Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Spectral Hole Burning for Ultra-stable Lasers

Shuo Zhang, Nemanja Lučić, Nicolas Galland, Rodolphe Le Targat, Alban Ferrier, Philippe Goldner, Bess Fang, Signe Louise Seidelin, Yann Le Coq

Published Jun 21, 2021• 2 citations
Publisher

Abstract

Spectral hole burning in rare earth doped crystal can provide frequency references based on the optical transition of the dopant ions [1] . The narrow spectral patterns can be used to improve laser frequency stabilization [2] , [3] and provide a new generation of ultra-stable lasers with lower thermal noise benefiting from the cryogenic environment and better quality factor of the crystal than the amorphous glass typically used in the Fabry-Perot cavity. We utilize Europium doped yttrium silicon oxide (Eu:YSO) in our experiments, which allow realization of long lived (hours or more depending on temperature) narrow spectral holes ( kHz or less) well suited for high precision experiment applications. We will describe our novel double-heterodyne detection method [4] , used to decrease the detection noise, as well as experiments assessing quantitatively the sensitivity of the spectral pattern to crystal deformation [5] , [6] , application of electric field [7] and temperature fluctuations. We currently demonstrate a state-of-the-art laser frequency stability at 1.7 × 10 − 15 at 1s [4] , limited by the latter effect, for which improvement strategies have been demonstrated elsewhere [2] and which we are currently implementing. The other effects which we have quantitatively studied are compatible with a few 10 − 18 frequency stability at 1s time scale. This work is particularly promising in the context of optical frequency lattice clocks, for which the ultra-stable laser used for probing the clock transition is a strong limiting factor of the frequency stability.

DOI
10.1109/cleo/europe-eqec52157.2021.9542106

Related papers

Sub-Kelvin Spectral Hole Burning in Eu:YSO for Laser Frequency Stabilisation

A Robbes, Y Yuan, Philippe Goldner +4 more

As basic building blocks for quantum devices, ultra-stable lasers have a profound impact on various fields. Longer laser coherence times enhance the performance of quantum sensors, computers, communications, and optical clocks. Although optical lattice clocks have accomplished significant high-precision measurements, they often fall short of their quantum projection noise limits due to dead times during atom preparation: the instability in the laser frequency introduces stochastic fluctuations during the interrogation of atomic transitions (Dick effect). High-resolution optical clock comparisons are crucial for evaluating their accuracy and could lead to a redefinition of the SI second based on optical transitions [1].However, the most common technique for achieving ultra-stable lasers, the Pound-Drever-Hall method with Fabry-Perot cavities, faces thermal noise limitations of the cavities. To overcome these constraints, alternative methods such as Spectral Hole Burning (SHB) in rare-earth-doped crystals (REICs) have been explored. Indeed, REICs experience inhomogeneous broadening due to local lattice distortions caused by the size difference between dopant and host ions. An SHB protocol, which creates narrow spectral features through selective depletion of specific dopant ion populations using narrow-linewidth lasers, allows to overcome the inhomogeneous broadening and fully exploit the coherence of rare-earth ions. At cryogenic temperatures, Eu:YSO crystal exhibit persistent Spectral Holes a few kHz narrow and with a lifetime up to 10 h, at 4 K [2], making it a high-precision frequency reference, ideal for intermediate-timescale sensing.We report recent experimental progress on SHB in Eu:YSO crystals at specific sub-K dilution temperature setpoints that cancel the thermal sensitivity of the hole frequency [3]. The latest recorded performances on our experiment reach a fractional frequency stability of 4.10-16 at 1 s [4], which is close to the perfomance of our reference cavity at LTE. Therefore, a second SHB setup is needed for our future stability comparisons. On one front, we rationalize our SHB protocol and investigate new optimal burning parameters as well as test various doping concentrations to achieve the narrowest possible spectral holes on both setups. On another, we continue to further improving the laser frequency lock onto spectral holes, by cancelling as many systematic noise sources as possible. We provide the performances of our Michelson interferometer to reject frequency noise induced on light propagation to the crystal and by the cryostat acoustic vibrations. In addition, we explore a group delay measurement technique via phase modulation to enhance the precision on the pointing of the center of spectral holes. This should help removing slow frequency drifts due to asymmetric burning of the hole while it is probed by the laser.

