Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Condensed Matter

A Josephson junction with h -BN tunnel barrier: observation of low critical current noise

Jifa Tian, Luis A. Jauregui, Christopher D. Wilen, Albert F. Rigosi, David B. Newell, R. McDermott, Yong P. Chen

Published Sep 14, 2021• 8 citations
Publisher

Abstract

Abstract Decoherence in quantum bits (qubits) is a major challenge for realizing scalable quantum computing. One of the primary causes of decoherence in qubits and quantum circuits based on superconducting Josephson junctions is the critical current fluctuation. Many efforts have been devoted to suppressing the critical current fluctuation in Josephson junctions. Nonetheless, the efforts have been hindered by the defect-induced trapping states in oxide-based tunnel barriers and the interfaces with superconductors in the traditional Josephson junctions. Motivated by this, along with the recent demonstration of 2D insulator h -BN with exceptional crystallinity and low defect density, we fabricated a vertical NbSe 2 / h -BN/Nb Josephson junction consisting of a bottom NbSe 2 superconductor thin layer and a top Nb superconductor spaced by an atomically thin h -BN layer. We further characterized the superconducting current and voltage ( I – V ) relationships and Fraunhofer pattern of the NbSe 2 / h -BN/Nb junction. Notably, we demonstrated the critical current noise (1/ f noise power) in the h -BN-based Josephson device is at least a factor of four lower than that of the previously studied aluminum oxide-based Josephson junctions. Our work offers a strong promise of h -BN as a novel tunnel barrier for high-quality Josephson junctions and qubit applications.

DOI
10.1088/1361-648x/ac268f

Related papers

Sources of noise in niobium-based superconducting quantum circuits

Allison Dove

Quantum computation is a fascinating field that combines novel physics with improvements in computation times and has been rapidly growing in the past few years. Using superconductors to form the qubits has the potential for large-scale computing, if the decoherence inherent in these devices can be understood and reduced. Two-level fluctuators due to defects in the materials are thought to cause changes to the Josephson critical current or the flux through the superconducting loop of a flux qubit, which leads to decoherence in the qubit. Alternatively, defects in the crystal lattice give rise to electron localization which in turn traps spins with random orientations at the substrate/metal interface, again producing decoherence. My work studied the proposed noise mechanisms by using Molecular Beam Epitaxy to fabricate single-crystal niobium-based Josephson junctions. Using RHEED, AFM, and TEM/STEM, I studied the epitaxy of the niobium film at the substrate interface to reduce noise due to crystal defects. I then measured flux noise in these films; the noise in the epitaxial films is lower than the comparative polycrystalline films. Further measurements using ex-situ Josephson junctions and epitaxial niobium loops resulted in the lowest reported flux noise measurements to date. Additionally, EELS measurements made in the course of the STEM analysis of the crystal structure reveal oxygen depletion from the substrate at elevated growth temperatures. This depletion leads to oxygen vacancies in the aluminum oxide substrate, which can in turn lead to charge traps at the substrate/metal interface and hence to decoherence in the qubit. Critical current noise was investigated by changing the oxidation dose of the alumina barrier in more than 50 separate Josephson junctions. Films which were grown with lower oxidation doses have a non-ideal critical current temperature dependence as well as higher critical current noise values, suggesting that insufficient oxygen is being incorporated into these junctions. Finally, I studied the effect of surface cleaning after fabrication for resonators and transmons. Microscopy shows that an oxygen ash and BOE dip together removes all photoresist residue from the chip. Internal-Q measurements do not show a marked improvement due to this cleaning, but the coherence times do improve upon the cleaning step.

