The aim of this proposal is to demonstrate the key elements needed to construct a logical qubit in diamond by exploiting the remarkable quantum properties of the nitrogen-vacancy (NV) optical centre. Specifically, the focus of the work was to address the materials and fabrication issues. We have demonstrated (i) that individual NV qubits can be fabricated by ion implantation with long coherence times (>350 microseconds at room temperature), (ii) electrical control of the optical output of each individual centre is achievable via the Stark shift, (iii) coherent population trapping of ensembles and single NV centres allowing for all-optical control of qubit operations and (iv) that waveguides, cavities and photonic band-gap structures can be fabricated in single crystal diamond. We have thus demonstrated a nanofabrication tool-kit for diamond which is sufficiently robust and mature to justify future investment in the design and implementation of a scalable quantum computing architecture for diamond.
The aim of this proposal is to demonstrate the key elements needed to construct a logical qubit in diamond by exploiting the remarkable quantum properties of the nitrogen-vacancy (NV) optical centre. Specifically, the focus of the work was to address the materials and fabrication issues. We have demonstrated (i) that individual NV qubits can be fabricated by ion implantation with long coherence times (>350 microseconds at room temperature), (ii) electrical control of the optical output of each individual centre is achievable via the Stark shift, (iii) coherent population trapping of ensembles and single NV centres allowing for all-optical control of qubit operations and (iv) that waveguides, cavities and photonic band-gap structures can be fabricated in single crystal diamond. We have thus demonstrated a nanofabrication tool-kit for diamond which is sufficiently robust and mature to justify future investment in the design and implementation of a scalable quantum computing architecture for diamond.
We discuss how Very Large Scale Integration (VLSI) fabrication techniques can be used to build scalable solid-state quantum computers in diamond with either room temperature operation, or low temperature operation with photonic control. For this discussion we consider nitrogen-vacancy (NV) color centers where the qubits are electron and/or nuclear spins. To achieve scalability the NV centers are placed in well-defined locations using ion implantation, and are controlled using optical and/or microwave excitation as well as localized static electric and/or magnetic fields.
Abstract The nitrogen-vacancy (NV) centre in diamond is a premier solid-state defect for quantum information processing and metrology. An integrated diamond quantum device harnesses the collective properties of multiple NV centres, enabling room-temperature quantum computing and sensing. While large-scale devices are poised to fill an important gap in the burgeoning quantum technology landscape, their practical realisation has not been achieved using current top-down fabrication techniques such as ion implantation. Consequently, this necessitates the development of a bottom-up fabrication technique, which is scalable, deterministic, and possesses atomic-scale precision. Informed by existing methods for fabricating phosphorous defect qubits in silicon, we envision a hydrogen depassivation lithography technique for atomically-precise manufacturing of nitrogen-vacancy centres in diamond. This perspective article outlines a viable multi-step procedure for realising scalable fabrication of diamond quantum devices and identifies the key challenges in its development.