•Sep 16, 2025•0 citations

Toward a highly stable master laser for the interrogation of SYRTE’s Sr and Hg optical lattice clocks

Olivier Gobron, Katharina Predehl, Daniele Nicolodi +5 more

We report on the current developments of an ultra-stable laser based on spectral hole burning spectroscopy of rare-earth doped crystal at cryogenic temperature. Narrow spectral holes and error signal have been demonstrated with a heterodyne method.

Conference on Lasers and Electro-Optics•Jan 1, 2016•0 citations

Spectral Hole Burning for Ultra-stable Lasers

Nicolas Galland, Signe Louise Seidelin, Alban Ferrier +7 more

We report on the measurement of uniaxial stress sensitivities of the spectral holes in rare earth doped crystal. This provides the necessary information for ab initio calculation of the acceleration sensitivity for a given crystal geometry, and provides the necessary base for optimizing the mounting of the crystal so as to decrease the vibration induced frequency instability. Furthermore, we report on a novel double heterodyne detection scheme which we have shown can be used to decrease the detection noise when locking a laser to the central frequency of a spectral hole, and thereby allows us to obtain a laser with fractional frequency instability of 1.7×10-15@ 1 s.

Joint Conference of the IEEE International Frequency Control Symposium and International Symposium on Applications of Ferroelectrics (IFCS-ISAF)•Jul 1, 2020•0 citations

Double-heterodyne probing for an ultra-stable laser based on spectral hole burning in a rare-earth-doped crystal

Nicolas Galland, Nemanja Lučić, S. Zhang +7 more

We present an experimental technique for realizing a specific absorption spectral pattern in a rare-earth-doped crystal at cryogenic temperatures. This pattern is subsequently probed on two spectral channels simultaneously, thereby producing an error signal allowing frequency locking of a laser on the said spectral pattern. Appropriate combination of the two channels leads to a substantial reduction in detection noise, paving the way to realizing an ultra-stable laser for which the detection noise can be made arbitrarily low when using multiple channels. We use this technique to realize a laser with a frequency instability of 1.7 × 1 0 − 15 at 1 s, not limited by the detection noise but by environmental perturbation of the crystal. This is comparable with the lowest instability demonstrated at 1 s to date for rare-earth-doped crystal stabilized lasers.

arXiv:2004.01752•Optics Letters•Feb 28, 2020•24 citations

Detection Techniques and Fundamental Limits in Frequency Stabilization via Spectral Hole Burning

Michael Hartman, Xiuji Lin, Benjamin Pointard +5 more

This poster presents the status of the development of an ultra-frequency stable laser via a spectroscopic technique known as Spectral Hole Burning (SHB). In short, we can use a pump laser to imprint, or ’burn’, transmissive spectral lines, or ’spectral holes’, in the otherwise inhomogeneously broadened absorptive spectral sites of a Eu3+ doped Y2SiO5 crystal. We can then lock a probe laser to these narrow spectral features achieving our frequency stabilized laser. Of great concern is the frequency stability of the spectral holes, such as their sensitivity to temperature changes which we characterize here. Additionally, a challenge this experiment faces is the restriction of probe laser power to avoid damaging the spectral features. This sets a relatively high level of shot noise, limiting the detection sensitivity. Here we present our solution to overcome this difficulty by using a multi-spectral- hole probing scheme to average the probing signals of several burned spectral holes.

•Nov 8, 2023•0 citations

Laser Hole Burning Spectroscopy: A High Resolution Probe of Molecular Environments.

