Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Diamond nanophotonic devices for quantum information processing and sensing

Luozhou Li

Published Jan 1, 2015• 0 citations
OpenAlex

Abstract

The nitrogen vacancy (NV) center in diamond has in recent years emerged as a promising solid state system for quantum information processing and sensing applications.However, using NV centers to build up quantum networks for these applications faces several challenges, such as the lack of efficient interface between NVs and photons, difficulty of maintaining spin coherence times, and scalable techniques for fabrication of NV-photon networks.This thesis focuses on overcoming these challenges by fabricating diamond devices to improve the collection efficiency of NV photon emission, especially from the zero phonon line (ZPL), while maintaining long spin coherence times after fabrication.After an introduction to the subject matter in Chapter 1, Chapter 2 discusses a fabrication technique to produce vertical membranes out of bulk diamond plates.This work showed that after reactive ion etching, the spin properties of isolated NVs in diamond nanostructures were largely preserved.We also observed increased photoluminescence collection from shallow implanted NV centers in these slabs.In Chapter 3, we describe a versatile nanofabrication method based on re-usable silicon membrane hard masks, patterned using standard lithography and mature silicon processing technology.These masks are transferred precisely onto targeted regions of diamond membranes, where photonic devices can be realized without the need for spin coating, wet etching or electron beam exposure.Chapter 4 describes and demonstrates an alternative technique for fabricating one-dimensional photonic crystal (PC) cavities in single-crystal diamond by a combination of reactive ion etching (RIE) and focused ion beam milling.We compare it to transferred silicon hard mask lithography with RIE.Chapter 5 demonstrate NV-nanocavity systems in the strong Purcell regime with consistently high Q factors while preserving the long spin coherence times of NVs.These systems enable coherent spin control of cavity-coupled semiconductor qubits with coherence times exceeding 200 s -an increase by two orders of magnitude over previously reported optical cavity-coupled solid-state qubits.helped monitor the whole process.Special thanks go to our collaborators from BNL nanofabrication experts, namely to

Related papers

Topics in Nanophotonic Devices for Nitrogen-Vacancy Color Centers in Diamond

Thomas M. Babinec

Recently, developments in novel and high-purity materials allow for the presence of a single, solitary crystalline defect to define the electronic, magnetic, and optical functionality of a device. The discrete nature of the active dopant, whose properties are defined by a quantum mechanical description of its structure, enables radically new quantum investigations and applications in these arenas. Finally,there has been significant development in large-scale device engineering due to mature semiconductor manufacturing techniques. The diverse set of photonic device architectures offering light confinement, guiding, and extraction is a prime example. These three paradigms – solitary dopant photonics and optoelectronics (solotronics), quantum science\tand technology, and device engineering – merge in the development of novel quantum photonic devices for the next generation of information processing systems. We present in this thesis a series of investigations of optical nanostructures for single optically active spins in single crystal diamond. Chapter 1 introduces the Nitrogen-Vacancy (NV) color center, summarizes its applications, and motivates the need for their integration into photonic structures. Chapter 2 describes two prototype nanobeam photonic crystal cavities for generating strong light-matter interactions with NV centers. The first device consists of a silicon nitride photonic crystal nanobeam cavity with high quality factor \\(Q \\sim 10^5\\) and small mode volume \\(V \\sim 0.5*(\\lambda/n)^3\\). The second device consists of a monolithic diamond nanobeam cavity fabricated with the focused ion beam (FIB) directly in a single crystal diamond sample. Chapter 3 presents a high-efficiency source of single photons consisting of a single NV center in a photonic diamond nanowire. Early FIB prototypes are described, as is the first successful realization of the device achieved via reactive ion etching nanowires in a single crystal diamond containing NV centers, and finally a variation of this approach based on incorporation of NV centers in pure diamond via ion implantation. In chapter 4 we consider the optimal design of photonic devices offering both collection efficiency and cavity-enhancements and extend the model of the NV center to include photonic effects. In chapter 5 we briefly introduce a novel optically active spin discovered in a diamond nanowire. Finally, in chapter 6 we conclude with several proposals to extend this research program.

