Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Optics

Planar diffractive grating for magneto-optical trap application: fabrication and testing

Guochao Wang, Gaopeng Xue, Qihang Zhai, Junhao Zhu, Kangning Yu, Guangyao Huang, Min Wang, Aihua Zhong, Lingxiao Zhu, Shuhua Yan, Xinghui Li

Published Sep 29, 2021• 42 citations
Publisher

Abstract

The design, fabrication, and demonstration of a planar two-dimensional-crossed reflective diffractive grating are proposed to construct a novel optical configuration, to the best of our knowledge, potentially applied for atom cooling and trapping in a magneto-optical trap. Based on the proposed single-beam single-exposure scheme by means of an orthogonal two-axis Lloyd’s mirrors interferometer, we rapidly patterned a ∼ 1 µ m period grating capable of providing a uniform intensity of the diffracted beams. The key structural parameters of the grating including the array square hole’s width and depth were determined, aiming at providing a high energy of the diffracted beams to perform the atom cooling and trapping. To guarantee the diffracted beams to be overlapped possibly, we adopted a polarized beam splitter to guide the optical path of the incident and zero-order diffracted beams. Therefore, one zero-order diffracted beam with a retroreflected mode and four first-order diffracted beams with appropriate optical path constructed a three-dimensional optical configuration of three orthogonal pairs of counterpropagating beams. Finally, three pairs of the counterpropagating cooling laser beams with 9 mm diameter and > 10 % diffraction efficiencies were achieved, and the circular polarization chirality, purity, and compensation of the desired diffracted beams are further evaluated, which preliminarily validated a high applicability for the magneto-optical trap system.

DOI
10.1364/ao.429932

Related papers

Design and optimization of a high-efficiency and robust 2D grating for the magneto-optical trap

Elaheh Karooby, Jiazhen Li, Amit Kumar Agrawal +1 more

Diffraction gratings integrated into an atomic, molecular, and optical (AMO) setup offer a compact and efficient route toward atom cooling and trapping, thus preparing magneto-optical traps (MOT) for insertion into future scalable quantum systems. Here, we propose and numerically validate a two-dimensional (2D) grating that satisfies the required optical conditions for laser cooling: radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction. The grating, composed of a 2D array of cylindrical nanoholes, is optimized using RCWA in combination with a Genetic Algorithm (GA). It efficiently diffracts normally incident 780 nm circularly polarized light into the four first orders, each achieving a diffraction efficiency of 0.24, of which 99.7% has the correct circular handedness. This design significantly improves axial radiation pressure balance, potentially eliminating the need for the neutral density (ND) filters that were previously required in grating-MOTs (GMOTs) employing 2D gratings to compensate for the radiation pressure imbalance. The grating's robustness ensures manufacturing resilience.

Low-Dimensional Materials and Devices•Sep 17, 2025•0 citations

Magneto-optical trap with a hollow grating and an additional retroreflected laser beam

Akifumi Takamizawa, Ryohei Hokari, Sota Kagami +5 more

A magneto-optical trap of cesium atoms was generated by applying a circularly polarized cooling laser beam onto a reflective two-dimensional diffraction grating with an aperture and by retroreflecting the incident beam passing through the aperture while reversing the circular polarization. The cooling laser beams comprised the incident, retroreflected, and four diagonally diffracted beams at an angle of 50° with respect to the normal direction of the grating surface. The intensity of the retroreflected beam was carefully adjusted to balance the radiation forces acting on the atoms. A significant number of cold atoms (7.0 × 106) were captured, in spite of the difficulty in a magneto-optical trap of cesium atoms, using nonorthogonal cooling beams owing to the high nuclear spin. The significance of the retroreflected beam in the trapping process was highlighted when the intensity of the retroreflected beam was reduced, resulting in the absence of trapped atoms. Notably, the cold atom cloud was generated near the edge of the region, where all the cooling beams were overlapped. The phenomenon is explained by the numerical calculations of the radiation forces considering all the Zeeman sublevels in the cooling transition and the Gaussian intensity profile of the incident beam.

arXiv:2412.11502•Applied Physics Letters•Jun 16, 2025•4 citations

High-efficiency 2D grating design for the magneto-optical trap: enhancing intensity balance and reducing optical complexity

