Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Sciences

Galvanic Phase Coupling of Superconducting Flux Qubits

Mun Dae Kim

Published Nov 29, 2021• 1 citation
Publisher

Abstract

We investigate the galvanic coupling schemes of superconducting flux qubits. From the fundamental boundary conditions, we obtain the effective potential of the coupled system of two or three flux qubits to provide the exact Lagrangian of the system. While usually the two-qubit gate has been investigated approximately, in this study we derive the exact inductive coupling strength between two flux qubits coupled directly and coupled through a connecting central loop. We observe that the inductive coupling strength needs to be included exactly to satisfy the criteria of fault-tolerant quantum computing.

DOI
10.3390/app112311309

Related papers

Galvanic coupling of flux qubits: simple theory and tunability

Alec Maassen van den Brink

Galvanic coupling of small-area (three-junction) flux qubits, using shared large Josephson junctions, has been shown to yield appreciable interaction strengths in a flexible design, which does not compromise the junctions' intrinsic good coherence properties. For an introduction, I recapitulate an elementary derivation of the coupling strength, which is subsequently generalized to the case of tunable coupling for a current-biased shared junction. While the ability to vary coupling constants by, say, 20% would be useful in experiments, sign-tunability (implying switchability) is highly preferable for several quantum-computing paradigms. This note sketches two ideas: a "crossbar" design with competing ferro- and antiferromagnetic current-biased tunable couplings, and a "mediated" one involving an extra loop between the qubits. The latter is a variation on proposals for tunable capacitive coupling of charge qubits, and tunable inductive coupling of large-area flux qubits.

arXiv:cond-mat/0605398•May 16, 2006•5 citations

Controllable coupling in phase-coupled flux qubits

Mun Dae Kim

We propose a scheme for tunable coupling of phase-coupled flux qubits. The phase-coupling scheme can provide a strong coupling strength of the order of Josephson coupling energy of Josephson junctions in the connecting loop, while the previously studied inductive coupling scheme cannot provide due to small mutual inductance and induced currents. We show that, in order to control the coupling, we need two dc SQUID's in the connecting loop and the control fluxes threading the dc SQUID's must be in opposite directions. The coupling strength is analytically calculated as a function of the control flux at the coresonance point.

arXiv:cond-mat/0602604•Physical Review B•Nov 2, 2006•12 citations

Direct Josephson coupling between superconducting flux qubits

M. Grajcar, A. Izmalkov, S. H. W. van der Ploeg +8 more

We have demonstrated strong antiferromagnetic coupling between two three-junction flux qubits based on a shared Josephson junction, and therefore not limited by the small inductances of the qubit loops. The coupling sign and magnitude were measured by coupling the system to a high-quality superconducting tank circuit. Design modifications allowing to continuously tune the coupling strength and/or make the coupling ferromagnetic are discussed.

arXiv:cond-mat/0501085•Physical Review B•Jul 14, 2005•59 citations

Fast two-bit operations in inductively coupled flux qubits

J. Q. You, Yasunobu Nakamura, Franco Nori

A central problem for implementing efficient quantum computing is how to realize fast operations (both one- and two-bit ones). However, this is difficult to achieve for a collection of qubits, especially for those separated far away, because the interbit coupling is usually much weaker than the intrabit coupling. Here we present an experimentally feasible method to effectively couple two flux qubits via a common inductance and treat both single and coupled flux qubits with more realistic models, which include the loop inductance. The main advantage of our proposal is that a strong interbit coupling can be achieved using a small inductance, so that two-bit as fast as one-bit operations can be easily realized. We also show the flux dependence of the transitions between states for the coupled flux qubits.

arXiv:cond-mat/0309491•Physical Review B•Jan 31, 2005•74 citations

PHASE-COUPLED FLUX QUBITS: CNOT OPERATION, CONTROLLABLE COUPLING AND ENTANGLEMENT

Mun Dae Kim

Coupling and entanglement of two flux qubits are studied. The three-Josephson junction qubits with threading fluxes are coupled by a connecting loop interrupted by Josephson junctions, but not by mutual inductance. By coupling the phase differences of the flux qubits using the connecting loop instead of the weak induced fluxes, present scheme offers the advantages of a large and tunable level splitting in implementing the controlled-NOT (CNOT) operation. We obtain the coupling strength as a function of the coupling energy of the Josephson junctions in connecting loop. The Josephson junction in the connecting loop can be replaced by dc-SQUID loop and, by varying the magnetic fluxes threading the dc-SQUID's, we can control the coupling strength of the coupled qubits. We also suggest a scheme to achieve the maximum entanglement of two phase-coupled flux qubits. Bell states are obtained at the ground and excited state of the coupled qubits system, as the energy levels are split and the two-qubit tunnelling channel is opened.