The nitrogen vacancy (NV) center in diamond has in recent years emerged as a promising solid state system for quantum information processing and sensing applications.However, using NV centers to build up quantum networks for these applications faces several challenges, such as the lack of efficient interface between NVs and photons, difficulty of maintaining spin coherence times, and scalable techniques for fabrication of NV-photon networks.This thesis focuses on overcoming these challenges by fabricating diamond devices to improve the collection efficiency of NV photon emission, especially from the zero phonon line (ZPL), while maintaining long spin coherence times after fabrication.After an introduction to the subject matter in Chapter 1, Chapter 2 discusses a fabrication technique to produce vertical membranes out of bulk diamond plates.This work showed that after reactive ion etching, the spin properties of isolated NVs in diamond nanostructures were largely preserved.We also observed increased photoluminescence collection from shallow implanted NV centers in these slabs.In Chapter 3, we describe a versatile nanofabrication method based on re-usable silicon membrane hard masks, patterned using standard lithography and mature silicon processing technology.These masks are transferred precisely onto targeted regions of diamond membranes, where photonic devices can be realized without the need for spin coating, wet etching or electron beam exposure.Chapter 4 describes and demonstrates an alternative technique for fabricating one-dimensional photonic crystal (PC) cavities in single-crystal diamond by a combination of reactive ion etching (RIE) and focused ion beam milling.We compare it to transferred silicon hard mask lithography with RIE.Chapter 5 demonstrate NV-nanocavity systems in the strong Purcell regime with consistently high Q factors while preserving the long spin coherence times of NVs.These systems enable coherent spin control of cavity-coupled semiconductor qubits with coherence times exceeding 200 s -an increase by two orders of magnitude over previously reported optical cavity-coupled solid-state qubits.helped monitor the whole process.Special thanks go to our collaborators from BNL nanofabrication experts, namely to
The purpose of this project was to develop quantum computing hardware suitable for implementing quantum lattice-gas algorithms, with eventual application to turbulent flow simulations. A number of quantum systems were investigated, including rare-earth dopants in oxide crystals and in II-VI semiconductors. However, in the option year it was decided to concentrate exclusively on nitrogen-vacancy (NV) color centers in diamond. Surprising, it was found that NV diamond exhibited the key elements needed to develop few-qubit room-temperature solid-state quantum processing nodes. This included the ability to optically initialize and readout the NV electron spin state, fractional millisecond lifetimes for electron spins, and few-nanosecond electron spin Rabi flops. We also demonstrated the relatively long distance (few nanometer) coupling of a single NV spin to the electron spin of a single substitutional nitrogen (N). To achieve long range optical interconnections and entanglement between nodes, cryogenic cooling will likely still be required to sufficiently narrow the optical absorption lines. To this end we located diamond samples with unusually high purity, and found NV centers in these crystals that exhibited exceptionally narrowband and stable optical lines. We also demonstrated electric field tuning of the optical transition frequency as required for controlling atom-atom and atom-cavity coupling.
Manipulation of quantum effects for computing is an important step in the creation of faster and more powerful computational tools. The nitrogen vacancy centre (NVC) in diamond, when in the negative charge state, has shown significant promise towards being used as a qubit, such as optical polarization and readout, long coherence times (T∗ 2 and T2), and a long relaxation time T1. Such times are desired for producing good quantum memory, utilising the spin state of the sites. Cryogenic conditions are required for facilitating the optical entanglement of two NVC, and can serve to significantly extend these times. These sites have been created using a laser writing technique, capable of producing a large number of NVC with good coherence characteristics at arbitrary locations within diamond samples. This thesis reports on methods to reliably create NVC with good coherence characteristics for quantum computing applications by altering the annealing regime used. This annealing regime has been improved by the design and construction of a new vacuum furnace with better temperature control and thermometry. Steps towards the ideal combination of annealing conditions for a range of desired NV concentrations and characteristics have been undertaken, showing good conversion of laser written sites to NVC. NVC have been systematically tracked using a confocal fluorescence microscope apparatus throughout multiple annealing steps, with the collection of coherence data including T1, T2 and T∗ 2 on the same NV centre at multiple annealing temperatures, for the first time. This data allows for tracking of the influence of annealing temperature on the coherence properties of sites without the caveat of comparing data from either different sites, or different diamonds altogether. Such centres show coherence times above 800 μs, with production rates at and above 40% for single emitters. NVC are limited by their weak emission into the zero phonon line. These issues can be alleviated by increasing the collection efficiency of photons, which requires thin diamonds capable of being used with cavity systems. Steps towards producing such diamonds by a thin-region design have been undertaken and show promising results. Further efforts include the use of nanostructures on the diamond surface, which has been implemented and detailed. Magnetic control of NVC within diamond, especially at cryogenic temperatures, introduces some operational complexity to potential quantum operations. By implementing the use of diamond cut at the (111) crystal plane, this alignment is likely to become more straightforward, enabling future work with diamond at this crystal plane. Diamonds have been produced, with NVC laser written in, for the first time.