Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics D Applied Physics

A comprehensive study of the effects of different factors on anti-relaxation properties of octadecyltrichlorosilane-coated rubidium vapor cells

Haotian Chi, Heng Yuan, Zhongyu Cai, Xuelei Wang, Huining Shang, Zhaohui Hu, Binquan Zhou

Published Oct 12, 2021• 13 citations
Publisher

Abstract

Abstract Anti-relaxation coatings play an important role in enhancing the polarization lifetime of polarized alkali-metal atoms. In this study, octadecyltrichlorosilane (OTS) was coated in spherical rubidium vapor cells fabricated using borosilicate glass with two stems as anti-relaxation coatings. An orthogonal experiment method was employed to obtain the optimal conditions. The results showed that OTS concentration is the dominant factor in the number of bounces, followed by the soaking time and molar ratio/(H2O:OTS). The optimal parameters were 6 mM of OTS, 6:1 of molar ratio/(H2O:OTS), and 80 min of soaking time. The number of bounces can be up to 200. Atomic force microscope images showed that the number and coverage ratio of clusters on the anti-relaxation coating fabricated by the optimized parameters are significantly less than the number and coverage ratio of clusters formed by other conditions. This means that the clusters in the coatings significantly affect the anti-relaxation performance. In addition, five OTS-coated cells were fabricated by A3B3C5 combination. However, the variability from cell to cell using the exact same preparation procedure can be up to 43.6%. The variability may be caused by the different aging times of the OTS solution. Because only one beaker of OTS solution was prepared, the OTS solution was pumped into the cells in sequence, not at the same time.

DOI
10.1088/1361-6463/ac2f13

Related papers

Effects of water concentration in the coating solution on the wall relaxation rate of octadecyltrichlorosilane coated rubidium vapor cells

Guiying Zhang, Lihua Wei, Meiling Wang +1 more

High quality anti-relaxation surface coatings for atomic vapor cells are essential for the preservation of atomic spin coherence and the enhancement of measurement sensitivity. In this paper, we studied the effects of water concentration in octadecyltrichlorosilane (OTS) coating solution on the relaxation rate and its reproducibility of OTS coated Rubidium vapor cells. We found that appropriate water concentration can improve the anti-relaxation performance of OTS coated cells.

Journal of Applied Physics•Jan 28, 2015•24 citations

Anti-relaxation coating of the vapor cell

Xie Xin, Liu Yunhui, Bai Yuanyuan +1 more

In order to achieve the maximum possible polarization lifetime of the alkali atoms in the vapor cell, we discussed several spin-relaxation mechanisms and anti-relaxation methods. We found that octadecyltrichlorosilane (OTS) acts as an anti-relaxation coating for alkali atoms, with good effect in high-temperature conditions.

International Conference on Optoelectronics and Microelectronics•Sep 1, 2013•0 citations

Spin relaxation of rubidium atoms in an octadecyltrichlorosilane anti-relaxation and anti-reflection coated vacuum multipass cell

Shuguang Li, Pengfeng Dai, Jinsheng Liu +2 more

Optically-dense alkali-metal vapor cells with low optical losses are widely used in quantum precision measurements, yet atomic behaviors in coated cells still need further study. We developed an octadecyltrichlorosilane (OTS) anti-relaxation and dielectric anti-reflection coated multipass optical cell filled with rubidium vapor at high density, and investigated the spin relaxation as well as the spin noise of the atomic ensembles. High contrast spin noise spectrum was observed and we find that the quantum coherence lifetime is equal to the classical transverse spin relaxation time. Number density measurements give the spin-exchange possibility of 14% between rubidium atoms trapped in the coating.

Optical Materials Express•Oct 12, 2022•11 citations

Effect of Preparation Processes on Structural Thermal Stability and Collision Energy Dissipation of Common Antirelaxation Coatings on Quartz Substrates

Xinxin He, Xiaoya Liu, Jun Tang +5 more

Paraffin and octadecyltrichlorosilane (OTS) coatings can alleviate collisions between alkali-metal atoms and cell walls and then prolong the atomic spin-polarization lifetime. The surface structure and collision effects of these antirelaxation coatings, as well as the methods to avoid antirelaxation invalidity, have been the focus of researchers. This study investigated the thermolability of coating surface structure and the collision interactions between alkali metal atoms and coatings, considering the influence of various coating preparation factors, where this collision interaction is indirectly analyzed by measuring the collision energy dissipation between an atomic force microscopy (AFM) probe and the atoms on the coating surface. We found that appropriate evaporation time, carbochain length, and postannealing process can enhance the thermostability of the paraffin coating and eliminate its morphological defects. Furthermore, the OTS/water concentration, the soaking time, and the type of solvent have different levels of influence on the cluster formation and the thermostability of the OTS coatings. Moreover, the antirelaxation performance of coatings has been shown to be characterized by counting the energy dissipated when the AFM probe collides with the antirelaxation coating, replacing the conventional light-atom interaction- based method for measuring the relaxation characteristics, but requiring specific coating preparation factors to be maintained.

