Current quantum computers are plagued by prohibitive amounts of noise, which complicates the experimental realization of useful quantum algorithms that outperform classical computers.Quantum error mitigation techniques could constitute a potential avenue to demonstrate this feat without the need for fault-tolerant quantum error correction.One method in this family of mitigation techniques is the quasiprobability method introduced by Temme et al. [1].It simulates a noise-free quantum computer with a noisy one, with the caveat of only producing the correct expected values of measurement observables.The cost of a quasiprobability simulation manifests as a sampling overhead which scales exponentially in the number of error-mitigated gates in the circuit.In this thesis we aim to reduce the exponential basis of that overhead, which in turn allows the application of the quasiprobability method to deeper quantum circuits.A central result is the introduction of a novel scheme, which we call Stinespring algorithm, that aims to choose the quasiprobability decomposition in a noise-aware manner.Along the way, we introduce a generalization of the quasiprobability method, which we denote approximate quasiprobability method, that allows for a tradeoff between an approximation error and the sampling overhead.This method is already interesting on its own and we present a few potential applications.Finally, we present some ideas how quantum error correction can benefit from the quasiprobability method.This final part is separate to the other topics of the master thesis and gives a rough overview of a new research project that started towards the end of the thesis and that we will continue to pursue in the future.i Overview of ContributionsWe summarize the novel contributions from this thesis:• Many details in the presentation of Chapter 2 have not been stated in such precision in previous literature.However, we estimate that many of these contributions are evident for someone knowledgeable in the domain.• The channel difference decomposition (Section 2.6).• The approximate QPD and its applications (Chapter 3).• The Stinespring algorithm (Chapter 4).
Current quantum computers are plagued by prohibitive amounts of noise, which complicates the experimental realization of useful quantum algorithms that outperform classical computers.Quantum error mitigation techniques could constitute a potential avenue to demonstrate this feat without the need for fault-tolerant quantum error correction.One method in this family of mitigation techniques is the quasiprobability method introduced by Temme et al. [1].It simulates a noise-free quantum computer with a noisy one, with the caveat of only producing the correct expected values of measurement observables.The cost of a quasiprobability simulation manifests as a sampling overhead which scales exponentially in the number of error-mitigated gates in the circuit.In this thesis we aim to reduce the exponential basis of that overhead, which in turn allows the application of the quasiprobability method to deeper quantum circuits.A central result is the introduction of a novel scheme, which we call Stinespring algorithm, that aims to choose the quasiprobability decomposition in a noise-aware manner.Along the way, we introduce a generalization of the quasiprobability method, which we denote approximate quasiprobability method, that allows for a tradeoff between an approximation error and the sampling overhead.This method is already interesting on its own and we present a few potential applications.Finally, we present some ideas how quantum error correction can benefit from the quasiprobability method.This final part is separate to the other topics of the master thesis and gives a rough overview of a new research project that started towards the end of the thesis and that we will continue to pursue in the future.i Overview of ContributionsWe summarize the novel contributions from this thesis:• Many details in the presentation of Chapter 2 have not been stated in such precision in previous literature.However, we estimate that many of these contributions are evident for someone knowledgeable in the domain.• The channel difference decomposition (Section 2.6).• The approximate QPD and its applications (Chapter 3).• The Stinespring algorithm (Chapter 4).
Abstract Quantum error-mitigation techniques can reduce noise on current quantum hardware without the need for fault-tolerant quantum error correction. For instance, the quasiprobability method simulates a noise-free quantum computer using a noisy one, with the caveat of only producing the correct expected values of observables. The cost of this error mitigation technique manifests as a sampling overhead which scales exponentially in the number of corrected gates. In this work, we present an algorithm based on mathematical optimization that aims to choose the quasiprobability decomposition in a noise-aware manner. This directly leads to a significantly lower basis of the sampling overhead compared to existing approaches. A key element of the novel algorithm is a robust quasiprobability method that allows for a tradeoff between an approximation error and the sampling overhead via semidefinite programming.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
Quantum computing holds the potential to address problems that are currently considered intractable for classical processors by leveraging quantum mechanical effects for simulation, optimization, and chemistry. Despite recent technological progress, quantum hardware remains in the noisy intermediate-scale regime, where coherence limits, gate imperfections, and readout errors restrict circuit depth and algorithmic reliability. Although first demonstrations of small-scale Quantum Error Correction exist, logical processors with low logical error rates are still distant. In the near term, even error-corrected qubits are expected to operate with residual error, which means that improving calibration and mitigating errors at the physical and circuit level will remain essential for obtaining meaningful results. Established calibration routines and mitigation methods such as Zero-Noise-Extrapolation (ZNE) are valuable, but need to be further improved and more rigorously validated with respect to their underlying assumptions, stability and quantitative benefits. This thesis addresses error reduction techniques on transmon qubits through calibration, gate analysis, and circuit-level mitigation. First, a systematic comparison of two single-qubit amplitude calibration techniques is carried out (cross-point and ping-pong calibration), followed by an analysis of two implementations of a two-qubit gate, based on the cross-resonance interaction. The results show that cross-point calibration offers faster convergence, higher precision and a more favorable signal to noise ratio than ping-pong calibration. Hamiltonian tomography confirms the validity of a reduced model for the cross-resonance interaction, and algorithmic tests reveal that direct and echoed CNOT gates offer complementary advantages depending on the application. Second, the thesis develops and evaluates the method of Inverted-Circuit Zero-Noise-Extrapolation (IC-ZNE). Its main idea consists of measuring the effective error strength of a circuit through inverted circuits. This quantity is then used for extrapolation towards zero noise rather than relying on simple, approximate noise scaling assumptions as in standard ZNE. This approach constitutes a novel and original method. IC-ZNE consistently produces results closer to ideal reference values than standard ZNE. The method achieves up to 77% error reduction in observable error on the tested circuits compared to standard ZNE and simple post processing filters can yield up to 39% reduction in selected cases compared to standard ZNE. Further refinements introduce noise-adaptive circuit scaling strategies that enhance mitigation outcomes without significant additional cost. The performance of these techniques is examined across several circuits and in the context of variational quantum algorithms. Applications to the Quantum Approximate Optimization Algorithm and the Variational Quantum Eigensolver demonstrate that these techniques extend the useful operating regime of current devices, although their effectiveness decreases for very deep circuits or unfavorable variational ansätze. Taken together, the calibration and mitigation techniques investigated and developed in this thesis demonstrate practical routes toward enhancing the reliability of near-term quantum processors. While they cannot replace full fault-tolerant quantum computation, they offer useful and complementary capabilities that support progress toward scalable quantum technologies.
