Abstract Electromagnetically induced transparency (EIT) stems from a quantum system, where an opaque atomic medium appears the narrow transparent state within a wide absorption area. This phenomenon can be achieved by quantum interference of pumping light and detecting light at different energy levels of transitions. In the generation process of EIT effect, in addition to transparent state, the atomic medium is usually accompanied with a strong dispersion effect, which will bright about a significant reduction of light velocity, thus realizing many important applications, such as slow light propagations. Although the EIT effect has many important applications, its application scenarios are greatly limited due to the fact that EIT realization usually requires specific and complicated conditions, such as refrigeration temperature, high intensity laser, etc. Recently, the analogue of EIT effect in metamaterial has attracted increasing attentions due to its advantages such as controllable room temperature and large operating bandwidth. Metamaterial analogue of EIT effect has become a new research focus. In this article, we review current research progresses on EIT metamaterials. Firstly, we describe the theoretical models for analyzing EIT metamaterials, including the mechanical oscillator model and the equivalent circuit model. Then, we describe the simulations, designs and experiments of passive EIT metamaterials with fixed structures and active EIT metamaterials with tunable elements. Furthermore, the applications of EIT metamaterials in the areas of slow lights, sensings, absorptions and other fields are also reviewed. Finally, the possible directions and key issues of future EIT metamaterial researches are prospected.
Abstract Electromagnetically induced transparency (EIT) stems from a quantum system, where an opaque atomic medium appears the narrow transparent state within a wide absorption area. This phenomenon can be achieved by quantum interference of pumping light and detecting light at different energy levels of transitions. In the generation process of EIT effect, in addition to transparent state, the atomic medium is usually accompanied with a strong dispersion effect, which will bright about a significant reduction of light velocity, thus realizing many important applications, such as slow light propagations. Although the EIT effect has many important applications, its application scenarios are greatly limited due to the fact that EIT realization usually requires specific and complicated conditions, such as refrigeration temperature, high intensity laser, etc. Recently, the analogue of EIT effect in metamaterial has attracted increasing attentions due to its advantages such as controllable room temperature and large operating bandwidth. Metamaterial analogue of EIT effect has become a new research focus. In this article, we review current research progresses on EIT metamaterials. Firstly, we describe the theoretical models for analyzing EIT metamaterials, including the mechanical oscillator model and the equivalent circuit model. Then, we describe the simulations, designs and experiments of passive EIT metamaterials with fixed structures and active EIT metamaterials with tunable elements. Furthermore, the applications of EIT metamaterials in the areas of slow lights, sensings, absorptions and other fields are also reviewed. Finally, the possible directions and key issues of future EIT metamaterial researches are prospected.
The electromagnetically induced transparency (EIT), which is a result of destructive interference between different excitation paths in a three-energy-level atomic medium, makes opaque probe light transparent over a range of frequencies. As this EIT effect is usually accompanied with strong dispersion, it has potential applications such as slow light propagation, optical buffering, nonlinear optics, optical sensing, etc. However, for conventional quantum EIT effect which requires stable gas lasers and low temperature environment, the implementation of EIT in chip-scale applications is severely hampered by the scathing experimental requirements. Recently, the EIT-like effect in metamaterials, which are constructed by designing the artificial subwavelength functional elements and arranging the spatial sequences, attracts tremendous attention because of its advantages, such as room temperature manipulability, large bandwidth, and small sizes. In addition, the high-quality factor(Q) value obtained by EIT-like effect has great significance in designing the metamaterial-based devices. In this paper, we design an EIT-like metamaterial with such a structure. The unit cell of the proposed metamaterial is constructed by two asymmetric silicon blocks embedded on a silicon dioxide substrate. Meanwhile, we analyze its optical properties and EIT-like effects by using three-dimension (3D) FDTD method. Based on the coupled Lorentz model, the EIT-like effect of the designed metamaterial is investigated. Then, by employing the electric field distribution on the surface of the metamaterial, and combining with the three-level atomic system, the mechanism of the EIT-like effect is analyzed in detail. We find that the EIT-like effect in the proposed metamaterial has high Q value (Q ≈ 8616) and the high transmission (T = 96%). By changing the length of the silicon block to destroy the asymmetry of the metamaterial structure, an active tuning EIT-like effect is realized. Furthermore, the metamaterial structure has the advantages of low loss, easy preparation, and active-controllability. This study represents an innovative approach to designing the EIT-like metamaterial, which is expected to be useful for designing active tunable slow-light devices and highly sensitive optical sensors.