Langmuir•Aug 31, 2023•3 citations

Surface optimization and synergistic quantification method for OTS anti-relaxation coatings

Yian Xu, Hao Xia, Jiale Quan +5 more

To enhance the anti-relaxation performance of alkali metal vapor cells in quantum sensors, a synergistic optimization and quantitative evaluation strategy for surface parameters of octadecyl-trichlorosilane (OTS) anti-relaxation coatings is proposed. By systematically adjusting solution concentration and reaction time, both the polarization retention angle and the surface polarization retention cross-section are effectively optimized, achieving a maximum retention angle of 135°. A theoretical framework is subsequently established to quantify adsorption energy based on the inherent correlation between these two surface parameters. A correction method for the retention cross-section, developed through a non-uniform wetting model, enables in-situ mapping of the kinetic contribution to adsorption behavior. Through kinetic and thermodynamic parameter extraction, the adsorption energy and Gibbs free energy of the multilayer OTS coatings are determined to be 0.13 eV, which represents a substantial reduction compared to the adsorption energy of bare glass surfaces, previously reported as 2.01 eV. Furthermore, longitudinal relaxation time measurements are carried out inside vapor cells, yielding a maximum collision count of 593, which provides strong evidence of polarization preservation capability. This approach provides both theoretical guidance and an experimental pathway for optimizing coating performance and analyzing adsorption mechanisms, thereby facilitating the development of high-performance alkali metal vapor cell materials for quantum sensing applications. • Synergistic optimization of OTS coating parameters improved polarization retention, achieving a maximum retention angle of 135° by adjusting solution concentration (2-6 mM) and reaction time (60-120 min). • A heterogeneous wetting-based synergy quantification method is developed, enabling accurate evaluation of multilayer formation and local adsorption behavior by jointly analyzing retention angle and retention cross-section. • A combined thermodynamic-kinetic modeling framework establishes quantitative correlations between adsorption energy, Gibbs free energy, and coating surface characteristics, providing theoretical guidance for anti-relaxation material design. • Longitudinal relaxation tests in coated vapor cells demonstrate a maximum collision count of 593, confirming suppressed alkali-atom adsorption and strong polarization preservation consistent with the low adsorption energy of 0.13 eV.

Defence Technology•Apr 25, 2026•0 citations

Effects of organic film morphology on the formation of Rb clusters on surface coatings in alkali metal vapor cells

David M. Rampulla, Nuri Oncel, Esta Abelev +3 more

Surface relaxation rates differ for spin-polarized alkali atoms interacting with monolayer or bilayer octadecyltrichlorosilane (OTS) coatings. The morphology and composition of Rb vapor-exposed films of OTS have been studied with atomic force microscopy (AFM) and x-ray photoelectron spectroscopy (XPS). On OTS monolayers, numerous small (<500 nm wide) Rb containing islands nucleate at the boundaries of the ∼1–2 μm wide organic domains. On OTS bilayers, singular large (∼3 μm wide) Rb containing islands were found. Alkali island formation mediated by surface structure could affect the antirelaxation behavior of organic coatings used in atomic magnetometer cells.