ProQuest LLC eBooks•Mar 14, 2013•2 citations

Coherent control of nitrogen-vacancy centers in diamond nanostructures for quantum sensing and networking

Edward H. Chen

The exceptional optical and spin properties of the negatively charged nitrogen-vacancy (NV-) center in diamond have led to numerous applications ranging from super-resolution imaging to the exploration of previously untested new phenomena using quantum entanglement for information processing and sensing.The solid-state environment of the diamond allows us to engineer nanostructures, which are promising for enhancing the optical and spin properties of the NV-.To help develop a component needed for a diamondbased quantum network, we recently achieved coherent electron spin control of long-lived NV-s in diamond nanostructures using a transferrable hard-mask for both etching and ion implantation.We also developed a super-resolution imaging technique for characterizing such systems, and we furthermore demonstrate high-sensitivity electrometry using a large number of NV-s.However, it remains an open area of investigation whether certain nano-fabrication processes for patterning nanostructures into diamond cause irrecoverable damage or introduce atomic impurities to the crystal that would lead to a significant degradation of the NV-properties.Another remaining challenge is to produce fault-tolerant multi-qubit registers within nanostructures for improved robustness and scalability for use in compact quantum sensors or quantum networks.By building on the results in this thesis, it may be possible to design nanostructures for enhancing initialization, control and read-out fidelities of defect-based solid-state quantum technologies.

•Jan 1, 2016•0 citations

Quantum control of single spins and single photons in diamond

Toeno van der Sar

This thesis describes a series of experiments on the control of the optical properties of the nitrogen-vacancy (NV) center in diamond, and on control of the electron and nuclear spin states associated with the NV center. The NV center is a fluorescing atomic defect center in diamond, consisting of a substitutional nitrogen atom adjacent to a vacancy in the diamond carbon lattice. The electron spin of the NV center can be initialized and read out optically, and coherently manipulated with high fidelity even at room temperature. This unique combination of properties has attracted much attention to the NV center in recent years for application in quantum information technologies. The experiments in this work focus on exploiting the intrinsic hybrid nature of the NV center. The NV center forms a hybrid spin register, as its electron spin is always coupled to the nuclear spin of its own nitrogen nucleus, and can furthermore be coupled to additional nuclear carbon-13 spins in the diamond. In addition, the electronic spin state can be mapped onto the state of a photon, in principle allowing long range transmission of quantum information and measurement-based entanglement of distant NV center registers. The long-term goal is to achieve a large scale quantum network where the different constituents each perform the task they are most well suited for: the stable nuclear spins store the quantum information, photons transfer quantum information over long distances, and the fast electron spin interfaces between spin and photon states. For measurement-based entanglement of distant NV centers it is of primary importance to maximize the emission and detection of coherent photons emitted by the NV center. Spontaneous emission can be controlled and enhanced by coupling an emitter to a photonic cavity. Chapters 3, 4, and 5 of this thesis describe experiments aimed at maximizing the coherent photon emission rate of an NV center by coupling the NV center to a photonic crystal cavity. One of the main challenges is to position a single NV center into the nanometer-sized cavity mode. Chapter 3 describes the development of a nanopositioning technique, which allows diamond nanocrystals ~50 nm in size containing single NV centers to be placed at arbitrary locations on a chip, with nanometer precision. By using a sharp etched tungsten tip, individual nanocrystals can be picked up, moved and placed under real-time imaging with an electron microscope. We explicitly demonstrate that the unique optical and spin properties of the NV center are conserved by the nanopositioning process. In chapter 4, we apply the nanopositioning technique to couple single NV centers contained in a diamond nanocrystals to gallium phosphide photonic crystal cavities. These cavities resonate in the visible with high quality factors, and are designed to have the lowest energy mode coincide with the zero-phonon line of the NV center. Efficient coupling is evidenced by a strong enhancement of NV center emission at the cavity wavelength. The high quality factor of a photonic crystal cavity is a result of careful design and fabrication. The introduction of a nanocrystal may therefore be expected to have a detrimental effect on the optical properties of a cavity. In chapter 5 we investigate the effect of a nanocrystal on the optical properties of photonic crystal cavities. Our simulations and measurements show that the effect of a nanocrystal is in fact only minor, a promising result for future work on cavity-QED systems in the solid state and with diamond defect centers in particular. Understanding and mitigating decoherence is a key challenge for quantum science and technology. The main source of decoherence for solid-state spin systems is the uncontrolled spin bath environment. Chapter 6 describes experiments that exploit quantum control of the NV center and recently developed dynamical decoupling techniques to study the properties of the surrounding bath of spins belonging to single substitutional nitrogen atoms. The coherence properties of a single NV center are affected by changes in the state of the bath spins, allowing a single NV center to be used as a probe to detect bath spin resonances and study the quantum dynamics of the spin bath. We use quantum control of the spin bath to extend the dephasing time of the NV center, important for the application of the NV center in DC magnetometry. In chapter 7 we describe the development and implementation of decoherence protected quantum gates for the hybrid spin register formed by the NV center electron spin that is coupled to the nuclear spin of its own nitrogen atom. Electron and nuclear spins evolve and decohere at vastly different rates, making it challenging to use such a hybrid system as a fully functional quantum register. We create a universal set of two-qubit quantum gates by integrating dynamical decoupling techniques into the gate operation. We demonstrate the power of our gate design by implementing for the first time Grover's quantum search algorithm on a solid-state spin register.

