In this paper, we present a full quantum description for coupling mechanism of the metamaterial. We start the derivation from quantum master equation to fit the spectrum of THz metamaterial. Therefore we can employ the quantum master equation to describe the coupling of metamaterial, such as the electromagnetically induced transparency (EIT) and bound state in the continuum (BIC). In this paper, we build up a bridge between the quantum mechanism and coupling mechanism of metamaterial, so-called quantum–classical analogies. Based on our theory, we can find the more quantum phenomenon with corresponding to the coupling phenomenon of the metamaterial.
In this paper, we present a full quantum description for coupling mechanism of the metamaterial. We start the derivation from quantum master equation to fit the spectrum of THz metamaterial. Therefore we can employ the quantum master equation to describe the coupling of metamaterial, such as the electromagnetically induced transparency (EIT) and bound state in the continuum (BIC). In this paper, we build up a bridge between the quantum mechanism and coupling mechanism of metamaterial, so-called quantum–classical analogies. Based on our theory, we can find the more quantum phenomenon with corresponding to the coupling phenomenon of the metamaterial.
\n With a metamaterial structure, the phenomenology observed in quantum electromagnetically induced transparency is reproduced. Through the parametric comparison between quantum and classical systems, the physical mechanism of this novel phenomenon has been explained directly in our analysis. In addition, we use another metamaterial structure to mimic a tripod four-level atom and reveal the analog of electromagnetically induced absorption. Our theoretical and experimental studies may not only bring an intuitive understanding of quantum interference in atomic system, but also provide useful guidelines for the design of microwave devices based on metamaterials.\n
We theoretically investigate the classical analog of electromagnetically induced transparency (EIT) and electromagnetically induced absorption (EIA) in a planar metamaterial at optical frequency, which originates from destructive and constructive interference between dark and radiative elements.The metamaterial consists of two coupled resonators with different geometries.An EIT-like transparent window with low absorption is observed and found to be strongly affected by resonant states of the resonators.The transition between the EIT and EIA is achieved by changing the split width and coupling distance.The absorption is enhanced up to 2.5 times compared with the dipolar case.The excitation of the dark mode is very important for EIT-and EIA-like responses of the proposed metamaterial.The EIT and EIA phenomena offer a potential method for manipulating electromagnetic response in metamaterial-based devices.
We show that by treating the weak probe field as a perturbation to the strong coupling fields in the atomic system and using the perturbative method in a master equation, the features of linear response of phenomena of electromagnetically induced transparency (EIT) can be uniformly demonstrated, regardless of the details of atomic energy level configuration. We compare our estimation with both typical and atypical EIT-observed configurations and find that our model indeed provides a description of the sharp transmission window in central area of typical EIT curve. It can also be inferred hereby that for various systems other than atomic gas, as long as the description of the system’s dynamics comes down to the simplified form of master equation, the corresponding EIT analogs and EIT-like phenomena can also be explained in this way.
We show that by treating the weak probe field as a perturbation to the strong coupling fields in the atomic system and using the perturbative method in a master equation, the features of linear response of phenomena of electromagnetically induced transparency (EIT) can be uniformly demonstrated, regardless of the details of atomic energy level configuration. We compare our estimation with both typical and atypical EIT-observed configurations and find that our model indeed provides a description of the sharp transmission window in central area of typical EIT curve. It can also be inferred hereby that for various systems other than atomic gas, as long as the description of the system’s dynamics comes down to the simplified form of master equation, the corresponding EIT analogs and EIT-like phenomena can also be explained in this way.
Abstract Electromagnetically induced transparency (EIT) stems from a quantum system, where an opaque atomic medium appears the narrow transparent state within a wide absorption area. This phenomenon can be achieved by quantum interference of pumping light and detecting light at different energy levels of transitions. In the generation process of EIT effect, in addition to transparent state, the atomic medium is usually accompanied with a strong dispersion effect, which will bright about a significant reduction of light velocity, thus realizing many important applications, such as slow light propagations. Although the EIT effect has many important applications, its application scenarios are greatly limited due to the fact that EIT realization usually requires specific and complicated conditions, such as refrigeration temperature, high intensity laser, etc. Recently, the analogue of EIT effect in metamaterial has attracted increasing attentions due to its advantages such as controllable room temperature and large operating bandwidth. Metamaterial analogue of EIT effect has become a new research focus. In this article, we review current research progresses on EIT metamaterials. Firstly, we describe the theoretical models for analyzing EIT metamaterials, including the mechanical oscillator model and the equivalent circuit model. Then, we describe the simulations, designs and experiments of passive EIT metamaterials with fixed structures and active EIT metamaterials with tunable elements. Furthermore, the applications of EIT metamaterials in the areas of slow lights, sensings, absorptions and other fields are also reviewed. Finally, the possible directions and key issues of future EIT metamaterial researches are prospected.