Elaheh Karooby, Jiazhen Li, Amit Kumar Agrawal +1 more

Integrated diffraction gratings offer a compact route to magneto-optical traps (MOTs) for atom cooling and trapping, thus preparing MOTs for future scalable quantum systems. Although segmented tri-gratings ensure axial radiation pressure balance, they are limited in optical trapping volume. Planar 2D gratings, though offer larger trapping regions, suffer from low diffraction efficiency and the resulting axial pressure imbalance, necessitating the use of a neutral density (ND) filter to achieve this balance. We present a numerically optimized 2D diffraction grating design that overcomes these limitations and satisfies the required optical conditions for laser cooling, namely, radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction, thus achieving an optical molasses—a necessary condition in MOT. Using rigorous coupled-wave analysis and a genetic algorithm, we design a grating for Rb87 grating MOT (GMOT) that achieves a 24% first-order diffraction efficiency, of which 99.7% have the correct circular handedness. These properties enable efficient atom cooling without an ND filter when used with a flat-top beam inside the vacuum chamber. Our design simplifies optical alignment, reduces system footprint, and advances the integration of GMOTs into compact quantum devices.

arXiv:2503.12212•Optical Engineering•Aug 21, 2025•4 citations

Design and optimization of grating chip for compact magneto-optical trap

Jing Dong, Xiao‐Kuan Li, Wei Li

Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.

Applied Optics and Photonics China (AOPC)•Oct 28, 2025•0 citations

Two-dimensional grating magneto-optical trap

Eric Imhof, Benjamin Stuhl, Brian L. Kasch +3 more

We demonstrate a two-dimensional (2D) grating magneto-optical trap (GMOT) with a single input cooling laser beam and a planar diffraction grating using $^{87}\mathrm{Rb}$. This configuration increases experimental access when compared with a traditional 2D magneto-optical trap (MOT). As described in the paper, the output flux is several hundred million rubidium atoms/s at a mean velocity of 16.5(9) m/s and a velocity distribution of 4(3) m/s standard deviation. We use the atomic beam from the 2D GMOT to demonstrate loading of a three-dimensional (3D) GMOT with $2.46(7)\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms. Methods to improve output flux are discussed.

arXiv:1703.07926•Physical Review A•Sep 29, 2017•52 citations

Diffraction-Engineered Metasurfaces in Magneto-Optical Trapping toward Compact Cold Atom Systems

Thu Hac Huong Le, Sota Kagami, Ryohei Takei +4 more

Cold atoms produced in magneto-optical traps (MOTs) have underpinned advances in emerging quantum technologies, including quantum computing, precision metrology, and fundamental physics. Grating-based MOT (gMOT), which employs a reflective diffraction grating to enable laser cooling from a single incident beam, offers a compact alternative to conventional six-beam MOTs. However, the inherent asymmetry of gMOT beam geometry can compromise the trapping stability and efficiency, particularly for atomic species with complex internal level structures. Here, we present a geometric-phase dielectric metasurface that simultaneously engineers the transmitted and diffracted wavefronts with desired polarization states, enabling full MOT operation under axial illumination using a single planar optical element. This metasurface-based architecture restores the symmetry in the trapping forces while preserving the compactness and simplicity of gMOTs. Using this approach, we demonstrate the trapping and cooling of cesium─an atomic species widely regarded as challenging for standard gMOT implementations─and analyze the trapping mechanism through numerical calculations. By providing independent control over key trapping parameters within a planar and alignment-simplified platform, this work establishes a route toward compact, robust, and species-flexible cold-atom systems, thereby expanding the applicability of miniaturized MOTs for integrated quantum technologies.