•Mar 27, 2012•1 citation

Quantum Optics in Diamond Nanophotonic Chips

Dirk Robert Englund

Abstract : This report summarizes our recent progress on the development of photonic nanostructures for sensing and information processing. We have developed a nitrogen vacancy (NV) spin qubit-cavity system in the strong Purcell regime in which the spin qubit predominantly interacts with the cavity mode. This system is realized in a single-crystal diamond photonic crystal nanocavity with quality factors (Q) up to 104. Furthermore, we measure electron spin coherence times of cavity-coupled NVs of 200 us. We have also developed techniques for NV-based super-resolution imaging and precision sensing, using high-speed parallel readout on a microscope camera; and we have developed techniques for precision clocks based on collective oscillation of ensembles of NVs. We also report on graphene electro-optic devices and sensors.

•Jul 1, 2014•0 citations

Diamond-based Fabry-Perot microcavities for quantum networks

Stefan Bogdanović

A quantumnetwork would allow the distribution of a quantum state over many spatially separated quantum nodes which individually possess the ability to generate, process and store quantum information. Connecting these nodes through quantum communication channels would enable sending quantum information over arbitrarily long distances, secret key distribution with guaranteed secure communication and distributed quantum computing. An appealing platform for implementation of quantum networks is the nitrogen-vacancy (NV) center in diamond. An NV center is an optically active defect in diamond created by the substitution of two adjacent carbon atoms in the diamond crystal matrix by a nitrogen atom and a neighboring vacancy. The NV center fits remarkably well in the described quantum network framework. Its electronic spin can be optically initialized, read out in a single shot, coherently manipulated and coupled to the nearby carbon-13 nuclear spins. These properties represent necessary ingredients of a multi-qubit quantum node. The possibility of the entanglement between the state of the NV center spin and a photon establishes a photonic quantum link which can enable the entanglement of the quantum nodes, forming a quantum network. First building blocks of the proposed quantum networks based on NV centers were demonstrated by performing entanglement between two distant NV centers separated by more than a kilometer. However, the current success rate of the entangling protocols is greatly reduced due to the low emission probability of the NV center photons into the resonant zero phonon line (ZPL) and the inefficient photon extraction from the diamond. This is the central problem which prevents promoting our experiments beyond proof-of-principle demonstration towards practical implementation of the proposed quantumnetworks. The goal of this thesis is tackling these issues by coupling NV centers to optical cavities which would greatly increase the rate of generation and collection of the ZPL photons through themechanism of Purcell enhancement. The design and the fabrication of the components constituting a diamond-basedFabry-Perot microcavity, as used in this thesis, are described in Chapter 4. For large enhancement of the NV center resonant emission, a low cavity mode volume is necessary. This is achieved by inserting a micrometers thin diamond slab into the cavity architecture; we present the fabrication details of such samples. Chapter 5 describes the fabrication of an integrated platform for microwave signal delivery to the NV centers within a diamond membrane in the cavity architecture. Microwave striplines and arrays of unique markers are embedded in the mirror onto which the diamond is bonded. We investigate the mirror optical properties post fabrication and find that the fabrication method preserves the mirror optical performance. We describe the diamond bonding method and demonstrate addressing of the NV center spin. In Chapter 6 we probe the properties of the cavity with the embedded diamond membrane through measurements