Abstract Metamaterials are a class of non-natural materials with special properties, the microstructure of which does not exist in nature. By artificially designing the structure of such materials, they can acquire electromagnetic properties that conventional materials in nature do not have. Electromagnetically induced transparency refers to the process of quantum interference effect between atomic energy levels in microscopic systems, which makes an energy-transmitting window appear in the original energy-absorbing region, simply put, a medium strongly absorbs a certain frequency of the light beam, and when another light beam is applied, the absorption of the first light beam by the medium will be greatly reduced or no longer absorbed. This phenomenon is called electromagnetically induced transparency, or EIT for short. In this paper, we combine the graphene material with the EIT structure to improve the manipulability of the EIT structure and obtain a controllable EIT structure based on the multi-mode coupled EIT extension.
The vigorous research on low-loss photonic devices has brought significance to a new kind of electromagnetic excitation, known as toroidal resonances. Toroidal excitation, possessing high-quality factor and narrow linewidth of the resonances, has found profound applications in metamaterial (MM) devices. By the coupling of toroidal dipolar resonance to traditional electric/magnetic resonances, a metamaterial analogue of electromagnetically induced transparency effect (EIT) has been developed. Toroidal induced EIT has demonstrated intriguing properties including steep linear dispersion in transparency windows, often leading to elevated group refractive index in the material. This review summarizes the brief history and properties of the toroidal resonance, its identification in metamaterials, and their applications. Further, numerous theoretical and experimental demonstrations of single and multiband EIT effects in toroidal-dipole-based metamaterials and its applications are discussed. The study of toroidal-based EIT has numerous potential applications in the development of biomolecular sensing, slow light systems, switches, and refractive index sensing.
This study demonstrates a metamaterial with two coupled split-ring resonators (SRR) can exhibit an effect reminiscent of electromagnetically induced transparency (EIT), a coherent process normally observed in three-level atomic media. The coupling between two SRR induces a frequency splitting in the spectral response of the metamaterial, opening up a narrow transmission band in the centre of the absorption line. The obtained reduction in group velocity together with the low absorption is useful for a variety of slow-light applications, without the need for the extreme cooling or the large magnetic fields that are typically required for EIT in atomic systems.
Metamaterials, or artificial materials with optical properties not known for natural materials, have recently been used to demonstrate unusual optical phenomena, such as negative refraction, perfect lenses, subwavelength components, and electromagnetic invisibility cloaks. Most of the metamaterials designed to date are periodic structures containing a single resonating element in each unit cell, such as a split-ring resonator (SRR), a cutwire, or a slab-wire pair [1]. In this contribution, we demonstrate that a metamaterial with two coupled SRRs can exhibit an effect reminiscent of electromagnetically induced transparency (EIT), a coherent process normally observed in three-level atomic media [2]. Due to this process, a small transparency window with low absorption appears in the spectral response of the metamaterial. Simultaneously, extremely steep normal dispersion is observed in the transparency window, which is useful for slow-light applications.
Abstract Electromagnetically induced transparency (EIT) is a quantum interference effect arising from different transition pathways of optical fields. Within the transparency window, both absorption and dispersion properties strongly change, which results in extensive applications such as slow light and optical storage. Due to the ultrahigh quality factors, massive production on a chip and convenient all‐optical control, optical microcavities provide an ideal platform for realizing EIT. Here we review the principle and recent development of EIT in optical microcavities. We focus on the following three situations. First, for a coupled‐cavity system, all‐optical EIT appears when the optical modes in different cavities couple to each other. Second, in a single microcavity, all‐optical EIT is created when interference happens between two optical modes. Moreover, the mechanical oscillation of the microcavity leads to optomechanically induced transparency. Then the applications of EIT effect in microcavity systems are discussed, including light delay and storage, sensing, and field enhancement. A summary is then given in the final part of the paper.