•Jan 1, 2014•2 citations

Nitride crystalline barrier epitaxial SIS Josephson junctions by MBE

Manas Verma, Anand Ithepalli, Amit Rohan Rajapurohita +24 more

Superconductor-insulator-superconductor Josephson junctions with crystalline tunnel barriers have remained elusive by epitaxial techniques such as MOCVD or MBE that produce the junction materials and devices powering today's electronic and photonic systems like transistors and lasers. Here, we overcome the key materials hurdle to realize the first functional nitride crystalline barrier Josephson junctions by MBE. Despite an AlN barrier thickness of approximately 4.5 nm, the NbN/AlN/NbN trilayers exhibit coherent Josephson tunneling with critical current densities of approximately 17 A/cm2, an IcRn product of approximately 2.5 mV, and a superconducting gap voltage of approximately 3.7 mV with a BCS-like gap evolution with temperature. Hysteretic current-voltage characteristics and Fraunhofer current modulation with magnetic field establish underdamped SIS Josephson behavior. The realization of crystalline barrier Josephson junctions by MBE opens the doors to a richer materials palette with alloys and superlattice electrodes and tunnel barriers, as well as potential monolithic integration of superconducting quantum circuits with active electronic and photonic devices such as HEMTs and lasers.

arXiv:2611.14968•Nov 11, 2026•0 citations

Low-frequency excess noise in Nb-Al2O3-Nb Josephson tunnel junctions

Bonaventura Savo, F. C. Wellstood, John L. Clarke

A fabrication technique for Nb-Al2O3-Nb Josephson tunnel junctions is described that is an alternative to the trilayer method generally used. At 4.2 K the magnitude of the low-frequency noise in the critical current I0 of four junctions with areas 𝒜 ranging from 7.8 to 115 μm2 was characterized by S1/2I0𝒜1/2/I0 =(14±6)pA μm/μA Hz1/2, where SI0 is the spectral density of the excess noise at 1 Hz. The noise power spectrum of one 3×3 μm2 junction exhibited a Lorentzian feature associated with the emptying and filling of a single trap in the barrier. The low level of noise makes these junctions attractive for use in superconducting quantum interference devices.

Applied Physics Letters•Jun 15, 1987•74 citations

Low barrier ZrO x -based Josephson junctions

Jae‐Hong Choi, Maciej Olszewski, Luojia Zhang +8 more

The Josephson junction is a crucial element in superconducting devices, and niobium is a promising candidate for the superconducting material due to its large energy gap relative to aluminum. AlOx has long been regarded as the highest quality oxide tunnel barrier and is often used in niobium-based junctions. Here, we propose ZrOx as an alternative tunnel barrier material for Nb electrodes. We theoretically estimate that zirconium oxide has excellent oxygen retention properties and experimentally verify that there is no significant oxygen diffusion leading to NbOx formation in the adjacent Nb electrode. We develop a top–down, subtractive fabrication process for Nb/Zr–ZrOx/Nb Josephson junctions, which enables scalability and large-scale production of superconducting electronics. Using cross-sectional scanning transmission electron microscopy, we experimentally find that depending on the Zr thickness, ZrOx tunnel barriers can be fully crystalline with chemically abrupt interfaces with niobium. Further analysis using electron energy loss spectroscopy reveals that ZrOx corresponds to tetragonal ZrO2. Room temperature characterization of fabricated junctions using Simmons’ model shows that ZrO2 exhibits a low tunnel barrier height, which is promising in merged-element transmon applications. Low temperature transport measurements reveal sub-gap structure, while the low-voltage sub-gap resistance remains in the megaohm range.

arXiv:2508.11593•APL Materials•Nov 1, 2025•6 citations

Low frequency critical current noise and two level system defects in Josephson junctions