Recently, metamaterials with unique electromagnetic (EM) properties have attracted people’s great interest. In metamaterials, the eclectic and magnetic response to incident light can be conveniently tuned. For example, the enhancement of electric and magnetic response can bring about effective negative permittivity (epsilon) and negative permeability (mu), respectively [1,2]. Since the interactions of metamaterials and light can be manipulated by varying the structural and geometric parameters of metamaterials, metamaterials provide us a convenient platform to mimic a variety of quantum-optic phenomena such as electromagnetically induced transparency (EIT) [3] and vacuum Rabi splitting [4]. EIT in quantum optics occurs when atoms can transit via two pathways and make a destructive interference to inhibit absorption, which brings about slow-wave effect and strong group velocity dispersion [5]. However, the building process of atomic EIT is still unclear due to the very quick time evolution in the transition. EIT analog in metamaterials realized by the interference in two classical pathways can observe the dynamic process during the establishment of EIT in the time scale much larger than the atomic counterpart. Based on a waveguide structure, we study the dynamic evolution of EIT in metamaterials and reveal experimentally the parameters controlling excitation transfer during the building process of EIT [6]. The dynamic properties of classical EIT not only mimic the population transfer between energy levels in the atomic EIT, but also present a physical picture of rapid optical response that plays an important role in fast manipulating light by EIT. Moreover, we study another important problem in classical EIT, i.e., the influence of intrinsic losses on EIT. We provide systematic experimental demonstration of EIT in metamaterials with tunable intrinsic loss. It is found under the EIT condition the maximum transmittance as well as the corresponding group delay in the transmission window is nearly unchanged and only the delay bandwidth is affected by the intrinsic loss. Vacuum Rabi splitting, which appears when atoms or atom-like systems are put inside a cavity, is another important quantum phenomenon that may be applied for the quantum entanglement and computations [7]. In a cavity with high quality factor and small volume, vacuum Rabi splitting can occur for a single atom in the strong coupling regime. In general, the cavity modes are all in the form of standing waves and the cavity fields are inhomogeneous. To ensure strong coupling of an atom (or a quantum dot) and photons, we need to place the atom right at the peak(s) of the fields, which is very challenging in atomic or solid-state experiments. Moreover, in atomic experiments, a cold atom is needed. This is because a hot atom can move around the position-variant fields under thermal fluctuation, making the coupling of the atom and the cavity unstable. To overcome the position uncertainty, we propose another type of cavity filled with zero-index metamaterials (ZIMs) in which epsilon=0 and/or mu=0 . In an impedance-matched ZIM ( epsilon=mu=0), both phases and amplitudes of the EM fields are homogeneous [8]. However, in a epsilon-near-zero (ENZ) medium (epsilon=0,mu=1), although the phases of EM waves are uniform, in most cases the amplitudes of electric fields will vary in space. In practice, a highly doped semiconductor such as InGaAs can be utilized as an ENZ medium [9] and self-assembled or colloidal quantum dots could be embedded in this ENZ medium. So how to realize uniform electric fields in an ENZ medium is an important practical problem. We discover that, when an ENZ medium is inserted in the center of a two-dimensional photonic crystal with a gap that plays a role of magnetic wall, the electric fields in the ENZ medium are forced to be nearly uniform, as required by Maxwell equations and boundary conditions. Then, we embed a quantum dot in the ENZ medium confined by the magnetic-wall-like photonic barrier and obtain a nearly position-independent Rabi-like splitting. This is because the enhanced electric fields are almost same at any place of the ENZ medium. Finally, by loading lumped capacitors and inductors in a microwave transmission line, we realize a cavity with effective ZIM in which the enhanced fields are nearly homogeneous [10]. When an atom-like split ring resonator is coupled to this effective ZIM at various locations, we observe the nearly position-independent Rabi-like splitting. A ZIM-filled cavity in the strong coupling regime will provide us a new platform to study the interactions of atoms and photons in the future.