Quantum simulation is a potentially powerful application of quantum computing, holding the promise to be able to emulate interesting quantum systems beyond the reach of classical computing methods. Despite such promising applications, and the increase in active research, there is little introductory literature or demonstrations of the topic at a graduate or undergraduate student level. This artificially raises the barrier to entry into the field which already has a limited workforce, both in academia and industry. Here we present an introduction to simulating quantum systems, starting with a chosen Hamiltonian, overviewing state preparation and evolution, and discussing measurement methods. We provide an example simulation by measuring the state dynamics of a tight-binding model with disorder by time evolution using the Suzuki-Trotter decomposition. Furthermore, error mitigation and noise reduction are essential to executing quantum algorithms on currently available noisy quantum computers. We discuss and demonstrate various error mitigation and circuit optimization techniques that significantly improve performance. All source code is freely available, and we encourage the reader to build upon it.
Recent experimental breakthroughs have signalled the imminent arrival of the early fault-tolerant era. However, for a considerable period in the foreseeable future, relying solely on quantum error correction for full error suppression will remain extremely challenging due to its substantial hardware overhead. Additional help from quantum error mitigation (QEM) is essential for bridging this gap towards achieving quantum advantage. The application of QEM has so far been restricted to expectation value estimation, leaving its extension to sampling-based algorithms -- which is expected to play a pivotal role in the early fault-tolerant era -- an unresolved challenge. In this work, we present a framework for applying any QEM techniques to obtain the error-mitigated output distribution, showing that this incurs no greater cost than estimating a single observable. We also devised a way to sample from this distribution and constructed an explicit scheme for applying any QEM methods to quantum phase estimation, which can be generalised to other sampling algorithms. Numerical experiments were conducted to validate the efficacy of these methods. We believe our methods significantly broaden the scope of QEM, extending its applicability to most algorithms of practical interest and forming a crucial step towards realising quantum advantage.
Quantum computing exists at the intersection of mathematics, physics, chemistry, and engineering; the main goal of quantum computing is the creation of devices and algorithms which use the properties of quantum mechanics to store, manipulate and measure information. There exist many families of algorithms, which, using non-classical logical operations, can outperform traditional, classical algorithms in terms of memory and processing requirements. In addition, quantum computing devices are fundamentally smaller than classical processors and memory elements; since the physical models governing their performance are applicable on all scales, as opposed to classical logic elements, whose underlying principles rely on the macroscopic nature of the device in question. \n \nQuantum algorithms, for the most part, are predicated on a theory of resources. It is often assumed that quantum computers can be placed in a precise fiducial state prior to computation, and that logical operations are perfect, inducing no error on the system which they affect. These assumptions greatly simplify algorithmic design, but are fundamentally unrealistic. In order to justify their use, it is necessary to develop a framework for using a large number of imperfect devices to simulate the action of a perfect device, with some acceptable probability of failure. This is the study of fault-tolerant quantum computing. In order to pursue this study effectively, it is necessary to understand the fundamental nature of generic quantum states and operations, as well as the means by which one can correct quantum errors. Additionally, it is important to attempt to minimize the use of computational resources in achieving error reduction and fault-tolerant computing. \n \nThis thesis is concerned with three projects related to the use of error-prone quantum systems to transmit and manipulate information. The first of these is concerned with the use of imperfectly-prepared states in error-correction routines. Using optimal quantum error correction, we are able to deduce a method of partially protecting encoded quantum information against preparation errors prior to encoding, using no additional qubits. The second of these projects details the search for entangled states which can be used to transmit classical information over quantum channels at a rate superior to classical states. The third of these projects concerns the transcoding of data from one quantum code into another using few ancillary resources. The descriptions of these projects are preceded by a brief introduction to representations of quantum states and channels, for completeness. \n \nThree techniques of general interest are presented in appendices. The first is an introduction to, and a minor advance in the development of optimal error correction codes. The second is a more efficient means of calculating the action of a quantum channel on a given state, given that the channel acts non-trivially only on a subsystem, rather than the entire system. Finally, we include documentation on a software package developed to aid the search for quantum transcoding operations.