Christopher Nugroho

The critical current in a Josephson junction is known to exhibit a 1/f low frequency noise. Implemented as a superconducting qubit, this low frequency noise can lead to decoherence. While the 1/f noise has been known to arise from an ensemble of two level systems connected to the tunnel barrier, the precise microscopic nature of these TLSs remain a mystery. In this thesis we will present measurements of the 1/f low frequency noise in the critical current and tunneling resistance of Al-AlOx-Al Josephson junctions. Measurements in a wide range of resistively shunted and unshunted junctions confirm the equality of critical current and tunneling resistance noise. That is the critical current fluctuation corresponds to fluctuations of the tunneling resistance. In not too small Al-AlOx-Al junctions we have found that the fractional power spectral density scales linearly with temperature. We confirmed that the 1/f power spectrum is the result of a large number of two level systems modulating the tunneling resistance. At small junction areas and low temperatures, the number of thermally active TLSs is insufficient to integrate out a featureless 1/f spectral shape. By analyzing the spectral variance in small junction areas, we have been able to deduce the TLS defect density, n ~ 2.53 per micrometer squared per Kelvin spread in the TLS energy per factor e in the TLS lifetimes. This density is consistent with the density of tunneling TLSs found in glassy insulators, as well as the density deduced from coherent TLSs interacting at qubit frequencies. The deduced TLS density combined with the magnitude of the 1/f power spectral density in large area junctions, gives an average TLS effective area, A ~ 0.3 nanometer squared. In ultra small tunnel junctions, we have studied the time-domain dynamics of isolated TLSs. We have found a TLS whose dynamics is described by the quantum tunneling between the two localized wells, and a one-phonon absorption/emission switching rate. From the quantum limiting rate and the WKB approximation, we estimated that the TLS has a mass and tunneling distance product consistent with an atomic mass tunneling through crystal lattice distances. At higher temperatures TLSs have been found that obey a simple thermal activation dynamics. By analyzing the TLS response to an external electric field, we have deduced that the TLS electric dipole is in the order of, P ~ 1 electron-Angstrom, consistent with the TLS having the charge of one electron tunneling through a disorder potential of distances, d ~ 1 Angstrom.

•Jan 6, 2015•0 citations

Anodization-free fabrication process for high-quality cross-type Josephson tunnel junctions based on a Nb/Al-AlO x /Nb trilayer

F Adam, C. Enss, Sebastian Kempf

Abstract Josephson tunnel junctions form the basis for various superconductor electronic devices. For this reason, enormous efforts are routinely taken to establish and later on maintain a scalable and reproducible wafer-scale manufacturing process for high-quality Josephson junctions. Here, we present an anodization-free fabrication process for Nb/Al-AlO x /Nb cross-type Josephson junctions that requires only a small number of process steps and that is in general intrinsically compatible with wafer-scale fabrication. We show that the fabricated junctions are of very high quality and, compared to other junction types, exhibit not only a significantly reduced capacitance but also an almost rectangular critical current density profile. Our process hence enables the usage of low capacitance Josephson junctions for superconductor electronic devices such as ultra-low noise dc-superconducting quantum interference devices (SQUIDs), microwave SQUID multiplexers based on non-hysteretic rf-SQUIDs and RFSQ circuits.

