Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Optics and Photon Counting

Mid-infrared photon counting with superconducting nanowires

Gregor G. Taylor, D. Morozov, Robert H. Hadfield

Published Apr 14, 2021• 1 citation
Publisher

Abstract

Single-photon counting has become an essential tool in quantum optics experiments, as well as remote sensing and life science applications. However conventional technologies such as single-photon avalanche diodes, as well as the availability of standard telecom optical components, has limited much of this work to the near infrared/telecom wavelength range. Superconducting nanowire single photon detectors (SNSPDs) have emerged in recent years as the gold standard in photon counting applications due to their low dark count rates, fast timing resolution and high efficiency [1]. SNSPDs have also demonstrated photon counting efficiency out to much greater wavelengths which enables us to explore new experimental possibilities in the mid-infrared [2]. In this work we design and fabricate mid-infrared SNSPDs and deploy them in a variety of photon counting experiments [3,4]. The devices are based on a NbTiN superconducting film integrated into an optical cavity to enhance absorption in the mid-infrared. We characterise these devices using an optical parametric oscillator, tuneable between 1.5 m and 4.2 m. We then deploy these in a proof-of-principle tabletop light detection and ranging (LIDAR) experiment at 2.3 m. LIDAR in the mid-infrared is attractive due to spectral regions of low atmospheric absorption and reduced solar background photon flux, when compared to telecom wavelengths. We also present results from a photon-pair source operating at 2 m. This is a key resource for extending quantum optics and quantum secure communications to the mid infrared domain. Pairs are generated using a custom lithium niobate crystal and detected using SNSPDs. We demonstrate two-photon interference and polarisation entanglement of the photon pairs at 2 m. This work opens the pathway to future development of quantum optics and quantum technologies in the mid-infrared spectral region. References [1] Gol’tsman et al Applied Physics Letters 79 705 (2001) [2] Marisli et al Nano Letters 12 (9) 4799 (2012) [3] G. G. Taylor et al Optics Express 26 (27) 38147 (2018) [4] S. Prabhakar et al Science Advances 6 (13) eaay5195 (2019)

DOI
10.1117/12.2594494

Related papers

Mid-infrared photon counting with superconducting nanowires

D. Morozov, Gregor G. Taylor, Kleanthis Erotokritou +3 more

Superconducting Nanowire Single photon Detectors (SNSPDs) offer unparalleled performance for IR photon counting, combining close to unity quantum efficiency, low intrinsic noise and ultrafast timing jitter. The ability of SNSPDs to count photons in mid-IR band up to 7 um wavelength opens up new possibilities in quantum optics, laser ranging, free space Quantum Key Distribution (QKD) and astronomy. Here we report on development of mid-IR SNSPDs including device design, fabrication, optimisation of superconducting materials and characterisation. We present a characterisation setup covering 1.5 - 4.2 um spectral region based on tuneable optical parametric oscillator with picosecond long pulses. We then demonstrate the viability of mid infrared SNSPDs for a variety of applications and report the results from single photon light detection and ranging (LIDAR) experiment with 2.3 um photons. This work paves the way for future app in free space QKD, deep space communication and astronomy.

Quantum Nanophotonic Materials, Devices, and Systems•Jul 30, 2021•1 citation

Superconducting nanowire materials for mid infrared single photon detection (Conference Presentation)

D. Morozov, Archan Banerjee, Kleanthis Erotokritou +5 more

Superconducting nanowire single photon detectors (SNSPD) offer excellent performance for infrared single photon detection, combining high efficiency, low timing jitter, low dark count rates and high photon counting rates. Promising application areas for SNSPDs include quantum key distribution, space-to-ground communications and single photon remote sensing [1]. SNSPDs are typically made with ultrathin niobium nitride (NbN) films with thickness 4 nm and a superconducting transition temperature above 9 K. NbN offers high performance in the near infrared but their sensitivity drops at wavelengths beyond 2 um. There is growing interest in potential photon counting applications in the mid infrared domain (for example remote sensing of greenhouse gases in the atmosphere [2]). One way to overcome the wavelength limit in NbN SNSPDs is to use films with a lower superconducting energy gap [3]. Here we report on the study of SNSPDs fabricated with thin films of titanium nitride (TiN). We compare TiN films deposited by atomic layer deposition (ALD) and by magnetron sputtering. The TiN films range in thickness from 5 to 60 nm, with superconducting transition temperatures from ~1 K to 3.5 K. We have analyzed the films via transmission electron microscopy and variable angle spectroscopic ellipsometry. We characterize TiN SNSPDs performance from near to mid-infrared at wavelengths (1-4 um) with fast optical parametric oscillator (OPO) source. We compare the performance of TiN SNSPDs to devices based on other lower gap materials: MoSi, NbTiN, WSi. [1] Natarajan et al Superconductor Science and Technology 25 063001 (2012) [2] Abshire et al Laser Applications to Chemical, Security and Environmental Analysis, (Optical Society of America, 2008) paper LMA4 [3] Verma et al Applied Physics Letters 105 022602 (2014)