R. M. Macfarlane, Robert M. Shelby

Laser induced hole burning in optical absorption bands of low temperature solids has been investigated with emphasis on mechanisms for population hole burning, the interactions with the environment which limit the hole widths and the use of hole burning for ultra high resolution spectroscopy. Hole burning was observed in a wide range of solids including organic and organometallic molecules in crystals and rare earth ions in crystals and glasses. The mechanisms for hole burning also varied widely and a new mechanism involving optically induced nuclear spin flips of near neighbor nuclei was discovered. Examples of hole burning in new classes of materials are presented here for the first time, namely inorganic glasses (silicate glasses containing Nd(3+), Pr(3+) or Eu(3+)) and undoped stoichiometric compounds (e.g., EuP5O14). Hole recovery was used to determine nuclear spin lattice relaxation rates in praseodymium doped crystals. For allowed optical transitions (e.g., singlet states of zinc porphyrin, dibromoindigo and color centers in alkali halides) the hole widths at 2K are limited by population decay to approximately 50 MHz. For longer lived optical levels in crystalline materials, e.g., those containing rare earth ions, the hole widths are narrower (less than 10 MHz) and are limited by dynamical interactions with surrounding nuclei. In amorphous materials such as europium doped silicate glass, hole widths are much broader, being limited by low frequency tunneling motions. Hole burning measurements were complemented by time domain coherent transient (photon echo, and optical free decay) measurements of homogeneous linewidths which enabled us to measure optical resonances as narrow as 760 Hz in Eu(3+):Y2O3.

