements are very similar to those of squeezing experiments. The authors require strong non-linear effects that couple the quadratures of the signal and meter modes, no losses or noise, and very efficient detectors.

Wiley eBooks•Jul 5, 2019•0 citations

Quantum nondemolition measurements and generation of individually squeezed twin beams by a degenerate optical parametric amplifier

Stephan Schiller, Robert Bruckmeier, Manfred Schalke +2 more

A novel scheme for continuous-wave quantum nondemolition (QND) detection of optical-amplitude quadratures is implemented using a degenerate optical parametric amplifier. A monolithic ring resonator with optimizable frustrated total internal reflection coupling is used. Signal and meter output beams are squeezed by 0.5 dB and 2.2 dB, and 38% correlated. This implies the first realization of individually squeezed twin beams, as well as quantum state preparation ability for both output beams. A quantum optical tap efficiency T s + T m = 1.08 is achieved. The all-solid-state system was completely stabilized and continuously operated as a QND device for up to 36 hours.

Europhysics Letters (EPL)•Nov 10, 1996•15 citations
Methods for the enhancement of optical quantum nondemolition (QND) measurements are discussed. We review the use of meter squeezing as a QND enhancement tool and present a method of QND enhancement using an electro-optic feed-forward amplifier. By applying a linearized theory it is shown that these techniques work very well together. The combined effect of these enhancement methods is modeled for two QND systems, a squeezed light beam splitter and an optical parametric amplifier. We also discuss the conflict between the normal QND criteria and QND systems that involve noiseless amplification. We use an additional parameter to quantify the problem. A method for correcting the effects of noiseless amplification is discussed and modeled. We also discuss a special case of QND that eliminates the optical interaction between the meter and signal input beams. This system is shown to be a very effective QND device.
Optical quantum nondemolition measurements are performed using a beamsplitter with a nonclassical meter input and a electro-optic feedforward loop. The nonclassical meter input is provided by a stable 4.5 dB amplitude squeezed source generated by an optical parametric amplifier. We show that the implementation of a feedforward loop gives a substantial improvement in the signal transfer efficiency. With a 92% reflective beamsplitter we measure a transfer coefficient of Ts+m = 1.81. The quantum state preparation ability of our system is evaluated using two-dimensional correlation plots. This technique allows the direct visualization of the quantum correlations between the outputs of the QND system.
Continuous quantum nondemolition (QND) measurements of the amplitude quadrature of a 1064 nm wave are performed with a monolithic dual-port degenerate optical parametric amplifier (OPA). The quality of the measurement is limited in part by the quantum fluctuations carried by the vacuum meter input wave. Improved QND measurements are realized by injecting 3.4 dB amplitude-squeezed light into the meter input port of the OPA. This achieves increased squeezing and correlation of the output signal and meter waves, and both improved operation as a quantum optical tap and as a quantum state preparator. The all-solid-state system was operated for 5 h with high stability.
In this chapter, the authors discuss techniques that allow non-destructive optical measurements with a quality better than possible with coherent light and conventional optics. A true quantum non-demolition (QND) experiment can be performed on one signal beam several times in a row, without introducing noise or affecting the quality of the quadrature under investigation. The characterization of a QND device can be carried out by comparing the four variances of the signal and meter beams before and after the interaction. Alternatively, one can perform correlation measurements between the fluctuations of the two beams. The standard for any comparison should always be the ideal lossless beamsplitter, a device that introduces only the absolutely minimal amount of noise. The fundamental difficulties in QND measurements are very similar to those of squeezing experiments. The authors require strong non-linear effects that couple the quadratures of the signal and meter modes, no losses or noise, and very efficient detectors.
A novel scheme for continuous-wave quantum nondemolition (QND) detection of optical-amplitude quadratures is implemented using a degenerate optical parametric amplifier. A monolithic ring resonator with optimizable frustrated total internal reflection coupling is used. Signal and meter output beams are squeezed by 0.5 dB and 2.2 dB, and 38% correlated. This implies the first realization of individually squeezed twin beams, as well as quantum state preparation ability for both output beams. A quantum optical tap efficiency T s + T m = 1.08 is achieved. The all-solid-state system was completely stabilized and continuously operated as a QND device for up to 36 hours.