Advanced Photon Counting Techniques•May 14, 2018•3 citations

Mid-infrared superconducting nanowire single-photon detectors: Potential, progress, and challenges

Gregor G. Taylor, Robert H. Hadfield

The ability to detect single photons in the mid-infrared spectral range (beyond 2 μm wavelength, photon energy below 0.62 eV) is the key to unlocking a range of emerging scientific applications, from remote sensing LIDAR, molecular spectroscopy, and powerful new approaches to dark matter detection. Conventional detector types, such as semiconductor single-photon avalanche diodes, lose sensitivity at such low photon energy. Superconducting materials, with a much lower characteristic energy gap, hold particular promise. In this Perspective, we focus on recent advances in superconducting nanowire single-photon detectors, which have recently extended single-photon sensitivity up to 29 μm (0.043 eV). We discuss the potential for future advances and strategies to overcome challenges to technological development.

Applied Physics Letters•Jan 5, 2026•15 citations

Mid-infrared Nb4N3-based superconducting nanowire single photon detectors for wavelengths up to 10 µm

Yiming Pan, Hui Zhou, Xingyu Zhang +6 more

Mid-infrared (MIR) single-photon detection is emerging as an important technology for various applications. Superconducting nanowire single photon detectors (SNSPDs) fabricated with superconducting films with energy gaps of a few meV are natural broadband single-photon detectors. Recently, extending SNSPDs’ operation wavelengths into the MIR region is highly attractive. γ-Nb4N3 has a reduced N content and lower energy gap than the commonly used δ-NbN, making SNSPDs based on γ-Nb4N3 film more sensitive to low energy photons. We report on a Nb4N3-SNSPD based on 62-nm wide nanowire, with an optical absorption enhancement design and an optimized device package for efficient ZBLAN fiber coupling and dark count filtering. The developed device has a unity intrinsic detection efficiency (IDE) in the 1.5–4 µm wavelength region, and the device detection efficiency at 2.95 µm was measured to be 32.5%, with an uncertainty of 12.7%. Furthermore, we reduced the device geometry, and measured 3–10 µm photon response of a device based on 5-nm film and 42-nm nanowire, with an IDE of 95%, 81%, 40%, and 6% for 4.8, 6, 8, and 10 µm, respectively.

Optics Express•Oct 7, 2022•41 citations

Mid-infrared characterization of NbTiN superconducting nanowire single-photon detectors on silicon-on-insulator

Adan Azem, D. Morozov, Daniel Kuznesof +4 more

Superconducting nanowire single-photon detectors are widely used for detecting individual photons across various wavelengths from ultraviolet to near-infrared range. Recently, there has been increasing interest in enhancing their sensitivity to single photons in the mid-infrared spectrum, driven by applications in quantum communication, spectroscopy, and astrophysics. Here, we present our efforts to expand the spectral detection capabilities of U-shaped NbTiN-based superconducting nanowire single-photon detectors, fabricated in a 2-wire configuration on a silicon-on-insulator substrate, into the mid-infrared range. We demonstrate saturated internal detection efficiency extending up to a wavelength of 3.5 μm for a 5 nm thick and 50 nm wide NbTiN nanowire with a dark count rate less than 10 counts per second at 0.9 K and a rapid recovery time of 4.3 ns. The detectors are engineered for integration on waveguides in a silicon-on-insulator platform for compact, multi-channel device applications.

arXiv:2408.15959•Applied Physics Letters•Nov 18, 2024•15 citations

Efficient mid-infrared single-photon detection using superconducting NbTiN nanowires with high time resolution in a Gifford-McMahon cryocooler

Jin Chang, Johannes W. N. Los, Ronan Gourgues +6 more

Shortly after their inception, superconducting nanowire single-photon detectors (SNSPDs) became the leading quantum light detection technology. With the capability of detecting single-photons with near-unity efficiency, high time resolution, low dark count rate, and fast recovery time, SNSPDs outperform conventional single-photon detection techniques. However, detecting lower energy single photons ( < 0.8 eV ) with high efficiency and low timing jitter has remained a challenge. To achieve unity internal efficiency at mid-infrared wavelengths, previous works used amorphous superconducting materials with low energy gaps at the expense of reduced time resolution (close to a nanosecond), and by operating them in complex milliKelvin (mK) dilution refrigerators. In this work, we provide an alternative approach with SNSPDs fabricated from 5 to 9.5 nm thick NbTiN superconducting films and devices operated in conventional Gifford-McMahon cryocoolers. By optimizing the superconducting film deposition process, film thickness, and nanowire design, our fiber-coupled devices achieved > 70 % system detection efficiency (SDE) at 2 μm and sub-15 ps timing jitter. Furthermore, detectors from the same batch demonstrated unity internal detection efficiency at 3 μm and 80% internal efficiency at 4 μm, paving the road for an efficient mid-infrared single-photon detection technology with unparalleled time resolution and without mK cooling requirements. We also systematically studied the dark count rates (DCRs) of our detectors coupled to different types of mid-infrared optical fibers and blackbody radiation filters. This offers insight into the trade-off between bandwidth and DCRs for mid-infrared SNSPDs. To conclude, this paper significantly extends the working wavelength range for SNSPDs made from polycrystalline NbTiN to 1.5–4 μm, and we expect quantum optics experiments and applications in the mid-infrared range to benefit from this far-reaching technology.