arXiv:2403.01806•Superconductor Science and Technology•Jul 8, 2024•6 citations
Abstract Decoherence in quantum bits (qubits) is a major challenge for realizing scalable quantum computing. One of the primary causes of decoherence in qubits and quantum circuits based on superconducting Josephson junctions is the critical current fluctuation. Many efforts have been devoted to suppressing the critical current fluctuation in Josephson junctions. Nonetheless, the efforts have been hindered by the defect-induced trapping states in oxide-based tunnel barriers and the interfaces with superconductors in the traditional Josephson junctions. Motivated by this, along with the recent demonstration of 2D insulator h -BN with exceptional crystallinity and low defect density, we fabricated a vertical NbSe 2 / h -BN/Nb Josephson junction consisting of a bottom NbSe 2 superconductor thin layer and a top Nb superconductor spaced by an atomically thin h -BN layer. We further characterized the superconducting current and voltage ( I – V ) relationships and Fraunhofer pattern of the NbSe 2 / h -BN/Nb junction. Notably, we demonstrated the critical current noise (1/ f noise power) in the h -BN-based Josephson device is at least a factor of four lower than that of the previously studied aluminum oxide-based Josephson junctions. Our work offers a strong promise of h -BN as a novel tunnel barrier for high-quality Josephson junctions and qubit applications.
Quantum computation is a fascinating field that combines novel physics with improvements in computation times and has been rapidly growing in the past few years. Using superconductors to form the qubits has the potential for large-scale computing, if the decoherence inherent in these devices can be understood and reduced. Two-level fluctuators due to defects in the materials are thought to cause changes to the Josephson critical current or the flux through the superconducting loop of a flux qubit, which leads to decoherence in the qubit. Alternatively, defects in the crystal lattice give rise to electron localization which in turn traps spins with random orientations at the substrate/metal interface, again producing decoherence. My work studied the proposed noise mechanisms by using Molecular Beam Epitaxy to fabricate single-crystal niobium-based Josephson junctions. Using RHEED, AFM, and TEM/STEM, I studied the epitaxy of the niobium film at the substrate interface to reduce noise due to crystal defects. I then measured flux noise in these films; the noise in the epitaxial films is lower than the comparative polycrystalline films. Further measurements using ex-situ Josephson junctions and epitaxial niobium loops resulted in the lowest reported flux noise measurements to date. Additionally, EELS measurements made in the course of the STEM analysis of the crystal structure reveal oxygen depletion from the substrate at elevated growth temperatures. This depletion leads to oxygen vacancies in the aluminum oxide substrate, which can in turn lead to charge traps at the substrate/metal interface and hence to decoherence in the qubit. Critical current noise was investigated by changing the oxidation dose of the alumina barrier in more than 50 separate Josephson junctions. Films which were grown with lower oxidation doses have a non-ideal critical current temperature dependence as well as higher critical current noise values, suggesting that insufficient oxygen is being incorporated into these junctions. Finally, I studied the effect of surface cleaning after fabrication for resonators and transmons. Microscopy shows that an oxygen ash and BOE dip together removes all photoresist residue from the chip. Internal-Q measurements do not show a marked improvement due to this cleaning, but the coherence times do improve upon the cleaning step.
Superconductor-insulator-superconductor Josephson junctions with crystalline tunnel barriers have remained elusive by epitaxial techniques such as MOCVD or MBE that produce the junction materials and devices powering today's electronic and photonic systems like transistors and lasers. Here, we overcome the key materials hurdle to realize the first functional nitride crystalline barrier Josephson junctions by MBE. Despite an AlN barrier thickness of approximately 4.5 nm, the NbN/AlN/NbN trilayers exhibit coherent Josephson tunneling with critical current densities of approximately 17 A/cm2, an IcRn product of approximately 2.5 mV, and a superconducting gap voltage of approximately 3.7 mV with a BCS-like gap evolution with temperature. Hysteretic current-voltage characteristics and Fraunhofer current modulation with magnetic field establish underdamped SIS Josephson behavior. The realization of crystalline barrier Josephson junctions by MBE opens the doors to a richer materials palette with alloys and superlattice electrodes and tunnel barriers, as well as potential monolithic integration of superconducting quantum circuits with active electronic and photonic devices such as HEMTs and lasers.