Final Report•Jun 1, 1981•0 citations
Spectral hole burning in rare earth doped crystal can provide frequency references based on the optical transition of the dopant ions [1] . The narrow spectral patterns can be used to improve laser frequency stabilization [2] , [3] and provide a new generation of ultra-stable lasers with lower thermal noise benefiting from the cryogenic environment and better quality factor of the crystal than the amorphous glass typically used in the Fabry-Perot cavity. We utilize Europium doped yttrium silicon oxide (Eu:YSO) in our experiments, which allow realization of long lived (hours or more depending on temperature) narrow spectral holes ( kHz or less) well suited for high precision experiment applications. We will describe our novel double-heterodyne detection method [4] , used to decrease the detection noise, as well as experiments assessing quantitatively the sensitivity of the spectral pattern to crystal deformation [5] , [6] , application of electric field [7] and temperature fluctuations. We currently demonstrate a state-of-the-art laser frequency stability at 1.7 × 10 − 15 at 1s [4] , limited by the latter effect, for which improvement strategies have been demonstrated elsewhere [2] and which we are currently implementing. The other effects which we have quantitatively studied are compatible with a few 10 − 18 frequency stability at 1s time scale. This work is particularly promising in the context of optical frequency lattice clocks, for which the ultra-stable laser used for probing the clock transition is a strong limiting factor of the frequency stability.
As basic building blocks for quantum devices, ultra-stable lasers have a profound impact on various fields. Longer laser coherence times enhance the performance of quantum sensors, computers, communications, and optical clocks. Although optical lattice clocks have accomplished significant high-precision measurements, they often fall short of their quantum projection noise limits due to dead times during atom preparation: the instability in the laser frequency introduces stochastic fluctuations during the interrogation of atomic transitions (Dick effect). High-resolution optical clock comparisons are crucial for evaluating their accuracy and could lead to a redefinition of the SI second based on optical transitions [1].However, the most common technique for achieving ultra-stable lasers, the Pound-Drever-Hall method with Fabry-Perot cavities, faces thermal noise limitations of the cavities. To overcome these constraints, alternative methods such as Spectral Hole Burning (SHB) in rare-earth-doped crystals (REICs) have been explored. Indeed, REICs experience inhomogeneous broadening due to local lattice distortions caused by the size difference between dopant and host ions. An SHB protocol, which creates narrow spectral features through selective depletion of specific dopant ion populations using narrow-linewidth lasers, allows to overcome the inhomogeneous broadening and fully exploit the coherence of rare-earth ions. At cryogenic temperatures, Eu:YSO crystal exhibit persistent Spectral Holes a few kHz narrow and with a lifetime up to 10 h, at 4 K [2], making it a high-precision frequency reference, ideal for intermediate-timescale sensing.We report recent experimental progress on SHB in Eu:YSO crystals at specific sub-K dilution temperature setpoints that cancel the thermal sensitivity of the hole frequency [3]. The latest recorded performances on our experiment reach a fractional frequency stability of 4.10-16 at 1 s [4], which is close to the perfomance of our reference cavity at LTE. Therefore, a second SHB setup is needed for our future stability comparisons. On one front, we rationalize our SHB protocol and investigate new optimal burning parameters as well as test various doping concentrations to achieve the narrowest possible spectral holes on both setups. On another, we continue to further improving the laser frequency lock onto spectral holes, by cancelling as many systematic noise sources as possible. We provide the performances of our Michelson interferometer to reject frequency noise induced on light propagation to the crystal and by the cryostat acoustic vibrations. In addition, we explore a group delay measurement technique via phase modulation to enhance the precision on the pointing of the center of spectral holes. This should help removing slow frequency drifts due to asymmetric burning of the hole while it is probed by the laser.
We report on the measurement of uniaxial stress sensitivities of the spectral holes in rare earth doped crystal. This provides the necessary information for ab initio calculation of the acceleration sensitivity for a given crystal geometry, and provides the necessary base for optimizing the mounting of the crystal so as to decrease the vibration induced frequency instability. Furthermore, we report on a novel double heterodyne detection scheme which we have shown can be used to decrease the detection noise when locking a laser to the central frequency of a spectral hole, and thereby allows us to obtain a laser with fractional frequency instability of 1.7×10-15@ 1 s.
We present an experimental technique for realizing a specific absorption spectral pattern in a rare-earth-doped crystal at cryogenic temperatures. This pattern is subsequently probed on two spectral channels simultaneously, thereby producing an error signal allowing frequency locking of a laser on the said spectral pattern. Appropriate combination of the two channels leads to a substantial reduction in detection noise, paving the way to realizing an ultra-stable laser for which the detection noise can be made arbitrarily low when using multiple channels. We use this technique to realize a laser with a frequency instability of 1.7 × 1 0 − 15 at 1 s, not limited by the detection noise but by environmental perturbation of the crystal. This is comparable with the lowest instability demonstrated at 1 s to date for rare-earth-doped crystal stabilized lasers.
This poster presents the status of the development of an ultra-frequency stable laser via a spectroscopic technique known as Spectral Hole Burning (SHB). In short, we can use a pump laser to imprint, or ’burn’, transmissive spectral lines, or ’spectral holes’, in the otherwise inhomogeneously broadened absorptive spectral sites of a Eu3+ doped Y2SiO5 crystal. We can then lock a probe laser to these narrow spectral features achieving our frequency stabilized laser. Of great concern is the frequency stability of the spectral holes, such as their sensitivity to temperature changes which we characterize here. Additionally, a challenge this experiment faces is the restriction of probe laser power to avoid damaging the spectral features. This sets a relatively high level of shot noise, limiting the detection sensitivity. Here we present our solution to overcome this difficulty by using a multi-spectral- hole probing scheme to average the probing signals of several burned spectral holes.
Laser induced hole burning in optical absorption bands of low temperature solids has been investigated with emphasis on mechanisms for population hole burning, the interactions with the environment which limit the hole widths and the use of hole burning for ultra high resolution spectroscopy. Hole burning was observed in a wide range of solids including organic and organometallic molecules in crystals and rare earth ions in crystals and glasses. The mechanisms for hole burning also varied widely and a new mechanism involving optically induced nuclear spin flips of near neighbor nuclei was discovered. Examples of hole burning in new classes of materials are presented here for the first time, namely inorganic glasses (silicate glasses containing Nd(3+), Pr(3+) or Eu(3+)) and undoped stoichiometric compounds (e.g., EuP5O14). Hole recovery was used to determine nuclear spin lattice relaxation rates in praseodymium doped crystals. For allowed optical transitions (e.g., singlet states of zinc porphyrin, dibromoindigo and color centers in alkali halides) the hole widths at 2K are limited by population decay to approximately 50 MHz. For longer lived optical levels in crystalline materials, e.g., those containing rare earth ions, the hole widths are narrower (less than 10 MHz) and are limited by dynamical interactions with surrounding nuclei. In amorphous materials such as europium doped silicate glass, hole widths are much broader, being limited by low frequency tunneling motions. Hole burning measurements were complemented by time domain coherent transient (photon echo, and optical free decay) measurements of homogeneous linewidths which enabled us to measure optical resonances as narrow as 760 Hz in Eu(3+):Y2O3.