arXiv:2107.06354•Photonics Research•Jan 25, 2022•57 citations
Single-photon counting has become an essential tool in quantum optics experiments, as well as remote sensing and life science applications. However conventional technologies such as single-photon avalanche diodes, as well as the availability of standard telecom optical components, has limited much of this work to the near infrared/telecom wavelength range. Superconducting nanowire single photon detectors (SNSPDs) have emerged in recent years as the gold standard in photon counting applications due to their low dark count rates, fast timing resolution and high efficiency [1]. SNSPDs have also demonstrated photon counting efficiency out to much greater wavelengths which enables us to explore new experimental possibilities in the mid-infrared [2]. In this work we design and fabricate mid-infrared SNSPDs and deploy them in a variety of photon counting experiments [3,4]. The devices are based on a NbTiN superconducting film integrated into an optical cavity to enhance absorption in the mid-infrared. We characterise these devices using an optical parametric oscillator, tuneable between 1.5 m and 4.2 m. We then deploy these in a proof-of-principle tabletop light detection and ranging (LIDAR) experiment at 2.3 m. LIDAR in the mid-infrared is attractive due to spectral regions of low atmospheric absorption and reduced solar background photon flux, when compared to telecom wavelengths. We also present results from a photon-pair source operating at 2 m. This is a key resource for extending quantum optics and quantum secure communications to the mid infrared domain. Pairs are generated using a custom lithium niobate crystal and detected using SNSPDs. We demonstrate two-photon interference and polarisation entanglement of the photon pairs at 2 m. This work opens the pathway to future development of quantum optics and quantum technologies in the mid-infrared spectral region. References [1] Gol’tsman et al Applied Physics Letters 79 705 (2001) [2] Marisli et al Nano Letters 12 (9) 4799 (2012) [3] G. G. Taylor et al Optics Express 26 (27) 38147 (2018) [4] S. Prabhakar et al Science Advances 6 (13) eaay5195 (2019)
Superconducting Nanowire Single photon Detectors (SNSPDs) offer unparalleled performance for IR photon counting, combining close to unity quantum efficiency, low intrinsic noise and ultrafast timing jitter. The ability of SNSPDs to count photons in mid-IR band up to 7 um wavelength opens up new possibilities in quantum optics, laser ranging, free space Quantum Key Distribution (QKD) and astronomy. Here we report on development of mid-IR SNSPDs including device design, fabrication, optimisation of superconducting materials and characterisation. We present a characterisation setup covering 1.5 - 4.2 um spectral region based on tuneable optical parametric oscillator with picosecond long pulses. We then demonstrate the viability of mid infrared SNSPDs for a variety of applications and report the results from single photon light detection and ranging (LIDAR) experiment with 2.3 um photons. This work paves the way for future app in free space QKD, deep space communication and astronomy.
Superconducting nanowire single photon detectors (SNSPD) offer excellent performance for infrared single photon detection, combining high efficiency, low timing jitter, low dark count rates and high photon counting rates. Promising application areas for SNSPDs include quantum key distribution, space-to-ground communications and single photon remote sensing [1]. SNSPDs are typically made with ultrathin niobium nitride (NbN) films with thickness 4 nm and a superconducting transition temperature above 9 K. NbN offers high performance in the near infrared but their sensitivity drops at wavelengths beyond 2 um. There is growing interest in potential photon counting applications in the mid infrared domain (for example remote sensing of greenhouse gases in the atmosphere [2]). One way to overcome the wavelength limit in NbN SNSPDs is to use films with a lower superconducting energy gap [3]. Here we report on the study of SNSPDs fabricated with thin films of titanium nitride (TiN). We compare TiN films deposited by atomic layer deposition (ALD) and by magnetron sputtering. The TiN films range in thickness from 5 to 60 nm, with superconducting transition temperatures from ~1 K to 3.5 K. We have analyzed the films via transmission electron microscopy and variable angle spectroscopic ellipsometry. We characterize TiN SNSPDs performance from near to mid-infrared at wavelengths (1-4 um) with fast optical parametric oscillator (OPO) source. We compare the performance of TiN SNSPDs to devices based on other lower gap materials: MoSi, NbTiN, WSi. [1] Natarajan et al Superconductor Science and Technology 25 063001 (2012) [2] Abshire et al Laser Applications to Chemical, Security and Environmental Analysis, (Optical Society of America, 2008) paper LMA4 [3] Verma et al Applied Physics Letters 105 022602 (2014)