International Symposium on Mesoscopic Superconductivity and Spintronics (MS+S)•Oct 1, 2008•0 citations

Quantum theory of three-junction flux qubit with non-negligible loop inductance: Towards scalability

Timothy L. Robertson, B. L. T. Plourde, P. A. Reichardt +3 more

The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond $0.5$, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.

Physical Review B•May 30, 2006•23 citations
We investigate the galvanic coupling schemes of superconducting flux qubits. From the fundamental boundary conditions, we obtain the effective potential of the coupled system of two or three flux qubits to provide the exact Lagrangian of the system. While usually the two-qubit gate has been investigated approximately, in this study we derive the exact inductive coupling strength between two flux qubits coupled directly and coupled through a connecting central loop. We observe that the inductive coupling strength needs to be included exactly to satisfy the criteria of fault-tolerant quantum computing.
Galvanic coupling of small-area (three-junction) flux qubits, using shared large Josephson junctions, has been shown to yield appreciable interaction strengths in a flexible design, which does not compromise the junctions' intrinsic good coherence properties. For an introduction, I recapitulate an elementary derivation of the coupling strength, which is subsequently generalized to the case of tunable coupling for a current-biased shared junction. While the ability to vary coupling constants by, say, 20% would be useful in experiments, sign-tunability (implying switchability) is highly preferable for several quantum-computing paradigms. This note sketches two ideas: a "crossbar" design with competing ferro- and antiferromagnetic current-biased tunable couplings, and a "mediated" one involving an extra loop between the qubits. The latter is a variation on proposals for tunable capacitive coupling of charge qubits, and tunable inductive coupling of large-area flux qubits.
We propose a scheme for tunable coupling of phase-coupled flux qubits. The phase-coupling scheme can provide a strong coupling strength of the order of Josephson coupling energy of Josephson junctions in the connecting loop, while the previously studied inductive coupling scheme cannot provide due to small mutual inductance and induced currents. We show that, in order to control the coupling, we need two dc SQUID's in the connecting loop and the control fluxes threading the dc SQUID's must be in opposite directions. The coupling strength is analytically calculated as a function of the control flux at the coresonance point.
A central problem for implementing efficient quantum computing is how to realize fast operations (both one- and two-bit ones). However, this is difficult to achieve for a collection of qubits, especially for those separated far away, because the interbit coupling is usually much weaker than the intrabit coupling. Here we present an experimentally feasible method to effectively couple two flux qubits via a common inductance and treat both single and coupled flux qubits with more realistic models, which include the loop inductance. The main advantage of our proposal is that a strong interbit coupling can be achieved using a small inductance, so that two-bit as fast as one-bit operations can be easily realized. We also show the flux dependence of the transitions between states for the coupled flux qubits.
Coupling and entanglement of two flux qubits are studied. The three-Josephson junction qubits with threading fluxes are coupled by a connecting loop interrupted by Josephson junctions, but not by mutual inductance. By coupling the phase differences of the flux qubits using the connecting loop instead of the weak induced fluxes, present scheme offers the advantages of a large and tunable level splitting in implementing the controlled-NOT (CNOT) operation. We obtain the coupling strength as a function of the coupling energy of the Josephson junctions in connecting loop. The Josephson junction in the connecting loop can be replaced by dc-SQUID loop and, by varying the magnetic fluxes threading the dc-SQUID's, we can control the coupling strength of the coupled qubits. We also suggest a scheme to achieve the maximum entanglement of two phase-coupled flux qubits. Bell states are obtained at the ground and excited state of the coupled qubits system, as the energy levels are split and the two-qubit tunnelling channel is opened.
The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond 0.50.50.5, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.