ACS Photonics•Jun 9, 2026•0 citations
The design, fabrication, and demonstration of a planar two-dimensional-crossed reflective diffractive grating are proposed to construct a novel optical configuration, to the best of our knowledge, potentially applied for atom cooling and trapping in a magneto-optical trap. Based on the proposed single-beam single-exposure scheme by means of an orthogonal two-axis Lloyd’s mirrors interferometer, we rapidly patterned a ∼ 1 µ m period grating capable of providing a uniform intensity of the diffracted beams. The key structural parameters of the grating including the array square hole’s width and depth were determined, aiming at providing a high energy of the diffracted beams to perform the atom cooling and trapping. To guarantee the diffracted beams to be overlapped possibly, we adopted a polarized beam splitter to guide the optical path of the incident and zero-order diffracted beams. Therefore, one zero-order diffracted beam with a retroreflected mode and four first-order diffracted beams with appropriate optical path constructed a three-dimensional optical configuration of three orthogonal pairs of counterpropagating beams. Finally, three pairs of the counterpropagating cooling laser beams with 9 mm diameter and > 10 % diffraction efficiencies were achieved, and the circular polarization chirality, purity, and compensation of the desired diffracted beams are further evaluated, which preliminarily validated a high applicability for the magneto-optical trap system.
Diffraction gratings integrated into an atomic, molecular, and optical (AMO) setup offer a compact and efficient route toward atom cooling and trapping, thus preparing magneto-optical traps (MOT) for insertion into future scalable quantum systems. Here, we propose and numerically validate a two-dimensional (2D) grating that satisfies the required optical conditions for laser cooling: radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction. The grating, composed of a 2D array of cylindrical nanoholes, is optimized using RCWA in combination with a Genetic Algorithm (GA). It efficiently diffracts normally incident 780 nm circularly polarized light into the four first orders, each achieving a diffraction efficiency of 0.24, of which 99.7% has the correct circular handedness. This design significantly improves axial radiation pressure balance, potentially eliminating the need for the neutral density (ND) filters that were previously required in grating-MOTs (GMOTs) employing 2D gratings to compensate for the radiation pressure imbalance. The grating's robustness ensures manufacturing resilience.
A magneto-optical trap of cesium atoms was generated by applying a circularly polarized cooling laser beam onto a reflective two-dimensional diffraction grating with an aperture and by retroreflecting the incident beam passing through the aperture while reversing the circular polarization. The cooling laser beams comprised the incident, retroreflected, and four diagonally diffracted beams at an angle of 50° with respect to the normal direction of the grating surface. The intensity of the retroreflected beam was carefully adjusted to balance the radiation forces acting on the atoms. A significant number of cold atoms (7.0 × 106) were captured, in spite of the difficulty in a magneto-optical trap of cesium atoms, using nonorthogonal cooling beams owing to the high nuclear spin. The significance of the retroreflected beam in the trapping process was highlighted when the intensity of the retroreflected beam was reduced, resulting in the absence of trapped atoms. Notably, the cold atom cloud was generated near the edge of the region, where all the cooling beams were overlapped. The phenomenon is explained by the numerical calculations of the radiation forces considering all the Zeeman sublevels in the cooling transition and the Gaussian intensity profile of the incident beam.
Integrated diffraction gratings offer a compact route to magneto-optical traps (MOTs) for atom cooling and trapping, thus preparing MOTs for future scalable quantum systems. Although segmented tri-gratings ensure axial radiation pressure balance, they are limited in optical trapping volume. Planar 2D gratings, though offer larger trapping regions, suffer from low diffraction efficiency and the resulting axial pressure imbalance, necessitating the use of a neutral density (ND) filter to achieve this balance. We present a numerically optimized 2D diffraction grating design that overcomes these limitations and satisfies the required optical conditions for laser cooling, namely, radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction, thus achieving an optical molasses—a necessary condition in MOT. Using rigorous coupled-wave analysis and a genetic algorithm, we design a grating for Rb87 grating MOT (GMOT) that achieves a 24% first-order diffraction efficiency, of which 99.7% have the correct circular handedness. These properties enable efficient atom cooling without an ND filter when used with a flat-top beam inside the vacuum chamber. Our design simplifies optical alignment, reduces system footprint, and advances the integration of GMOTs into compact quantum devices.
Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.
We demonstrate a two-dimensional (2D) grating magneto-optical trap (GMOT) with a single input cooling laser beam and a planar diffraction grating using 87Rb^{87}\mathrm{Rb}87Rb. This configuration increases experimental access when compared with a traditional 2D magneto-optical trap (MOT). As described in the paper, the output flux is several hundred million rubidium atoms/s at a mean velocity of 16.5(9) m/s and a velocity distribution of 4(3) m/s standard deviation. We use the atomic beam from the 2D GMOT to demonstrate loading of a three-dimensional (3D) GMOT with $2.46(7)\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms. Methods to improve output flux are discussed.
Cold atoms produced in magneto-optical traps (MOTs) have underpinned advances in emerging quantum technologies, including quantum computing, precision metrology, and fundamental physics. Grating-based MOT (gMOT), which employs a reflective diffraction grating to enable laser cooling from a single incident beam, offers a compact alternative to conventional six-beam MOTs. However, the inherent asymmetry of gMOT beam geometry can compromise the trapping stability and efficiency, particularly for atomic species with complex internal level structures. Here, we present a geometric-phase dielectric metasurface that simultaneously engineers the transmitted and diffracted wavefronts with desired polarization states, enabling full MOT operation under axial illumination using a single planar optical element. This metasurface-based architecture restores the symmetry in the trapping forces while preserving the compactness and simplicity of gMOTs. Using this approach, we demonstrate the trapping and cooling of cesium─an atomic species widely regarded as challenging for standard gMOT implementations─and analyze the trapping mechanism through numerical calculations. By providing independent control over key trapping parameters within a planar and alignment-simplified platform, this work establishes a route toward compact, robust, and species-flexible cold-atom systems, thereby expanding the applicability of miniaturized MOTs for integrated quantum technologies.