Cold atoms produced in magneto-optical traps (MOTs) have underpinned advances in emerging quantum technologies, including quantum computing, precision metrology, and fundamental physics. Grating-based MOT (gMOT), which employs a reflective diffraction grating to enable laser cooling from a single incident beam, offers a compact alternative to conventional six-beam MOTs. However, the inherent asymmetry of gMOT beam geometry can compromise the trapping stability and efficiency, particularly for atomic species with complex internal level structures. Here, we present a geometric-phase dielectric metasurface that simultaneously engineers the transmitted and diffracted wavefronts with desired polarization states, enabling full MOT operation under axial illumination using a single planar optical element. This metasurface-based architecture restores the symmetry in the trapping forces while preserving the compactness and simplicity of gMOTs. Using this approach, we demonstrate the trapping and cooling of cesium─an atomic species widely regarded as challenging for standard gMOT implementations─and analyze the trapping mechanism through numerical calculations. By providing independent control over key trapping parameters within a planar and alignment-simplified platform, this work establishes a route toward compact, robust, and species-flexible cold-atom systems, thereby expanding the applicability of miniaturized MOTs for integrated quantum technologies.
Cold atoms produced in magneto-optical traps (MOTs) have underpinned advances in emerging quantum technologies, including quantum computing, precision metrology, and fundamental physics. Grating-based MOT (gMOT), which employs a reflective diffraction grating to enable laser cooling from a single incident beam, offers a compact alternative to conventional six-beam MOTs. However, the inherent asymmetry of gMOT beam geometry can compromise the trapping stability and efficiency, particularly for atomic species with complex internal level structures. Here, we present a geometric-phase dielectric metasurface that simultaneously engineers the transmitted and diffracted wavefronts with desired polarization states, enabling full MOT operation under axial illumination using a single planar optical element. This metasurface-based architecture restores the symmetry in the trapping forces while preserving the compactness and simplicity of gMOTs. Using this approach, we demonstrate the trapping and cooling of cesium─an atomic species widely regarded as challenging for standard gMOT implementations─and analyze the trapping mechanism through numerical calculations. By providing independent control over key trapping parameters within a planar and alignment-simplified platform, this work establishes a route toward compact, robust, and species-flexible cold-atom systems, thereby expanding the applicability of miniaturized MOTs for integrated quantum technologies.
Integrated diffraction gratings offer a compact route to magneto-optical traps (MOTs) for atom cooling and trapping, thus preparing MOTs for future scalable quantum systems. Although segmented tri-gratings ensure axial radiation pressure balance, they are limited in optical trapping volume. Planar 2D gratings, though offer larger trapping regions, suffer from low diffraction efficiency and the resulting axial pressure imbalance, necessitating the use of a neutral density (ND) filter to achieve this balance. We present a numerically optimized 2D diffraction grating design that overcomes these limitations and satisfies the required optical conditions for laser cooling, namely, radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction, thus achieving an optical molasses—a necessary condition in MOT. Using rigorous coupled-wave analysis and a genetic algorithm, we design a grating for Rb87 grating MOT (GMOT) that achieves a 24% first-order diffraction efficiency, of which 99.7% have the correct circular handedness. These properties enable efficient atom cooling without an ND filter when used with a flat-top beam inside the vacuum chamber. Our design simplifies optical alignment, reduces system footprint, and advances the integration of GMOTs into compact quantum devices.
Abstract Laser-cooled atoms are a key technology for many calibration-free measurement platforms—including clocks, gyroscopes, and gravimeters—and are a promising system for quantum networking and quantum computing. The optics and vacuum hardware required to prepare these gases are often bulky and not amenable to large-volume manufacturing, limiting the practical realization of devices benefiting from the properties of cold atoms. Planar, lithographically produced optics including photonic integrated circuits, optical metasurfaces (MSs), and gratings offer a pathway to develop chip-scale, manufacturable devices utilizing cold atoms. As a demonstration of this technology, we have realized laser cooling of atomic Rb in a grating-type magneto-optical trap (MOT) using planar optics for beam launching, beam shaping, and polarization control. Efficient use of available light is accomplished using MS-enabled beam shaping, and the performance of the planar optics MOT is competitive with Gaussian-beam illuminated grating MOTs.
Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.
Magneto-optical traps (MOTs), indispensable to cold-atom-based quantum computing and quantum precision measurement, are increasingly desired in compact and stable form. Particularly, the six-beam 3D-MOT, distinguished by symmetric geometry and superior trapping performance, finds particularly broad applications. Conventional implementations, however, rely on complex and bulky free-space optics, hindering miniaturization, practical assembly, and long-term stability. Here, we demonstrate a compact six-beam 3D-MOT system that employs two multifunctional optical metasurface chips to implement the optical-field functionalities required for cooling and trapping atoms. By combining two metasurface chips and a vacuum cell, a photonic-integrated cell module (PICM) is implemented as the core assembly and the volume is only" 73*73*107 mm^3" . In success, 1.3 * 10^3 Rb atoms are trapped and cooled to the temperature of ~183 μK. It should be noticed that the laser beam is guided to the metasurface through optical fiber, thus such fully fiber-coupled architecture enables straightforward and stable operations. We believe that this work would pave a practical route toward compact and portable 3D-MOT.
Abstract Laser-cooled atoms are increasingly being used to realise practical quantum devices, motivating the development of compact and robust atom sources. Grating magneto-optical traps (gMOTs) simplify the cold-atom source architecture but are typically vapour-loaded and provide limited atomic flux. Here we explore the loading of gMOTs from cold-atom beams. We numerically simulate loading to show that unbalanced diffracted beams deflect incoming atoms away from the trap centre, thereby strongly constraining radial loading. In contrast, axial loading injects atoms directly into the trapping volume and largely avoids these effects. We experimentally demonstrate rapid axial loading of a gMOT, achieving loading rates of 2.1×109 2.1 × 10 9 atoms s −1 using a moving optical molasses to transfer atoms from a 2D MOT into the gMOT. These results establish axial loading as a robust route to high-flux gMOT operation for portable cold-atom systems.
Diffraction gratings integrated into an atomic, molecular, and optical (AMO) setup offer a compact and efficient route toward atom cooling and trapping, thus preparing magneto-optical traps (MOT) for insertion into future scalable quantum systems. Here, we propose and numerically validate a two-dimensional (2D) grating that satisfies the required optical conditions for laser cooling: radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction. The grating, composed of a 2D array of cylindrical nanoholes, is optimized using RCWA in combination with a Genetic Algorithm (GA). It efficiently diffracts normally incident 780 nm circularly polarized light into the four first orders, each achieving a diffraction efficiency of 0.24, of which 99.7% has the correct circular handedness. This design significantly improves axial radiation pressure balance, potentially eliminating the need for the neutral density (ND) filters that were previously required in grating-MOTs (GMOTs) employing 2D gratings to compensate for the radiation pressure imbalance. The grating's robustness ensures manufacturing resilience.