of the cavity finesse. We investigate the cavity finesse dependence on length, mode structure and temperature. We further explore the operation at cryogenic temperatures by probing the effect of cryostation vibration on the cavity linewidth. Finally, in Chapter 7 we discuss ways of improving the existing experimental capabilities, outline the first steps for demonstrating enhancement of the NV center resonant emission and suggest future experiments that can be performed with this system. We conclude that coupling of the NV centers to the cavities developed in this research could lead to an increase of remote entanglement success rates by more than three orders of magnitude.

•Jan 1, 2017•0 citations

Cavity-enhanced quantum network nodes in diamond

Maximilian Ruf

With their ability to process and transfer quantum information, large-scale entanglement-based quantum networks could be at the heart of a new age of quantum information, enabling fundamentally new applications such as distributed quantum computation, quantum communication, and quantum enhanced sensing. Due to their long spin coherence, controllable local qubit registers and optically active spins, color centers in diamond are prime candidates for nodes of such a network, and have enabled some of the most advanced quantum network demonstrations to date. These demonstrations include the distribution of a 3-node GHZ state across a quantum network, entanglement swapping, entanglement distillation, and memory-enhanced quantum communication. To move beyond current proof-of-principle networks, a further increase of entanglement generation rates is crucial. This thesis presents theoretical and experimental work on enhancing the spin-photon interface of color centers in diamond to achieve this goal, making use of the Purcell effect. The discussed work follows two main directions: embedding of color centers in open, tuneable Fabry-Perot micro-cavities, and in all-diamond photonic crystal cavities. First, we describe theoretical and experimental progress towards cavity-enhanced quantum networks based on nitrogen-vacancy (NV) centers in diamond. Due to their first order sensitivity to electric fields, we choose to embed NV centers in microns-thin diamond membranes that can be integrated into open fiber-based micro-cavities. We develop analytical methods to optimize the design of such open cavity systems for maximum Purcell enhancement of embedded color centers. We demonstrate a method to fabricate optically coherent NV centers in microns-thin diamond membranes, and use such structures to demonstrate the resonant excitation and detection of coherent, Purcell enhanced NV emission. A theoretical model in excellent agreement with our results suggests our system can improve entanglement rates between distant NV centers by two orders of magnitude with near-term improvements to the setup. Second, we describe progress towards an efficient spin-photon interface of group-IV color centers in diamond by coupling them to photonic nanostructures, allowing for large-scale integration. Due to their first-order insensitivity to electric fields, group-IV color centers can be brought in close proximity to surfaces (~ 100 nm), allowing for sub-wavelength mode volumes and thus very high Purcell factors. We numerically optimize photonic crystal cavity designs to maximize the Purcell enhancement of embedded emitters, test the robustness of our designs to real-world fabrication imperfections, and devise a method to efficiently interface nanophotonic structures. We then proceed to fabricate all-diamond photonic crystal cavities, making use of a dry etching technique that is selective to different crystallographic directions, and characterize the resulting optical quality factors. Finally, we marry the developed fabrication methods to fabricate microns-sized diamond platelets that can be transferred from a holding frame in a controlled fashion. This capability could be crucial for the realization of hybrid photonic circuits that we expect to be at the heart of future large-scale quantum networks.

