Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Optoelectronics and Microelectronics

Anti-relaxation coating of the vapor cell

Xie Xin, Liu Yunhui, Bai Yuanyuan, Xu Yun-Fei

Published Sep 1, 2013• 0 citations
Publisher

Abstract

In order to achieve the maximum possible polarization lifetime of the alkali atoms in the vapor cell, we discussed several spin-relaxation mechanisms and anti-relaxation methods. We found that octadecyltrichlorosilane (OTS) acts as an anti-relaxation coating for alkali atoms, with good effect in high-temperature conditions.
DOI
10.1109/icoom.2013.6626535

Related papers

A comprehensive study of the effects of different factors on anti-relaxation properties of octadecyltrichlorosilane-coated rubidium vapor cells

Haotian Chi, Heng Yuan, Zhongyu Cai +4 more

Abstract Anti-relaxation coatings play an important role in enhancing the polarization lifetime of polarized alkali-metal atoms. In this study, octadecyltrichlorosilane (OTS) was coated in spherical rubidium vapor cells fabricated using borosilicate glass with two stems as anti-relaxation coatings. An orthogonal experiment method was employed to obtain the optimal conditions. The results showed that OTS concentration is the dominant factor in the number of bounces, followed by the soaking time and molar ratio/(H2O:OTS). The optimal parameters were 6 mM of OTS, 6:1 of molar ratio/(H2O:OTS), and 80 min of soaking time. The number of bounces can be up to 200. Atomic force microscope images showed that the number and coverage ratio of clusters on the anti-relaxation coating fabricated by the optimized parameters are significantly less than the number and coverage ratio of clusters formed by other conditions. This means that the clusters in the coatings significantly affect the anti-relaxation performance. In addition, five OTS-coated cells were fabricated by A3B3C5 combination. However, the variability from cell to cell using the exact same preparation procedure can be up to 43.6%. The variability may be caused by the different aging times of the OTS solution. Because only one beaker of OTS solution was prepared, the OTS solution was pumped into the cells in sequence, not at the same time.

Journal of Physics D Applied Physics•Oct 12, 2021•13 citations

High-temperature alkali vapor cells with antirelaxation surface coatings

Scott J. Seltzer, Michael V. Romalis

Antirelaxation surface coatings allow long spin relaxation times in alkali-metal cells without buffer gas, enabling faster diffusion of the alkali atoms throughout the cell and giving larger signals due to narrower optical linewidths. Effective coatings were previously unavailable for operation at temperatures above 80 °C. We demonstrate that octadecyltrichlorosilane (OTS) can allow potassium or rubidium atoms to experience hundreds of collisions with the cell surface before depolarizing, and that an OTS coating remains effective up to about 170 °C for both potassium and rubidium. We consider the experimental concerns of operating without buffer gas and with minimal quenching gas at high vapor density, studying the stricter need for effective quenching of excited atoms and deriving the optical rotation signal shape for atoms with resolved hyperfine structure in the spin-temperature regime. As an example of a high-temperature application of antirelaxation coated alkali vapor cells, we operate a spin-exchange relaxation-free atomic magnetometer with sensitivity of 6 fT/Hz and magnetic linewidth as narrow as 2 Hz.

arXiv:0906.3054•Journal of Applied Physics•Dec 1, 2009•146 citations

Spin relaxation of rubidium atoms in an octadecyltrichlorosilane anti-relaxation and anti-reflection coated vacuum multipass cell

Shuguang Li, Pengfeng Dai, Jinsheng Liu +2 more

Optically-dense alkali-metal vapor cells with low optical losses are widely used in quantum precision measurements, yet atomic behaviors in coated cells still need further study. We developed an octadecyltrichlorosilane (OTS) anti-relaxation and dielectric anti-reflection coated multipass optical cell filled with rubidium vapor at high density, and investigated the spin relaxation as well as the spin noise of the atomic ensembles. High contrast spin noise spectrum was observed and we find that the quantum coherence lifetime is equal to the classical transverse spin relaxation time. Number density measurements give the spin-exchange possibility of 14% between rubidium atoms trapped in the coating.