A fabrication technique for Nb-Al2O3-Nb Josephson tunnel junctions is described that is an alternative to the trilayer method generally used. At 4.2 K the magnitude of the low-frequency noise in the critical current I0 of four junctions with areas 𝒜 ranging from 7.8 to 115 μm2 was characterized by S1/2I0𝒜1/2/I0 =(14±6)pA μm/μA Hz1/2, where SI0 is the spectral density of the excess noise at 1 Hz. The noise power spectrum of one 3×3 μm2 junction exhibited a Lorentzian feature associated with the emptying and filling of a single trap in the barrier. The low level of noise makes these junctions attractive for use in superconducting quantum interference devices.
The Josephson junction is a crucial element in superconducting devices, and niobium is a promising candidate for the superconducting material due to its large energy gap relative to aluminum. AlOx has long been regarded as the highest quality oxide tunnel barrier and is often used in niobium-based junctions. Here, we propose ZrOx as an alternative tunnel barrier material for Nb electrodes. We theoretically estimate that zirconium oxide has excellent oxygen retention properties and experimentally verify that there is no significant oxygen diffusion leading to NbOx formation in the adjacent Nb electrode. We develop a top–down, subtractive fabrication process for Nb/Zr–ZrOx/Nb Josephson junctions, which enables scalability and large-scale production of superconducting electronics. Using cross-sectional scanning transmission electron microscopy, we experimentally find that depending on the Zr thickness, ZrOx tunnel barriers can be fully crystalline with chemically abrupt interfaces with niobium. Further analysis using electron energy loss spectroscopy reveals that ZrOx corresponds to tetragonal ZrO2. Room temperature characterization of fabricated junctions using Simmons’ model shows that ZrO2 exhibits a low tunnel barrier height, which is promising in merged-element transmon applications. Low temperature transport measurements reveal sub-gap structure, while the low-voltage sub-gap resistance remains in the megaohm range.
The critical current in a Josephson junction is known to exhibit a 1/f low frequency noise. Implemented as a superconducting qubit, this low frequency noise can lead to decoherence. While the 1/f noise has been known to arise from an ensemble of two level systems connected to the tunnel barrier, the precise microscopic nature of these TLSs remain a mystery. In this thesis we will present measurements of the 1/f low frequency noise in the critical current and tunneling resistance of Al-AlOx-Al Josephson junctions. Measurements in a wide range of resistively shunted and unshunted junctions confirm the equality of critical current and tunneling resistance noise. That is the critical current fluctuation corresponds to fluctuations of the tunneling resistance. In not too small Al-AlOx-Al junctions we have found that the fractional power spectral density scales linearly with temperature. We confirmed that the 1/f power spectrum is the result of a large number of two level systems modulating the tunneling resistance. At small junction areas and low temperatures, the number of thermally active TLSs is insufficient to integrate out a featureless 1/f spectral shape. By analyzing the spectral variance in small junction areas, we have been able to deduce the TLS defect density, n ~ 2.53 per micrometer squared per Kelvin spread in the TLS energy per factor e in the TLS lifetimes. This density is consistent with the density of tunneling TLSs found in glassy insulators, as well as the density deduced from coherent TLSs interacting at qubit frequencies. The deduced TLS density combined with the magnitude of the 1/f power spectral density in large area junctions, gives an average TLS effective area, A ~ 0.3 nanometer squared. In ultra small tunnel junctions, we have studied the time-domain dynamics of isolated TLSs. We have found a TLS whose dynamics is described by the quantum tunneling between the two localized wells, and a one-phonon absorption/emission switching rate. From the quantum limiting rate and the WKB approximation, we estimated that the TLS has a mass and tunneling distance product consistent with an atomic mass tunneling through crystal lattice distances. At higher temperatures TLSs have been found that obey a simple thermal activation dynamics. By analyzing the TLS response to an external electric field, we have deduced that the TLS electric dipole is in the order of, P ~ 1 electron-Angstrom, consistent with the TLS having the charge of one electron tunneling through a disorder potential of distances, d ~ 1 Angstrom.
Abstract Josephson tunnel junctions form the basis for various superconductor electronic devices. For this reason, enormous efforts are routinely taken to establish and later on maintain a scalable and reproducible wafer-scale manufacturing process for high-quality Josephson junctions. Here, we present an anodization-free fabrication process for Nb/Al-AlO x /Nb cross-type Josephson junctions that requires only a small number of process steps and that is in general intrinsically compatible with wafer-scale fabrication. We show that the fabricated junctions are of very high quality and, compared to other junction types, exhibit not only a significantly reduced capacitance but also an almost rectangular critical current density profile. Our process hence enables the usage of low capacitance Josephson junctions for superconductor electronic devices such as ultra-low noise dc-superconducting quantum interference devices (SQUIDs), microwave SQUID multiplexers based on non-hysteretic rf-SQUIDs and RFSQ circuits.