•Oct 12, 2021•2 citations
The nitrogen vacancy (NV) center in diamond has in recent years emerged as a promising solid state system for quantum information processing and sensing applications.However, using NV centers to build up quantum networks for these applications faces several challenges, such as the lack of efficient interface between NVs and photons, difficulty of maintaining spin coherence times, and scalable techniques for fabrication of NV-photon networks.This thesis focuses on overcoming these challenges by fabricating diamond devices to improve the collection efficiency of NV photon emission, especially from the zero phonon line (ZPL), while maintaining long spin coherence times after fabrication.After an introduction to the subject matter in Chapter 1, Chapter 2 discusses a fabrication technique to produce vertical membranes out of bulk diamond plates.This work showed that after reactive ion etching, the spin properties of isolated NVs in diamond nanostructures were largely preserved.We also observed increased photoluminescence collection from shallow implanted NV centers in these slabs.In Chapter 3, we describe a versatile nanofabrication method based on re-usable silicon membrane hard masks, patterned using standard lithography and mature silicon processing technology.These masks are transferred precisely onto targeted regions of diamond membranes, where photonic devices can be realized without the need for spin coating, wet etching or electron beam exposure.Chapter 4 describes and demonstrates an alternative technique for fabricating one-dimensional photonic crystal (PC) cavities in single-crystal diamond by a combination of reactive ion etching (RIE) and focused ion beam milling.We compare it to transferred silicon hard mask lithography with RIE.Chapter 5 demonstrate NV-nanocavity systems in the strong Purcell regime with consistently high Q factors while preserving the long spin coherence times of NVs.These systems enable coherent spin control of cavity-coupled semiconductor qubits with coherence times exceeding 200 s -an increase by two orders of magnitude over previously reported optical cavity-coupled solid-state qubits.helped monitor the whole process.Special thanks go to our collaborators from BNL nanofabrication experts, namely to
Recently, developments in novel and high-purity materials allow for the presence of a single, solitary crystalline defect to define the electronic, magnetic, and optical functionality of a device. The discrete nature of the active dopant, whose properties are defined by a quantum mechanical description of its structure, enables radically new quantum investigations and applications in these arenas. Finally,there has been significant development in large-scale device engineering due to mature semiconductor manufacturing techniques. The diverse set of photonic device architectures offering light confinement, guiding, and extraction is a prime example. These three paradigms – solitary dopant photonics and optoelectronics (solotronics), quantum science\tand technology, and device engineering – merge in the development of novel quantum photonic devices for the next generation of information processing systems. We present in this thesis a series of investigations of optical nanostructures for single optically active spins in single crystal diamond. Chapter 1 introduces the Nitrogen-Vacancy (NV) color center, summarizes its applications, and motivates the need for their integration into photonic structures. Chapter 2 describes two prototype nanobeam photonic crystal cavities for generating strong light-matter interactions with NV centers. The first device consists of a silicon nitride photonic crystal nanobeam cavity with high quality factor \\(Q \\sim 10^5\\) and small mode volume \\(V \\sim 0.5*(\\lambda/n)^3\\). The second device consists of a monolithic diamond nanobeam cavity fabricated with the focused ion beam (FIB) directly in a single crystal diamond sample. Chapter 3 presents a high-efficiency source of single photons consisting of a single NV center in a photonic diamond nanowire. Early FIB prototypes are described, as is the first successful realization of the device achieved via reactive ion etching nanowires in a single crystal diamond containing NV centers, and finally a variation of this approach based on incorporation of NV centers in pure diamond via ion implantation. In chapter 4 we consider the optimal design of photonic devices offering both collection efficiency and cavity-enhancements and extend the model of the NV center to include photonic effects. In chapter 5 we briefly introduce a novel optically active spin discovered in a diamond nanowire. Finally, in chapter 6 we conclude with several proposals to extend this research program.