Optical Materials Express•Oct 12, 2022•11 citations

Effects of water concentration in the coating solution on the wall relaxation rate of octadecyltrichlorosilane coated rubidium vapor cells

Guiying Zhang, Lihua Wei, Meiling Wang +1 more

High quality anti-relaxation surface coatings for atomic vapor cells are essential for the preservation of atomic spin coherence and the enhancement of measurement sensitivity. In this paper, we studied the effects of water concentration in octadecyltrichlorosilane (OTS) coating solution on the relaxation rate and its reproducibility of OTS coated Rubidium vapor cells. We found that appropriate water concentration can improve the anti-relaxation performance of OTS coated cells.

Journal of Applied Physics•Jan 28, 2015•24 citations

High quality anti-relaxation coating material for alkali atom vapor cells

M. V. Balabas, K. Jensen, W. Wasilewski +5 more

We present an experimental investigation of alkali atom vapor cells coated with a high quality anti-relaxation coating material based on alkenes. The prepared cells with single compound alkene based coating showed the longest spin relaxation times which have been measured up to now with room temperature vapor cells. Suggestions are made that chemical binding of a cesium atom and an alkene molecule by attack to the C = C bond plays a crucial role in such improvement of anti-relaxation coating quality.

arXiv:0911.5274•Optics Express•Mar 9, 2010•85 citations

Surface optimization and synergistic quantification method for OTS anti-relaxation coatings

Yian Xu, Hao Xia, Jiale Quan +5 more

To enhance the anti-relaxation performance of alkali metal vapor cells in quantum sensors, a synergistic optimization and quantitative evaluation strategy for surface parameters of octadecyl-trichlorosilane (OTS) anti-relaxation coatings is proposed. By systematically adjusting solution concentration and reaction time, both the polarization retention angle and the surface polarization retention cross-section are effectively optimized, achieving a maximum retention angle of 135°. A theoretical framework is subsequently established to quantify adsorption energy based on the inherent correlation between these two surface parameters. A correction method for the retention cross-section, developed through a non-uniform wetting model, enables in-situ mapping of the kinetic contribution to adsorption behavior. Through kinetic and thermodynamic parameter extraction, the adsorption energy and Gibbs free energy of the multilayer OTS coatings are determined to be 0.13 eV, which represents a substantial reduction compared to the adsorption energy of bare glass surfaces, previously reported as 2.01 eV. Furthermore, longitudinal relaxation time measurements are carried out inside vapor cells, yielding a maximum collision count of 593, which provides strong evidence of polarization preservation capability. This approach provides both theoretical guidance and an experimental pathway for optimizing coating performance and analyzing adsorption mechanisms, thereby facilitating the development of high-performance alkali metal vapor cell materials for quantum sensing applications. • Synergistic optimization of OTS coating parameters improved polarization retention, achieving a maximum retention angle of 135° by adjusting solution concentration (2-6 mM) and reaction time (60-120 min). • A heterogeneous wetting-based synergy quantification method is developed, enabling accurate evaluation of multilayer formation and local adsorption behavior by jointly analyzing retention angle and retention cross-section. • A combined thermodynamic-kinetic modeling framework establishes quantitative correlations between adsorption energy, Gibbs free energy, and coating surface characteristics, providing theoretical guidance for anti-relaxation material design. • Longitudinal relaxation tests in coated vapor cells demonstrate a maximum collision count of 593, confirming suppressed alkali-atom adsorption and strong polarization preservation consistent with the low adsorption energy of 0.13 eV.