Applied Physics Letters•Jan 26, 2009•25 citations
Abstract Anti-relaxation coatings play an important role in enhancing the polarization lifetime of polarized alkali-metal atoms. In this study, octadecyltrichlorosilane (OTS) was coated in spherical rubidium vapor cells fabricated using borosilicate glass with two stems as anti-relaxation coatings. An orthogonal experiment method was employed to obtain the optimal conditions. The results showed that OTS concentration is the dominant factor in the number of bounces, followed by the soaking time and molar ratio/(H2O:OTS). The optimal parameters were 6 mM of OTS, 6:1 of molar ratio/(H2O:OTS), and 80 min of soaking time. The number of bounces can be up to 200. Atomic force microscope images showed that the number and coverage ratio of clusters on the anti-relaxation coating fabricated by the optimized parameters are significantly less than the number and coverage ratio of clusters formed by other conditions. This means that the clusters in the coatings significantly affect the anti-relaxation performance. In addition, five OTS-coated cells were fabricated by A3B3C5 combination. However, the variability from cell to cell using the exact same preparation procedure can be up to 43.6%. The variability may be caused by the different aging times of the OTS solution. Because only one beaker of OTS solution was prepared, the OTS solution was pumped into the cells in sequence, not at the same time.
Optically-dense alkali-metal vapor cells with low optical losses are widely used in quantum precision measurements, yet atomic behaviors in coated cells still need further study. We developed an octadecyltrichlorosilane (OTS) anti-relaxation and dielectric anti-reflection coated multipass optical cell filled with rubidium vapor at high density, and investigated the spin relaxation as well as the spin noise of the atomic ensembles. High contrast spin noise spectrum was observed and we find that the quantum coherence lifetime is equal to the classical transverse spin relaxation time. Number density measurements give the spin-exchange possibility of 14% between rubidium atoms trapped in the coating.
Paraffin and octadecyltrichlorosilane (OTS) coatings can alleviate collisions between alkali-metal atoms and cell walls and then prolong the atomic spin-polarization lifetime. The surface structure and collision effects of these antirelaxation coatings, as well as the methods to avoid antirelaxation invalidity, have been the focus of researchers. This study investigated the thermolability of coating surface structure and the collision interactions between alkali metal atoms and coatings, considering the influence of various coating preparation factors, where this collision interaction is indirectly analyzed by measuring the collision energy dissipation between an atomic force microscopy (AFM) probe and the atoms on the coating surface. We found that appropriate evaporation time, carbochain length, and postannealing process can enhance the thermostability of the paraffin coating and eliminate its morphological defects. Furthermore, the OTS/water concentration, the soaking time, and the type of solvent have different levels of influence on the cluster formation and the thermostability of the OTS coatings. Moreover, the antirelaxation performance of coatings has been shown to be characterized by counting the energy dissipated when the AFM probe collides with the antirelaxation coating, replacing the conventional light-atom interaction- based method for measuring the relaxation characteristics, but requiring specific coating preparation factors to be maintained.
To enhance the anti-relaxation performance of alkali metal vapor cells in quantum sensors, a synergistic optimization and quantitative evaluation strategy for surface parameters of octadecyl-trichlorosilane (OTS) anti-relaxation coatings is proposed. By systematically adjusting solution concentration and reaction time, both the polarization retention angle and the surface polarization retention cross-section are effectively optimized, achieving a maximum retention angle of 135°. A theoretical framework is subsequently established to quantify adsorption energy based on the inherent correlation between these two surface parameters. A correction method for the retention cross-section, developed through a non-uniform wetting model, enables in-situ mapping of the kinetic contribution to adsorption behavior. Through kinetic and thermodynamic parameter extraction, the adsorption energy and Gibbs free energy of the multilayer OTS coatings are determined to be 0.13 eV, which represents a substantial reduction compared to the adsorption energy of bare glass surfaces, previously reported as 2.01 eV. Furthermore, longitudinal relaxation time measurements are carried out inside vapor cells, yielding a maximum collision count of 593, which provides strong evidence of polarization preservation capability. This approach provides both theoretical guidance and an experimental pathway for optimizing coating performance and analyzing adsorption mechanisms, thereby facilitating the development of high-performance alkali metal vapor cell materials for quantum sensing applications. • Synergistic optimization of OTS coating parameters improved polarization retention, achieving a maximum retention angle of 135° by adjusting solution concentration (2-6 mM) and reaction time (60-120 min). • A heterogeneous wetting-based synergy quantification method is developed, enabling accurate evaluation of multilayer formation and local adsorption behavior by jointly analyzing retention angle and retention cross-section. • A combined thermodynamic-kinetic modeling framework establishes quantitative correlations between adsorption energy, Gibbs free energy, and coating surface characteristics, providing theoretical guidance for anti-relaxation material design. • Longitudinal relaxation tests in coated vapor cells demonstrate a maximum collision count of 593, confirming suppressed alkali-atom adsorption and strong polarization preservation consistent with the low adsorption energy of 0.13 eV.
Surface relaxation rates differ for spin-polarized alkali atoms interacting with monolayer or bilayer octadecyltrichlorosilane (OTS) coatings. The morphology and composition of Rb vapor-exposed films of OTS have been studied with atomic force microscopy (AFM) and x-ray photoelectron spectroscopy (XPS). On OTS monolayers, numerous small (<500 nm wide) Rb containing islands nucleate at the boundaries of the ∼1–2 μm wide organic domains. On OTS bilayers, singular large (∼3 μm wide) Rb containing islands were found. Alkali island formation mediated by surface structure could affect the antirelaxation behavior of organic coatings used in atomic magnetometer cells.