The exceptional optical and spin properties of the negatively charged nitrogen-vacancy (NV-) center in diamond have led to numerous applications ranging from super-resolution imaging to the exploration of previously untested new phenomena using quantum entanglement for information processing and sensing.The solid-state environment of the diamond allows us to engineer nanostructures, which are promising for enhancing the optical and spin properties of the NV-.To help develop a component needed for a diamondbased quantum network, we recently achieved coherent electron spin control of long-lived NV-s in diamond nanostructures using a transferrable hard-mask for both etching and ion implantation.We also developed a super-resolution imaging technique for characterizing such systems, and we furthermore demonstrate high-sensitivity electrometry using a large number of NV-s.However, it remains an open area of investigation whether certain nano-fabrication processes for patterning nanostructures into diamond cause irrecoverable damage or introduce atomic impurities to the crystal that would lead to a significant degradation of the NV-properties.Another remaining challenge is to produce fault-tolerant multi-qubit registers within nanostructures for improved robustness and scalability for use in compact quantum sensors or quantum networks.By building on the results in this thesis, it may be possible to design nanostructures for enhancing initialization, control and read-out fidelities of defect-based solid-state quantum technologies.
This thesis describes a series of experiments on the control of the optical properties of the nitrogen-vacancy (NV) center in diamond, and on control of the electron and nuclear spin states associated with the NV center. The NV center is a fluorescing atomic defect center in diamond, consisting of a substitutional nitrogen atom adjacent to a vacancy in the diamond carbon lattice. The electron spin of the NV center can be initialized and read out optically, and coherently manipulated with high fidelity even at room temperature. This unique combination of properties has attracted much attention to the NV center in recent years for application in quantum information technologies. The experiments in this work focus on exploiting the intrinsic hybrid nature of the NV center. The NV center forms a hybrid spin register, as its electron spin is always coupled to the nuclear spin of its own nitrogen nucleus, and can furthermore be coupled to additional nuclear carbon-13 spins in the diamond. In addition, the electronic spin state can be mapped onto the state of a photon, in principle allowing long range transmission of quantum information and measurement-based entanglement of distant NV center registers. The long-term goal is to achieve a large scale quantum network where the different constituents each perform the task they are most well suited for: the stable nuclear spins store the quantum information, photons transfer quantum information over long distances, and the fast electron spin interfaces between spin and photon states. For measurement-based entanglement of distant NV centers it is of primary importance to maximize the emission and detection of coherent photons emitted by the NV center. Spontaneous emission can be controlled and enhanced by coupling an emitter to a photonic cavity. Chapters 3, 4, and 5 of this thesis describe experiments aimed at maximizing the coherent photon emission rate of an NV center by coupling the NV center to a photonic crystal cavity. One of the main challenges is to position a single NV center into the nanometer-sized cavity mode. Chapter 3 describes the development of a nanopositioning technique, which allows diamond nanocrystals ~50 nm in size containing single NV centers to be placed at arbitrary locations on a chip, with nanometer precision. By using a sharp etched tungsten tip, individual nanocrystals can be picked up, moved and placed under real-time imaging with an electron microscope. We explicitly demonstrate that the unique optical and spin properties of the NV center are conserved by the nanopositioning process. In chapter 4, we apply the nanopositioning technique to couple single NV centers contained in a diamond nanocrystals to gallium phosphide photonic crystal cavities. These cavities resonate in the visible with high quality factors, and are designed to have the lowest energy mode coincide with the zero-phonon line of the NV center. Efficient coupling is evidenced by a strong enhancement of NV center emission at the cavity wavelength. The high quality factor of a photonic crystal cavity is a result of careful design and fabrication. The introduction of a nanocrystal may therefore be expected to have a detrimental effect on the optical properties of a cavity. In chapter 5 we investigate the effect of a nanocrystal on the