Quantum simulation is a potentially powerful application of quantum computing, holding the promise to be able to emulate interesting quantum systems beyond the reach of classical computing methods. Despite such promising applications, and the increase in active research, there is little introductory literature or demonstrations of the topic at a graduate or undergraduate student level. This artificially raises the barrier to entry into the field which already has a limited workforce, both in academia and industry. Here we present an introduction to simulating quantum systems, starting with a chosen Hamiltonian, overviewing state preparation and evolution, and discussing measurement methods. We provide an example simulation by measuring the state dynamics of a tight-binding model with disorder by time evolution using the Suzuki-Trotter decomposition. Furthermore, error mitigation and noise reduction are essential to executing quantum algorithms on currently available noisy quantum computers. We discuss and demonstrate various error mitigation and circuit optimization techniques that significantly improve performance. All source code is freely available, and we encourage the reader to build upon it.
Quantum simulation is a potentially powerful application of quantum computing, holding the promise to be able to emulate interesting quantum systems beyond the reach of classical computing methods. Despite such promising applications, and the increase in active research, there is little introductory literature or demonstrations of the topic at a graduate or undergraduate student level. This artificially raises the barrier to entry into the field which already has a limited workforce, both in academia and industry. Here we present an introduction to simulating quantum systems, starting with a chosen Hamiltonian, overviewing state preparation and evolution, and discussing measurement methods. We provide an example simulation by measuring the state dynamics of a tight-binding model with disorder by time evolution using the Suzuki-Trotter decomposition. Furthermore, error mitigation and noise reduction are essential to executing quantum algorithms on currently available noisy quantum computers. We discuss and demonstrate various error mitigation and circuit optimization techniques that significantly improve performance. All source code is freely available, and we encourage the reader to build upon it.
Quantum computing not only holds the potential to solve long-standing problems in quantum physics, but also to offer speed-ups across a broad spectrum of other fields. Access to a computational space that incorporates quantum effects, such as superposition and entanglement, enables the derivation of promising quantum algorithms for important tasks, including preparing the ground state of a quantum system or predicting its evolution over time. Successfully tackling these tasks promises insights into significant theoretical and technological questions, such as superconductivity and the design of new materials. The aim of quantum algorithms is to use a series of quantum operations in a quantum circuit to solve a problem beyond the reach of classical computers. However, the noise and limited scale of current quantum computers restricts these circuits to moderate sizes and depths. As a result, many prominent algorithms are currently infeasible to run for problem sizes of practical interest. In response, recent research focused on variational quantum algorithms, which allow the selection of circuits that act within a quantum device's capabilities. Yet, these algorithms can require the execution of a large number of circuits, leading to prohibitively long computation times. This doctoral thesis develops two main techniques to reduce these quantum computational resource requirements, with the goal of scaling up application sizes on current quantum processors. The first approach is based on stochastic approximations of computationally costly quantities, such as quantum circuit gradients or the quantum geometric tensor (QGT). The second method takes a different perspective on the QGT, leading to a potentially more efficient description of time evolution on current quantum computers. Both techniques rely on maintaining available information and only computing necessary corrections, instead of re-computing possibly redundant data. The main focus of application for our algorithms is the simulation of quantum systems, broadly defined as including the preparation of ground and thermal states, and the real- and imaginary-time propagation of a system. The developed subroutines, however, can further be utilized in the fields of optimization or machine learning. Our algorithms are benchmarked on a range of representative models, such as Ising or Heisenberg spin models, both in numerical simulations and experiments on the hardware. In combination with error mitigation techniques, the latter is scaled up to 27 qubits; into a regime that variational quantum algorithms are challenging to scale to on noisy quantum computers without our algorithms.
Quantum computing promises to revolutionize several scientific and technological domains through fundamentally new ways of processing information. Among its most compelling applications is digital quantum simulation, where quantum computers are used to replicate the behavior of other quantum systems. This could enable the study of problems that are otherwise intractable on classical computers, transforming fields such as quantum chemistry, condensed matter physics, and materials science. Despite this potential, realizations of practical quantum advantage for relevant problems are hindered by imperfections of current devices. This also affects quantum hardware based on superconducting circuits which is among the most advanced and scalable platforms. The envisaged long-term solution of fault-tolerant quantum computers that correct their own errors remains out of reach mainly due to the associated qubit number overhead. As a result, the field has developed strategies that combine quantum and classical resources, exploit hardware-native operations, and employ error mitigation techniques to extract meaningful results from noisy data. This doctoral thesis contributes to this broader effort by exploring methods for advancing quantum simulation across the full computational stack, including hardware-level innovations, refined techniques for noise modeling and error mitigation, and algorithmic improvements enabled by efficient measurement processing.