Defence Technology•Apr 25, 2026•0 citations
Abstract Anti-relaxation coatings play an important role in enhancing the polarization lifetime of polarized alkali-metal atoms. In this study, octadecyltrichlorosilane (OTS) was coated in spherical rubidium vapor cells fabricated using borosilicate glass with two stems as anti-relaxation coatings. An orthogonal experiment method was employed to obtain the optimal conditions. The results showed that OTS concentration is the dominant factor in the number of bounces, followed by the soaking time and molar ratio/(H2O:OTS). The optimal parameters were 6 mM of OTS, 6:1 of molar ratio/(H2O:OTS), and 80 min of soaking time. The number of bounces can be up to 200. Atomic force microscope images showed that the number and coverage ratio of clusters on the anti-relaxation coating fabricated by the optimized parameters are significantly less than the number and coverage ratio of clusters formed by other conditions. This means that the clusters in the coatings significantly affect the anti-relaxation performance. In addition, five OTS-coated cells were fabricated by A3B3C5 combination. However, the variability from cell to cell using the exact same preparation procedure can be up to 43.6%. The variability may be caused by the different aging times of the OTS solution. Because only one beaker of OTS solution was prepared, the OTS solution was pumped into the cells in sequence, not at the same time.
Antirelaxation surface coatings allow long spin relaxation times in alkali-metal cells without buffer gas, enabling faster diffusion of the alkali atoms throughout the cell and giving larger signals due to narrower optical linewidths. Effective coatings were previously unavailable for operation at temperatures above 80 °C. We demonstrate that octadecyltrichlorosilane (OTS) can allow potassium or rubidium atoms to experience hundreds of collisions with the cell surface before depolarizing, and that an OTS coating remains effective up to about 170 °C for both potassium and rubidium. We consider the experimental concerns of operating without buffer gas and with minimal quenching gas at high vapor density, studying the stricter need for effective quenching of excited atoms and deriving the optical rotation signal shape for atoms with resolved hyperfine structure in the spin-temperature regime. As an example of a high-temperature application of antirelaxation coated alkali vapor cells, we operate a spin-exchange relaxation-free atomic magnetometer with sensitivity of 6 fT/Hz and magnetic linewidth as narrow as 2 Hz.
Optically-dense alkali-metal vapor cells with low optical losses are widely used in quantum precision measurements, yet atomic behaviors in coated cells still need further study. We developed an octadecyltrichlorosilane (OTS) anti-relaxation and dielectric anti-reflection coated multipass optical cell filled with rubidium vapor at high density, and investigated the spin relaxation as well as the spin noise of the atomic ensembles. High contrast spin noise spectrum was observed and we find that the quantum coherence lifetime is equal to the classical transverse spin relaxation time. Number density measurements give the spin-exchange possibility of 14% between rubidium atoms trapped in the coating.
We present an experimental investigation of alkali atom vapor cells coated with a high quality anti-relaxation coating material based on alkenes. The prepared cells with single compound alkene based coating showed the longest spin relaxation times which have been measured up to now with room temperature vapor cells. Suggestions are made that chemical binding of a cesium atom and an alkene molecule by attack to the C = C bond plays a crucial role in such improvement of anti-relaxation coating quality.
To enhance the anti-relaxation performance of alkali metal vapor cells in quantum sensors, a synergistic optimization and quantitative evaluation strategy for surface parameters of octadecyl-trichlorosilane (OTS) anti-relaxation coatings is proposed. By systematically adjusting solution concentration and reaction time, both the polarization retention angle and the surface polarization retention cross-section are effectively optimized, achieving a maximum retention angle of 135°. A theoretical framework is subsequently established to quantify adsorption energy based on the inherent correlation between these two surface parameters. A correction method for the retention cross-section, developed through a non-uniform wetting model, enables in-situ mapping of the kinetic contribution to adsorption behavior. Through kinetic and thermodynamic parameter extraction, the adsorption energy and Gibbs free energy of the multilayer OTS coatings are determined to be 0.13 eV, which represents a substantial reduction compared to the adsorption energy of bare glass surfaces, previously reported as 2.01 eV. Furthermore, longitudinal relaxation time measurements are carried out inside vapor cells, yielding a maximum collision count of 593, which provides strong evidence of polarization preservation capability. This approach provides both theoretical guidance and an experimental pathway for optimizing coating performance and analyzing adsorption mechanisms, thereby facilitating the development of high-performance alkali metal vapor cell materials for quantum sensing applications. • Synergistic optimization of OTS coating parameters improved polarization retention, achieving a maximum retention angle of 135° by adjusting solution concentration (2-6 mM) and reaction time (60-120 min). • A heterogeneous wetting-based synergy quantification method is developed, enabling accurate evaluation of multilayer formation and local adsorption behavior by jointly analyzing retention angle and retention cross-section. • A combined thermodynamic-kinetic modeling framework establishes quantitative correlations between adsorption energy, Gibbs free energy, and coating surface characteristics, providing theoretical guidance for anti-relaxation material design. • Longitudinal relaxation tests in coated vapor cells demonstrate a maximum collision count of 593, confirming suppressed alkali-atom adsorption and strong polarization preservation consistent with the low adsorption energy of 0.13 eV.