optical properties of photonic crystal cavities. Our simulations and measurements show that the effect of a nanocrystal is in fact only minor, a promising result for future work on cavity-QED systems in the solid state and with diamond defect centers in particular. Understanding and mitigating decoherence is a key challenge for quantum science and technology. The main source of decoherence for solid-state spin systems is the uncontrolled spin bath environment. Chapter 6 describes experiments that exploit quantum control of the NV center and recently developed dynamical decoupling techniques to study the properties of the surrounding bath of spins belonging to single substitutional nitrogen atoms. The coherence properties of a single NV center are affected by changes in the state of the bath spins, allowing a single NV center to be used as a probe to detect bath spin resonances and study the quantum dynamics of the spin bath. We use quantum control of the spin bath to extend the dephasing time of the NV center, important for the application of the NV center in DC magnetometry. In chapter 7 we describe the development and implementation of decoherence protected quantum gates for the hybrid spin register formed by the NV center electron spin that is coupled to the nuclear spin of its own nitrogen atom. Electron and nuclear spins evolve and decohere at vastly different rates, making it challenging to use such a hybrid system as a fully functional quantum register. We create a universal set of two-qubit quantum gates by integrating dynamical decoupling techniques into the gate operation. We demonstrate the power of our gate design by implementing for the first time Grover's quantum search algorithm on a solid-state spin register.
Abstract : This report summarizes our recent progress on the development of photonic nanostructures for sensing and information processing. We have developed a nitrogen vacancy (NV) spin qubit-cavity system in the strong Purcell regime in which the spin qubit predominantly interacts with the cavity mode. This system is realized in a single-crystal diamond photonic crystal nanocavity with quality factors (Q) up to 104. Furthermore, we measure electron spin coherence times of cavity-coupled NVs of 200 us. We have also developed techniques for NV-based super-resolution imaging and precision sensing, using high-speed parallel readout on a microscope camera; and we have developed techniques for precision clocks based on collective oscillation of ensembles of NVs. We also report on graphene electro-optic devices and sensors.
A quantumnetwork would allow the distribution of a quantum state over many spatially separated quantum nodes which individually possess the ability to generate, process and store quantum information. Connecting these nodes through quantum communication channels would enable sending quantum information over arbitrarily long distances, secret key distribution with guaranteed secure communication and distributed quantum computing. An appealing platform for implementation of quantum networks is the nitrogen-vacancy (NV) center in diamond. An NV center is an optically active defect in diamond created by the substitution of two adjacent carbon atoms in the diamond crystal matrix by a nitrogen atom and a neighboring vacancy. The NV center fits remarkably well in the described quantum network framework. Its electronic spin can be optically initialized, read out in a single shot, coherently manipulated and coupled to the nearby carbon-13 nuclear spins. These properties represent necessary ingredients of a multi-qubit quantum node. The possibility of the entanglement between the state of the NV center spin and a photon establishes a photonic quantum link which can enable the entanglement of the quantum nodes, forming a quantum network. First building blocks of the proposed quantum networks based on NV centers were demonstrated by performing entanglement between two distant NV centers separated by more than a kilometer. However, the current success rate of the entangling protocols is greatly reduced due to the low emission probability of the NV center photons into the resonant zero phonon line (ZPL) and the inefficient photon extraction from the diamond. This is the central problem which prevents promoting our experiments beyond proof-of-principle demonstration towards practical implementation of the proposed quantumnetworks. The goal of this thesis is tackling these issues by coupling NV centers to optical cavities which would greatly increase the rate of generation and collection of the ZPL photons through themechanism of Purcell enhancement. The design and the fabrication of the components constituting a diamond-basedFabry-Perot microcavity, as used in this thesis, are described in Chapter 4. For large enhancement