Quantum mechanical problems are among the hardest to simulate and, in some cases, remain intractable even for the most powerful computers. Quantum computing has emerged as a new technological platform to address such challenges, with rapid advances in recent years. Yet, current quantum devices remain noisy and limited in scale. Hence, it is essential to identify classically hard problems of practical interest and tractable with existing quantum devices. Among potential applications, the real-time simulation of quantum systems is one of the most promising to deliver an early, practical quantum advantage. This doctoral thesis is therefore centered around simulating quantum dynamics on quantum devices. We first present an overview of the most relevant quantum algorithms for quantum dynamics, highlighting respective advantages and limitations. Further, we identify relevant problems within quantum dynamics that could benefit from quantum simulation in the near future. Second, we propose a method for benchmarking hardware and error mitigation algorithms that is based on well-understood theoretical results and suffers from no scaling issues. The resulting quality metric is intuitive and transferable to other applications. We successfully implement the scheme on up to 133 qubits, demonstrating coherent evolution up to a two-qubit gate depth of 28, featuring 1396 two-qubit gates, before noise becomes prevalent. Third, we propose a novel variant of probabilistic error amplification to implement open quantum dynamics, relying on characterizing and altering hardware noise to mimic the system-environment interaction under study. Lastly, we present two studies on state preparation and phase classification: first, a hybrid algorithm to prepare ground states of electron-phonon systems; second, a quantum machine learning-based approach to distinguish phases in previously prepared quantum states.
Noise in quantum computers presents a challenge for the users of quantum computing despite the rapid progress we have seen in the past few years in building quantum computers. Existing works have addressed the noise in quantum computers using a variety of mitigation techniques since error correction requires a large number of qubits which is infeasible at present. One of the consequences of quantum computing noise is that users are unable to reproduce similar output from the same quantum computer at different times, let alone from various quantum computers. In this work, we have made initial attempts to visualize quantum basis states for all the circuits that were used in quantum machine learning from various quantum computers and noise-free quantum simulators. We have opened up a pathway for further research into this field where we will be able to isolate noisy states from non-noisy states leading to efficient error mitigation. This is where our work provides an important step in the direction of efficient error mitigation. Our work also provides a ground for quantum noise visualization in the case of large numbers of qubits.
Numerical simulation of quantum systems is crucial to further our understanding of natural phenomena. Many systems of key interest and importance, in areas such as superconducting materials and quantum chemistry, are thought to be described by models which we cannot solve with sufficient accuracy, neither analytically nor numerically with classical computers. Using a quantum computer to simulate such quantum systems has been viewed as a key application of quantum computation from the very beginning of the field in the 1980s. Moreover, useful results beyond the reach of classical computation are expected to be accessible with fewer than a hundred qubits, making quantum simulation potentially one of the earliest practical applications of quantum computers. In this paper we survey the theoretical and experimental development of quantum simulation using quantum computers, from the first ideas to the intense research efforts currently underway.
Quantum error mitigation (QEM) has emerged as a powerful tool for the extraction of useful quantum information from quantum devices. Here, we introduce the Subspace Noise Tailoring (SNT) algorithm, which efficiently combines the cheap cost of Symmetry Verification (SV) and low bias of Probabilistic Error Cancellation (PEC) QEM techniques. We study the performance of our method by simulating the Trotterized time evolution of the spin-1/2 Fermi-Hubbard model (FHM) using a variety of local fermion-to-qubit encodings, which define a computational subspace through a set of stabilizers, the measurement of which can be used to post-select noisy quantum data. We study different combinations of QEM and encodings and uncover a rich state diagram of optimal combinations, depending on the hardware performance, system size and available shot budget. We then demonstrate how SNT extends the reach of current noisy quantum computers in terms of the number of fermionic lattice sites and the number of Trotter steps, and quantify the required hardware performance beyond which a noisy device may compete with current state-of-the-art classical computational methods.