The ability to detect single photons in the mid-infrared spectral range (beyond 2 μm wavelength, photon energy below 0.62 eV) is the key to unlocking a range of emerging scientific applications, from remote sensing LIDAR, molecular spectroscopy, and powerful new approaches to dark matter detection. Conventional detector types, such as semiconductor single-photon avalanche diodes, lose sensitivity at such low photon energy. Superconducting materials, with a much lower characteristic energy gap, hold particular promise. In this Perspective, we focus on recent advances in superconducting nanowire single-photon detectors, which have recently extended single-photon sensitivity up to 29 μm (0.043 eV). We discuss the potential for future advances and strategies to overcome challenges to technological development.
Mid-infrared (MIR) single-photon detection is emerging as an important technology for various applications. Superconducting nanowire single photon detectors (SNSPDs) fabricated with superconducting films with energy gaps of a few meV are natural broadband single-photon detectors. Recently, extending SNSPDs’ operation wavelengths into the MIR region is highly attractive. γ-Nb4N3 has a reduced N content and lower energy gap than the commonly used δ-NbN, making SNSPDs based on γ-Nb4N3 film more sensitive to low energy photons. We report on a Nb4N3-SNSPD based on 62-nm wide nanowire, with an optical absorption enhancement design and an optimized device package for efficient ZBLAN fiber coupling and dark count filtering. The developed device has a unity intrinsic detection efficiency (IDE) in the 1.5–4 µm wavelength region, and the device detection efficiency at 2.95 µm was measured to be 32.5%, with an uncertainty of 12.7%. Furthermore, we reduced the device geometry, and measured 3–10 µm photon response of a device based on 5-nm film and 42-nm nanowire, with an IDE of 95%, 81%, 40%, and 6% for 4.8, 6, 8, and 10 µm, respectively.
Superconducting nanowire single-photon detectors are widely used for detecting individual photons across various wavelengths from ultraviolet to near-infrared range. Recently, there has been increasing interest in enhancing their sensitivity to single photons in the mid-infrared spectrum, driven by applications in quantum communication, spectroscopy, and astrophysics. Here, we present our efforts to expand the spectral detection capabilities of U-shaped NbTiN-based superconducting nanowire single-photon detectors, fabricated in a 2-wire configuration on a silicon-on-insulator substrate, into the mid-infrared range. We demonstrate saturated internal detection efficiency extending up to a wavelength of 3.5 μm for a 5 nm thick and 50 nm wide NbTiN nanowire with a dark count rate less than 10 counts per second at 0.9 K and a rapid recovery time of 4.3 ns. The detectors are engineered for integration on waveguides in a silicon-on-insulator platform for compact, multi-channel device applications.
Shortly after their inception, superconducting nanowire single-photon detectors (SNSPDs) became the leading quantum light detection technology. With the capability of detecting single-photons with near-unity efficiency, high time resolution, low dark count rate, and fast recovery time, SNSPDs outperform conventional single-photon detection techniques. However, detecting lower energy single photons ( < 0.8 eV ) with high efficiency and low timing jitter has remained a challenge. To achieve unity internal efficiency at mid-infrared wavelengths, previous works used amorphous superconducting materials with low energy gaps at the expense of reduced time resolution (close to a nanosecond), and by operating them in complex milliKelvin (mK) dilution refrigerators. In this work, we provide an alternative approach with SNSPDs fabricated from 5 to 9.5 nm thick NbTiN superconducting films and devices operated in conventional Gifford-McMahon cryocoolers. By optimizing the superconducting film deposition process, film thickness, and nanowire design, our fiber-coupled devices achieved > 70 % system detection efficiency (SDE) at 2 μm and sub-15 ps timing jitter. Furthermore, detectors from the same batch demonstrated unity internal detection efficiency at 3 μm and 80% internal efficiency at 4 μm, paving the road for an efficient mid-infrared single-photon detection technology with unparalleled time resolution and without mK cooling requirements. We also systematically studied the dark count rates (DCRs) of our detectors coupled to different types of mid-infrared optical fibers and blackbody radiation filters. This offers insight into the trade-off between bandwidth and DCRs for mid-infrared SNSPDs. To conclude, this paper significantly extends the working wavelength range for SNSPDs made from polycrystalline NbTiN to 1.5–4 μm, and we expect quantum optics experiments and applications in the mid-infrared range to benefit from this far-reaching technology.