of the NV center resonant emission, a low cavity mode volume is necessary. This is achieved by inserting a micrometers thin diamond slab into the cavity architecture; we present the fabrication details of such samples. Chapter 5 describes the fabrication of an integrated platform for microwave signal delivery to the NV centers within a diamond membrane in the cavity architecture. Microwave striplines and arrays of unique markers are embedded in the mirror onto which the diamond is bonded. We investigate the mirror optical properties post fabrication and find that the fabrication method preserves the mirror optical performance. We describe the diamond bonding method and demonstrate addressing of the NV center spin. In Chapter 6 we probe the properties of the cavity with the embedded diamond membrane through measurements of the cavity finesse. We investigate the cavity finesse dependence on length, mode structure and temperature. We further explore the operation at cryogenic temperatures by probing the effect of cryostation vibration on the cavity linewidth. Finally, in Chapter 7 we discuss ways of improving the existing experimental capabilities, outline the first steps for demonstrating enhancement of the NV center resonant emission and suggest future experiments that can be performed with this system. We conclude that coupling of the NV centers to the cavities developed in this research could lead to an increase of remote entanglement success rates by more than three orders of magnitude.
With their ability to process and transfer quantum information, large-scale entanglement-based quantum networks could be at the heart of a new age of quantum information, enabling fundamentally new applications such as distributed quantum computation, quantum communication, and quantum enhanced sensing. Due to their long spin coherence, controllable local qubit registers and optically active spins, color centers in diamond are prime candidates for nodes of such a network, and have enabled some of the most advanced quantum network demonstrations to date. These demonstrations include the distribution of a 3-node GHZ state across a quantum network, entanglement swapping, entanglement distillation, and memory-enhanced quantum communication. To move beyond current proof-of-principle networks, a further increase of entanglement generation rates is crucial. This thesis presents theoretical and experimental work on enhancing the spin-photon interface of color centers in diamond to achieve this goal, making use of the Purcell effect. The discussed work follows two main directions: embedding of color centers in open, tuneable Fabry-Perot micro-cavities, and in all-diamond photonic crystal cavities. First, we describe theoretical and experimental progress towards cavity-enhanced quantum networks based on nitrogen-vacancy (NV) centers in diamond. Due to their first order sensitivity to electric fields, we choose to embed NV centers in microns-thin diamond membranes that can be integrated into open fiber-based micro-cavities. We develop analytical methods to optimize the design of such open cavity systems for maximum Purcell enhancement of embedded color centers. We demonstrate a method to fabricate optically coherent NV centers in microns-thin diamond membranes, and use such structures to demonstrate the resonant excitation and detection of coherent, Purcell enhanced NV emission. A theoretical model in excellent agreement with our results suggests our system can improve entanglement rates between distant NV centers by two orders of magnitude with near-term improvements to the setup. Second, we describe progress towards an efficient spin-photon interface of group-IV color centers in diamond by coupling them to photonic nanostructures, allowing for large-scale integration. Due to their first-order insensitivity to electric fields, group-IV color centers can be brought in close proximity to surfaces (~ 100 nm), allowing for sub-wavelength mode volumes and thus very high Purcell factors. We numerically optimize photonic crystal cavity designs to maximize the Purcell enhancement of embedded emitters, test the robustness of our designs to real-world fabrication imperfections, and devise a method to efficiently interface nanophotonic structures. We then proceed to fabricate all-diamond photonic crystal cavities, making use of a dry etching technique that is selective to different crystallographic directions, and characterize the resulting optical quality factors. Finally, we marry the developed fabrication methods to fabricate microns-sized diamond platelets that can be transferred from a holding frame in a controlled fashion. This capability could be crucial for the realization of hybrid photonic circuits that we expect to be at the heart of future large-scale quantum networks.